2 day old ipad's camera is stuck on the shutter screen and a reset doesn't fix it.
I am frustrated because I just got my ipad from the Apple store after waiting a month. The video slider won't work and the shutter picture stays on when I try to use the camera.
I would also recommend trying to "force quit" the camera application. To do so, follow these steps:
1. Open up the Camera application.
2. Hold down the power button until you see the "slide to power off" screen.
3. Once the power off screen appears stop holding the power button and hold the home button.
4. This series of actions will force quit the camera application. Relaunch it and see if that fixes it.
Let us know how that goes.
Similar Messages
-
How can I recover an old/disused iCloud account. I was having some issues with my apple id so I restored my iPad, I am now stuck on the activation screen as I no longer use the iCloud account i used to set up the iPad and can't remember the address or pas
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
my camera on my iPhone 5 is not working it's stuck on the shutter screen what can I do please help!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into OS X Lion.
I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
What can I do? Can someone help?
ThanksReinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
My Ipod touch is stuck in the password screen and I can't turn it off or cancel. The screen that it is stuck at says :enter the password for the exchange account "exchange"
Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears -
Help I just get stuck with the blank screen and the white circle
help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
My Ipod is stuck on the apple screen, and i've tried EVERYTHING
Let me vent a bit before my question:
I have had my Ipod Nano sent in 3 TIMES FOR REPAIR.
But they keep sending the original product back, still in non-functioning condition.
So, I sent it one more time.
I got it back today.
I plug it into my computer, and after about 45 minutes, my computer FINALLY recognizes it.
So I figure we're back in business.
Then, I start to update, and its says that it can't because it can't be read or something. (after it said it updated like 10 songs or something)
So then I reset the Ipod.
Now its stuck on the apple screen and I can't get it off.
I am so frusterated, you can't even imaginnnneeeeee how ****** off I am.
This freaking Ipod has been in shipping more then actual play time.
So then I made another request just now for repair, and it says that it already has a repair out, but my ipod just got back today..
So.
Could you please help me out here? I'm a little erked.
Thanks, Caitlin.have you tried connecting it to a/c power and not USB? Resetting in both cases? Letting the power drain? Ipod firmware updater?
I would call them again and get a supervisor or something. -
OK. My friend had bought an iPhone 4 online, second hand. He does not have the SIM card. He had recently changed his passcode and FORGOT IT, and we had to restore it. The problem is that, after we restored, it askes for the SIM activation. And none of us have a MICRO SIM Card. So my question is how can I find out what carrier the iPhone is with if it is stuck on the welcome screen and if I can borrow someone elses SIM card to activate the phone so he can use it.
(we could not contact the person he bought the iPhone from to find out what carrier it is with.)Go to the apple store and they will figure out what sim card it is.
-
my iphone is stuck on the itunes screen and when i try to restore it it just go back to the itunes screen how do i get out of it
Connecting in recovery mode will help: http://support.apple.com/kb/HT1808
-
I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play. Has anybody had this happen? And if so is there any solution?
Hey Christian,
I'd follow the troubleshooting steps below, from this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
See if that resolves the issue and gets your video playing again.
All the best,
David -
Please help I just bought this Ipod used and didnt know it was stuck on this screen. It is stuck with the apple screen and wont turn off even after holding bothe the on/off button and home button at the same time, itunes does not even recongnize the device i need to find a way to do a complete restore as if it were just purchased please help
Have you tried connecting it to your iTunes library in recovery mode using the instructions in this Apple support document?
http://support.apple.com/kb/ht1808
B-rock -
My iphone 4s is stuck on the update screen and my lock screen button is broken. How do I reset it?
I was trying to do the 7.1.2 update and my iphone 4s got stuck on the update screen, and my lock screen button is broken. How do I reset it?
iPod: How to use the Screen Lock
-
I am stuck in the big screen and cannot get out.
I hover the mouse at the top but the menu will not appear. The only way to solve this is turn off the computer. Surely there is a better way. What am I doing wrong?
I hover the mouse at the top
The top of what?
but the menu will not appear
What menu?
The only way to solve this is turn off the computer
Solve what? What iMac do you have have? What operating system?
What EXACTLY is the problem you are having?
I am stuck in the big screen and cannot get out.
Are you simply trying to reduce the size of the window? Justy click the green button. -
I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com
i have restarted my com, re-installed itunes and repeatedly tuned on and off my iphone to no avail. please help!!!
-
HT1369 my i phone 4 is stuck on the lock screen and showing a power cord with the i tunes symbol
my i phone 4 is stuck on the lock screen and showing a power cord with the i tunes symbol
LauraAnn41,
Help is our middle name! So let's jump into troubleshooting right away. Have you tried holding the power button and home key simultaneously for up to 30 seconds as an alternate reset? Please give that a shot and let us know how it goes.
EvanO_VZW
Follow us on twitter @VZWSupport
Maybe you are looking for
-
Does this mean that with the simultaneous bands, b/g devices won't bring down the speed of the N network? One of the biggest problems with the Time Capsule has been that to really have it work as a backup device, I have to also create a separate G ne
-
I read several posts about this, but nothing seems to be helping the issue. My i tunes is skipping on every song. Is there a way to fix this problem?
-
this is more of a post thanking the users of this board. Work is slow right now so I took the time to switch to leopard. Aside from a few small glitches everything seems to be fine on all my apps etc. I did a issues with studio 8 and compressor, but
-
All, I am in the process of parsing documents and creating a Word 97 document. This document only contains a table. I was able to successfully create the table, change the column widths, and add headers. One of the columns contains comma delimited va
-
Executing Operating system commands
Hi, I need to execute sql*loader from APEX(sqlldr scott/tiger CONTROL=ulcas1.ctl ). How can I implement this in APEX. In oracle forms , I can execute this by a trigger when-button-pressed in a push button - host('sqlldr scott/tiger CONTROL=ulcas1.ctl