2 Copies of WGM running connect to same LDAPv3

When running a second copy of WGM from our mail server 10.4.7 and
authenticated to our LDAPv3 service running on our file-Server:
I noticed i can add users in the accounts pane - and save, however when
I bring up WGM from the file-server where I host the only LDAPv3 service;
the new users do not show up.
I had to shutdown both running WGM clients , then start WGM again for them
to show up...
Question is: Doesn't WGM maintain locks, or sycronizing flags or any other
method to understand 2 copies are active??
Extemely poor coding if this is the case...for a critical admin tool.

Forgot to mention, I disabled all video download add ons before I posed question. Thereby hopefully eliminating those as possible areas

Similar Messages

I have two exact copies of mail running in my dock?

I don't know hot it happened, but I have two copies of Mail running at the same time. Both are in my dock. When I try to remove one from the dock, it reappears right after. One gets notification a few moments after the other. How is this possible and how do I get rid of the clone????

''Matt [[#answer-710398|said]]''
<blockquote>
What anti virus are you using?
</blockquote>
I'm using '''Windows Defender''', with a security focused IMAP hosting/Spam/malware filtering service. Open to unofficial suggestions on desktop malware front (use MalwareBytes MBAM free on occasion) and Secunia PSI.
TIA,
Michael

Can you have two copies of Encore CS6 running on the same computer?

I'd love to be able to have two copies of Encore on the same computer. While one copy is encoding and burning, I'd love to get another project started and encoding on the same computer and maybe, if possible, even start burning to a separate external burner. But first, I'd love to just be able to have two copies of Encore open on the same computer. I tried copying the Encore CS6 folder to a different drive and then running it but it says there's another Encore in session and this may cause issues with the hardware.
Windows 8.1 Pro
X99 5930k 6-core
32 GB Ram
GTX 970 4GB GPU
Thanks!

I can't imagine Encore being able to run 2 instances.
Build from Encore to an image (iso), and get ImgBurn. You can run multiple instances of ImgBurn and burn as many DVD/BDs as you have burners (including externals via USB or whatever). Send him a donation; his product is fantastic.
http://www.imgburn.com/
John Smith re avoiding unwanted addons in the download/install:
http://forums.adobe.com/thread/1322583

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

ERROR MASSAGE- "The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again".

"The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again"this kind of error massage i found but there are no other copies of Firefox running on my computer.So please solve my prob.I can not uninstall this because i have saved important bookmark on my system.When i start my Firefox that time browser is opening few times later may be it's my internet slow connection but everyone has slow connection internet they are not having this prob then why should i have this prob.Why it is taking little bit time to open?after that update prob when i installed the update file.

Firefox [[Safe mode]] is a diagnostic mode that allows troubleshooting.<br />
You start the same version, only some features are disable like add-ons (Tools > Add-ons > Extensions).
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\updates
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

Problem with uc-locale-en_GB-8.6.2.1-12.cop selection on unity connection cluster

Hi All,
Hopefully someone can help me out. I'm trying to install uc-locale-en_GB-8.6.2.1-12.cop on our unity connection cluster which is running 8.6.2.20000-2. The cop files successfully installs and I've rebooted the both servers but I cannot select the language anywhere in unity connection administration.
I suspect this is because I'm running 8.6(2a) from the cisco site and not Unity Connection 8.6(2) Engineering Special 12 as per the release notes for Unity Connection 8.6(2a). Are Cisco likely to release language packs for version 8.6(2a)? Otherwise I guess I'm going to have to try and raise a TAC call and get access to the engineering special so I can gain the british langauge back again.
For reference :-
admin:show version active
Active Master Version: 8.6.2.20000-2
Active Version Installed Software Options:
uc-locale-en_GB-8.6.2.1-12.cop
ciscocm.refresh_upgrade_v1.1.cop
cm-locale-en_GB-8.6.2.1000-1.cop
Thanks,
Mike

Hi Mike,
I'm not sure about the versioning, but am curious if you followed these steps;
To Install Connection 8.x Language Files from a Disc
Step 1 Stop the Connection Conversation Manager and Connection Mixer services:
a. Start Cisco Unity Connection Serviceability.
b. From the Tools menu, select Service Management.
c. Under Critical Services, in the Connection Conversation Manager row, select Stop.
d. Wait for the service to stop.
e. Also under Critical Services, in the Connection Mixer row, select Stop.
f. Wait for the service to stop.
Step 2 Insert the Languages disc in the disc drive.
Step 3 Sign in to Cisco Unified Operating System Administration.
Step 4 From the Software Upgrades menu, select Install/Upgrade. The Software Installation/Upgrade window appears.
Step 5 In the Source list, select DVD/CD.
Step 6 In the Directory field, enter the path to the folder that contains the language file on the CD or DVD.
If the language file is in the root folder or if you created an ISO image DVD, enter a slash (/) in the Directory field.
Step 7 To continue the language installation process, select Next.
Step 8 Select the language that you want to install, and select Next.
Step 9 Monitor the progress of the download.
Step 10 If you want to install another language: Select Install Another, and repeat Step 4 through Step 9.
If you are finished installing languages: Restart services:
a. Start Cisco Unity Connection Serviceability.
b. From the Tools menu, select Service Management.
c. Under Critical Services, in the Connection Conversation Manager row, select Start.
d. Wait for the service to start.
e. Also under Critical Services, in the Connection Mixer row, select Start.
f. Wait for the service to start.
g. If you installed Japanese: Run the CLI command utils service restart Cisco Tomcat to restart the Tomcat service.
Note Make sure that the multilingual .cop files are installed on the exact specific CUC build that they were created for. Applying incorrect .cop files for your specific version results in an unexpected behavior of the user conversations.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug027.html#wp1054157
Cheers!
Rob

How many threads can be running at the same time

Hi!!
Dows anyone knows how many Threads can be running at the same time in the JVM.
I'm making a multi thread client-server app and I would like to know how much simultneous connections the JVM support. I'm using one Thread per connection.

Hi, thanks to all for your answers.
I think that I made the wrong question, as you said: "that means the number of threads currently created".
I'm worry about this because my application is already online (It's a mail server -SMTP and POP3 server using ORACLE for the users database- ) and some other user post in the "multi-tread forum" that almost any JVM can only have 700 threads created at the same time, and I've never heard or read anything about this.
what you mean with the stack space (memory??)
I'm using the JavaWebServer 2.0 and a servlet to start the main Thread.
Again Thanks to all for the answers but I think that the schapel answer is the one that solve my doubt...

How to set Different applications running on the same computer to use different Gateways?

Dear All,
I would like to have different applications running on the same computer to use different Gateways (both gateways are in the same subnet).
Is it possible in Windows7 with / without a third-party utility?
Current scenario & requirements:
I have two internet connections. Both are in the same subnet (192.168.1.0/24) and connected to the same LAN switch
Gateway for the first connection is 192.168.1.1
Gateway for the second connection is 192.168.1.2
I need to set my chrome browser & google talk to use the gateway 192.168.1.1
I need to set my IE & skype to use the gateway 192.168.1.2
Is it possible? Answers are appreciated!!
Regards,
Anees

Hi,
I agree with Bill. Gateway is essentially an IP address for one network to other networks. For example, you have two networks: network A and network B, to make the two networks communicate with each other, you must go through Gateway. That is, as long
as you set Gateway, then you can make the two networks communicate with each other. The ip address for Gateway is the ip of device with routing enabled. One host machine can own multiple gateways.
Andy Altmann
TechNet Community Support

Multiple Libraries for Video running at the same time on one PC

Hi Everyone -
I want to clarify this is for VIDEO files, not music for my 6 ATV's on the network.
Problem: I have well over 1000 VIDEOS in my iTunes Library, and I am wanting to have multiple libraries availible at the same time; not just whichever the computer has open.
We have several atv's on the network and I would like to take my video organization one step further; instead of scrolling forever in the atv menus for the video you want; I could make several libraries all availible at the same time.
Such as:
Kids Library
Workout Library
Parents Library
etc
This in turn would shrink the primary library and have less videos to sort by. I know how to create the Libraries, I just dont know how to have them all running at the same time.
Infastructure:
Windows 7 Ultimate with Drobo B800FS (16TB of storage) all connected to Cisco 3660 Gig switch with multiple atv's hardwired back.

iTunes can only open one library at a time. If you have multiple computers, or virtual machines, each could be serving a different library.
tt2

How to print from different wireless connection on same network

I can print wirelessly when I am in range of the wifi to which my computer and attached printer connect. However, when I go to a different wifi connection within the same network, I cannot print. How can I my wifi connections on same network talk to each other so that I can print from second wifi site on same network?

The problem is you loaded the printer directly and now do not have it plugged in.. so delete the printer in the control panel.. then setup the printer again.. this time connect to it as network printer. The bonjour should make it available as a network resource..
Tell me if you still run into trouble doing that. You may need to load the IP of the TC manually..
Window7 has higher security level than xp.. and that can sometimes also cause issues.
Are you using SMB compliant names for the TC, wireless and printer??
Can the windows 7 computer get internet via the TC? Can you ping it?
Look up how to reduce the security level in windows to match xp.. I don't remember the details but you have to do some nifty footwork.

Java threads. Are they running at the same time?

Hello everybody. I am implementing a multiagent system in java and at some point in the program i need a specific function (from a specific class) to run at the same time in several "copies". Those functions are communicating with each other with some messages, so as you can understand not running at the same time is a big problem because of this messages.
Below i am giving you an example of the code i am using. I would like your opinion whether those functions are running parallel or serial. If they are not running parallel what should i do? Any opinion or something that can help me would be perfect. Thanks in advance.
//my class
public class Agent extends Thread {
                       public void MinConflicts(Agent array[],int max_moves){//code in here}
public static void main(String[] args) throws IOException {
              Agent[] fbi = new Agent[num] //num is inserted by the user
             //code here
             for(i=0;i<num;i++){
                     fbi.start(); //starting the treads
for(i=0;i<num;i++){
fbi[i].MinConflicts(fbi,max_moves); //running the function that i want to run parallel
//code here also :)

What you appear to be doing here is creating an array of Thread references (which I hope at some point gets populated with actual Thread object references!)......because your first loop is wanting to cycle through each array slot starting the referenced Thread. Then the next loop iterates through the array again, this time calling the method for each Thread object.
Assuming that you do populate the array, what this code will do is start each Thread which, I believe, will start and immediately terminate because run() has not been over-ridden. The second loop winds up calling the method for each Thread in the array. You are actually calling it from the main thread though. So, as previously advised, I think that you will run each method sequentially.
The direction that I would head with this is to override run() in your agent Thread and have that run() method call the MiniConflicts() method. Then, in your main routine you can do away with the second for loop. The looping start will start all of the individual threads and they will execute the run() method......which in essence will be executing your MiniConflicts method.
This reply is NOT a total design... I am sure that there are holes to be filled... but I think that will get you headed in the right direction.

Okay to have Ethernet and Wi-Fi running at the same time ?

Hi,
I've always been careful to turn off Airport before I switch to Ethernet.
I was just wondering if it is okay to have both options running at the same ime and what consequences it may have.
Thank you for reading this

Coitus Interruptus wrote:
+"Will the Mac use part of both simultaneously?"+the Internet and E-Mail.
Hi,
every IP based connection has a gateway that tells a device where to send packages that belong to the subnet the connection is in.
Then there is a (one, and only one!) default gateway that tells the device where to send all packages that belong to no subnet of any connection. On OSX this is normally bound to the primary network device (the one that is on first place in the network configuration).
So there is no problem having more than one network connection open. In your case, though, the WiFi connection would probably be in the same subnet as the wired connection. This doesn't pose a problem per se, but just is a bit senseless. It doesn't have an impact on networking, though.
My sister suggested it. She knows Latin. It means "handsome boy", doesn't it ?
In what reality?
C.

Terminating ssl on a bigip, disco and oid running on the same machine

hi,
please could someone point me in the right direction.
I have a working discoverer server 10.1.2 running on a host on 7777
I have a working 10.1.2 SSO and OIM 10.1.2 server running on the same host on port 7779
Everything works fine with OID authentication being forwarded to AD servers.
I'd like to put a bigip in front of the SSO server and terminate the SSL on the bigip, because this seemed to be simplest.......
The bigip docs say delete the SSO Server from the partner apps (this isn't possible from the SSO web interface, I can only view it).
I need to get discoverer to connect to the https://[bigip] for SSO authentication.
I know I need to use ssoreg.sh to do this, the combination of commands eg which homes to use I am having difficulty getting right.
Thanks in advance,
Robbo

And also, how I can interchange message between independent applications (or services) on the same computer?The same way you would interchange messages between them if they were running on different computers.
You already seem to understand the concept of clients and servers passing messages between each other. There is nothing to prevent a "server" from being a client of another server. And there is nothing to prevent a client from running on the same computer as a server.

ERROR MASSAGE-"The update could not be installed.Plase make sure there are no other copies of firefox running on your computer,and then restart firefox to try again".

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/870411]]</blockquote>
"The update could not be installed.Please make sure there are no other copies of Firefox running on your computer,and then restart Firefox to try again"this kind of error massage i found but there are no other copies of Firefox running on my computer.So please solve my prob.I can not uninstall this because i have saved important bookmark on my system.When i start my Firefox that time browser is opening few times later may be it's my internet slow connection but everyone has slow connection internet they are not having this prob then why should i have this prob.Why it is taking little bit time to open?

Thanks for the info about Trojan. It may be the problem. Meanwhile I went to Admin/Owner side and did some cleaning -- including trying to reload my Favorite/Bookmarks that have always carried forth from previous levels of Windows XP and earlier.
The new computer here did not grab the Bookmarks from the previous, and yesterday I thought I had them loaded, and today went to Worker-Bee side and they are not showing.
About those add-ons... I have no idea, but think I got everything up to date yesterday. I will look at your earlier reply tomorrow or this weekend when I have more time at home to learn from it.
Thank you for your time in helping.
Late here, heading to sleep. Marilyn

Two Telnet read VI's running at the same time interfere with each other

I have a situation where multiple tests must test multiple UUT’s on the same computer. To send commands to and get responses from the UUT's I use a telnet session. The telnet read VI uses a semaphore. Therefore when two separate top level VI's are running, each calling the Telnet read VI, if one Top Level VI is using the Telnet Read VI the other Top Level VI waits for the first one to complete before it can use the Telnet Read VI. This VI is setup for reentrant execution but because of the semaphore it cannot truly be used as a reentrant function. This causes severe problems when trying to communicate with two different telnet sessions simultaneously.
In the past I have avoided this problem by compiling everything into an executable. Then each Top Level program runs completely independently with no interdependences. However, now I am implementing Teststand and I need to call the same Top Level VI's. I need to be able to get information into them and back out of them from Teststand. This means that I can no longer compile them into stand alone executables. I did compile each top level VI into its own Share DLL thinking that then each top level program would have its own library to call upon. This did not work. Even though both top level programs are compiled into their own DLL there is still interdependency when calling the telnet read VI. One program waits for the other to finish reading from its telnet connection before it can read from its own telnet connection. Since I have to continuously read from the telnet connection, sometimes for up to half and hour, the tests do not function simultaneously. How can I get around this? Is there a solution?
Josh
PS The Telnet Read VI I am refering to came with the Internet Toolset package. Attached is a copy of the VI I use to communicat with the UUT's.
Attachments:
GUI_Telnet_W-R_Auto.vi ‏64 KB

Sorry about the confusion.
The file I attached is in the hierarchy of two separate top-level VI's. The telnet connect is opened once and closed once in each top-level program. The ref number is then passed into and out of the VI that I attached. I use this VI to repeatedly send commands via telnet and wait for the appropriate responses. The telnet read VI is given a read line separator and reads from the telnet connection until it matches the read line separator with a text string read back from the telnet connection. If not match is found it times out and creates an error.
I am not sure how to provide an example of the overall scheme since the problem occurs when both top level VI's are compiled each into their own shared DLLs. Those DLLs are then call from Teststand and at some points they are both running at the same time on the same computer connected to two different UUT's.
The question I have is why does one DLL share functions with the other? When one DLL is using the telnet read VI the other DLL waits for the first one to finish with it before it can it use the telnet read VI. If they were both compiled separately each into their own DLL shouldn't they each have their own set of functions to call upon instead of having to share? I know that if the two top-level VI's are not compiled they cannot both execute the same sub-VI at the same time. The only way to get around this is to set the execution property on the sub-VI to reentrant.
I actually fixed the problem by setting the VI I attached and the Telnet Buffered Read.VI (called by Telnet Read.vi) execution properties to reentrant. However, I am still concerned about two separate DLLs sharing sub-VIs. Why does it do this?
Joshua

2 Copies of WGM running connect to same LDAPv3

Similar Messages

Maybe you are looking for