2 audio streamings in a clip

Hi,
I pass a clip to the Media Info and I have a clip with 2 audio streamings instead of one. How can I solve that? I need to send this clip to another device and I need only one streaming of video and audio.
Thank you

It's a while since I used iMovie '08, but from memory I think the audio worked in a similar fashion to iMovie '09. In iMovie '09 you can right-click (Control-click) on a clip, then select Split Clip from the pop-up menu. First, click and drag across the clip to highlight with a yellow border the section where you wish to adjust the volume. Then right-click and choose Split Clip. The section you highlighted will now show as a separate clip.
Click on the small gear icon on the separated clip and choose Audio Adjustments from the pop-up menu. In the Inspector that opens you can adjust the volume of the clip. Also, if you have a separate music track or voiceover running under the clip, you can use the Ducking feature to reduce the volume of the other tracks. Tick the Ducking box and move the slider to the desired level. You can also fade the audio in and out on the main video track for the separated clip.
Sorry if this advice is not entirely applicable to iMovie '08 (I don't have access to that version at the moment). But this is how it works in iMovie '09, if that helps at all.
John

Similar Messages

How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.

How do I mute the audio of a video clip in PS 6

I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line

an interesting development as I proceed with the video. I guess I'm missing an integral concept here. It appears that some of my cideo clips import into the project and the segments have a blue color. These offer an option to fade in or out the audio, to mute the audio or adjust the volume.
Other vidoe clips import purple, like the still image files, and hence these do not offer any audio options, just motion objects.
So, what am I doing wrong? Why do some video clips import (purple) as image files?

Is it possible to delete the audio of a captured clip permanently?

I know you can drag clips to the timeline without audio, or delete the audio from the timeline.
What I'm asking is: say you captured a bunch of clips with audio tracks that you didn't want, because you forgot to uncheck the audio box.
Is there some way you can delete the audio from the captured clips, without re-capturing everything? I'd like to have them sitting in my browser, without any associated audio.
I know you can change whether audio is present in a logged (but uncaptured clip) using clip settings, but that only works before the clip is captured.

Just think about this for a minute before you launch
yourself off into this realm. The audio doesn't
really take that much space. DV video runs at 3.6
MB/sec 48khz audio runs at 192kB/s. The audio takes
up nothing.
You're right - it's not worth the effort. It's just a minor annoyance. It would be easier to just recapture all the clips.

TS1702 No audio when trimming a clip. Any suggestions?

I have no audio when trimming a clip. Just got the new app imovie. Any one else having this problem? Any help would be great.

start here with the safe mode thing
Songs and Other Content Do Not Play Correctly

Replace audio in multiple video clips at one time

Hello. I am new to the forum so I apologize if I break any of the rules!
I have a collection of tutorial videos, all edited but the audio had some balance issues. The files were not in Premiere Pro at the time. They are the final edited videos but then I was told the audio needed to be adjusted.
I have re-balanced the audio, saved the audio as wav files and now I need to replace the old audio (in the finished video file) with the new audio (the wav files I edited and saved). The timing is all the same. It's just a matter of replacing the current file.
Is this doable as a batch process? Is it doable in Premiere Pro or do I need to use Audition or some other Adobe software?
I hope this makes sense.
Thank you in advance!
Alan Read
SC, USA

hello ,thanks for jour mail ,but my English is very very bad sorry but
many thank for your feedback. Hav a nice Day
Am 09.12.2014 16:57, schrieb carpmusic:
>
Replace audio in multiple video clips at one time
created by carpmusic <https://forums.adobe.com/people/carpmusic> in
/Premiere Pro/ - View the full discussion
<https://forums.adobe.com/message/6998981#6998981>

Audio Waveforms (On Certain Clips Only) Not Displaying

Long time forum-lurker, first time poster.
Here's the situation: The nighttime assistant editor created a sequence of B-roll clips for an editor. On both the editor's and the assistant editor's computer, the audio waveforms for these clips are not displaying correctly. Specifically, the symptoms (on both computers) are:
- Waveforms do not appear in timeline unless zoomed in to maximum or second-to-maximum zoom. When zoomed out farther than that, the "X"es appear.
- When viewing the clip in the viewer's audio tab, either by double-clicking the sequence clip or match-framing from the sequence, the waveforms do not appear at all until I zoom in to near maximum level. When zooming out after that, the remnants of the zoomed-in waveforms remain on the screen.
- The waveforms of other clips display correctly.
I have tried deleting the waveform cache on both computers, changing the location of the waveform cache and restarting, and deleting the preferences on the editor's computer. I have not tried recreating the sequence from the original clips because the daytime assistant editor has more sequences to create and needs to use her computer.
If anyone can help me, that would be great.
Here are the specs:
Assistant Editor's Computer: eMac running Final Cut Pro 5.0.1 and Mac OS 10.4.something (I haven't gotten a chance to run software update).
Editor's Computer: Dual Processor Power Mac G5 running Final Cut Pro 5.0.4 and Mac OS 10.4.8.
Both computers are sharing the same media which is located on our SAN. The Editor's computer (along with two other G5-based editing systems) is connected via FibreChannel. The Assistant Editor's computer (along with a whole bunch of other computers) is connected through our server, which serves the SAN drives as network volumes. Assistant editors create sequences on the eMac and upload the project file to the server, where they are available for the editors to download.
Power Mac G5 and eMac Mac OS X (10.4) SAN: Xserve RAID, CommandSoft FibreJet (not Xsan). Server: Xserve (Intel model)

Don't know what's going on, but tell us the format of
the audio.
It's the audio track from a video clip. All video on this project is DV NTSC. The audio is 48.0 Khz, 16 bit, 2 mono channels.
Also, try copying
one audio clip to a local drive and see if the
problem persists.
Copied one of the offending clips onto the desktop. Dragged it into the project. Opened it in the viewer and hit the Audio tab. Whaddya know, the waveform appeared.
I cut a chunk of it into the sequence that is full of clips whose waveforms don't work and turned on "show audio waveforms". Waited for a long time and I still just got the Xes unless I zoomed in really close to the new sequence clip.
But then I cut a chunk of the newly copied clip into a brand new sequence, turned on audio waveforms in the timeline, and they showed up.
I don't know if any of this will help to solve my problem, but hopefully it will give someone an idea. I've got an editor who says he's used to editing from waveforms and needs the ability to see them. (Unfortunately, copying media to local drives is not a viable workaround. The media must stay on the SAN.)
Power Mac G5

Trying to combine audio from a video clip with a photo

Is there a way to allow the audio of a video clip to continue, while the visual is changed? I'm trying to insert a photo to replace the last few seconds of a video as the song in the video finishes.

Not at the moment. Hopefully at some point they will add a feature to independently trim the audio and video to allow this type of edit, otherwise known as an L cut.
tt2

Error message 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'

Can anyone help with the error message I'm getting 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'. I had to move the footage to another folder and now am unable to link it - just getting this error message instead.... Has anyone had to deal with this before?
Thank you!

Relink to the correct media.

Batch processing audio for separate video clips?

Hi there, new to the forums. I have roughly 100 separate video clips that either I have edited and exported out of PPro or collected from other outside sources. The video clips were recorded in a wide range of environments, producing widely varied audio levels and sound quality. The videos are for a blog.
I am hoping to create a batch process preset in Premiere Pro or Audition to normalize the audio in all of the video clips. My goal is to have the audio play back at the same volume level in all of them without having to edit the audio individually in each clip. I have been searching the forums for a while for help with a batch process solution like this. Running CS6 so have full access to all Adobe apps.
I have played around with running the clip audio through batch processing in Adobe Audition CS6. Haven't had any success thus far -- the audio doesn't save within the same video file it was pulled into Audition from. I really would like to normalize the audio without having to re-import/-re-export each separate video.
PPro group might be the wrong place to start, but figured I would start here. Is there a missing manual out there for doing something that seems relatively simple?

Premiere Pro can't do this. If Audition can't either, then you're probably stuck doing it manually. Or at least, using non-Adobe software. Possibly VirtualDub, depending on your source media.

QuickTime 7 Audio Issue (Won't play audio in certain video clips)

I'm having a problem getting audio to play with clips in QuickTime 7, and it doesn't play at all in iDVD when I drag a clip in to burn a DVD. I'm also having problems getting Final Cut Pro to play audio from time to time. Is this being caused by a recent Apple security update or is there something else going on?

Quicktime Kirk,
I have downloaded another persons inquiry because it is exactly the problem I am having. Here is his post
"I make movies of cells and convert them to quick time and insert them into powerpoint for presentations for conferences. I never had a problem with this until I upgraded to office 2004 and now many (but not all) of my movies won't play. They seem to be there but when I click play they go white as though there is only the first image. I had saved them as cinepak and or jpeg A usually with image J or older ones from the original NIH image and I can't figure out what the problem is. I even upgraded to quicktime pro to resave them as self contained but still they don't work when I insert them. I can play them all with quicktime player and when I make new ones now in image j I save them as video and that seems to work but it would be very difficult to go back and do that with everything. Does anyone know why or how to fix this?"
My additional comments would be I used the Sample_iTunes.mov from QT and it plays like a champ in PPT. My movies are all from 2004. When I save them in the QT 7.1.3 it doesn't seem to make any difference. The older movies insert into PPT as a QT icon with 4 color quadriant. Everything including .swf are now working in QT. Thanks for your help. When I go back to 7.0.3 they work but then I can't play my videos in iTunes unless I do an erase and a reinstall to get rid of the updated iTunes. Thanks
Chris

Extracted Audio longer than movie clip, please help...

I was reading some of your FAQ's about extracted audio being
recomposed with a mono instead of stereo for exported audio from a microphone or other mono device, and then importing it back into iMovie after mixing it in Quicktime, to make it stereo (albeit with only mono feed).
My question is this:
I extract the audio from the clip that I am running, and it is fine and good while within iMovie, however, once I drag and drop it to my desktop, and open it with quicktime and either play it or export it as mono to get it to play through both speakers, it uses the original
length of audio not the edited version that i pull from imovie. It is very frustrating, and I am not sure why it keeps doing this.
While it is in iMovie, the audio and video match, and are synched. But, when I export it, for some reason, it exports the original audio from the unedited clip (which has already been deleted!), and I don't know what to do to get it to export just the audio clip as it stands now within iMovie.
Any help would be appreciated.
Thanks,
Chris
G5 Mac OS X (10.4.9)

Hi Aesthesia - that is a fact of life of non-destructive editing. When audio is extracted from a shortened, cropped clip, it actually extracts the entire audio from the underlying original source clip. You can test this by extracting audio from a cropped clip, and you will find that you can, by direct editing, extend it back to its original length.
That explains why the audio file when played outside of iMovie plays at the original length.

Can you keep the audio of one video clip but add another clip?

Can you keep the audio of one video clip but add another clip?
I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

There are several way to do this;
Replace with clip...
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

2 audio streamings in a clip

Similar Messages

Maybe you are looking for