2 errors when trying to install cs4 on windows 7 ultimate x64

I downloaded the trial version of PS cs4 to try out on my new laptop.  Its a clean install of windows 7 ultimate x64.  I gets maybe 10% into the install and i keep getting these errors...
Adobe ExtendScript Toolkit CS4
Error:
Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
Adobe Output Module
Error:
Error 1610. The configuration data for this product is corrupt. Contact your support personnel.
If somebody could shed some light on what i can do to make this work that would be great.  Ive tried redownloading the installer probably 4 or 5 times now.  Ive tried running in compatability mode and ive made sure its being ran as an administrator.
Thanks

Some of CS4 might be installed so you will need to run the clean script.
http://www.adobe.com/support/contact/cs4clean.html
Just install photoshop and bridge only. You can install the other stuff later on (not need to run bridge nor PS anyways)
Do the install only on C drive too.

Similar Messages

  • TS3212 I get a side-by-side error when trying to install iTunes to Windows 7 64-bit???

    When trying to install iTunes to Windows 7 64-bit, I get a side-by-side error. Has anyone else seen this problem and were you able to resolve installing iTunes? If so, how did you resolve it?

    Hi
    Hope you are fine there!
    recommend that you attempt to resolve this issue by uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7:
    http://support.apple.com/kb/HT1923
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows XP:
    http://support.apple.com/kb/HT1925
    Take care!

  • Error when trying to install iTunes with Windows 7

    I am using windows 7 on my laptop and when trying to install iTunes i recieve the following error message
    Apple Application Support was not found.
    Apple Application Support is required to run iTunesHelper.Please uninstall iTunes, then install iTunes again.
    Error 2
    After uninstalling and re-installing iTunes, the error still occured.
    Anyone any ideas how to solve this?

    After searching through this forrow i found this
    http://support.microsoft.com/kb/946414
    After running the Fix-It, i had no problem installing iTunes

  • Error when trying to install itunes on Windows 7

    I am trying to install ITunes on A Windows 7 and get the following error microsoft.vc80.crt,version="8.0.50727.4053",type="win32",publickeytoken="1fc8b3 b9a1e18e3b",processorarchitecture=amd64"

    although the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

  • TS3212 Insufficient privileges error when trying to install itunes in Windows 7

    I'm trying to install itunes on a machine with windows 7 and keep getting the error that installer has insufficient privileges to access this directory c:\programdata\microsoft\windows\startmenue\programs\itunes.  I am logged in as an administrator.  Does anyone know how to fix this.  Thanks,

    After searching through this forrow i found this
    http://support.microsoft.com/kb/946414
    After running the Fix-It, i had no problem installing iTunes

  • Error when trying to install iTunes on Windows laptop.

    Everytime I try and install iTunes it come up with an error 'The feature you are trying to use is on a network resource that is unavaliable'  It allows me to enter an alternative path but I am not sure what I should be using?

    Many thanks.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

    I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."  I just trying to get the latest version of iTunes.  Thanks

    "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

    action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

    Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    Thanks,
    Sunil

  • I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

    What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

  • How to resolve message "Installer database is corrupt" when trying to install CS4 on Win 8.1?

    I purchased a disk set of CS4 a few years back and have recently purchased a new computer. When trying to install CS4 on the new computer, I received an error message saying "Installer database is corrupt. Please contact Adobe Customer support." Called "customer support" and after a VERY long time and three transfers, I was told "Too bad, we can't help you. Maybe download a new copy?" So I did. When trying to install the fresh download, I received the exact same error message: "Installer database is corrupt. Please contact Adobe Customer support." This appears to be a conflict between the CS4 installer database and Win 8.1. Is this a known issue? How do I resolve it? Thanks for any assistance. ~Evey

    Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 4 or point product

  • "Shared Resources error" when trying to install Photoshop Elements 11

    I keep getting installation error "Shared Resources error" when trying to install Photoshop Elements 11 (Windows 7).  Any advice will be appreciated..

    Welcome to the forum, Ted,
    Here's an older "Shared Technologies" thread: http://forums.adobe.com/message/3155897#3155897
    But, I am not sure that we were ever able to help the OP, and they never reported back with the responses from Adobe. Still, might be a tip that is useful.
    Good luck,
    Hunt
    [Edit] I mis-spoke. The OP and another user with the same error WERE helped. What I saw initially was yet another poster, who was going to contact Adobe, but never came back to the thread. In the case of the OP and another users, the issue was caused by having Adobe Bridge, included with other Adobe programs, like Photoshop and Premiere Pro, running. When they killed that, the installation went well.
    Message was edited by: Bill Hunt

  • HT1926 Error when trying to install iTunes 'iTunesSetup.exe was reported as unsafe.'

    Get an error when trying to install iTunes 'iTunesSetup.exe was reported as unsafe.'
    Any suggestions for how to fix this?
    I am using Windows Vista and IE9.

    After using the Windows Installer clean up tool and removing the iTunes 7.0.7.16 install file I was able to update to 7.0.2

  • Edge Animate error when trying to install

    I'm getting an incomplete install when I try to download and install Edge Animate:
    Exit Code: 6
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: DirectX 10.0.0.0 {9DDAF699-BA5E-48e3-8A09-7AC369D6EEA1} -----------
    ERROR: Third party payload installer DXSETUP.exe failed with exit code: -9

    Re: Edge Animate error when trying to install
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Edward do you meet or exceed the system requirements listed at http://html.adobe.com/edge/animate/tech-specs.html?
    Jip I sure do!
    I checked the program in discussion just for the heck of it and it works. But when using the Adobe applications manager it says not correctly installed. So I don't know what is going on there!
    It is just unappreciated to have people like Mylenium give such unhelpful replies to customers who are really keen on learning and using your new products.
    (I must probably add that I have tried installing the demo version of Photoshop CS6 when it was just released and caused a serious error. And when I wanted to uninstall it, the uninstaller suggested I use Adobe removal software to remove the demo software... this also did not work properly and I’m still stuck with a error message every time I log on to my windows account)
    But thank for the prompt reply Jeff, keep it up.

  • I am receiving an A12E5 error when trying to install my Creative Cloud desktop

    I am receiving an A12E5 error when trying to install my Creative Cloud desktop. So I cannot proceed to a free trial. Thoughts?

    Hi UniversityDesigner,
    Welcome to the Community!
    Please go through this thread: http://forums.adobe.com/message/5581753#5581753
    Thanks!
    Ankit

  • I get an error when trying to install updates in Photoshop CS6

    I get an error when trying to install updates in Photoshop CS6. It says "Update Failed; Updates could not be applied." Anybody else have this probelm?

    Brooks Potteiger I would recommend also reviewing the installation log for the update you are trying to apply.  You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Maybe you are looking for

  • Can not see messages in SXMB_MONI of ECC

    Hi Friends,              Here I am facing some problem with SXMB_MONI of ECC. I am doing an XI upgrade from XI3.0 to PI 7.1. when I am doing my interface upgrade I am unable to see messages in SXMB_MONI of ECC. As ECC is also got upgraded  now BASIS

  • How oracle decide whetehr to use index or full scan (statistics)

    Hi Guys, Let say i have a index on a column. The table and index statistics has been gathered. (without histograms). Let say i perform a select * from table where a=5; Oracle will perform a full scan. But from which statistics it will be able to know

  • Early 2009 24" iMac CONTINUALLY crashes...

    The system freezes and/or restarts at least once a day as well (usually more like 3-10x), seems to be worst in Safari, but also happens on waking from sleep and anything that is graphic-related (I almost typed graphic-heavy, but even small graphic fi

  • Is Infinity connection possible???

    I am in an area where the local cabinet, (Much Marcle ,(WNMM)), is fibre enabled. The line checker says that fibre isn't available to me when I enter my phone number, however if I enter my address it says that it is. The households either side have f

  • Query waiting for objects...

    Hi, I have a Pl/Sql query which when run is taking a long time to execute. When i put a trace on it, i found that it is waiting for 2 objects and as soon as the wait is over the query produces the output immediately. I tried puuting index on tables w