2 cffform(s) on one single cfm template
Hello,
Does any one know if there are any way to use two cffform on
one signle template? I tried two different cffrom tags but it's
only load the first form. Second form doesn't seem to work. Is it a
limitation of Flash format in cfform?
thanks for any help or pointer.
PN
Adam,
Thanks for the info, I went through my codes and found a
mistake. One of my include template did have cfform tag in it, this
cause the other form not to load on my page. After I clear out that
mess out, my forms load correctly but there was a BIG GAP between
form.
<cfform name="Navmenu" format="flash" width="100%"
height="200" style="themeColor:##2B52FF;
formBorderStyle:'roundCorners'; topMargin: 0; leftMargin:2;" >
</cfform>
<cfform name="getContacts" preservedata="yes"
format="flash" width="100%" height="200"
style="themeColor:##2B52FF; formBorderStyle:'roundCorners';
leftMargin:2;" >
</cfform>
Any idea?
Thanks,
PN
Similar Messages
-
Allocation of multiple expenses in single posting template
Hi
With reference to Message 843069, we would like to suggest improvement to enable multiple allocation of expenses to respective departmental segments using a single Posting Template when each expense is allocated in various proportions of 100% among its Departments.
Example
Allocation of Stationery expense (1000 00) to its Department (1000 01) 1
and (1000 02) 2 at 50% each and allocation of Postage expense (2000 00)
to its Department (2000 01) 1 at 60% and (2000 02) 2 at 40%.
We need these allocations to be saved in a single Posting Template to
create a single Journal Entry at one goal.
Kedalene ChongIf you are using multiple queries then how are you designing the final web template, I meant are you doing data binding for queries with web tempaltes and then insert all the templates in to a main template?
or are you just using multiple table web items and using a single template for all the queries?
If you have Javascript then try using multiple templates for multiple queries and write the javascript for the related template and then put all in a main template. -
How to use one single boolean button to control a multiple while loops?
I've posted the attached file and you will see that it doesn't let me use local variable for stop button, but I need to stop all the action whenever I want but more than one single button on the front panel would look ugly... The file represents the Numeric Mode of
HP 5371A. thanks for your time
Attachments:
NUMERIC.vi 580 KBIn order to use a local variable, you can change the mechanical action of stop button (Switch When Pressed will work), or create a property node for it and select values. You'll also have to do a lot of work changing those for loops into while loops so that you can abort them.
-
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report
When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
- When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed. The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
Requirements:
There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
server to SAP R/3. The selection screen parameters would be:
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
to SAP R/3. When this transaction is executed, it should not have the 'Logical
Filename' parameter anymore on the selection-screen. Instead it should only have
Local File name on the presentation server:
Sales Organization:
Distribution Channel:
Division:
The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
Logical Filename:
Sales Organization:
Distribution Channel:
Division:
So how should I make these parameters invisible depending on the transaction codes execution.
I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
I have an idea of using SY-TCODE.
EX:
AT SELECTION-SCREEN OUTPUT.
IF SY-TCODE = 'ZJPVCS303'.
LOOP AT SCREEN.
IF SCREEN-GROUPID = 'GRP'.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF SY-TCODE = 'ZJPVCS303_US'.
LOOP AT SCREEN.
IF .....
ENDLOOP.
ENDIF.
ENDIF.
But I am not able to get the output which I require. Please help me out.Hello Rani
Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
PARAMETERS:
p_as_fil TYPE filename MODIF ID unx, " e.g. Unix server
p_pc_fil TYPE filename MODIF ID wnd. " e.g. Windows PC
AT SELECTION-SCREEN OUTPUT.
CASE syst-tcode.
* transaction(s) for upload from server (AS)
WHEN 'ZJPVCS303.
LOOP AT screen.
IF ( screen-group1 = 'UNX' ).
screen-input = 0.
screen-invisible = 1.
MODIFY screen.
ENDIF.
ENDLOOP.
* transaction(s) for upload from local PC (PC)
WHEN 'ZJPVCS303_US.
LOOP AT screen.
IF ( screen-group1 = 'WND' ).
screen-input = 0.
screen-invisible = 1.
MODIFY screen.
ENDIF.
ENDLOOP.
WHEN others.
ENDCASE.
Regards
Uwe -
Hello!
I'm trying to save a very large PDF file. I'm using Adobe Acrobat X Pro. There are about 200 plus pages and I'm trying to save merged PDF files as one single PDF document. I've compressed the PDF's as much as I could prior to saving. For some reason, the process of saving it as a single file takes a long time and usually doesn't work. Will a higher version of Adobe be faster? I was told that Adobe X is a 32 bit program and that could be why it's running slow. I'm unfamiliar with how it all works so I'm hoping someone could offer a simple explanation as to why this is happening and a solution on how to make something as simple as saving a document, go faster.
Thank you!
cBest to keep the replies in the other post, but I wanted to comment on something you said "I was told that Adobe X is a 32 bit program and that could be why it's running slow." Yes, it's a 32 bit program. No, it's complete nonsense to say that 32 bit programs run slow. There seems to be a general belief that 64 bit is better because, well, because, um, because it's a bigger number so it must be, right? Sorry, I'm not mocking you, but there is such nonsense about this, that I think software makers are having to put a lot of effort into making 64 bit software for no good reason at all.
-
ADF: How to get the attributes' values of one single row from a table?
Currently I have a table with 3 attributes, suppose A,B and C respectively. And I've added an selectionListener to this table. That means when I select one single row of this table, I wish to get the respective value of A, B and C for that particular row. How do I achieve this?
suppose the method is like:
public void selectionRow(SelectionEvent se) { //se is the mouse selection event
.......??? //what should I do to get the values of A\B\C for one single row?
Edited by: user12635428 on Mar 23, 2010 1:40 AMHi
Assuming you are using Jdev 11g.
Try with this
public void selectionRow(SelectionEvent se) {
String val = getManagedBeanValue("bindings.AttributeName.inputValue");
public static Object getManagedBeanValue(String beanName) {
StringBuffer buff = new StringBuffer("#{");
buff.append(beanName);
buff.append("}");
return resolveExpression(buff.toString());
public static Object resolveExpression(String expression) {
FacesContext facesContext = getFacesContext();
Application app = facesContext.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = facesContext.getELContext();
ValueExpression valueExp =
elFactory.createValueExpression(elContext, expression,
Object.class);
return valueExp.getValue(elContext);
Vikram -
How to club many sales orders in to one single invoice document number
Dear Team,
We are in to contract for 12 years with our client for a particular service,so we will raise a contract order for a particular item,with this we generate the order number,here we are generating some 150 orders numbers,this 150 order number I want to combine in to one single invoice document number,I have tried this in vf01 I am giving the all 150 document numbers,and excuting this but here for each sales order document number it is creating one billing document number,but I need one single invoice number for all this order numbers.
My copy controls are
In VTFA
Header data
Sales doc type- zabc
Target billing tye- zmv
Copy requirement- 001 header/order related
Determination export data- blank
Assignment number- b
Reference number- b
Copy item number- tick box was selected
Item category
Copy requirements- Item/order related
Data vbrk/vbrp- 003 single invoice
Billing quantity A
Pos/neg +
Pricing type c
Pricing type exchange rate blank
Price source blank
Can any one guide what to doHi
In VTFA, please do the following changes,and then test by creating the sales orders then do collective billing.
Keep Assignment number blank
Keep Reference number blank
Copy item number- Uncheck the box where tick box was selected
Also make sure that PO Number in sales order is same
Regards
Srinath -
Can I create one single crystal report using 2 bex queries
HI all,
I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries and develope one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
Only problem is client is particular about one single report(either crystal or webi)
if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
Please let me know if I can link OLAp universes and go for 1 single webi report.
Any help is appreciated.
Thanks in advance,
MahathiYou can use either CR or WebI.
In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
Regards,
Stratos
PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query? -
How can spwan out parallel HBR in one single batch file?
We have several Hyperion business rules to be executed at night batch. To ease the control and management, we put all business rules under one single batch file. However how can we spawn out different business rules so that these rules can be executed in parallel?
We are using Windows Server 2003, Scheduled Tasks with Essbase ver 11.1
Thanks!CL wrote:
R1 and R2 can in parallel and but must finish before R3 and R4?
Can you START /WAIT a batch that then spawns two more START sessions without a /WAIT?
Do that twice and you will get rough parallelism.
Failing that, why not just use an OS scheduler? Have the first processes write completion logs. Time the second so that the first should be done, but put in a loop that looks for FILEEXIST.
Lots of ways to approach this. Scripting this stuff is always fun.
Regards,
Camerin LackpourThanks! Yes there are lots of ways to handle with batch scripts. Windows default Scheduled Tasks does not have dependency checking function and needs to write scripts to check something e.g. the log file. -
How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?
Hi,
Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one. Then your purchase will be billded to this new account. Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account). -
I want to play music from my playlist when I am using slideshow of my pictures in Ipad, but I can only choose ONE SINGLE song, and it continuously repeates itself. Is there a way to play the complete playlist while showing my pictures?
You can start the playlist playing in the iPod app and then switch into the Photos app and start your (non-music) slideshow - as you've found out you can currently only select a single track in the Photos app. Whether that will change in iOS 5 I don't know, but you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html
-
HT1660 how can I use one single library for all users on the same laptop?
how can I use one single library for all users on the same laptop?
You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library. -
How to save multiple tables on one single save button in JDeveloper.
hi all,
i have two tables on a JSF page.
the parent and child tables has 1 to many relationship.
its like for department id i have many employee_id's.
in my scenario ,
i have to give values to both parent and child tables at a time on one single click on add button. and after clicking on one single save button i should be able to commit the data into database for both the tables at a time.
its similar like a hire a person in fusion applications , when you clinked on hire person. all the related tables populated to give data and on one single save committing data to database.
please help in this. and its my urgent requirement for my application design.
am beginner to the J Developer Tool and ADF.
regards,
M vijayalakshmi.I assume you are using ADF BC as your business components. Now if both your Master and Chail VO are instances of the same AM, the commit operation of the AM will take care of it. You just have to drag and drop the commit operation as a Save button in your page
-
I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if -
How do I bind multiple PDF Documents into one single document?
I am trying to bind multiple PDF documents into one single document can anyone please help me?
You would need Adobe Acrobat to do that. Reader doesn't have the ability.
Maybe you are looking for
-
Splitting String and SubString in C#?
Hi, I have this string with names and their branches like this: Label/Sublabel/SubLabel2/SubLabel3. Where the string before "/" is a superlabel of its corresponding sublabel. --Label --------Sublabel (sub label of Label) -------------- SubLabel2 (
-
I cant get the little microphone symbol on keyboard of my i phone, was there before I changed the case
-
I am using a 8GB flash drive to store files. I use Windows 7 in virtualization to develop macros in EXCEL which are stored on the drive also. Up until two weeks ago I had no problems accessing files stored on the drive (EXCEL and other files). Now I
-
Hyperlink within a numbers document?
I'm trying to link two things on different sheets in numbers so that clicking on one brings up the other. For example clicking on 'Muffin Recipe' brings up the recipe from a separate sheet in the same document. I can't find out how to do this.
-
My Blackberry not being recognise and not turning-on
I was waiting for operator assistant to activate my T-mobile sim that accidentaly delete or call window. After that happen, I'm still hearing the computer generated voice call that I was waiting and release the battery to restart... unfortunately now