2 entery in cache for same receiver determination of which one is deleted

hello all,
I am new to sap PI. i am facing an issue where i am getting an error  No standard agreement found for , ECCSCPOCONFIRM, , ADV, http://xyz/SC2ECC/POconfirmation/recevie, SI_confirmeddetail_proxy_sender . What i found during my investigation is the system is picking a receiver determination which i wrongly created and had activated and deleted it. i dont see the reveicer determination in the ID ( may be becase i create the new one with the same name )_but i see the receiver determination in the configuation sceniro and the cache list that we get from ID-> enviroment _> display cache status overview.
How should i resolve th issue. how can i clear the cache. i have already tried the tcode SXI_CACHE and seleted the receiver determination and pressed start delta refresh with out luck.
please as this issue is very urgent.
Thanks in advance
BR heth

Hi,
in configuration scenario in the configuration overview i see one sender receiver combination( the one which i had deleted) in read. so in total i have 2 flow in overview on in read which i had deleted and another which is fine and not in read.
to expand the sender business component, it shows connection type is enhanced that is correct or it show RED symbol it contain error, please check it once do reactivate it and check all ID objects and do a complete CPA cache refresh and check for cache status in ID.
Incorrect agreement configuration or some cache problems (try to refresh cache and reactivate your scenario after some dummy change).
can you post what is you scenario.
Edited by: ganesh.nijampudi on Nov 7, 2011 10:25 AM

Similar Messages

  • Duplicate "Apple Loops for Garage Band"...which ones should I keep?

    Hi. I've just started using GarageBand 3 (3.0.4), and noticed that I have duplicates of each and every instrument loop. Both Loops folders are located in my user:Library, one in "Audio" the other in "Application Support". Once you drill down to the actual "Loops" folder, the contents are exactly the same. Which one should I keep, which should I toss (it takes up a gig, which is why I want to toss one.)?

    You have to locate your Loops Index files (good chance you have two folders with that name), then start GB and drag the loops that you still want into the Loops window for re-indexing.
    Uh presumably after you have located the Index files and before you start GB, you are supposed to do something to the Index files (like delete them)? Maybe this was implied, but it was not explicit.

  • Should I buy a Macbook Pro for college? If so which one?

    Going to college in a couple of weeks. I was planning on buying a Macbook Pro but I don't really know if I need it or if it's worth the price. I was looking at the 13 inch i5 and i7 versions. If I would buy the i5 one, I would like to upgrade the hard drive to 500G for an extra 50 bucks but was wondering if it was worth just going for the i7 processor version which already includes a 500G hard drive. It would be an extra 250 dollars. Also, if I buy either one of these, will it last me 4-6 years of college? I know that technology goes by fast and would rather spend an extra couple hundred dollars if its going to last me longer. I am majoring in Petroleum Engineering and will not be using much video editing or gaming.
    I've been reading many reviews and statements about Macs from all over the internet but I have a few more questions about Macbook Pros. I have always been a PC guy.
    Do Macs really stay fast longer? Like doesn't slow down as much.
    How limited is the compatibility now days?
    Worth the big price tag?
    How big of a difference is the i5 and i7 processors?
    Can you put a laptop lock on it? It will probably be a big target for thieves and I hear there are many in college.
    Should I get Apple Care?
    Is there more programs I would need to buy? I am getting a 100 dollar gift card thing to the apple app store but wondering if I need Microsoft Office or something that isn't from the Apple store
    The reason I ask these questions is because I would rather have an answer from a community of people with multiple answers and opinions than a biased website or reviewer. Well there will be some biased since this is an apple forum but please answer truthfully and as unbiased as possible please! Thanks!

    Mac 101
    http://www.apple.com/support/switch101/
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/macbookpro

  • Mail not send in the same receiver oder in which intended......

    Ive created the reciever list using the following stmt:
    LT_RECLIST LIKE somlreci1 OCCURS 5 WITH HEADER LINE,
    at runtime im able to see the reciver in this table in correct order , but the mail header shows a different mailing order when mails are recieved.
    Even im not using sort stmt. dont knw how mail order get disturbd. Is it on the SAP system to decide the order..??

    no soln for that...
    THanx,
    Naveen VIshal

  • Too early for the retina, too late for the non retina? Which one?

    Hi everyone,
    Sorry for yet another "Which MBP should I buy" post but I have read through all the of the discussions I can find on this topic as well as around the web.
    I am a digital designer who is currently using a PC only because up until now I have never been in the financial position to transition over to Mac.
    I am currently trying to decide between getting a a 15" Mac Book Pro or 15" Retina Mac Book Pro.
    15-inch: 2.6GHz
    2.6GHz quad-core Intel Core i7
    8GB 1600MHz memory
    750GB 5400-rpm hard drive1
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
    High res anti-glare screen
    versus:
    15-inch: Retina display
    2.6GHz quad-core Intel Core i7
    8GB 1600MHz memory
    512GB flash storage1
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
    I will be using Adobe CS6 Photoshop, Illustrator, Flash and Dreamweaver sometimes all at the same time. I occasionally have a video project where I will be using Premiere and After Effects. I am also looking into upskilling myself and becoming versed in at least basic 3D modelling. I am looking at a MBP because portability is important.
    Given my job, going retina seems like a no brainer but I have a few concerns:
    Speed, processing power - which will suit my needs?
    This is an investment for me, I want it to last at least 3-4 years:
    Is getting a standard MBP now just too late and bidding in the past?
    Will resale of a standard MBP suck in 3-4 years?
    In 3 years time will I need an upgrade, and if so, how will I even do this with a virtually unupgradeable (from what Ive read) Retina MBP?
    About 80% of the time I plan on hooking up the MBP to a Thunderbolt display - whats the point in a Retina?
    If I don't get a Retina and I need to start designing Retina graphics, will I be faced with added dificulty because I use standard MBP?
    Is it realistic to assume Retina graphics won't become mainstream for 3-4 years allowing me to bide my time with a standard MBP, upgrading to a Retina later?
    At work I use a 2-3 year old iMac and the screen is already magical compared to my PC and it seems to do fine for me. I've been in store and played with both and I am genuinely confused. I just feel like getting a standard MBP is like jumping on a train when it's already reached it's destination.
    Budget wise I can afford the base level Retina MBP I outlined above but if I can save money, that'd be ideal. Being me I will automatically chose the best possible solution but I need to be rational about my needs. Someone please help, I just want a Mac!
    Thanks in advance, any help is much appreciated

    kytim wrote:
    I need to be rational about my needs.
    In general
    Retina cannot upgrade RAM.  Storage can be upgraded, but more $ than upgrading the non-Retina unit.
    Non-Retina unit can upgrade RAM  base-4 GB to 16 GB for about $85 (cf. OWC.)  HD can be replaced with SSD or larger HD.   
    Therefore lack of "upgradability" in Retina
    No optical drive in Retina.
    The non-Retina has  Ethernet and FireWire ports, and a slot for a secure cable- the Retina  none of these ports.

  • HT2534 What to do? Help please. Free app asking for billing details. And which one to use apple id or iCloud id?

    When i want to install a free app using my apple id [email protected] - it asks me to enter billing details...why is that? :s
    What to do?
    And when i try to install it using my icloud id [email protected] , it does give me the option of 'none' in payment method but when i select it, it asks me to first fill in the details only then it would move to the next step.
    And i wanted to ask....is it better to use my id the one with [email protected] or [email protected] ?
    PLEASE HELP!!!!

    For a standard account, a valid payment method is required even for free apps.
    You can create a new account w/o a CC that is only good for apps by following these instructions
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

  • Export Setting for Internet... Which one?

    I am exporting from LiveType. When I import into iMovie, the font looks much lighter, and the shadow more pronounced.
    The trailer is going to be published on the internet. Which export settings etc. do I choose? They are all greek to me.
    Thanks for your help. (Sorry... I'm an old analog editor!)

    Well, Flash is the most obiquitous format, but you can't export it from Apple software, you need third party software to do this... Telestream's Episode Pro, or Sorenson's pro Flash codec works nicely as well.
    Next IMHO, would be h.264, but this presumes the viewer will have installed QuickTime 7 (there's one for macs and one for PC's too and it's free). The presets work quite well for this, and what you need to decide is the bit rate. Assuming your viewers will have a fast connection, you can use the higher bit rates. It's a matter of deciding how fat a stream you can deal with ( the fatter the better quality, however the slower it downloads of course)
    Most of the world is PC's so if your viewers are likely to be on that platform, then WMF's might make the most sense, but again, you'll need third party software to make them. Flip4Mac seems to be the preferred software here.
    Jerry

  • Is it safe to download a "free" youtube video converter for MAC and if so, which one is recommended?

    Is it safe to download a "free" Youtube video converter (Ex. "freemake.com") for MAC or is there a better program recommended to convert these videos to DVD?  Thanks!

    Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.

  • Getting a Case(Shell) for my White MacBook. Which one to get?

    Hey guys, my question is what should i get as a shell. I read the reviews for the spec shells that they stain the macbook and scratch it. What should I get? And another question what product would you guys recommend for cleaning the screen?
    I have the 13'' white macbook.

    I wouldn't bother with a shell myself. They don't really do anything but waste money and add unnecessary bulk to the system. They aren't going to magically protect your system from a good drop off a table or anything like that. Hard shells will just translate all that energy right into the system. A rubberized shell might absorb SOME of the shock, but probably never enough to really be worthwhile.
    As for cleaning the screen... A soft lint free cloth and a little water is all you should really need. Just go to an auto parts store, or the auto parts section of some retail store, and get a chamois.
    The most important things to remember here is to turn the system off and remove/disconnect the battery FIRST. Then you want to be gentle with the pressure you apply to the screen. It's very easy to crush the little LCD cells and transistors that control them, so do not press hard. If you have ever seen how an LCD discolors if you press your finger against it, that is a warning sign that you're pressing too hard and are in danger of permanently damaging the screen. So use less pressure than that.

  • Two phone lines on the same SIM card - but which one is active?

    I have two phone lines on my SIM card. Of course, only one of them can be active at one time. The switch between them is done through a SIM application which is loaded on the SIM card (supplied by the carrier)
    My question is that, sometimes I forget which line is the active one. Is there any way of seeing my active phone line?
    All my prior not-so-smartphones showed Line1 or Line2 in the home screen. But i could not find if iphone does this.
    P.S. settings-phone-my number does not answer this question, as it always displays the phone number that the iphone is registered to.
    Thanks

    Your husband needs to put his sim in an iPhone & turn iMessage off to fix this. If your husband setup a support profile with Apple, he can also login to that support profile & remove the phone.

  • I need a car charger for my iPhone 5. Which one?.

    Hi, i need a iphone 5 car charger. There are so many chargers, which is the best car charger?.
    Some chargers say 5watts and other say 10watts, i don't know the difference.
    I found a Belkin iphone 5 car charger, is it good?.

    yeah but if i buy the 10watts one, it will damage my iphone 5?.
    or is better to buy the 5watts one and that's it?.
    another question is, is better to buy a Lightning cable OEM and this http://www.belkin.com/us/F8J044-Belkin/p/P-F8J044?q=::devicePath:/Device/IPHONE/ IPHONE5
    or this:
    http://www.belkin.com/us/F8J078-Belkin/p/P-F8J078?q=::devicePath:/Device/IPHONE/ IPHONE5
    i just want the best fo my iphone 5.

  • Xpath expression in Left and Right operand for Receiver determination

    Hi Experts,
    Is it possible to use an Xpath expression in both the Left and Right operand inside the Receiver determination e.g.
    (/Message/line/IDNumber = /Message/line/IDNo)
    Any help will be appreciated.
    Thank you,
    Brendon

    in standard receiver determination you  can only specify value for the right operand.
    that is  one of the reasons you go for enhanced receiver determination
    as mentioned in the sap help
       If you are using the condition editor to define receiver determinations or interface determinations, you can only use the expression editor to create an expression for the left operand. You must specify a value for the right operand.

  • Context object not visible in configuration (for receiver determination)

    Hi,
    I've created a context object and depending on that I want to forward the message to a specific receiver. But when in that pop-up window for the receiver determination I cannot find the context object. I can only find the technical context objects defined by SAP.
    Do you have a solution for that?
    Regards
    Volker

    Hi Volker,
    you can solve your task by using a <a href="/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16 Receiver Determination</a>
    Regards,
    Udo

  • Receiver Determination

    Hi,
    We are running SAP PI 7.11.
    Input message:
    <?xml version="1.0" standalone="yes"?>
    <SITE_ERROR xmlns="http://test.com/SITE_Error">
      <ERROR_DATA>
        <ERROR_DATE>20110120</ERROR_DATE>
        <ERROR_TIME>060002</ERROR_TIME>
      </ERROR_DATA>
      <SITE_INFO>
        <SITEID>AZAZ</SITEID>
      </SITE_INFO>
      <ERRORS>
        <ERROR>Version 2.00</ERROR>
        <ERROR>Bla Bla 1</ERROR>
        <ERROR>Bla Bla 2</ERROR>
        <ERROR>Bla Bla 3</ERROR>
      </ERRORS>
    </SITE_ERROR>
    I require to route the message for delivery if a second node in XPATH /SITE_ERROR/ERRORS/ERROR occurs else it will not be delivered.
    It seems that receiver determination with a condition in the form of a XPATH expression should solve this problem as I would be able to determine if there is a second "ERROR" node and if there is then route it for delivery. However when the rule is not satisfied then for "If No Receivers Is Found, Process as follows:" rule I set "ignore".
    Please could you leant some assistance in constructing the XPATH expression? I have it down as:
    (/SITE_ERROR/ERRORS/ERROR[(2)] EX )
    Your assistance in this matter will be greatly valued.
    Regards
    Willie Hugo

    your Xpath condition seems fine as you have used EX in that it will check for existance of the field element and will route that interface to mentioed system..
    which is right.. but as you mentioed its not working I think there is possibility that its problem of cache ..
    just to rechcek..
    -- check Cache status..
    -- go to SXI_CACHE and check status for your receiver determination object..
    -- if everything is not green then try to activate receiver determination one more time.. just to be on safer side you can reactivate all ID side objects..
    then again check your scenario..
    this is about Xpath..and as you mentioed "If No Receivers Is Found" you have selected igonre then in this case it wll just ignore this message and will not show in SXMB_MONI also..
    here you can select alternate business system or for timebeing select same receiver system and check.. if it is working..
    it should work as your configuration looks fine..
    Thanks,
    Bhupesh

  • No receiver found in Receiver Determination

    Hello Experts,
    Sub: Calling integration process (which in software component1) from sender service interface_Out (which is in another software component2) in Receiver Determination Fails.
           There are two software components, S/W C1,  S/W C2,
            In  S/W C1,->
            Integration process (IP1)created in S/W C1, with name space NS1,
            Service interface1(abstract) SI1 with message type MT
            In S/W C2,->
            Sender service interface2 SI2(outbound) with message type MT with namespace: NS2
    (MT message type, in both service interface holding the same,
    used SI1 In receive step in IP1.
    Interface Determination from BS2,SI2,NS2<->   IP1,SI1(No mapping).)
    In Receiver Determination,
    Business system BS2;
    Sender Service Interface: SI2;
    Name space: NS2, 
    In Receivers  :  IP1
    Problem is :  do not find this receiver.
    I have to call this process, like this.  Please help on this.
    Use case is:
    single Soap request is coming, many application are using the same using common Receiver determination( which in S/W C2), 
    Now i have to use the same receiver determination to send this message in IP1 which is in SW C1;  
    -> any alternative solutions for this                      
    Thanks,
    Deviprasad.

    hi,
    when you use Integration Process the configuration in the ID must be
    Receiver Determination 1:
    Sender System: XXX
    Enterprice Services (outbound)
    Namespaces
    Target System: Integration Processes
    No Mapping requiered in Interface Determination
    Line:
    Receiver Determination 2::
    Sender System: Integration Process
    Enterprice Services (Abstract)
    Namespace
    Target System: YYYY
    No Mapping requiered in Interface Determination
    Sender Agreement=1
    Receiver Agreement=2
    Interface Determination=2
    Communication Channels=2
    Take in mind that in the Interface determination you have to define as receiver structure the Service Interface (Enterprice Service in PI7.1) type Abstract. if you cant select it delete all filter in the popup qhen you have to select the Inteface in the reciver structure.
    Check the Integration PRocess if you define the SI_XXX_abs in the reciver step.
    check all changes in the ESR were activated
    Check this out and let me know
    Edited by: Rodrigo Alejandro Pertierra on Sep 3, 2010 2:42 PM

Maybe you are looking for