2 counterparties in 1 securities' transaction

Dear Experts,
I would like to ask if its possible through TRM to create a security transaction using TS01 and to select 2 counterpatries. The deal that we want two create is done by two brokers.
Does anyone kwons how to handle with this situation in TRM?
Thank you in advance,
G.P.

Hi,
in Treasury you can have only 1 counterparty per transaction; regarding commissions you could have more than 1 commission-flow (payed differently - e.g. 2 flows => each payed to a different broker)
Regards,
Lorenz

Similar Messages

  • Settled Securities Transaction not appearance in TBB1

    Hi expert,
    I have a Securities transaction to sale stocks. I created Transaction in TS01. And I already settled in T-code TS04, but it's not appearance in T-code TBB1.
    anyone can help for this situation please?
    Already settled
    but it's not appearance in TBB1

    Hi Jyothi
    Possible reason is that in your AUC asset, you just have Areas 01 and 20.. You dont have other dep areas
    If yes, then solution approach would be
    a. For Future cases - Ensure that AUC Asset class has all these dep areas allowed
    b. For the present case, either you reverse all postings, create a fresh AUC asset after allowing
    dep areas OR
    Create a new Trans type (Copy of 100) and restrict it to Dep Areas 25, 35 and 75.. Post the values in tehse dep areas from ABSO
    Br, Ajay M

  • [FSCM] partner assignment in transaction TS01

    Hi, everyone
    There is a tab 'Partner Assignment' to add another business partner related to a securities transaction in transaction TS01. But I cannot choose any business partner. I created brokers, issuers, depository bank, and counterparties in BP. And I assigned additional business partner role categories to TRG001 (financial transaction) work area and 200 (securities) application category. Here is the menu path in SPRO.
    FSCM -> Treasury and Risk Management -> Basic Functions -> SAP Business Partner for Financial Services -> Settings for Financial Services -> Communication -> Settings for Partner-Object Relationship -> Assign Additional Business Partner Role Categories to Object
    TR0150: Issuer
    TR0152: Depository Bank
    TR0801: Broker
    But I cannot add any business partner to the partner list of 'Partner Assignment'.
    Thanks.

    Hi Minsun,
    Can you help me on the issue you faced earlier for assignment of partner in TS01. I am also facing the same problem.
    Please guide me for solving the issue since you already went through this.
    Regards
    Prasad AV

  • I'm not buying Lion because it won't run Quicken

    This is one of those frustrating OS conversion problems.
    Quicken 2007 won't run on OS X Lion.  Intuit does not seem to have anything in the works to make Quicken work in the new OS.
    The dilemma is that Mac users EVENTUALLY will have to convert to Lion and its successors because other mission-critical apps we use will eventually not run in OS X 10.6.x.  For Quicken users, the options seem to be :
    1. Stay on OS X 10.6.x forever, but note the caution above about this not being a reasonable long-term solution.
    2. Convert to Quicken Essentials.  This won't work for me because Essentials is missing features of Quicken I consider "essential", e.g., handling securities transactions and portfolios.
    3. Convert to one of Quicken's competitors such as iBank.  I am testing iBank now.  It successfully imported my large Quicken data file which I had exported as a  .qif file from Quicken.  I'm now auditing the results and they are more reasonable than I had expected.  For example, the securities positions can be reconciled back to Quicken.  There are issues I have not yet figured out.  Such as how to capture years of bank reconciliation data for checking accounts.
    But converting all the years of data and checking it all is going to take a lot of time.
    Anyone have anymore info on this issue?
    Thanks,
    Rich

    You need to have a valid billing details even if you are downlaoding free app.  go to sttings/itunes & app store , tap on the ID htere and lig in and check your account billing details.  The message you go twas to contact Apple.  APple is not here only users in this user forum.
    Contact Apple
    ITUNES SUPPORT BILLINGS etc
    http://www.apple.com/emea/support/itunes/contact.html
    or   https://expresslane.apple.com/Issues.action

  • Sap treasury - 01A shares

    Hi,
    If i want to configure additional product type relevant to 01A.  What are the configuration steps
    I think
    Product Type creation  and assigned to the Company code are required. In addition to the any steps, please suggest me
    with regards
    raju

    Dear Raju,
    You  have do complete below set of customization in case you created new product type in system.
    Treasury and Risk Management- Transaction Manager- Securities- Transaction Management
    Define Transaction Types
    Define Flow Types(use standard one)
    Assign Flow Types to Transaction Type
    Assign Flow Types to Update Types
    Assign General Valuation Class
    In Accounting
    Account Assignment References
    Position Management procedure & position indicator generation
    Account Determination - Update type assign to posting specs assigned to account symbols which are assigned to G/L accounts and can be differentiated with Account assignment references.
    Hope this answer your query.
    Regards,
    Jain

  • Buy stocks on OTC Market

    Hi people,
    we are implementing Transaction Management in Treasury. My client's requirement on following:
    They have  agreement when they buy stocks on OTC market.
    Step 1:  I make collateral to vendor
    Dr: Collateral
    Cr: Cash or Bank clearing account
    Step 2: I down payment to vendor
    Dr: Down payment
    Cr: Cash or Bank clearing account
    Step 3: I receive stocks and payment to vendor
    Dr: Stocks
    Cr: Down payment
    Cr: Cash or Bank clearing account
    Please help me this case.
    Thank you
    Ms. Minh

    Hi,
    Use securities module (within treasury management); product type 01A; transaction type 100. You can add flow types  for collateral, down payment and assign those to transaction type. Accounting entries can be controlled by account determination settings.
    Use business partner (tcode: BP; role: counterparty) instead of vendor.
    Use condition type (111 by default) for dividend. Would you have multiple purchases of the same stock? Then, you will need to be aware of the position (external position) concept; so you can post dividend for your position as opposed to for separate purchases.
    Create asset securities account TRS_SEC_ACC.
    Once config is done, FWZZ to create class (stock master data, if you will); FTR_CREATE or TS01 to create securities transaction; settle; post using TBB1 for collateral, down payment etc., FWZE or FWSO to post dividend.
    Manish

  • Changes in TR from 4.7 to ECC 6.0

    Hi All,
    Our client have just upgraded from 4.7 to ECC 6.0 and when processing securities, according to them they didn't need to go through TBB1 before doing TPM10 back in 4.7. In summary this is their process:
    4.7 (OLD) --> FWZZ (Create contract master data) --> TS01 (create transaction) --> TS04 (settle transaction) --> TPM10 (post transaction) --> TPM18 (fix amortization).
    When they tried doing the above steps in ECC 6.0, they can not proceed with TPM10 because the system can not find the specific transactions.  I've researched about it and I've read in SAP HELP that you would have to do TBB1 first before doing TPM10. Is this a documented/recognized change for the Treasury module when upgrading from 4.7 to ECC 6.0? Is there any SAP note or document that could enumerate normal changes for the Treasury module and could explain the reason for such change? Please assist us on this as I am not so familiar with the Treasury processes. Thank you!

    Hi,
    Correct process flow is:
    1. FTR_CREATE (TS01) -> Create securities transaction
    2. FTR_EDIT (TS04) -> Settle transaction
    3. TBB1 -> Post transaction to FI
    In case, you need to reverse the above transaction which is already posting to FI, then follow the following steps:
    4. FTR_EDIT (TS07) -> Reverse Settlement for the transaction
    5. TPM10 -> Reverse accounting entries posted to FI in step 3.
    5. FTR_EDIT (TS07) -> Reverse Contract completely.
    Now if you accounting entries are incorrect in step 3 or 5 above, then you would need to look at account determination. You may just need to set your GL accounts right in the account determination.
    Update type SE1000 posts purchase transactions. Check the posting specification assigned to it -> debit & credit account symbols within posting specification and -> the GL a/cs assigned to these symbols along with combination of valuation area & AAR.
    Thanks and regards,
    Abhinav Sethi

  • Any changes in mmap from 2.7 to 2.8 ?

    Hi
    Are there any changes in mmap from Solaris 2.7 to 2.8 ?
    I am getting core dumps in 2.8 for a program using mmap,
    where as same program runs fine in 2.7.
    I am doing 'mmap' in a library and using that address inside
    a program. mmap is done with MAP_PRIVATE|MAP_NORESERVE with proper protection
    PROT_READ|PROT_WRITE ... The problem is even if I am not
    touching the mmapped address I am getting a core dump in
    sleep(2) system call. Before flushing this with my code, I just wanted to know are there any differences gone in from 2.7 to 2.8 ??
    Thanks
    sini

    Hi,
    Correct process flow is:
    1. FTR_CREATE (TS01) -> Create securities transaction
    2. FTR_EDIT (TS04) -> Settle transaction
    3. TBB1 -> Post transaction to FI
    In case, you need to reverse the above transaction which is already posting to FI, then follow the following steps:
    4. FTR_EDIT (TS07) -> Reverse Settlement for the transaction
    5. TPM10 -> Reverse accounting entries posted to FI in step 3.
    5. FTR_EDIT (TS07) -> Reverse Contract completely.
    Now if you accounting entries are incorrect in step 3 or 5 above, then you would need to look at account determination. You may just need to set your GL accounts right in the account determination.
    Update type SE1000 posts purchase transactions. Check the posting specification assigned to it -> debit & credit account symbols within posting specification and -> the GL a/cs assigned to these symbols along with combination of valuation area & AAR.
    Thanks and regards,
    Abhinav Sethi

  • TRM-TM TABLE "DIFT_POS_IDENT" IS NOT UPDATED

    When I create a money market transaction, the table DIFT_POS_IDENT is not updated.
    Only the securities transactions are updated in the table. I want to know if this is the
    correct situation or I can config it in IMG.

    What is the scenario you are executing ? This table belongs to Transaction manager in the treasury module. This group might not be apt. There is a seperate group for treasury and risk.

  • No accounting rule despite posting to general ledger ERP

    Hi expert,
    I create a securities transaction and faced this message in TBB1.
    No accounting rule despite posting to general ledger ERP
    Message no. TPM_TRAC1509
    Am I miss somethings in configuration? Thanks for any support!

    Hi tap nguyen,
    You have to maintain accounting principle in SPRO - Corporate Finance Management - Transaction Manager - General Settings- Accounting - Organization - Assign Accounting Codes and Valuation Areas.
    Regards
    Gouse

  • Sap treasury - taxation

    Hi,
    The client needs separate fields in Securities Module
    Service Tax,
    Securities Transaction Tax,
    SEBI Tax (Regulatory Taxes),
    CCIL Charges, etc
    How to achieve this?
    with regards
    raju

    Hi Raju
    You can create different taxes as additional flows and add them to each deal if required.
    Regards
    Juerg Heiz
    [email protected]

  • Mitigation plan

    Hi Gurus;
    I want to know whether conflicts happen for the following transactions in treasury and what are the mitigation plans involved:
    Change Securities Transaction (TS02)  and   Fixed-Term Deposit History (TM09)      
    Settle OTC Interest Rate Instrument (TO04)  and   Change Securities Transaction (TS02)      
    Fixed-Term Deposit History (TM09)  and   Check Dates against Calendar (TM22)      
    Collective Processing (FTR_00)  and   Deposit at Notice History (TM19)      
    Collective Processing (FTR_00)  and   Fixed-Term Deposit History (TM09)      
    Collective Processing (FTR_00)  and   Reverse Interest Rate Instrument (TM_55)      
    Collective Processing (TS00)  and   Settle OTC Interest Rate Instrument (TO04)      
    Create Fixed-Term Deposit (TM01)  and   Reverse Interest Rate Instrument (TM_55)      
    Create Interest Rate Adjustment (TI10)  and   Fixed-Term Deposit History (TM09)      
    Create Interest Rate Adjustment (TI10)  and   Reverse Interest Rate Instrument (TM_55)      
    I am very new in GRC and require help in this regard.
    Sumanta

    Hi Sumanta
    If you have GRC RAR already connected to your DEV system why not try creating some test roles with these combinations in them?
    If you give the roles full authorisation you will see what the object values are that would trigger conflicts at permission level and then work with the business unit's point of contact to see, if there are any conflicts, whether you can restrict the objects' activities sufficiently to retain both transactions or have to move to other users.
    Don't go straight to mitigation - especially in this area.
    Kind regards
    David
    Edited by: David Berry on Sep 27, 2010 5:49 PM

  • FSCM(ECC6.0) How to report securities' balance amount by each transaction ?

    Hello.
    My client asked me to make add-on report which shows securities' amount by each transaction.
    The image is like as below.
    Security ID #  1000    ABC Co.,Ltd.
    Date               Transaction #     Flowtype                             Amount                Balance
    2010.01.05    1000000001       0100 (Purchase)    10,000,000 JPY    10,000,000 JPY
    2010.01.06    1000000002       0200 (Sale)              3,000,000 JPY      7,000,000 JPY
    2010.01.10    1000000003       0200 (Sale)              1,000,000 JPY      6,000,000 JPY
    In my understanding, the structure of secrities database tables has changed since SAP R/3 Enterprise or higher version.
    So, to report balance amount, I must use logical database instead of selecting it from database table directly.
    Is it correct ?
    If you think using logical table isn't required, please tell me what tables should I look at.
    Thank you.

    Thank you for your information.
    I have just understood what information the SAP standard reports provide.
    And then, I have to develop add-on program for my client's demands.
    In my recognition, SAP has balance amount at the point of key date .
    But it may not have that at the point of each transaction.
    It means that when there are two transactions for the same security ID at the same date,
    SAP may not have balance amount of the security ID after the 1st transaction (before the 2nd transaction).
    And, Ravi reminds me of existence of valuation ,devidend and other flows.
    I can't help admitting that it's difficult to create appropriate program.
    I will spend more time to consider whether the program is essencial or not.
    Thank you all.

  • LSMW for transaction code -TRS_SEC_ACC- Securities Accounts

    Hi Experts,
    I have to create a LSMW for the transaction code TRS_SEC_ACC.please help me to find out any standard method for the above to create the Securities Accounts.
    Regards
    Swaraj

    I have never worked with the transaction
    TRS_SEC_ACC
    but F4 search help in  Bapi method in LSMW gives me
    BUS5200
    CREATE
    maybe OSS Note 777320 - CMS 3.0: Data migration from CML to CMS
    can help you further

  • TRM Securities - Interest transaction doesn't appear when executing TBB1

    Hello,
    I added the "Exchange Rate Settings" in Transaction Manager -- General Settings -- Organization. When executing again FWZE transaction occured a short dump with the followying message:
    Error in the ABAP Application Program
    the current ABAP program "SAPLFWBU" had to be terminated because it has come across a statement that unfortunately cannot be executed.
    I tried to research for a solution, but without success. Can you help me?
    Thanks in advanced,
    CEMENSA

    Hi,
    It may be  a bug. Look at note 1115401 to see if it is applicable to your release. Also, try FWSO to see if you get the same error.
    Mani

Maybe you are looking for