2 BI systems are connected to one SAP ECC-system

HI,
I have the following situation: we have one SAP ECC-system, and there is already one BI-system for one company code connected. I would like to connect now a second BI-system for another company code. Both BI-system uses more or less the same infocubes in controlling. I would like to copy all data sources in the ECC, so that I have every datasource twice, one for the first BI-system and 2 for the second BI-system.
I thougth I could use transacioin code ROS2 for this. I created the datasource Z_CO_OM_CCA_1 and would like to use the function module BWOM_RS_GET_CTRCST and the extract structure ICCTRCST like the standard datasource 0CO_OM_CCA_1. During saving I get the error message TABLES-parameter E_T_DATA is missing - what does this mean?
Is there another solution for my problem?
I appreciate any kind of help!
Thank's a lot
Christine

Christine,
I would recommend to have a, lets say, maximum number of selection fields available and nothing BW-system specific. So as I mentioned before, no need to have the same datasources twice. In case of some, e.g. the logistics datasources, this might also be a enhancement/development that might be totally out of your budget. (Think about the setup tables, the processes to fill them....)
regards
Siggi

Similar Messages

Connect one SAP ECC 6.0 source system to 2 SAP BW system

Hi!
I copied SAP BW system (e.g. BW1 --> BW2).
My source SAP BW system "BW1" was connected to SAP source system "MM5" (tcode RSA1).
Now I would like to connect my new SAP BW system "BW2" also to this SAP source system "MM5".
When I do so I get the following error:
Connection cannot be used.
Connection BA is used in the MM5:400
source system as a connection BW1CLNT001 to BW
Do you want to delete this connection in the source system?
Question:
Can one SAP ECC system be connected to 2 SAP BW system?
If yes, what are the steps to do this?
Thank you!

Thank you very much!
The question still is how to proceed with the following dialog screen/warning?
Connection cannot be used.
Connection BA is used in the MM5:400
source system as a connection BW1CLNT001 to BW
Do you want to delete this connection in the source system?
YES or NO
Thank you!

Connect one SAP BW system to multiple R/3 systems

Hi All,
Has anyone done a connection of one SAP BW system to multiple SAP R/3 systems. I know it is theretically possible, but please let me know if anybody has experience of doing it. Our scenario is that take HR data from one R/3 system and other modules data from another R/3 system.
Also please let me know the steps of connecting the systems, the do's and dont's and any special config that needs to be done.
Also what are the risks?
Thanks in advance.
Regards,
Rajib

Hello,
after you connected the new source system, there are some additional steps to do. But this is common for all new source systems:
-> Set conversion of source system names in RSA1. This is necessary for Transport of Objects in BW. Go to RSA1->Tools->Conversion of Logical System Names
-> Set Assignment of Source System to Source System ID. You also find this under RSA1-> Tools. This is only important if you use a Source system ID like in IO 0SOURSYSTEM.
-> Replicate Application Component Structure of DataSources. Therefore go to DataSources. Select your Source System (If you are on BI 7.0) and go to the Header, right click you mouse and replicate Tree Metadata and then replicate DataSource.
Best regards,
Peter

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

External System Handling Units to SAP ECC System and Pack Outbound DO

Hi Guru
Packing Is done in External System for SAP ECC Sales Order Before Outbound Delivery Creation.
How to capture External System Handling Units in to SAP ECC System and Pack Outbound Delivery Line Items.
Please help
Thanks In Advance
SR

Bit of a cart-before-the-horse situation here.
Lets assume that your business process goes ahead and creates a delivery note, but leaves it unpicked and unpacked. Picking and packing will occur with the inbound IDoc from your external system.
Map the external system data into a basic IDoc type DELVRY0X. I think the current one is DELVRY07.
Use an inbound IDoc message type SHPCON to carry the external system data into your ECC system.
The process code DELV works well with DELVRY0X inbounds. It has lots of user exits. You will need them because you will need a determination process to know which delivery note to update with the external system data.
When you map the handling unit data correctly into the IDoc, the process code will create the handling units on your delivery. The external handling unit numbers should end up in VEKP- EXIDV.
Regards,
zKen

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Error while registering SAP ECC system in UWL systems

hi,
Error while registering SAP ECC system in UWL systems.
Errors:
System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner '132.147.0.112:sapgw00' not reached
TIME        Thu Nov 27 16:12:05 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     2
Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
After configuration changes in the backend system, you must re-register the system.
regards.
Srinivas.

Hi,
you can check few things prior proceeding:
Does your connector test after adding your backend system in portal works fine?
Did you define a system alias?
Make sure your SSO is working,
Also check your Jco detination webdynpro tab.
Regards,
Vamshi.

Extracting Values of a Field from a Database Table in SAP ECC System

Hi,
I downloaded Extracting Values of a Field from a Database Table in SAP ECC System Using MII 12.0
senario from sdn. I'm trying to do that senario in MII 12.05. But I have problem with section 6 in page 7 (you can supply senario from sdn)
"6- Under the loop of Repeater, use action u2018Rowu2019 to append just the string part of the WA which will display only values for field u2018Batchu2019"
I did not find WA elemen in Output element of Repeater_0
How can I create WA element?
Thanks.

Cemil,
Set up a SAP JCo Interface action block. Use the RFC name RFC_READ_TABLE.
In the link editor map the table to "MARA", set RowCount to something small (20 is good sample size) and create an xml transaction property named FIELDS and copy the following into it:
<?xml version="1.0" encoding="UTF-8"?><FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET/>
        <LENGTH/>
        <TYPE/>
        <FIELDTEXT/>
      </item>
    </FIELDS>
Then link the Transaction.FIELDS to SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/TABLES/FIELDS}. You may run into problems with two other fields and optionally they can be removed (set link type to remove xml). I usually remove them initially for testing. The two fields are:
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/NO_DATA}
SAP_JCo_Interface_0.Request{/RFC_READ_TABLE/INPUT/DELIMITER} (or you can set this to something like a semicolon,";" or tilda,"~". I find it easier to caclulate position by length, but that is my own idiosyncrasy.)
Once you get this one working, we can explore how to do filtering on the dataset. Your output should be something like this:
<?xml version="1.0" encoding="utf-8"?>
<RFC_READ_TABLE>
<INPUT>
    <DELIMITER />
    <NO_DATA />
    <QUERY_TABLE>MARA</QUERY_TABLE>
    <ROWCOUNT>20</ROWCOUNT>
    <ROWSKIPS>0</ROWSKIPS>
</INPUT>
<TABLES>
    <DATA>
      <item>
        <WA>000000000000000023ROH 00000000</WA>
      </item>
      <item>
        <WA>000000000000000038HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000043HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000058HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000059HIBE 00000000</WA>
      </item>
      <item>
        <WA>000000000000000068FHMI 00000000</WA>
      </item>
      <item>
        <WA>000000000000000078DIEN 00000000</WA>
      </item>
      <item>
        <WA>000000000000000088FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000089FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000098HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000170NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000178NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000188NLAG 00000000</WA>
      </item>
      <item>
        <WA>000000000000000288HALB 00000000</WA>
      </item>
      <item>
        <WA>000000000000000358HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000359HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000521HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000578FERT 00000000</WA>
      </item>
      <item>
        <WA>000000000000000597HAWA 00000000</WA>
      </item>
      <item>
        <WA>000000000000000598VERP 00000000</WA>
      </item>
    </DATA>
    <FIELDS>
      <item>
        <FIELDNAME>MATNR</FIELDNAME>
        <OFFSET>000000</OFFSET>
        <LENGTH>000018</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Number</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>MTART</FIELDNAME>
        <OFFSET>000018</OFFSET>
        <LENGTH>000004</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Material Type</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>BSTME</FIELDNAME>
        <OFFSET>000022</OFFSET>
        <LENGTH>000003</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Purchase Order Unit of Measure</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>XCHPF</FIELDNAME>
        <OFFSET>000025</OFFSET>
        <LENGTH>000001</LENGTH>
        <TYPE>C</TYPE>
        <FIELDTEXT>Batch management requirement indicator</FIELDTEXT>
      </item>
      <item>
        <FIELDNAME>DATAB</FIELDNAME>
        <OFFSET>000026</OFFSET>
        <LENGTH>000008</LENGTH>
        <TYPE>D</TYPE>
        <FIELDTEXT>Valid-From Date</FIELDTEXT>
      </item>
    </FIELDS>
    <OPTIONS />
</TABLES>
</RFC_READ_TABLE>
Add a repeater sourced on:
SAP_JCo_Interface_0.Response{/RFC_READ_TABLE/TABLES/DATA/item}
Link your repeater output to a tracer with this:
Repeater_0.Output{/item/WA}
What you will see in each tracer message is a single line of data with all the fields contents concatenated together. You can look up what each field in the string represents by the length of the field as returned in the Response segment of the RFC_READ_TABLE rfc. Then you can parse out the data you are interested in.
Give this a try and let me know how you succeeded.
By the way, I could not find the scenario you referred to. Can you post a link?
Regards,
Mike
Edited by: Michael Appleby on Jan 12, 2009 5:16 PM

Setting required to create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system

Dear Experts,
Can you please suggest me list of activities require to automatically create Business partner record in SAP GTS for the customer who transferred from the SAP ECC system .
i.e If I create the customer master record and transfer the same CMR to SAP GTS , what are the setting requires to maintain in SAP GTS sytem to automatically create the Business partner .
Ram

Hi Raghu,
Below are the main settings required to enable you to transfer Customer Master Data to SAP GTS. Please note that their is a difference between, Customer Master Record and Customer Master Data in terms of data and for GTS, we transfer Customer Master Data. Hence, below are the settings required:-
In SAP ECC system:-
Activate the change pointers for Customer Master Data apart from enabling basic connection settings.
Schedule a job to run at regular intervals to transfer all the customer master data for the available change pointers to the SAP GTS system
2. In SAP GTS system:-
Maintain the Mapping for ECC Customers to SAP GTS Business Partners in the General settings area of the SPRO in SAP GTS system
Ensure that the Number range is maintained for those GTS Business Partners.
Also, some time you may be required to maintain the organisational structure to ensure full working.
I hope this will be helpful to you.
Regards,
Aman

SAP GRC 10 - PSS Access from SAP ECC System

I have configured Password Self Service in GRC System and is working perfectly fine for all password resets if access provided to NWBC from GRC System.
We have requirement to provide end users to reset password using SAP ECC System only. I have tried to access NWBC using SAP ECC System but is giving me error that Menu not configured or roles not assigned.
Currently Maintain Data Sources is configured as below
User Search Data Sources , User Detail Data Sources & User Authentication Data Sources set to ECC Connector and End User Vertification Set to yes.We are not using LDAP / Active Directory for the User Search Database and instead ECC Only
Can anyone provide the roles to be assigned in SAP ECC System to access NWBC - Password Reset .

Hi Anil,
In support to Colleen's comments, It seems that you have not configured the USER on the End User Services. You need to make sure that the guest user (not available in GRC) is configured in each of the 10 services in SICF for the end user Login Pages to work.
Here are the 10 required services to be activated:
1.)GRAC_OIF_MY_PROFILE_EU
2.)GRAC_GAF_NAME_CHANGE_SERV_EU
3.)GRAC_POWL_REQUEST_STATUS_EU
4.)GRAC_GAF_PWD_SELFSERVICE_EU
5.)GRAC_OIF_USER_REGISTER_EU
6.)GRAC_GAF_ACCREQ_WITH_REQREF_EU
7.)GRAC_OIF_REQUEST_SUBMISSION_EU
8.)GRAC_GAF_ACCREQ_WITH_TEMPL_EU
9.)GRAC_GAF_ACCREQ_WITH_USEREF_EU
10.)GRAC_UIBB_END_USER_LOGIN
You can refer note#http://service.sap.com/sap/support/notes/1628387
If the user is not present in GRC system then, they have to go with end-user-logon page to reset their passwords where you can always define the user authentication configurations.
Regards,
Ameet
Message was edited by: Ameet kumar

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

Copy BEx Query from one SAP BI system to another SAP BI system?

Experts please help me to Copy a BEx Query from one SAP BI system to another SAP BI system?
Thanks in Advance.......

HI,
Just assume like below,
you are creating your query in Development server(BI),
Before creating query, you go to SE09(t code), here you create a workbench request by clicking the create button.
Give some description here to be identified by you in future.
Now a requested will be generated(ex: DW5K50098) with prefix of your server name.
now you go to query designer, you create query, when you save the query, it will ask you request, now you click button 'own request'. you choose request(create by you in SE09).
it will be saved under this request, now you will have one more request under your request in SE09
parent request(DW5K50098) and child request(DW5K50099).
First you click child request and relese(click lorry button in se09),second you click parent request and lorry button.
next steps will be related to your organization, you can ask your team leader, he will be taking care of it.
Regards,
Ranganath.

How to install BI-CONT 7.37 in SAP ECC system EHP 5

Hi SAP Gurus,
We recently upgraded BI_CONT in our BW landscape(SAP netweaver 7.3) from 7.36 to 7.37
What is the strategy to upgrade BI _CONT or corresponding changes in SAP ECC system(EHP 5).
Currently we don't have BI_CONT installed in our ECC system.
KIndly, let me know how to upgarde BI_CONT related objects.
Earlier we used to use custom extractors and data sources in ECC system for BI_CONT now we business has planned to use all standard data sources.
Question here is do we need to install BI_CONT in SAP ECC and what is the procedure?
Thanks,
Avadhesh
+91 8095226536

Hi Avadhesh,
No need to upgrade or install add-on BI CONTENT in ECC system if you have already BI landscape for doing BI functions.
BI content includes below functionality which can be installed as an add on in ECC when you dont have BI landscape.
DataSources
Process chains
InfoObjects
InfoSources
Transformations
InfoProvider (InfoCubes and DataStore objects)
Variables
Data mining models
Queries
Workbooks
Web templates
Roles
Aggregation level
Planning function
Planning function type
SAP Crystal Reports (BI Content Ext.)
SAP BusinessObjects Dashboards (BI Content Ext.)
Regards,
Karthik

How to check how many source systems are connected to my BW system?

Hi friends
how to check how many source systems are connected to my BW system?
Regards
BN

Hi All,
Thanks a lot for your help. its resolved now with your help.
Regards
BN

2 BI systems are connected to one SAP ECC-system

Similar Messages

Maybe you are looking for