2 balance sheet and 1 storage area

Hi All,
We have a running SAP system with one company code and 1 plant.
We have a different financier that will finance the next phase of the project and hence need to see the accounting entries separately.
Both the running plant and the new project will share a warehouse/storage location.
Please suggest an enterprise structure in which MRP can be run in total and yet we can create 2 separate balance sheets.
Thanks.

Hi All,
What I am basically saying is that there is a need to have 2 company codes and one plant each.
This is simply because the people funding are different and hence need to see 2 different balance sheets.
The storage area for the material is common as the 2 company codes are in the same vicinity.
The materials will have the same material number and the stocking levels will take into consideration the demand for both the plants.
How can MRP be made common across the company codes?
Thanks!

Similar Messages

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

Configration steps for business area wise balance sheet and p&L accounts

dear all
sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
regards
babu

Hello
No seperate screen available for BA set up.
Follow the IMG, enterprsie structure, define and assign set ups.
Assign to SO / Plant /
Create cost elements and assign cost centers for each business areas.
Create clearing accounts for readjustments in BS and PL, and execute BA pl and bs adjustment programs for taxes, GRIR and some accounts, where BA is not populated.
Now you would get seperate BS for each BA
Reg
assign points if useful
dear all
sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
regards
babu

Business Area wise Balance sheet and P&L display

Hello SAP Gurus
Can anybody tell me how to configure to view, balance sheet and Profit & Loss as per business area?
Regards,
Abhijit Walke

It is a misconception that Business Areas are not recommended by SAP.
Business Areas and Profit Centres serve two different purposes and Profit Centres are NOT a replacement for BAs nor vice-versa.
We have just implemented ECC 6.0 using Business Areas and there was no indication at any stage neither from SAP nor its consultants that BAs will not be supported. There is no SAP written document that these will not be supported and if there is, I would be interested to look at it.
As for config, you may want to follow this link for details:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/5f/1fb0274aee11d189740000e8322d00/frameset.htm
Cheers.

Difference between business area balance sheet and profit centre accounting

Hi all,
I want to know what are the differences between business area balance sheet and profit centre accounting.
Please tell the merits and demerits of both.
If, I want to get plant-wise profitability of a company then which method is more recommendable and why?
Regards,
Charu Mahawar

hi,
look to that interesting thread:
Re: Business Area Vs Profit Center
Andreas
pls reward useful answers
Thank you !

Profit Center wise balance sheet and Profit and Loss account

Hi Experts,
I will explain my scenario
The is cleint having Head Office for handling procurement of goods for all branches(8) and the physical delivery happens for goods at the requested branch and GR and IR also makin at the branch level.
And we are treated each branch as profit center apart from HO(profit center).But the vendor payment should be happen from HO(prfoit center) so and they are not using automatic payment programme.
My question is
1.While doing the vendor (Branch)payment from Cash/Bank GL (HO) how the balances will be tallied ?
2.If I am using the document splitting and zero balance document clearing will it tally at the profit center level ?
3.At the period end if I will do the 1KEK T Code to transfer the payables to the profit center which profit center system will take for posting ?
Please advice me in this and I will give good points with correct answer.

Hi Edukondalu Garu,
Please find answers to your questions below:
1.While doing the vendor (Branch)payment from Cash/Bank GL (HO) how the balances will be tallied ?
Answer: The Profit Center balances will get automatically tallied due to document splitting and Zero balance account being defined properly. The automatically identifies it
2.If I am using the document splitting and zero balance document clearing will it tally at the profit center level ?
Answer: Yes that is the main criteria to get full fledged Balance sheet and P&L account by Profit Center
3.At the period end if I will do the 1KEK T Code to transfer the payables to the profit center which profit center system will take for posting ?
Anwer: With Document Splitting, you don't have to do the period end transaction in PC to transfer the account payables, accouts receivables and fixed assets. The transfer is online and real time basis.
I hope i answered all your questions.
Please feel free to get in touch with me if you need futher clarifications
Best Regards
Surya

Profit center group wise balance sheet and trading account report req

Hi.
We are using Profit ceter accounting for one of our clients.its ECC 6.0 therefore New GL is activated. FSV is not configured.
Now I want to get the reports - Profit center group wise balance sheet and trading a/c.
Can anyone help me in this regard.
Thanks in advance.
Regards,
Padmavathi

Hi Padma
the std reports S_PL0_***** serve the purpose... You can browse SAP easy access menu under FI
you can input PC or a group of PC as additional selection criteria
Ajay M

Balance sheet as per Business area

Hi gurus,
client wants business area wise balance sheet. so that I had define the 2 difference business area &i had get balance sheet as per business area. but i found that there are some stock accounts which update business area by-default & some which are not update business area properly. i couldn't understand how system behave like this?
please suggest me how to check out this issue? tell me the step how to find out the loopholes?
Warm regards,
Dhananjay Rahane.

Hello,
System get business areas from assigment customizing FI-MM.
Please call SPRO
And check customizing below.
Enterprise Structure -> Assignment -> Logistics - General -> Assign Business Area to Plant/Valuation Area and Division
Enterprise Structure -> Assignment -> Logistics - General -> Data Comparison with Sales Plant/ValArea - Div - BusArea
Further, check your material master data for division value.
Regards,
Burak

Balance Sheet and Income Statement for Plan data

Hi Everyone,
in our Company we maintain Plan in COPA for next year that is for 2009 , we have finished all the Planing activities and now (users asked me), they want to have Balance Sheet and Income Statement for the data we have in Plan version , I am not sure what they are Talking about, please help me ,
where can I set up that requirement ? and what is actually Balance Sheet and Income Statement for Plan data?
Thx
Niki

Is the issue resolved?
What did you do?
Thanks
Naveen

Urgent......BALANCE SHEET AND P&L REPORT...........urgent

Hi experts,
I have to create the balance sheet report,for this i have to use datasource 0FI_GL_10 according to SAP but there is no data coming from R3 to this datasource , hence i am using 0FI_GL_6 ,for GL transaction data.
for GL line item data i am using 0FI_GL_4.
Is it possible to create Balance sheet and P&L reports using these datasources?
<b>How can i create Balance sheet and P&L report based on these datasources.</b>
In Business Content there are virtual cubes 0FIGL_VC1 and 0FIGL_VC2 how can i use these cubes as i am not using standard basic cubes 0FIGL_C10 AND 0FIGL_C01 and i am also not using the datasource 0FI_GL_10.
I need this very urgently to get this report.
regrds.
Message was edited by:
man man

http://help.sap.com/saphelp_nw04/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
Steps-1)Load 0FI_GL_C10 cube from R/3
2)R-Click cube 0FI_GL_R10 and select option "Activate direct access" since its remote cube as otherwise you wont be able to receive data in to this cube
After loading 0FIGL_C10 goto 0FI_GL_V11 to check if you see data in this cube and then start building queries .
No physical loading of data in 0FI_GL_R10 and 0FI_GL_V11 cube as its Remote cube and Virtual cube.
I followed these steps. According to your datasources try following these steps and make sure you create a Virtual cube. The above link shows the standard query for Balance P&L. I have done for 0FI_GL_1 datasource. For this infosource i created standard cube and virtual cube. I guess in virtual cube you should get the data 0GL_ACCOUNT, Key figues 0VAL_FLOW & 0VAL_STOCK . Please go through the below link for more information regarding these objects.
Re: 0GLACCEXT vs 0GL_ACCOUNT - How it is USED?
Regards
Naga

Differenciating between Balance Sheet and P&L Reports

Hi,
From a SAP BI perspective, is it a right way to differenciate between Balance Sheet and P&L Reports based on Account Type ( IS- for P&L Reporting and BS- for balance sheet reporting).
Thanks
Rashmi.

If your General Ledger accounts, for the Chart of Accounts in use in your R3/ECC source environment, have the account type populated for each account as BS for Balance Sheet accounts and IS for Income Statement (P&L) accounts, then that should work for separating accounts for Balance Sheet and P&L reporting.
However, if this doesn't always hold true, another way you can do this is by using the XBILK (Indicator: Account is a balance sheet account?) field on SKA1 where X denotes a Balance Sheet account and blank denotes an Income Statement account.
Either way, you should validate with your FI Functional Consultant or FI business person to determine that your thought or the alternative I provided is correct. I say this because there may be reconciliation accounts that will are identified as Income Statement accounts, but the business doesn't want them to be reported (and in most cases they aren't reported - at least in my experiences).

3KEH? Additional balance sheet and P&L accounts EC-PCA

Hi experts,
I have a question concerning transaction/funcionality 3KEH (Choose Additional Balance Sheet and P&L Accounts).
Can you explain me in generall which accounts you should maintain here and which not?
It's clear that some P&L accounts, for which no cost element exists (e.g. taxes) can be connected with a specific profit center.
Question: if not all other p&l accounts should be posted on the dummy profit center?
I am especially interested in MM (accounts). do we have to maintain these accounts (OBYC - BSX) here? I Think the profit center is connected via material?
which accounts do you maintain here?
Thanks a lot in advance
Butch

Hi Eli,
thanks for your answer.
"All B/S accounts that you want to be managed in PCA tables". Does that mean if we want to manage the B/S accounts for materials, we have to maintain them there with the Dummy profit center?
otherwise the B/S material accounts are not shown in PCA?
in general we want to manage all B/S accounts in PCA to report the segments with full balance sheet and P&L.
thanks
Butch

Adding Custom 1 dimension to all Balance Sheet and all PL accounts

We added the Custom 1 dimension to all Balance Sheet and all PL accounts. Previously we only had a the Custom 1 dimension added to a few PL accounts.
Now it takes a very long time to consolidate and we are getting warnings in the log files as follows:
One example:
The Node cube Scenario = Actual, 1, Year = 2009 2009, Entity = MS_UKD 589, InputValueID = USD 17, contains 110182 records
We are consolidating a month that does not have any data in the product lines for the accounts where the product lines were added.
Is this slowness in consolidation to be expected when doing this?
Is there any rule or best practice to adding the custom 1 dimension to a volume of accounts?
Thanks!

Essentially, customs are more like sub-accounts than extra dimensions. The warning you got is not new, but this may be the first time you've noticed it. The node is a subcube that must be completely loaded to RAM on the server to do the consolidations. Take your accounts and multiply by custom 1 to see how many additional records are going into the sub cube (2797 x 232 = 648,904). You may want to have your DBA watch the server as you consolidate to see how many resources are being used and if he/she can tweak some settings to help out.
That being said, my system has 6000 accounts, 2500 custom 1, and 1000 custom 2, but only 600 entities total in 3 hierarchies. Our full consolidation takes an hour, but doing only impacted for the current month takes about 20 minutes.

BEST Practice for Balance sheet and Investment Planning

hi all
I need the Best Practice guides for Balance sheet and Investment Planning
where can i get it ?
if someone has them please could you mail them to [email protected]
also if someone has documentation regarding these please forward them also
Points assured
Thanks in advance
Nidhi

Hi Nidhi,
Refer to the below link for the available scenarios
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm

Discrepancy between Balance sheet and Aging report

HI Experts,
I have a client who run the AR Aging and Balance sheet monthly for as their month end procedures.
They have found the following:
When the Balance Sheet and Aging report is run on the same day this shows the same on the Accounts Receivable and the Aging report.
When the Aging is run a few days after the month end, and the Aging Date is selected as 05/01/2010, the Posting Date untill is also 05/01/2010, the Balance Sheet To date is 05/01/2010 I get discrepancies between the 2 amounts.
I looked for documents with later Posting/Document dates but could not find any in the aging report.
Any help would be welcome.
Marli

Hi Marli,
You may check these threads:
Re: Mismatch in Accounts Receivable Balance and A/R Aging Balance due
Re: customer aging query - show balance as of a specific date
Thanks,
Gordon

2 balance sheet and 1 storage area

Similar Messages

Maybe you are looking for