2 channels on IPod?

I just got a new Ipod 60GB and copied many Spanish language CD's to it (via I-Tunes). But I'm only able to hear one channel -- the Spanish side. The English translation is recorded on a separate channel and I can't hear that. Any suggestions?
Thanks.

Boy, am I dumb. I had this brand-new IPod and I was only hearing one side because I hadn't plugged the headphones in completely!
Sorry to bother you.
Gaylin

Similar Messages

  • How to restore stereo channel on ipod classic?

    how do I restore stereo channel on ipod classic?

    The iPod is only playing out of one channel (hence one earbud)? I assume you have tried another set of headphones to make sure that your current set is not damaged or faulty?
    You can also work through the remaining five 5 R's of troubleshooting to rule out the possibility of a software error/glitch.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's headphone jack, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damaged part for a little less.  Google "iPod headphone jack repair" and you should get a number of results to work with.
    B-rock

  • 4S problem connecting to car aux input

    Hi there,
    When I connect 4S to car aux with 3.5mm I get a really had hissing/feedback sound. Had no problem with any of the other iphones. I have tried my mates 4S and had same problem so it is not my phone. I have tried alter EQ and soundlevels but made no differnece. Any suggestions?
    Thanks
    Owen

    Hi I have the same problem.
    I think what we want to do is simple but sometime tricky.
    First you have to check your 3.5mm male to 3.5mm male audio extension cable is STEREO type. Not MONO Type.
    STEREO Type will transfer the Left Channel of Ipod sound to left channel of your car stereo, Same as right channel.
    The pulling of jack half way might make the left channel connect with both right and left of the other jack. The sound look ok but you are not getting stereo sound but mono sound.
    There are many possible combination as you did not mentioned your pulling jack of half way is at the Ipod side or Car Stereo side.
    My problem is I got sound like very distant away and soft and floating. But by turning the jack at Ipod clockwise or anticlockwise will make the sound normal (Not pull half way).
    I suspect the female jack in my Ipod is loose due to frequent insert and remove of the male jack or headphone jack.
    Can someone into audio help us on this ?

  • My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

    I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
    ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar  or contact an apple specialist through phone because of my work schedule and work load.  I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

    I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
    Phil

  • I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

    A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

    Find the documentation for your router and look up "Reset to Factory Defaults."  This process will put the router back to the way it was when you bought it.

  • The headphone jack on my iPod Touch Gen 2 is intermittent. I get sound sometimes out of one channel and sometimes both depending on how I hold the headphone jack.  Is this a costly repair?

    The headphone jack on my iPod Touch is intermittent.  I gat sound out of one channel or both depending on how I hold the jack.   It is making intermittent contact.  Is this a costly repair by Apple?   Can I do this repair myself?
    Thanks

    Here is a third-pary place. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    Here are instructions for doing it yourself
    iPod Touch Repair - iFixit

  • I buy the apple ipod from Channel Island Jersey UK and is dont find in the list of country to register for apple store. What i can do?

    i buy the apple ipod from Channel Island Jersey UK and is dont find in the list of country to register for apple store and i chose UK but my address biling for bank is in Jersey Uk. What i can do? wen i put the post code from jersey is tell that" Your post code does not mactch the country you selected for the Itunes store"

    I also just bought macbook pro completely legally and officialy.
    You can't officially buy an Apple product as far as Apple is concerned, in the Ukraine if Apple says that there are no Apple Authorized venders in the Ukraine.
    Here (in Ukraine) are official Apple's service centers, as like as in Belarus and Russia.
    According to Apple there are no Apple Authorized Serve Providers in the Ukraine.
    http://support.apple.com/kb/HT1434
    And why should I care about those kinda "support lists"?
    Because those lists are the official Apple statement of the state of affairs in your country. If you country is not on the list then Apple has no legal or official obligation to you or any products that you have managed to buy in the Ukraine.
    this is, for example, official distributor of Apple products in Ukraine.
    Not as far as Apple's statement on the issue is concerned.
    I bought legal macbook and have right for legal support, and that's all.
    Yes, if you get the product to a country with officially and legally Apple Authorized Service providers. There are none in the Ukraine.

  • 30 GB iPod Classic, Left channel is dead

    The left channel of my 30 GB iPod Classic has fizzled. It appears to be a hardware issue. At rare moments -- if I jiggle the wire connecting the iPod to my car stereo -- it may come alive again for a song or two. But most of the time, it's out.
    Has anyone had this problem? Can it be fixed? Or does the repair cost so much that it's cheaper to buy a new one? My Apple Care Protection Plan does not cover the iPod, only my iMac Core Duo.
    Charles

    do a reset.. PUSH AND HOLD the middle button and the menu button AT THE SAME TIME for 10 seconds.. this may take a few trys and it works best if hooked to power..

  • My iPod only outputs right channel sound...

    This issue has been plaguing me for a while now, but my iPod's finally had it and is absolutely not outputting sound out of one channel. The left channel in this case. Previous fixes mainly were to press on the iPod in various places, looking for that sweet spot. Once this spot was found, sound would start playing out of the left channel again.
    This solution no longer works.
    So, what do I do now? My Warranty's long expired, so...
    Message was edited by: DEC42

    have you trouble-shot the problem using different sets of headphones to make sure it really is your ipod that's broken, and not just the headphones? if so, iresq is the way to go.

  • I have a MC086LL Ipod Touch and haven't got a clue what is what on it and how do i get the updates to the YOuTube channels and more??

    I have the MC086LL S.N.1F******75J, I haven't any clue how to set up any updates and to get the YOUTUBE channel's or anything else at that matter on it?? What do i do ?? Please Help if anyone can??
    <Personal Information Edited by Host>

    A 3rd gen iPod touch can run up to iOS 5.1.1.  If the apps you need require a later version of iOS, you will need a newer iPod touch.
    The 4th gen model, which is still available on Apple Store's refurb ("Special Deals") page can run up to iOS 6.1.3.  The current 5th gen model can run the current iOS 7.x.

  • I can't hear one of the channels on my ipod--what should I do?

    One of the channels on my iPod isn't working. I can hear it when I wiggle the headphone jack in the input, but it doesn't last. I have AppleCare. Should I take it into my local Apple store? Devin
    dell   Windows XP  

    Well, it may be your actual set of headphones/ear buds that are the issue here. Have you tried another pair of good headphones to see if the issue is resolved when you try them?
    If you know that it's the iPod itself, then yes, I would suggest taking your iPod into your local Apple store if the iPod is still under warranty.
    -Kylene

  • I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    bassvid wrote:
    Thanks...now I need to do something about the iPod.
    I'm not sure which version iPod you have, but I just checked my iPod nano (current generation) and it also has a Mono Audio setting in Settings>General>Accessibility.

  • I have the old skool Monster car cable--i tune in the channel on the Monster cable and my old iPod plays. I bought the adapter for Lightning to accommodate the new iPod i just bought. But it won't play. ***?

    I have the old skool Monster car cable--i tune in the channel on the Monster cable and my old iPod plays. I bought the adapter for Lightning to accommodate the new iPod i just bought. But it won't play. ***?

    It could just be a compatibility issue.  Have you tried resetting the Nano with everything connected to see if that makes a difference?
    To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • IPod touch 4G with interferance on 1 channel when connected in my car

    I have an iPod touch 4G with interferance on 1 channel when connected to my VW Golf (2009) using VW cables and a RNS510 stereo system. I can only listen to it if the balance is full left channel! Tried it in another car and it is fine. Tried my sons 2G touch in my car and that is fine. VW say the stereo is fine? I used the same settings as the VW technician's iPod his was OK and mine wasn't. Any ideas how to fix this?
    Thanks

    Try turning off your iPod and turning it back on. It might Help.

  • My ipod nano has poor audio output on one channel

    I have an ipod nono Model PC694LL, version 1.2PC, and the audio on one of the headphone channels is weak, i have tried at least 3 different headset with the same results,  Am i just out of luck and the unit is faulty

    This functionality is not available on the iPod Classic and it's unlikely that it could ever be added in the future.  The iPod Classic line hasn't received any firmware or hardware upgrades over the past couple of years.
    A different solution would be to purchase a set up mono headphones.
    B-rock

Maybe you are looking for

  • Issue with extraction of data to Delta Queue

    Hi All, Background:- One LO Data source each from Application 8, 11 and 12 was active in LBWE. Update method was specified as Queued Delta. However this Data source was not utilized to pull any data to any of the Global BI Systems. These data sources

  • Cluster RESOURCE how can I get clusterowner (preferred Owner List) in readable mode from Powershell?

    Hello, I'm trying to list the Preferred Owner list of some cluster Resources, but we have many nodes and the output is not readable from powershell if I use the standard command but it shows somethink like {server1, server2,.....} Then I've tried to

  • How to create Criterian For more than one table

    Hi, I have one problem how to create criteria for more than one table in that using one criteria hot to get the values from database in that more than onetable for getting these values .Please send me the exampke code. reagrds, raghu

  • Jtable's tablecell editing problem

    there are some jcomponets in a jframe(jtable, jtextfield, jbutton, eg.), i edit in a tablecell in the jtable first, then i click another tablecell , when the first tablecell's value i just edited has committed; but when i click on jtextfield (another

  • ECATT - error in session start

    Hello! I have a problem with an eCATT procedure which is a part of a Best Practice for All-in-one installation. When I try to run the eCATT, I get the message "Error in session start. Possible causes: 1. Scripting deactivated. Contact administrator.