2 different menus, using widgets and drop down

Hi,
I am looking to create 2 different menus for my website. the first will sit in top right hand corner and simply be Home | Contact | Brochures. The second menu is more complicated, with 6 different headings, all of which have a drop down menu. I understand using the manual option on the wdigets to creat both menus. How do I then add the drop down menus though? I can't see a way to do this.
I'll be so grateful for any help at all.
Thanks!

Hi
As you have mentioned you can create manual menu for both types, with manual menu you can add the drop down options with different menu items.
With widget such as accordion , the drop down would be the container area.
Regarding manual menu, here is a good example which you can use and then link menu items to specific pages :
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

Similar Messages

Creating a formula using a alphabetic drop down list?

I am creating a work sheet using formulas and drop down list. I have one drop down list that has a list of name and the second list is a list of letter that correspond to those names. (ex: column "J" on line "4 - 29" there is the letter
"A-Z" and then continues , in column "K" line "4" starts the list of names. In Cell B4 is the drop down list of names in column "K" to choose from, I would like the letter that corresponds to that name automatically
be put into cell A4, how do I create the formula in cell A4?

Hi Tina,
According to your description, please following these steps:
With your sample as shown in the following figure, select range “J4:K29”, and click
FORMULAS-Defined Names-Create from Selection, and check
Right column.
Then, use the enter formula in A4 “=INDIRECT(B4)”.
And I upload a TEXT.xlsx file on OneDrive, you can download this file via this link:
https://microsoft-my.sharepoint.com/personal/v-lzng_microsoft_com/Documents/Shared with Everyone
Hope it’s helpful.
Regards,
Emi

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

I am using Windows XP and just installed Elements 12. When I try to select a different brush or shape the drop down list will not stay open long enough to select a different item. I have used Elements 9 for awhile and have not had this problem

grannybel
It would appear that you are destined for the Adobe Photoshop Elements Forum since your question is related to Photoshop Elements and not Premiere Elements which is the focus program where you have posted.
But, while the arrangements are being made, here are a few things for you to think about if you have not already
1. Reset Tools - Select Brush Tool, then
2. Delete Settings File
Go to Full Editor/Edit Menu/Preferences/General and click on the option "Reset Preferences on Next Launch".
We will be watching for your progress.
Thank you.
ATR

Fire fow will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Firefox will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will lose all personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Can anyone tell me how to increase the text size in my menu bar and drop down menus?

Just bought a new 27" screen iMac. The menu bar and drop down menu text is much to small for me to see without leaning close to the screen. Does anyone know how to customize the text to a larger size. This is an issue for any program I open.

Once upon a time Apple displays packed in 72 dots to an inch (making their resolution 72 DPI). That meant that what we saw on screen at 100% scale was exactly what was printed on a printer - not to mention quite comfortable to read. However that advantage was eclipsed by the fact that photopgraphs and video were pixelated and the only solution to that was to increase the resolution - to pack in more dots per inch - which has the side effect of shrinking the size of text. Where I once used Word at 100% scale I now find it most comfortable at 150% scale.
There are several solutions. One, as Lex gave you, was to reduce the resolution of the LCD display. But unlike CRT displays, an LCD is tuned to a specific resolution and when you change it the results tend to be blurry. Another is to keep the resolution as it is and to adjust each program (if the program allows it). This makes Word usable and your browser can be set to use no font smaller than a size you set (which has some unpleasant side affects at some Web sites), but some programs and some parts of programs cannot be changed. The menubar and menus are among them. The third solution is one that Apple promised several years ago but has not yet provided - a resolution independant GUI. We can only hope that comes soon. And there's another partial solution - look in System Preferences under Accessibility.

Why are my slide shows disappearing and drop down menus not working?

I have a huge problem with clients currently waiting on a response from us.
We have created a website with MUSE, we have implemented slideshows and drop down menus which work fine when you preview them.
HOWEVER, once we put an editor in place for the client to then input their content onto the website, all of the slideshows disappear and the drop down menus no longer work!?
What do I do to rectify this problem??
Thanks Guys

This actually did work... But, I have figured out that the issue is really in IE7... and for whatever reason the code was making IE8 go into compatability mode (essentially using IE7).

AppleScript how to use "get" for field information and drop-down boxes?

Hi all,
First post.
Looking to use the "get" function or similar for getting information in a list or from a drop-down box or a field.
Example, you open keychain, open the info. for a cert and want to read the currently selected trust setting for "When using this certificate" drop-down.
Or, you want to check the Common Name field under details.
How would I return these specific values?
Thank you,
-b

The exact question being asked here: http://forum.soft32.com/mac/select-table-row-ftopict101735.html
But, that doesn't work with the latest AppleScript.

Font in Menu Bar and Drop Down list way too small

I just tried PSE 10 and was very surprised to see that Adobe did not address the problem with the font size being way too small in the menu bar and drop down list. I cannot possibly read the font - so the program is basically unusable. I am using a new 17inch laptop. Is it possible that after all the complaints Adobe didn't fix this problem in PSE 10? Are they even working on it? I love the program but unfortunately I am going to have to switch to something else because there is no way I can read the font and thus cannot use the program at all. Very, very disappointing. Hopefully they are working on a fix???

Photoshop CS5 Essential has preferences that offer users the opportunity to adjust menu bar background color as well as font size. For example,
"UI Font Size
If you find that Photoshop's interface text is a little too small for comfort, you can increase its size by changing the UI Font Size option to either Medium or Large. And no, this option isn't just for old folks with poor eye sight. Working on a very high resolution monitor can make Photoshop's interface text appear very small. Personally, I like to set my font size to Large which I find helps to avoid eye strain. You'll need to close and then re-open Photoshop for the change to take effect:
Change the font size to increase some of the text in Photoshop's interface.
(From an article by Steve Patterson at http://www.photoshopessentials.com/basics/cs5/preferences/ .
Why not Photoshop Elements? ?
Lensw

Pop Up Window and Drop Down Menu Question PLSS Help

Hi Guys,
Ne help would be appreciated I am designing a website in
Dreamweaver, I need to know how to create a custom drop down menu.
Is there anyway that instead of using the standard drop down menu,
you can customize them e.g use an image instead. For example, when
you rollover lets say Home a drop down appears but the menu is
customised e.g colour, text and any other small details.
Even when using the standard drop down menu, how can you have
a particular text, whenever I go to edit font list it does not show
the typeface, although it is activated in suitcase.
Secondly, how can I create a custom pop up window?
I would really appreciate any help for either of these
Many Thanks

hi,
Creator does not recognize (or whatever you say) characters like '<'. You can import js file which includes your script or change these characters for example put "<" instead of "<".
regards...

Images resizing when using drag and drop

We just recently got PS Elements 7. I have a blank image that is sized at 600 x 1662 pixels. When I want to put a photo into that blank, I make sure that the photo is 600 pixels high. With 6, what I used drag and drop from the bin, the photo fit perfectly. With 7 it is apparently resizing the photo and I have to stretch it to fit. Is this something that I have set wrong? If I am making sure that both items should fit together based on number of pixels, why is one changing size? Something has to be changing size or the items would fit together. I am assuming that something is set wrong, because this just does not strike me a something that should happen, or the program is not a very efficient photo editor. If necessary I will go back to 5.0, although there are things that I like better in 7.
jean @ buffaloworks

I'm frankly surprised you had success with this in PSE 6, since the past two versions create a special kind of smart object from images dragged up from the bin. You can use copy/paste to create a regular layer, or you can drag down to a thumbnail in the bin from an open image, but the project bin doesn't let you drag up anymore, by design.
Did you mean to say PSE 5 rather than 6? It worked normally there.

ABAP WebDynPro tutorials for Roadmaps and drop-down list box

Hi Experts,
I need some tutorials on Roadmaps and drop-down list box in ABAP WebDynPro which will show me step by step process how to create application using this. 'help.sdn' pages do show the procedures for implementing those ui elements.
And also the previous threads refer to some expired documents.
Thanks in advance.....
Plz help....
Edited by: Akashdeep Basu on Aug 9, 2008 9:30 AM

Hi
[SAP BLOG on ABAP-WEBDYNPRO|https://www.sdn.sap.com/irj/sdn/nw-development?rid=/webcontent/uuid/512040e1-0901-0010-769c-c238c6ca35d9]
[Step-By-Step Approach|http://help.sap.com/saphelp_nw04s/helpdata/en/79/002c2a0d43e645a39a89dd662b5f68/content.htm]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
Regards
Pavan

Why will my iMac Intel Lion no longer go to "sleep" using the Apple drop down menu?

How can I get my iMac (Intel / Lion 10.7.4) to go to "sleep" using the Apple drop down menu. I have never had a problem until recently.

Some process is running that is preventing sleep mode,
Zap the PRAM and see if that changes things.

Using drag and drop property in forms.

Hi all,
I want to use drag and drop property in a form during
runtime.I am using oracle 7.3.I don't want to call any
another application.
Is there any way?
Thx in advance.

Mona ! First tell your problem in brief ..Actually what you want
on runtime ...would you like to fetching the data from one item
to another or change the position of any item or
pushbutton ...or what..give detail ...obviously i can help you..
there are many commands like set_item_property ,
get_item_property but right now i could not understand your
prob ..tell me in brief..
You can ask me at [email protected]..
-Anwar

How do i drag indicator control type on WPF instead of using Drag and Drop points

In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.

Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this?

Question
I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this? I currently use this on my laptop, but recently bought a new computer and downloaded firefox and lost a lot of features that I enjoyed.

Hi Ruthannw,
I think you are talking about the [[Bookmarks Toolbar]]. That article will show you how to add sites to the toolbar and even how to display the toolbar if it is hidden in your new Firefox install.
Hopefully this helps!

2 different menus, using widgets and drop down

Similar Messages

Maybe you are looking for