2 different "switchable" audio output (HDMI and analog) with Mac mini

Hello,
I have a 2010 Mac mini that I use as a media center. Its hooked up to my HDTV in the living room via HDMI. I also want to hook up external speakers via the 3.5mm analog jack. These speakers are in the kitchen.
I would like to get my audio through HDMI when I watch TV and be able to get audio output via 3.5mm jack when I just want to listen to music in my iTunes library. I like to control my iTunes library with the Remote app on multiple devices.
Is it possible to switch automaticaly the audio output?
Right now I use my Airport Express to stream music from my Mac mini to the speakers but I think that the Airport isn't really needed since it lies just by my Mac mini. I'm pretty sure the mini can do both.
I've tried to hook the speakers to my Mac mini but first: I hear a "hum" in the speakers (wich I don't hear with the Airport) and second: I can't seem to get the audio out in the speakers.
I've read many posts about the audio midi settings but I can't figure it out...
Any help?
Thanks a lot.

I hit post too early... here's the rest of it.
See the Linein app- https://www.rogueamoeba.com/freebies/
See the SoundFlower app- http://cycling74.com/soundflower-landing-page/
See AU Lab- http://www.apple.com/itunes/mastered-for-itunes/
With those apps (or combination thereof)
You can copy an audio stream from one output to another.

Similar Messages

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

Dual use audio output HDMI and Headphone Jack on MacMini 2010

I am trying to use both the digital HDMI and analog headphone jack at the same time. My indoor home theater system use the HDMI and my outdoor amp and speakers are linked to the analog headphone jack.
Unfortunately, I can't figure out how to get both to work simultaneously like I had on my AppleTV. I was actually using the toslink and the HDMI on the ATV.
Anyone have any luck getting both outputs to feed at the same time, maybe by 3rd party software, on the Mac Mini 2010

see this discussion: http://discussions.apple.com/thread.jspa?threadID=2499492&tstart=15.
JGG

Simultaneous digital and analog with pulseaudio [solved]

Goal: have pulse audio output audio over HDMI and through line-out.
I found this thread which details two potential solutions to this problem. The more complex one isn't appealing to me, but the simplistic one quoted below is... but I can't seem to get it to work.
doorknob60 wrote:
Or easier solution this should work: open paprefs -> Simultaneous Output tab -> Check the box -> Switch to the virtual device in gnome's settings or pavucontrol
That's what I do to simultaneously output to my speakers and to HDMI, so I'd assume it would work for you too, even though you seem to have already figured it out.
Is anyone successfully doing it? My problem is that within pavucontrol>playback I cannot seem to select both the analog and hdmi sources. For example, I have mplayer playing a movie (should be HDMI) and mpd playing music (should be analog). My only two options under pavucontrol>playback are:
*Internal Audio Analog Stereo
*Simultaneous output to Internal Audio Analog Stereo
I have no option for HDMI.
Last edited by graysky (2012-02-09 00:44:53)

Got it! The key was understanding that whatever is selected in the GUI is the default device. I therefore selected HDMI as the device and added the following to
/etc/pulse/default.pa
### Load analog device
load-module module-alsa-sink device=hw:0,0
load-module module-combine-sink sink_name=combined
set-default-sink combined
After a restart of pulseaudio, I simply went into pavucontrol and defined which program would use which device. I'll update the wiki with these when I have some time. Thanks to doorknob60 for his original post.
EDIT: https://wiki.archlinux.org/index.php/Pu … log_Output
Last edited by graysky (2012-04-25 22:45:43)

The best audio interface with Mac Mini using new & existing equipment?

Hi,
I got my existing set-up back in 2003. I'm now about to update it.
I've talked to Apple Technical Support re which computer is best for me.
Some important questions remain in terms of the audio interface or sound bridge I should use.
I've detailed below my existing set-up, my existing configuration, my desired set-up (as recommended by Apple expert) and questions I have.
Existing set-up:
Hardware...
1. ViewSonic HDMI 1080p Full HD LED monitor
2. PowerMac G4 (PowerPC processor) computer
3. PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
4. MOTU 2408 mk3
5. Quested monitors
6. Focusrite Session Pack ff ISA220 compressor
7. MOTU micro lite (midi-usb interface)
8. Keyboard (yet to choose - I'll explain later)
9. ADK Tube Condenser Commemorative Edition microphone
10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
Software...
11. Tiger 10.4.11 operating system
12. Logic Studio 8 music program
Desired set-up:
1. ViewSonic HDMI 1080p Full HD LED monitor
2. Mac Mini full spec = £999.00
3. _______________________________________
4. _______________________________________
5. Quested monitors
6. _______________________________________
7. _______________________________________
8. _______________________________________
9. ADK Tube Condenser Commemorative Edition microphone
10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
Software...
11. Top-end operating system = Comes with Mac Mini
12. Logic Pro X music program = £139.99
Existing configuration:
ViewSonic HDMI 1080p Full HD LED monitor goes into PowerMac G4 (PowerPC processor) computer
PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
MOTU 2408 mk3 used as my audio interface for sound in and sound out. This means that the sound comes out of computer via the MOTU 2408 and out of my Quested monitors (they are active so self-powered) which are attached to the MOTU's outputs.
When I record vocals I sing into my ADK microphone (this microphone sources its own power from its own box which also feeds it Phantom Power) which is connected by a mic to jack cable to the Focusrite compressor which is connected by jack to jack cable to the MOTU 2408 which then goes into my computer via a firewire cable.
When I play keyboards or use my keyboard as a midi controller it connects to my computer via the MOTU micro lite (midi-usb interface).
I don't currently have a keyboard. I used to use my basic Yamaha PSR-540 keyboard as a midi controller but as it's not weighted and faulty I needed to get a new one. We got a new one via Thomann which was the M-Audio Pro Keys 88 keyboard but this quickly became faulty. We returned it and have since been considering other weighted keyboards. I am simply wanting a keyboard with Aftertouch, either 76 or 88 keys, weighted keys and very importantly, hammer action where the action is fast. I don't care for other controllers on the keyboard, on-board sounds, iPad compatibility or whatever.
My Questions:
Q1) Can you recommend any keyboards meeting my specifications?
Q2) I can't imagine any of the Blue or other USB mics competing with my ADK and I'm quite happy with it. For vocals and when I've wanted to play the keyboard in as audio (not as a midi controller) I've used the Focusrite compressor to boost the sound. I'm not using many functions/presets on the compressor as I know it's best to record the sound of vocals mostly raw, is this correct, and if so is it worth me continuing to use this compressor or sell it?
Q3) Do I need to have the MOTU micro lite (midi to usb) unit? Don't most keyboards these days connect direct usb to usb on the computer?
Q4) I'm happy and used to the sound out from my Quested monitors. I'm happy and used to the sound in using my ADK microphone. What do I need for these to work best with the Mac Mini? Is my MOTU 2408 good for this, or is another MOTU product needed, or another product altogether?
Q5) Depending on (Q4) do I need a soundcard installed in the Mac Mini as I read on a forum that these days the audio interface acts like the soundcard?
Q6) I have such a bad connection to the internet it's like I have Dial-up!!! I use Airport Wireless which is connected to a router downstairs, which is 02 Broadband. Internet's not an issue downstairs on my girlfriend's intel PC which also uses a wireless connection but not Airport. Is this a problem because of my Airport, or do I need to get a router for upstairs, or should I connect it directy to the router downstairs by ethernet cable?
Many thanks!

Is there a reason you don't want to use your current Tascam?

Can you use hdmi to rgb composite cable with Mac mini

I am thinkining of getting a mac mini .vI have a older jvc 2004 wit rgb composite conection .Can you use hdmi to rgb composite cable with Mac mini or do yo have to use a hdmi to composite converter to hook up to the tv wit Mac mini

12. Can I output via Mini DisplayPort to an RCA or S-Video connection?
No. The Mini DIsplayPort connector allows output to Mini DisplayPort, DisplayPort, VGA, DVI, and HDMI connections when using the proper cables and adapters. However, output to RCA, Component, or S-Video connections is not supported.
- The current Mini as one HDMI out. The Min somes with a HDMI to DVI adopter. Howver, the HDMI output only outputs digital signal and thus yo will need a converter to convert that digital signal to analogue composite
- The Min also comes with a Thunderbolt port which accepts the min display connector. However. based on 12 above it does not seem to support composite. The 12 is from
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)

Incompatibility problems with mac mini MA206LL/A* and linksys WRT610N

i purchased a new wrt610n and one of the machines that is connected is a mac mini, 1.66 ghz intel core duo.
#ma2066/ll/a for those who want to compare notes. the computer is stock with the 802.11g wireless card that came with the machine. it is running the current software and all the updates are up to date.
i am using wpa 2 personal w / aes
their is some kind of incompatibility or issue between the wrt610n and the mac mini.
either using the wireless connection OR connected directly to the router, web pages are very slow to load. sometimes it can take up to 45 seconds for the mac mini to open up a webpage. for 45 seconds it is at 'contacting website'
when i try to run software update, i get a time out error -1001, make sure you can connect to the internet and try again.
hulu desktop is also running slow.
copying a file from the mac mini to a another computer over wifi averages about 1 mb/s
when i informed linksys about this problem, they took my phone number and said that a linksys Technician / senior tech support employee would call me back. that was a day or so ago. i asked if i can have any newer firmware, considering the latest is 5 months old.
i am considering returning this router, but i don't see a lot of good alternatives that have similar features. i have 21 days to return this. the restocking fee will be 15% i am also considering various 802.11n solutions for the mac mini, even including the dell 1500 wireless mini card, i heard it works as an airport card.
if i do get a different model router i would like external antennas.
my previous router was a 5 year old wrt54gs version 2.0, and it never had a problem with any of the computers with the network.
the trouble shooting steps involved changing the beacon to 75 and the mtu to something else, i forgot. it did not make a difference.
i moved the mini and connected it wired to the wrt610 and turned off the airport wireless card and there was no improvement.
when i disconnected the wrt610n and connected the mac mini directly to my dsl modem. the issues were suddenly gone.
theres some kind of problem with this particular unit. and i would like to hear from others who have solved this or are experiencing the same problem

Just out of curiosity: what internet provider do you have? I'm just asking since I had similar issues after switching from AT&T DSL to AT&T U-verse. Sometimes pages took a very long time to load, or just a part or image of the page. Sometimes I would get a page not found error or something like this and only refreshing the page several times would retrieve and display the actual page.
Here's what I did: I went into my iMac's network preferences and switched the DNS server IP with one from OpenDNS.com, such as 208.67.222.222.
Since then I haven't had these issues anymore. Don't ask me why though; but I would be curious to hear whether this may fix your issue as well!

Analog TV with Mac mini

A have a Philips widescreen TV connected via DVI to Video Adapter. In the TV i have a converter from S-video to scart.
My problems are:
Why can i not get a widescreen resolution (1024 x 576) with the PAL frequency (50hz). Is there a way to fix this?
Even if i was prepared for a bad resolution, i was not prepared for the lousy picture quality. The colors seemes to be out of place and the edges are not straigth. Is there a way to fix this?

If you have a normal tv then I assume you have scart in the right? I also assume you have the converter cable that connects from your mac mini to the TV.
You need to do some testing, have the computer monitor in the same room as your TV so you can connect and disconnect the mac mini. If you can connect the monitor and the cable to the TV at the same time to the mac mini you can see what's happening.
Why don't you leave the settings as default on the TV and connect the cables, set your resolution on the mac mini first to 800x600, turn on the TV and press the AV button (its usually the same button that you press when switching over to the VCR or press 0 on the remote)
If you don't see the mac mini screen, connect it to the computer monitor. Go to System Preferences >Display >Color> select PAL or NTSC (I think you mentioned you PAL). Check also the button "Detect Display".
Its pretty an easy job getting the mac over to the TV if you have the right cable which I presume you do. But as I said I have only an iBook G4.

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?

babowa wrote:
Thanks; however, I was really referring to this: if it is preinstalled on a Mac, I believe the license is for that computer only (unlike an MAS purchased version which can be used on any Mac owned). Has that requirement changed?
At this moment, that's correct. The OS X license included with a Mac can only be used with that Mac. However, in the case the OP has purchased OS X Mountain Lion in the past, this may change

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around.

Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
and plays properly.
Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
Thanks again.
JP

Will i get Xcode with mac mini installed in it or do i have to install it..and from where..

will i get Xcode with mac mini installed in it or do i have to install it..and from where..

tabish78696 wrote:
will i get Xcode with mac mini installed in it or do i have to install it..and from where..
No you won't. You will need to download it from the
MacApp Store. It is a free download.

Hp photosmart 7150 only prints black and white with mac

My hp photosmart 7150 only prints black and white with mac. I have tried installing and uninstalling, installing drivers, but no change.

Hi,
You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
Search for your printer model form the list and select the driver, I believe that may work:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I'm trying to set up Continuity with mac mini and iPhone 5s and not working

I'm trying to set up Continuity with mac mini and iPhone 5s and not working, bluetooth not pairing

Your Mini is not supported.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

2 different "switchable" audio output (HDMI and analog) with Mac mini

Similar Messages

Maybe you are looking for