2 Decimal points in inventory module

Dear Expert,
In SAP 2005, inventory module allowed for 6 decimal points somehow in SAP 2007, it does not allow for 6 decimal points only 2 decimal points are allowed. When I try to zerolise my Inventory quantity, they still remain some quantity in the in stock field.
Please advice.
Regards,
Saw Hua, Ng

Hi,
Refer this thread for what the decimal settings determines
Difference between Decimal places for Quatities and Units
Even if the quantity is set to 6 decimal,the item master shows only 2 decimal places.
Where as in the documents you can use upto 6 decimal places and same is stored in the OITM table.
And also you can only increase the decimal places and once if it increased it cannot be decreased in 2007 version,refer this note:1147799 on the same.
Hope this clarifies your issue !

Similar Messages

Function module to get the decimal point and leading zeros.

Hi
I have a requirement, where I need to add zeros at the end and beginning of the field along with decimal point.
For Eg:
input = 123
output = 0123.00
depends upon the requiremnt,number of decimals will vary
If anyone knows function module for this requiremnt or how to proceed with this, Please give me reply
Thanks&Regards
Rama.Mekala

hi
use this Fm
'conversion_exit_alpha_input'
PP_CATT_CONVERT_DECIMAL_POINT
for decimal points
Cheers
Snehi
Edited by: snehi chouhan on Jun 23, 2008 9:28 AM

Problem with decimal point in Korea and Japan

Hi all,
I have one problem with decimal points.
I need to change in my out put cuurency values as per japan or korea standards.
Please help me is there any function module for this one.
program using alv grid display.
i use write statement but it is not working. Because
data: L_AMT type glpca-hsl,
         G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.
here i need to do
L_AMT = G_AMT.   "" going to runtime error.
if i taken like
data: L_AMT TYPE CHAR15,
         G_AMT TYPE CHAR15.
CURR this value is 'JPY'.
WRITE L_AMT CURRENCY CURR TO G_AMT.   "" it is not working
Regards
margani

Hello,
This is pretty basic, whenever you've currency & quantity fields you need to pass the corres. reference fields.
In your case you need to populate the cfieldname & ctabname fields of the FieldCat.
BR,
Suhas

Currency Decimal points

HI all,
How to increase the decimal points of a particular currency. When I check in TCURX table maximum number of decimal points possible is 5. But I need to make decimal points as 7 for one currency. How can I do this?
Regards
Githen

Hi
This might be done through T.Code - OY04.
Caution:- This configuration step has Cross- Client effects. So be careful.
For interfaces, you can use function module BAPI_CURRENCY_CONV_TO_EXTERN_9.
the below is information is from a thread..
you can declare a variable with 7 decimals ..
data : v_p type p decimals 7
data : v_menge type p decimals 7
Hope this helps
Regards
Shilpa

How to increase Decimal Points for the BOM Component Quantity

Hi All,
While creating BOM:
Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
I can able to give only upto 3 decimal points, but the requirement is more than that.
I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
Thanks and Regards
Khadeer

Khadeer,
You would be better off changing the base quantity of the parent part. Instead of "1 EA parent contains .00003MG of component" you could say "100 EA parents contain .003MG of component".
Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP. In my view, there is no need of this kind of headache.
Best Regards,
DB49

Lost decimal point after export to text file

Dear All,
I have problem which to beset me long long time. I haven't dug the cause yet. Actually, I have a program which will generate a text file in background everyday. The text file included po data which is create last day, such as po no, item, unit price etc. But sometimes, not every times, one of item data's unit price will lost the decimal point in the text file, for example, the po unit price is 18.80 stored in database. but the outcome is 1880 in the text file. Do you have encountered such kind of problem? Thanks!

Hi
sorry cant get you..
need some more explanation
can you send me the code
Regards
V.Balaji

Dynamic displaying of decimal points for currency field in ALV

Hi,
        In ALV output there is a currency field and displaying data of different countries. It should display decimal point according to the country's currency. But at a time it can display data of different countries.

Hi Dilip,
I think your question is about currencies with different number of digits after decimal point. If you have the currency field in the ALV row, you have to give it's name as currency reference for the value field in the field catalog.
After creating the field catalog, call a form and do something like this (change fielnames accordingly).
<pre>
*&      Form alv_fieldcat_enhance
      Individual Enrichment of field catalog
FORM alv_fieldcat_enhance
CHANGING pt_alv_fieldcat TYPE slis_t_fieldcat_alv.
FIELD-SYMBOLS:
    <alv_fieldcat> TYPE slis_fieldcat_alv.
LOOP AT pt_alv_fieldcat ASSIGNING <alv_fieldcat>.
    IF <alv_fieldcat>-fieldname(5) = 'KBETR' OR
       <alv_fieldcat>-fieldname(5) = 'SKBTR' OR
       <alv_fieldcat>-fieldname(5) = 'DMBTR'.
Company code currency
      <alv_fieldcat>-cfieldname = 'BWAER'.
Document Currency for conditions, net value and taxes
    ELSEIF <alv_fieldcat>-fieldname(5) = 'KWERT' OR
            <alv_fieldcat>-fieldname    = 'NETWR' OR
            <alv_fieldcat>-fieldname    = 'NPAX_MWST_AMNT'.
Document Currency
      <alv_fieldcat>-cfieldname = 'WAERK'.
    ENDIF." <alv_fieldcat>-fieldname(5) = 'KBETR' or
ENDLOOP." at pt_alv_fieldcat assigning <fieldcat_alv>.
ENDFORM.                    " alv_fieldcat_enhance
</pre>
Regards,
Clemens

Decimal point for Price value in ALV Report

HI,
I have created ALV report,
I have 2 price fields in ALV report
For first field i have to display in the below format.
If the value of the field is 3601152 then I have to display it as 36011.52
For second field I have to display in the below format
if the value is 2494 then I have to display it as 2495.00
else if the value is 3498.73,then I need not to do anything.
that means If there is no decimal point, then I have to keep decimal point.
Thanks&Regards
RamaDevi

HI,
you can work with search and concatenate.
value1 = 3601152
search value1 for '.' .
if sy-subrc eq 0.
concatenate value1(5) '.' value1(2)+5 into text.
Or value1 = value1 / 100.
endif.
Regards
Nicole

How to delete decimal point and adding leading zeros....

Hi,
I have one requirement in the report   i.e.
        <b>Present Value    :</b> 44567.98
        <b>Expected Value :</b> 0000004456798
In the present Value how will I remove that decimal point and how to add those six ing zeros. I tried with CONVERSION_EXIT....but it is not giving. Help me...
Thanks in advance.
Regards,
Kumar.

Hi,
Use SPLIT and COMCATENATE fnctions.
Eg: split l_v at '.' into l_v1 l_v2
        concatenate l_v1 l_v2 into l_v.
For adding leading zeros
Use FM CONVERSION_EXIT_ALPHA_INPUT.
Eg:
data: tknum type vttk-tknum value '99156'.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
     exporting
          input = tknum
     importing
          output = tknum.
Sri
Message was edited by:
        Sri Tayi

Purchase price to have 4 digits after decimal point

Hi Friends,
Would you please help me out with this issue?
The purchase price needs to have 4 digits after the decimal point, because the product/component would be packed and sold in other unit, which may give huge value difference.
The price can be set for the product/component per 100, but is there any setting in SAP Reference IMG?
Thanks for your help.
Regards,
JT

Hi,
In material Master (MM01) which unit you maintain for that material. Go to MM02 and keep Base Unit of Measure as storing unit as earlier and maintain Sales unit (unit of measure in which the material is sold) or Order Unit (Specifies the unit of measure in which the material is ordered) in the Purchase Order according to your requirement and Enter the factor for converting the alternative unit to the base unit. In your case product/component would be packed in a Different unit.
OR
In your case product/component would be packed in a Different unit.
Maintain the (BOM) Bill of Material for the finished product you are selling and its component.Create Finished Product as material type as FERT and Components as material type as HALB or ROH.
Now try your transaction with Finished Product only and sale.
Hope the above will help.
Regards,
Biju K

Rounding off during APP (f110) of decimal point

Hi
Can any one help me? When I run the T.Code f110 for automatic payment programme is generate cheque propaly, here my client want to rounding off for the decimal point in cheque amount as if coin adjastment.

Hello Arup,
I guess OB90 is helpful to you so pls check the same.
Thanks & Regards,
Lakshmi S

Convert the money datatype to a 2 decimal point format.

Whats the best way to convert the money datatype to a 2 decimal point format in ms sql 2005 for use in my applications.
this?
CAST(tr.depositReceivedAmount AS decimal(10 , 2))

I respectfully disagree with the notion that you should change the SQL column from a 'money' data-type to something else.
In most database servers, 'money' is a data type that is designed to provide very consistent behavior with regard to arithmetic accuracy. In Microsoft Access, the representation is a scaled-integer. In MS SQL Server, it is obviously similar. Ditto Oracle and all the others.
You want the money data-type in the database to have this accuracy, because "hell hath no fury like an accountant in search of one lousy penny." The database column storage-formats are designed to satisfy accountants, and that is a Good Thing.
Meanwhile, you also want to take care as to exactly how you deal with the values. There are several points where rounding could take place. You do not have at your disposal the strongest possible handling of floating data-types in ColdFusion. You are also somewhat at the mercy of whatever interface software may lie between you and whatever SQL server you may use. "It's okay to round values once, but not multiple times."
I suggest rounding the value right before display, and stipulating that the user's input must be two decimal places.
Then, you might have to do some things at the SQL server's end. For instance, when you update a value in the table, you may need to use server-side logic to explicitly truncate the value to two decimal-points, so that an update of "$34.56" explicitly updates the column to "$34.5600." (This sort of thing has to happen within the SQL server context.) You know that the user's input has exactly two significant digits, but maybe (maybe not...!) the SQL server might not know this. You want to ensure that the server's internally-stored value represents exactly two significant digits, when the value originates from a user-input.
Don't err on the side of "your convenience" or "what looks good on-screen." (If you do, get ready to get phone-calls from the accountants, always at inopportune hours of the night.)

OBIEE 11.1.1.6 - Requirement is to show 3 digits after the decimal point.

Hi,
I have a requirement to concat 2 columns ( 1st column is a text column and 2nd column is a numeric column set as double in RPD). For the 2nd column, user wants to see 3 decimal digits all the time.
For example, if the value is 2.4567 then I need to show round off value 2.457 and if the value if 3.4 , then I need to show 3.400 and if the value is 4 then I need add decimal point and show 4.000.
Please let me know how I can achieve using OBIEE application without having to go through RPD.
Thanks
Swarna
Edited by: 934460 on May 15, 2012 12:48 PM

Try the following:
In this example:
Column 1: Month Name
Column 2: Revenue
Column 3: Month - Revenue
Formula for Month - Revenue column will be:
Month Name ||' - '|| cast(round(Revenue, 3) as char)Hope it helps.
Regards,
Kalyan Chukkapalli
http://123obi.com

Can't figure out how to solve the decimal point bug in this calculator code

Hi guys, I'm new in flash and is currently learning how to build a simple calculator with multipliers (plus,minus,multiple,divide,decimal point and change sign) but I'm stuck on the decimal point and change sign.
var multiplier_old:Number = 10;
var multiplier_new:Number = 1;
// .: Sets the multipliers so that new input numbers become decimals of a lower unit column
action_point.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
          multiplier_old = 1;
          multiplier_new = 0.1;
          point = true;
// Takes intput from the input_ buttons and adds it to the input after applying the multipliers.
// If `point` is true then the multiplier_new is divided by 10, also as described.
function inputNumber(n:Number):void {
          input = input * multiplier_old + n * multiplier_new;
                    if (point) {
                                    multiplier_new *= 0.1;
                   trace(multiplier_new);
          output_txt.text = input.toString();
Decimal point
The problem is that when I input 2.7 in the calculator, it will display the values in output_txt correctly. But then when I input 2.78, it will display 2.780000000000000000000000002. This will also happen to other numbers if the input is too big.
What I want is just 2.78. How do I change the codings to make 2.780000000000000000000000002 become 2.78?
Change sign
Any tips on how to start on this one?
Thanks for your time,
Zainu

I think you misunderstand what I mean. The weird decimal doesnt comes out after I press the 'equals' sign. It comes out when im just pressing on the caculator number buttons
First I click the no.2 button and then the decimal point button.
So the caculation output display will show
2.
after that I press the no.7 button
2.7
and then no.8 button. It appears like
2.7800000000000000002
This is the code I use when the user press the decimal point button.
// .: Sets the multipliers so that new input numbers become decimals of a lower unit column
action_point.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
          multiplier_old = 1;
          multiplier_new = 0.1;
          point = true;
// Takes intput from the input_ buttons and adds it to the input after applying the multipliers in the method described above.
// If `point` is true then the multiplier_new is divided by 10, also as described.
function inputNumber(n:Number):void {
          input = input * multiplier_old + n * multiplier_new;
                    if (point) {
                             trace(multiplier_new.toFixed(3));
                              multiplier_new *= 0.1;
                              //trace(multiplier_new);
          output_txt.text = input.toString();
I think there is some code wrong in this function that makes this weird problem. I tried putting toFixed method but it's still not working.
Sorry for this long reply but I have to try my bestto explain with my bad english.

How can I get the float variable in 2 decimal point?

after running the following simply manipulation program,
14.85 should be returned, but in stead, 14.849999.
how can i change the precision? i want the returned number in 2 decimal point.
public class TestC {
public static void main(String[] args) throws Exception {
               float var = 0.00f;
               var = (float)4.95 * 3;
               System.out.println(var);

There is absolutely no way that you can change the precision. It is fixed.
If you want to display two decimals places (which is not the same as changing the precision) then you can use the following.
float var = 0.00f;
var = (float)4.95 * 3;
java.text.DecimalFormat f = new java.text.DecimalFormat("0.00");
System.out.println("var=" + f.format(var));

2 Decimal points in inventory module

Similar Messages

Maybe you are looking for