2 differents graphic cards at the same time for Mercury engine

Hi !
I'm working on 4K footage (R3D) with CS6 Premiere and Blackmagic Resolve, on a 6-cores i7-3930K (without integrated graphic card inside the CPU).
I decided to buy 2 graphic card, because Resolve "need" one simple graphic card for the software interface (GT610 1Gb with 48 CUDA cores),
and one strongest for the calculation (GTX680 4Gb with 1536 CUDA cores).
So I'd like to know if Premiere is like Resolve and if it will use the dumb card for the software, and the second for the CUDA engine inside MPE ?
Or will it use the 2 cards at the same time, like 48 + 1536 = 1584 CUDA cores ?
Or will it use only one of those 2 card ? And in this case, how can I chose the right one ?
(modify a configuration file, or put the strongest card in the first PCI slot in exemple ?)
Thanks for your help. ; )

Thank you John !
Ok, I read those thread... so, to summarize (and to be sure I understood everything) :
1) Premiere don't work with 2 GPU at the same time (no SLI / no 2x graphic card "alone").
2) I need to install the strongest graphic card (used in MPE) in slot 1, and the second graphic card (connected to my DVI displays) in slot 2.
3) I have to be really careful with drivers (but it's the same manufacturer, EVGA, and the same line, GT and GTX, so I don't think there will be problems)
and if I have problems, just need to desactivate the CUDA processing (in the drivers panel) of the card just used for the displays.
Can you just confirm me I'm right ?
(And, about Resolve, I saw the same slot configuration on the manual, so I hope everything will work : )
MAC PRO SLOT CONFIGURATION Optimum two GPU configuration
Slot                    Board                                            Function
4                        HBA or RAID card                          Storage interface
3                        Capture card                                  Video & audio I/O
2                        Single width GPU                          GPU for GUI
1                        Single or double width GPU          GPU for image processing

Similar Messages

2 cards at the same time for 4 track recording?

I have several Sound Blaster Li've! cards and was wondering if they can be used to do more that 2 track simultanious recording.
I'm trying to set something up for a local non-profit and use what is available rather than using their (practically non-existant) budget to purchase a multi-input card. We have 4 cards available (all SB Li've!) and I remember something about being able to gang the inputs through an auxillary channel to record more than 2 tracks at a time. Recording will be done under Reaper or Audigy in Win XP, or Reaper under Ubuntu 0.4.
Thanks in advance
Mike

yes I have! both actually.
I didn't even think about the driver side, just wondered if there was a hardware conflict first.
Now that you mention it that probably is the easiest way to go about it, Jack under Ubuntu would probably work as well.
thanks for the idea, now to go plug in a couple of cards

Importing more than one Memory Card at the same time

As a productivity tool for professionnals, Lightroom should allow us to import from more than one source at the same time, as Aperture do. I have a multiple Flash Card reader, and we cannot import all of them at the same time in Lightroom...
I know that I can copy them in a folder, then importing them in LR... But this is time and space consuming if I want to convert the file in DNG : it's okay if photography is a hobby for you, but when it's your full time job, and you often import 4 16Gb Compact Flash Cards at the same time, you don't want to waste time to wait the copying process on your hard disk, and then wait for the "import and convert to DNG" process : this process require to duplicate the files : RAW to DNG on the same hard disk, instead of Direct copy and convert to DNG from your memory cards to your Hard Disk.

You can have multiple remotes for one ATV, and one remote for multiple ATVs.
In our house we have two iPhones and one iPod iPod Touch, all able to control the same ATV at the same time (much to the delight of my daughter who enjoys ousting my music choices for her own).
Why have iPod touch in each room? Its not a wired remote - its a mobile device. Think of a landline vs mobile telephone - landlines are one per room, mobiles are one per person - that's how an iPod is used, even as a remote - you take it with you.
Just like a mobile phone, you'd have one personalised iPod Touch or iPhone per person, not per ATV or room.

Slatebook x2 - USB flash and SD card at the same time

Hello, after almost two years of using this device I had a situation when I wanted to connect USB flash drive and a SD card at the same time (I wanted to copy files from SD to the USB flash drive). I connected the SD card (standard size) to the keyboard module. It was mounted OK. Then I connected the USB flash drive to the keyboard module. This was not mounted at all (no error message). When I dismounted the SD from storage menu then the USB flash drive was mounted automatically. I tried various orders of connecting the devices. I managed to get them work at the same time but then suddenly the USB drive was dismounted. I did not try to perform factory reset (please do not ask this for every issue, I have quite apps, files and settings on the device). It does not matter if the Slatebook is connected to power source. The Slatebook software is fully updated.note: The USB flash drive and the SD card works without any problem when only one of them is connected. Does anyone use SD card and USB flash drive at the same drive? Does it work for you?

Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> lets you take the audio output from any application and add multiple effects. Using the "Auxiliary Device Output" effect will send the audio to more than one device.

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

My ipod touch is stuck in connect to itunes screen. I've tried to press Power and Home button at the same time for 10 seconds and all it does is go to a black screen. Press power button again and the usb cable with an arrow towards an iTunes logo.

I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

In addition to the FormsCentral subscription charge ($152.87 including tax) I was billed about the same time for $15.93. I can't find any way to get in touch with anyone from Adobe. The phone number I'm supposed to call is cut off on my invoice. Can someo

In addition to the FormsCentral subscription charge ($152.87 including tax) I was billed about the same time for $15.93. I can't find any way to get in touch with anyone from Adobe. The phone number I'm supposed to call is cut off on my invoice. Can someone respond ASAP? Thanks

I have forwarded your request to the support team that should be able to resolve this issue for you quickly. Expect to hear from them shortly.
Andrew

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!

Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

Capability to run external NFC usb + power at the same time for A1-07

Is it possible to run an external NFC reader via USB into the tablet plus keep the tablet plugged-in at the same time? We are planning to use a Y cable, but the real issue is whether the tablet h/w or s/w will allow or block this capability. Some other 7 inch tablets (eg Samsung, Asus) block this capability while others allow this.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Also reset the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

Can two bluetooth headsets access the ipad at the same time, for example, to watch a movie together on an airplane trip? does bluetooth work when the ipad is in airplane mode?

can two bluetooth headsets access the ipad at the same time, for example, to watch a movie together on an airplane trip? does bluetooth work when the ipad is in airplane mode?

This article: http://www.iphonefaq.org/archives/97903 helped to clear up confusion I had re your point
when Airplane mode is on you can turn on either or both wifi and bluetooth
It makes it clear that airplane mode turns off processes involving cellular networks, which doubtless involve rather strong transmissions, while allowing others such as wi-fi and Bluetooth. I'm puzzled though why the iPod rather than the iPhone has the airplaine mode when it has no cellular capacity. Perhaps it's there but doesn't actually do anything other than making it possible to conform to a request to switch into airplane mode, and display an airplane icon to satisfy flight attendants who are checkng up on you!

Can I plot 2 locations at the same time for each record in a table

I'm trying to plot 2 Locations (2 points on a Power View Map) at the same time for each record/project in a table
I can plot 1 location for each project of course with no problem
but I'm trying to show the Begin Point and the
End Point for each project at the same time
Is this even possible?

First of all THANKS this worked!
But now I stumbled on another issue. So I actually have 3 tables (and I've adopted them to the file you sent)
Table 1 => TripData
Trip
LongLat
Location
Type
TypeCode
Size
NW Tour
47.568077, -122.320800
Seattle, WA
Begin
0
1
NW Tour
47.035608, -122.884812
Olympia, WA
End
1
1
Cali Trip
37.808848, -122.412580
San Francisco, CA
Begin
0
1
Cali Trip
32.682611, -117.178348
San Diego, CA
End
1
1
Table 2 =>
TripInfo
Trip
OneLongLat
NTP
NW Tour
47.568077, -122.320800
1/1/2015
Cali Trip
37.808848, -122.412580
1/5/2015
Table 3 =>
ALLTrips
Trip
Stop
Owner
NW Tour
1
Owner1
NW Tour
2
Owner2
NW Tour
3
Owner3
NW Tour
4
Owner4
NW Tour
5
Owner5
Cali Trip
1
Owner6
Cali Trip
2
Owner7
Cali Trip
3
Owner8
Cali Trip
4
Owner9
Cali Trip
5
Owner10
Cali Trip
6
Owner11
This is how the Diagram View looks like in PowerPivot
Trip Data => Trip Info <= ALLTrips
Since I don't know how to post pictures
The MAP FIELDS are as follows
SIZE - Count of Stop(s)
LOCATIONS - OneLongLat followed by
LongLat (drill down feature)
COLOR - Trip
The problem now happens with the drill down feature
You can either plot OneLongLat which is the general location for each trip
Or LongLat of each trip which shows the begin and end points
But you can't use the drill down feature???
If instead of OneLongLat you use a
State Column it actually works!!!
I wonder if it has to do with the fact that both locations used for the drill down are Long/Lat numbers???
Any suggestions???
And again Thanks for the response!

How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
But in BIOS is possible set only disable or auto-detect. When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard. Please tell me, what can I do for enable both audiocards ?

It's been awhile but as I promised here is my update:
I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

Is there a way to order more than one type of card at the same time from iPhoto?

I would like to order a number of personalized cards from iPhoto, but I don't see a way of ordering them at the same time. It looks like they will all have to be separate orders. Is this the case or am I missing something? Otherwise, I pay more for shipping than I am for the card...in which case, I will just look elsewhere.
Thanks,
Denise

No - except for photo prints you can only order identical items as a single order - different designs or products must be different orders
LN

2 differents graphic cards at the same time for Mercury engine

Similar Messages

Maybe you are looking for