2 EWA reports for 1 system?
Hello,
We got ECC and BW in the same system, with different clients number - and we got one EWA report every monday that cover both clients.
Is there any way that I can set up EWA reporting so I got one EWA Report for my ECC client, and one other one for my BW client?
Best Regards,
Karl Yngve Andersen
Maybe you can do this with 2 solutions.
Transaction SMSY_SETUP or dswp.
Edited by: Nico Effenberger on Oct 20, 2008 1:41 PM
Similar Messages
-
EWA reports for non abap systems
Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir -
EWA report for non-abap systems
Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
VirgilioHi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram -
Configuration of EWA reports for java systems.
Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks -
EWA Report for DEV/QAS System (if possible)
Hi Experts,
I would like to know if it is possible to generate EWA reports for DEV/QAS Systems. I believe i have set up all the necessary RFCs for our SOLMAN to communicate with the DEV/QAS systems.
When I try to create an EWA session in SDCCN of the DEV/QAS system, the only destination i can choose is "NONE" which is local.
Any idea how I can send this to my SOLMAN. My SOLMAN is already configured to be the master system of my DEV/QAS system.
Any help would be appreciated.
Thanks.Hi Prince Jose,
My problem actually is that I want to set up EWA for a DEV system. I have tested all the RFC connections to and from my SOLMAN.
Even the RFC connection in SDCCN -> Settings .. -> RFC destination, i have 2, one SAP_OSS and my 'back' RFC to my SOLMAN and everything is working OK.
Would you be able to give me a step by step guide on how to setup EWA. From what i know:
1. Setup the system via SMSY (done)
2. Generate the necessary RFCs (done and tested OK)
3. Set SOLMAN as the master system of the satellite systems (done)
4. Create the necessary task for EWA via SDCCN of satellite system
Are the steps correct?
Thanks -
EWA Reporting for NONSAP Systems
Hi all,
we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
Thanks in advance for your help.
Regards
Anton BrehmHello,
I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
This should clarify the answer for you.
Regards,
Paul -
EWA reports for SAP Content Server
Hi
I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for SAP Content Server.
As per Content Server for EWA reports need to be configuring only Database and OS.
Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
Regards,
PanuHi There
In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
this link below..
http://service.sap.com/EWA >> Media Library
Best Regards
Jai Wardhan -
How we can get report for system shutdown for perticular year.
Dear Friend,
How we can get report for system shutdown for perticular year.
i.e. i want to know at what time and what date system has been shutdown for ther of 2006.
Thanks,
SachinDear Sir,
Thanks,
But from system log file SM21 i have got only the time not date on which it has been shutdown and restart.
And another thing is that 15 dats before Log file data is atomatically deleted, so cant get it back.
Can you provide me is any another solution? i.e by heating perticular T code report come>
Sachin -
Dear Experts,
We have installed Solution Manager 4.0 with latest Patch Level.
We also have BI 7.0 and ECC 6.0 Systems in Landscape.
Requirement :
I have to generate <b>Early Watch Reports</b> for the both BI & ECC systems in our Solution Manager.
Please Let me know the configuration & steps for integration and to generate EWA's for the systems on a weekly BASIS.
Blogs / Links / Guides are highly appreciated.
Thanks in Advance to all SOlution Manager Experts.
Regards
PRhi,
Please check these. It will solve your problem.
https://websmp206.sap-ag.de/~sapidb/011000358700006819072005E
https://websmp206.sap-ag.de/~sapidb/011000358700006936042005E.sim
https://websmp206.sap-ag.de/~sapidb/011000358700005011442004E
https://websmp206.sap-ag.de/~sapidb/011000358700008968942004E.sim
https://websmp206.sap-ag.de/~sapidb/011000358700001581372005E.sim
/people/federico.babelis2/blog/2006/04/23/sdcc--service-data-control-center-configuration-guide-for-dummies
Feel free to revert back.
--Ragu -
hi,
Actually we are configured SAPRouter and maintain service connection for all system in landscape.
Do we need prepare any daily system report through solution manager.
Plz suggest me
ManojYou need to configure Solution Monitoring specially System Administration you can define the task that the administrators need to execute, a responsible for each one time to so it etc, at the end you can generate a report of this.
Review following link http://help.sap.com/saphelp_nw04s/helpdata/en/cb/df8a3eacd49076e10000000a114084/frameset.htm -
Does anyone have a daily report for system status?
Basically, I am looking for an automated daily report to give me the status of jobs and workflows. I am having a hard time finding the talbes and relationships for all the jobs, workflows, and tasks in the CMDB.
Once I know where to find all the pieces, I can take it from there.Sounds like a job for OpsMgr.
- Get on the floor, do that dinosaur -
Hi,
We have SCEP on all servers 2008 R2 and 2012, now basically we are loking for specific information on
infections
Signature Updates
Errors/Failures.
Regards,
gautham.K
MCTS-Microsoft Exchange Adminstrator,2010The Antimalware activity report cover your 1 request.
The Computer Endpoint Protection status covers the other two request, it is a drill through for the other reports and it is within a hidden folder.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Hi All,
When i tried to navigate to the page http://hostname:5<no>00/smd using the user id smd_admin i cannot see the tabs diagnostics administration and root cause anaylsis.
How can we launch the same from solman_workcenter.
SAP_SMWORK* roles have been added to the user.But still the problem persists.Any pointers.Thanks.in SOlman_Work center we can see the root cause analysis tab.But we cannot see the same in smd.
SAP_ABA 701 0006 SAPKA70106 Cross-Application Component
SAP_BASIS 701 0006 SAPKB70106 SAP Basis Component
PI_BASIS 701 0006 SAPK-70106INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0002 SAPKITLRD2 SAP Solution Tools Plug-In -
Grey (blank) EWA reports generated for Portal systems
I am attempting to set up EWA reports for J2EE systems. At this stage despite all efforts I continue to get grey rated (blank) reports generated for our Portal systems.
As far as I can tell all required components are installed correctly (Wily, SMD server, SMD agents etc).
This problem seems to be restricted to our Portal systems as report data is being generated for our XI J2EE engines with the same SMD components installed.
CGA collection jobs are running successfully against the managed Portal systems, and I have attempted to manually generate reports via transaction DSA in the Solution Manager system, using an uploaded service data xml file generated with the SMD/services utility. This also results in a blank report.
Our systems comprise the following components:
Wily v7.1
SMD 13 on Solution Manager and managed systems
Solution Manager 4.0 SP13: (ABAP):
SAP_ABA 700 0013 SAPKA70013
SAP_BASIS 700 0013 SAPKB70013
ST-PI 2005_1_700 0006 SAPKITLQI6
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D
SAP_BW 700 0015 SAPKW70015
SAP_AP 700 0009 SAPKNA7009
BBPCRM 500 0009 SAPKU50009
CPRXRPM 400 0010 SAPK-40010INCPRXRPM
ST 400 0013 SAPKITL423
BI_CONT 703 0008 SAPKIBIIP8
ST-A/PI 01K_CRM560 0000 -
ST-ICO 150_700 0011 SAPK-1507BINSTPL
ST-SER 700_2006_2 0004 SAPKITLOK4
Solution Manager (J2EE):
sap.com SAP_JTECHF 7.00 SP13 (1000.7.00.13.0.20070812015644)
sap.com ISAGENT 7.00 SP13 (1000.7.00.14.0.20070927052333)
sap.com SAP-JEE 7.00 SP13 (1000.7.00.13.0.20070812015311)
sap.com SAP-JEECOR 7.00 SP13 (1000.7.00.13.0.20070907082334)
sap.com BASETABLES 7.00 SP13 (1000.7.00.13.0.20070812013638)
sap.com CORE-TOOLS 7.00 SP13 (1000.7.00.13.0.20070812014121)
sap.com JLOGVIEW 7.00 SP13 (1000.7.00.13.0.20070812001600)
sap.com JSPM 7.00 SP13 (1000.7.00.13.0.20070812001700)
sap.com CAF 7.00 SP13 (1000.7.00.13.0.20070809092315)
sap.com UMEADMIN 7.00 SP13 (1000.7.00.13.0.20070809093947)
sap.com ADSSAP 7.00 SP13 (1000.7.00.13.0.20070812011854)
sap.com BI_MMR 7.00 SP13 (1000.7.00.13.0.20070812013749)
sap.com CAF-UM 7.00 SP13 (1000.7.00.13.0.20070809092324)
sap.com KM-KW_JIKS 7.00 SP13 (1000.7.00.13.0.20070812014519)
sap.com SAP_JTECHS 7.00 SP13 (1000.7.00.13.0.20070812015951)
sap.com BI_UDI 7.00 SP13 (1000.7.00.13.0.20070811190400)
sap.com LM-SERVICE 7.00 SP13 (1000.7.00.13.0.20070812001200)
sap.com LM-TOOLS 7.00 SP13 (1000.7.00.13.0.20070906104634)
Among many, many others, the following notes and documentation has been followed:
976054 Availability of EWA for Non ABAP components
1010428 End-to-End Diagnostics
762969 - Grey rating for Earywatch Report
EWA guide for NON-ABAB components
SAP Solution Manager 4.0 End-to-End Root Cause Analysis Installation Guide
762969 - Grey rating for Earywatch Report
And of course all the Wily & SMD installation guides.
Please let me know if there is any other information required. I'm posting this in the hopes that someone else has had this problem and has been able to resolve it. I have read though what seems like hundreds of threads on SMD setup problems, however not many that describe the problem I'm having exactly.
Many thanks in advace.
TimHi Stephan,
You're on the right track! When I try manually generate reports for our XI systems via uploaded service data, I only get valid report data if I generate report with graphics - otherwise the report is blank.
Alas with the Portal systems, I get no report data either way.
The XML storage table does contain data (with XI & Portal systems) - so comms with the J2EE is working.
Thanks for your help.
Tim -
EWA Generating for EHP4 Systems
Hi,
I had generated EWA Reports successfully for ECC6.0,ECC5.0 Systems.
Now iam configuraing EWA Report for EHP4-SP04 sytems,i did all the settings in solution manager,when iam ruiing RTCCTOOL in satelite System iam getting below warning.Is this creating any problem to generate report.
Setup of the EarlyWatch Alert service
[ checks that min. 2 EWAlert sessions to SAP Solution Manager or to SAP
are found in last 60 days, and that SDCC session manager job runs ]
We recommend that SAP Solution Manager be used to monitor your systems
via Earlywatch Alert. In this case you activate it just by including
a system into a Solution Landscape. See the note 1257308 . If this is
not possible, data for productive systems can be processed at SAP.
In SDCCN when iam creating maintenace package,refresh sessions after finishing successfully disappearing from screen,not generating any early watch alerts.Guide me for the same.
Thanku,Okay. Hmmm...
Than I would query the EarlyWatch of the Satelite System over the Solman.
Logon to your Solman.
Navigate to the Solution in which the Satelite System was created.
Operations -> Solution Monitoring -> Early Watch Alert
Scroll down to the next Early Watch for your system in the future and click on it.
Change the Date of the Early Watch to the current day and time and run the suggested Job in the Solution Manager.
After the job is finished (control it via SM37), there should be a Early Watch Task in SDCCN of the Satelite System.
Best Regards
Tobias
Maybe you are looking for
-
Nouveau works perfect on chakra but not on archlinux
Hello, I have a NVIDIA GeForce 7025 / nForce 630a. I installed the nouveau drivers and the system works well. At least glxgears works. Anyway, the game minecraft crashes and a couple of days ago this same version of the game in chakra linux with nouv
-
Previewing 5D Mark II RAW files in CS4 Bridge
I have just updated to the 5.7 version of RAW for my CS4, but I still can't preview them in Bridge. Any suggestions or remedies? Please HELP!!
-
Problem: Low resolution on websites
How can I change the resolution of images in some websites?
-
Error in BDOC while uploading the pricing condition record to ECC from CRM
Hi all, I have created a condition record for ECC pricing condition type (I have maintained all settings required for maintaining ECC condition type in CRM 7.0) in CRM 7.0. But theis condition record is not uploaded to ECC. I have checked BDOC, it is
-
Smart collection drop down does not include keywords
I must have gotten this right once, because I have a smart collection whose only condition is a keyword, which is at the top of the drop down for that collection. Likewise there is a default smart collection that LR must have created, which is calle