2 computors and a Imac as screen?

Hello
Can i connect a mac mini (With Linux installed and thunderbolt) and a PC (With Windows 7 and Displayport) to an imac (with thunderbolt and Lion) and use it as display? and how does target display mode work? which computor will be useing the display or how do you switch which computor will be incharge?

The exception is the new 27 iMac, which has a Mini DisplayPort capable of input or output, according to this article:
About.com: Using an iMac As an External Display: How to Use Target Display Mode

Similar Messages

Can I do screen share with my iPod touch 4th gen and my iMac?

Hi,
Is it possible for me to use screen sharing with my iPod touch 4th gen and my iMac?

You can control/use/view you Mac via the iPod. There are apps and program like GoToMyPC, TeamViewer.
Some do not do sound..
There is no way to control the iPod from a computer

Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

My screen sharing functionality did not show up in the dock with an updated icon. It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN. Once I tried to launch screen sharing nothing happens. Such an elegant solution in Mavericks not does not work. Ugh. Help!

This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber (omit the :port number if you are using the default VNC port, 5900). This should launch Screen Sharing and put its icon in the dock. You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
Hope this helps; worked for me.

Yosemite installed on iMac purchased with Mavericks now takes 2 minutes to boot and give the login screen.

Downloaded and installed os x yosemite on iMac that was purchased originally with Mavericks. When power button is pressed I get start up audio tone and then the the black screen with the white apple symbol with the progression bar. The bar moves very slowly two about one third and then the mouse cursor appears and there it stalls for around two minutes. After the wait the login screen appears and it operates normally. This whole process before update would only take maybe 30 seconds.
If I try the web recovery process it will revert back to Mavericks any suggestions on what this might be. I do have an external Mac passport pro external drive that does have time machine enabled and has been there for months.
Thanks

After spending a number of hours with Apple Care personnel I was connected with a supervisor and finally got the iMac to boot up on every attempt and in a reasonable amount of time. Login screen now comes on in 30 to 40 seconds and computer is usable within a total time of 1 minute to 1minute 30 seconds.
Here was the process. Tried to download whole operating system with reinstall from utilities menu at power on and at 7 hours progress bar stalled at one third the way. Reason, time machine external hard drive was still connected during process. Disconnected all external connections except power and tried download again. This time whole operating system downloaded in 15 to 20 minutes. Yosemite installed and rebooted automatically and booted to login screen, signed in then to desktop, but boot took around five minutes. Shutdown and connected all peripherals, i.e.. ext. HD, DVD, printers and tried to start. iMac stalled at 2 minutes into progression bar with white apple symbol before login screen. Removed peripherals and tried again and still stalled and would not boot.
What was done to correct is as follows. Started iMac in Safe Mode, cleared all items in cache from Macintosh HD/Library folder and System /Library folder, system start up items, launch agents, and launch daemons contents cleared, removed printers in system preferences, ran disk utilities verify and repair of disk and disk permissions. Shutdown and removed power from iMac. With no peripherals system then booted normally. Reconnected peripherals while iMac was still on and added printers back to system preferences and all is well.
So it seems only reasonable that the downloading problem was hindered by the time machine external hard drive, to which an Apple rep. agreed and the extremely slow boot up or stalled boot up was caused by items in the start up and launch folders. I will state here that I was using my ISP's anti virus software for the Mac which was in the launch folders and most likely was causing the boot up problems.

TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
If the screen comes on, basic graphics is working.
The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
What could be the problem depends on where in the process it stops, and whether the power light is blinking.

My iMac computer screen is blurred by black and white lines.

My iMac G5 screen is blurred by black and white horizontal lines and tiny rectangles. This occured after I woke it up from sleeping. Everything else seems to be working fine, but is impossible to see what I'm doing. Any ideas on how to fix this?

Fixed it! Rebooting the computer while holding down the command, option, P and R keys while letting the chime ring 4 or 5 times did the trick.

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David

Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H.

IMac 2011, screen freezes and fans start spinning

Hello,
I have this really wierd problem with my iMac i5 2011 edition since a month or so...
A lot of times when I am downloading or watching a movie or playing games under OSX on my iMac my screen slowly freezes, it always starts with my finder and then te rest goes, I get the marble of death and shortly after that the fans start spinning like crazy, they start slow but after a minute or so they make a lot of nice. Take in mind then I am unable to use my iMac in anyway, the mouse moves but it doesn't respond to clicks and also my keyboard doesn't respond, I keep getting the marble of death still.
The wierd thing is that sometimes it doesn't do this for 2/3 days and sometimes it does it like 3/4 in an hour (have to restart manually). Also, this is very interesting, I have a version of Windows 7 installed on my iMac wich I use mainly for gaming and under windows it NEVER freezes in any kind, even when I game like 5/6 hours long straight.
Therefor I thought it must be a software problem so I did a complete system reboot 2 days ago but that didn't help, already froze 3 times since...
Can anyone help me? I still have 2 months of applecare but I have a LAN party soon so I am not to anxious to go 3 weeks without my iMac, maybe there is a simple solution that I am missing...

Some things you can try:
1. Try a new user account, create one in System Preferences -> Users and Groups, test to see if the issue still persists in this new user account, this will give us a lot of information. (if the problem is the same or it vanishes, let us know)
2. Make sure all your software is up-to-date, Apple Logo -> Software update.
3. Unplug all 3rd party devices, just keep in the necessary, Power, Keyboard + Mouse, no ethernet or external hard drives etc.
4. Reset the PRAM http://support.apple.com/kb/PH4405
5. Reset the SMC http://support.apple.com/kb/HT3964
6. Boot to the recovery partition (CMD + R on startup until you see a spinning cog with an apple logo, then let go) -> Choose english as the main language -> Choose Disk Utility -> Select your hard drive from the left pane of Disk Utility (NOT Macintosh HD, the one that will look similar to: 1TB ST3200WAJS) -> Select the 'First Aid' tab -> Bottom right of the window it will say 'S.M.A.R.T Status: ________' ... What does it say after smart status?
7. While still inside the Recovery Partition, select Macintosh HD -> First Aid (tab) -> Verify Disk -> Repair Disk (unless it says the volume Macintosh HD appears to be OK) -> Verify Disk Permissions -> Repair Disk Permissions (if there are differing permissions on the disk)
Let us know if the issue still persists, but make sure you do all of those steps correctly and post back as much information as possible (PRAM takes two chimes at startup, unplug the power cable for 15 seconds, plug it back in, wait 5 seconds, turn on... make sure you follow all articles)
Good Luck!
MiiCK

Why does my Imac screen slide and I lose my screen? It goes back to my desktop. Then sometimes my screen goes to full screen and I don't know how to get out of it.

Why does my Imac screen slide and I lose my screen ~ It goes back to my desktop.
Then sometimes my screen goes to full screen without me doing any commands, and I don't know how to get out of it without going to force quit and starting all over.

Hi,
When it goes full screen try moving the mouse up to top right of scren & see if there a double diagonal Arrow to click on.
On the other see if it's the silly implentation of Spaces/Mission Control/Expose in ML...
https://discussions.apple.com/thread/4298411?start=0&tstart=0

IMac G5 screen goes black and fan gets loud...?

This has never happened before...
Randomly tonight while on my iMac the screen shut off. The computer was still running, but my screen was completely black like it was off, and the fan got really loud. I turned it off then back on each time it happened (3 times), and it would turn back on like nothings wrong but then after probably 30min. of using it... it would happen again.
Any idea what it could be? This had never happened before, and I couldn't find a whole lot on google.

"my problem might have to do with overheat and/or I might need to "vacuum" part of my mac. No idea how to do this and I'd like instructions on how."
Since the iSight cannot be taken apart unless you take it to an AASP, the only thing you can do is use a vacuum hose specifically one w/a brush on the end so as not to scuff up the plastic. Just run the hose over all the computer vents.
Make sure your computer is OFF when doing the above.
Also, when troubleshooting, disconnect all devices from your computer except for the keyboard & mouse.
Move the computer to a less dusty place and/or move it where the computer can get plenty of ventilation.
You mentioned that you read rockstar's post. Therefore, please advise all the troubleshooting suggestions that you have already tried. This will eliminate all the +"been there, done that"+ scenarios. Thank you.

My 27" iMac has just creen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB keyboard

My 27" iMac has just come back from the workshop after having a white screen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB ke

Thanks for your reply! I must apologise for the quality of my post. I inadvertently posted it before it was corrected.
I am very disappointed with this iMac. It is only 18 months old and this will be the third visit to the workshop. I had expected more from Apple and from their repair agents. Luckily I have AppleCare.

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367

2 computors and a Imac as screen?

Similar Messages

Maybe you are looking for