2 broken macbook pros into 1 working one ?

The models that I have are: 13 inch MacBook Pro retina from 2013 and the other is a Macbook Pro 15 inch.
The 13 inch won't turn on due to about half a small cups water spillage and the 15 inch has physical damage on the outside and won't turn on either.I was wondering would it be possible to swap certain parts to make my 13 inch macbook work ?
I do not have a warranty to cover damages.

Sorry, not possible.
Ask Apple about their Flat Rate Depot repair.

Similar Messages

Install an SSD from my old macbook pro into a new one without reformat - time machine problem!

Hi all!
I've bought a new macbook pro 13" 2012 to replace my old macbook pro 2010.
In my old macbook pro 2010 I was using an Sandisk 480 SSD that has everything working and installed, as I sold the old one, I put my hard drive and format it to sell to my friend.
In the new macbook 2012, I soon I receive it, I replace the HDD with my old SSD an everything works normally except some problems that I'm discovering now!
MY new macbook boot without no problems and until now every software that I've testes is working ok! Some of them ask me to register again but all of them is working.
My problems starts with my VPN configuration, the new macbook looses all my VPN connections, but as it wasn't so much (only 6) I'm reconfiguring them as I need it.
My worst problem is happening with time machine backup. When I start my mac with the tima machine disk, it ask me if I want to inherit the old backups and I click to accept it, but the systems spends a lot of time searching for the time machine disk and them shows an error telling that is impossible to write on the disk.
I've checked the disk in disk utility and it's mounted as read/write. But I've tried to create a new directory on the disk and receive an error of operation denied!
What or where should I look to solve this problem?? Thanks!

You can resolve that by installing the 10.6.6 Combo Updater instead of the smaller incremental updater.
+BTW, you should never use a version of OS X that's older than the version that shipped with the computer.+

Using my boot hard drive from an older Macbook pro into a new one?

Hi,
I put my hard drive from my older Macbook pro 15" 2.16 Ghz Core2 Duo computer (Mac 10.6.4) into my new Macbook pro 2.4 GHz (2010) as my boot drive. Since then I've upgraded to 10.6.6 and everything seems fine.
My concern is that since my OS was installed on a different computer, I might not have all the proper drivers for my new machine. Can this be the case? Does the OS install all drivers for all models all the time? Sometimes I wonder if my graphics card drivers are installed because it seems slower than I expect, but the graphics card shows up in System Profiler.
Thanks!
Jason

You can resolve that by installing the 10.6.6 Combo Updater instead of the smaller incremental updater.
+BTW, you should never use a version of OS X that's older than the version that shipped with the computer.+

How much does apple charge to fix a broken macbook pro screen?

How much does apple charge to fix a broken macbook pro screen?

No one here would know for sure...my guess? Somewhere around US $700. You'll get it done cheaper at a third-party repair shop.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time con

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

One of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason

Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405

AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way.

AirDrop transfer between Mac mini (late 2012) and MacBook Pro (late 2008) works only one way. I see both machines on both airdrop windows. Firewalls on both machines are set exactly the same way, and with Network Browser set to allow. Can send a file from Mac mini to MacBook, but not the other way. Never get a window asking to accept on the Mac mini.
Found no useful documentation on AirDrop anywhere in the whole support site.

Maybe this will work. From an Apple support article.
You can also use the Share button to send files to your neighbors via AirDrop. In a Finder window, select the item you want to share, and then click the Share button in the toolbar. For more information about the Share button, see this help topic:

Macbook pro is not working with Canon pixma iP1500, but has previously. The printer works with an old PC without trouble. "printer is offline" message when this printer is plugged into macbook. Any clues to get it to work?

Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?

Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Broken Macbook Pro won't finish copying even with target disk mode. Help!

Hi,
I'm helping someone with a Macbook Pro 2010-11. It worked for a few years but eventually degraded last month when it wouldn't go 10 minutes without displaying the rainbow loading ball. Possibly a hard drive problem.
The owner never backed any of the computer up. I am trying to salvage their data before it's lost. The computer can power on. I have been turning the computer on and salvaging most of the data from numerous trips with USBs until it crashes, and then moving on to Target Disk Mode. The computer turns on slowly, displays the rainbow ball every minute or so, and never finishes copying or exporting anything. It still seems to be degrading.
I still need two things: One is a large folder with thousands of old OUTLOOK e-mails created on an old PC (which the owner no longer has).
Second is the folder/autobackup where OUTLOOK for Mac stores all the e-mails and settings.
I have found the folder -- I think it is the Main Identity or Office Identities. Am I correct? Will this bring back OUTLOOK on the newer Macbook Pro exactly like on the old one? I also know where the old e-mails folder is, but when I try to transfer either folder through Target Disk Mode on the newer Macbook Pro, it stops and gives me the "Some data in _____.olk14msgsource could not be read or written." AKA error code -36, halfway through the transfer.
I have tried exporting OUTLOOK on the broken Macbook Pro to a .olm, but it gets stuck halfway and gets stuck back on the rainbow ball. Then I shut the computer off. I have also tried going into the folders through target disk mode and deleting the .olk14msgsource files that are problematic, but there are too many of them.
Please help! The owner needs these files and OUTLOOK exactly like it was!
Thanks!

Tried connecting the cable? Still won't start?
If you are still under warranty and/or have AC, call them & let them deal w/it.
OOW: Take the MBP to your local AS or an AASP. Diagnostic testing is FREE!
http://support.apple.com/kb/TS1365 Intel-Based Apple Portables: Troubleshooting a computer that will not power on

Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

MacBook Pro 2009
Model Identifier: MacBookPro5,1
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Software OS X 10.8.5 (12F45)
Iphoto '11
Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
"Your photo library is either in use by another application or has become unreadable"
Offered solution doesn't work:
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
I can't download photographs from my iphone or my digital camera.
Any ideas on how I can solve this problem?
There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
Many thanks,
Ed

I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network.

The sound on my Macbook Pro does not work.

The sound on my Macbook Pro does not work. When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done. I went into system preferences, but there aren't any options there that I can see to change it.

"Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
Au contraire. TS1574's title and affected products are thusly:
"Troubleshooting issues with no audio from built-in speakers on Macs
Products Affected Mac mini, MacBook, MacBook Pro, iMac"
As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
2. Remove any external audio devices from USB, firewire, etc.
3. Open Sys Prefs > Sound > Output
If Internal Speakers is listed, select it and test again.
If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
If mute is selected, unselect it.
If the volume slider is low, raise the volume.
If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
I hope it gets resolved for you. Good luck.

My Thunderbolt-port equipped 15" Macbook Pro (Early 2011) works with other monitors but not with my Thunderbolt Display.

I just got a thunderbolt monitor and excitedly, I plugged my early 2011 thunderbolt port equipped 15" Macbook Pro (running 10.8.2) into it and... no image on the monitor.
Ok, so I know that the TB display works because I plugged a mid-2012 13" Macbook Pro into it (running 10.7.5) and it works perfectly. In fact, I'm using it to type this message right now.
Other details:
- in both the displays preference pane and about this mac/system info, the 15" mbp recognizes the display, yet... no picture either clamshell open or closed. restarted with it plugged in and not plugged in, no difference. also? sound comes through the monitor.
- ALSO, i plugged in a mini displayport monitor into the 15" port, and it displayed fine, so the port seems to be doing something.
see my conundrum?

It should just work - if it's not working with your 2011 model (works just fine with my 15" late 2011, right out of the box) I would get in touch with AppleCare as soon as possible and see what the senior techs may have to say...
Clinton

The sound on my macbook pro is not working

The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
HELP!!

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

2 broken macbook pros into 1 working one ?

Similar Messages

Maybe you are looking for