2 external Monitor setup

Hello all.
Is it possible to have (2) Apple Cinema monitors connected to the latest MacBook Pro at the same time using the new mini connection?
-TIA

As you know, with multiple monitors, most gains in productivity result in using apps that allow you to have multiple windows open, so you can drag specific windows to different monitors. Logic, for example, does this nicely.
While you can use MainStage with two monitors, MainStage doesn't do much with multiple windows (other than those little keyboard windows, or channel strip plug-in/virtual instrument windows), and you can only have a single layout, setup, or perform window open at one time, so your choices are limited. It would be nice to be able to do a separate window for, say, lyrics, or separate keyboards, etc.

Similar Messages

  • External Monitor Setup Help

    I was wondering if anyone knew a way that I could connect my laptop to another monitor, and then connect the laptop to my Macbook Pro, and use both the laptop's monitor, and the monitor it's connected to, as external monitors. I was also thinking I could possibly throw in my 2nd Gen iPod Touch and my iPad as even more visual space. This would be an amazing setup and a huge accomplishment for me, and I could amaze everyone I know when they come over. Just in case it's useful, the Macbook Pro is a (I think it's refurbished) 2007 version. If anyone needs more info about ANYTHING, I will gladly provide it.

    Never mind. I posted this on another website and got a little bit of help from there, but I did most of it on my own. I'm using ScreenRecycler trial version (NEVER BUY IT, THERES NO POINT) to connect to my Macbook Pro to my laptop, iPad, or iPod touch, whichever I choose. I can only do one at a time and I didn't have to spend any money at all! I can also connect my laptop to my monitor or TV and add another screen into the play! The only downside is that the TV stays as Windows while the laptop is connected with my Mac, unless I drag the window to the TV and then the laptop stays as windows. It's almost like having 2 Macs and 1 PC! Thanks to anyone who even considered helping me.
    arecusrulz

  • [openbox] External monitor setup

    Hi guys,
    I'm curious to know how you handle a second monitor. Coming from Gnome I was used to have some more comfort with that.
    How it should be
    1. I plug in the monitor and nothing happens automatically. Can this be done automatically?
    2. Anyway, not a problem, I can use arandr to activate the external monitor. But how can I for example map the second desktop of openbox to that screen? That is, the first desktop should be mapped to my laptop screen, the second to the external monitor.
    3. When I plug off the external monitor all previous settings should be restored, showing all my windows on only my laptop screen.
    Regards

    orschiro wrote:1. The list of windows opened through ALT+TAB is only visible on the second screen. However I want it to have on my laptop screen.
    You should be able to fix this with the "<monitor>" option in the "<placement>" section. If you want the ALT+TAB dialog on the active screen, use "<monitor>Active</monitor>". If you always want it on one particular screen, try a specific number. (If "<monitor>1</monitor>" does not work, try "<monitor>2</monitor>".)
    orschiro wrote:2. I'm using adeskbar as a panel bar. Does anyone know how to restrict the size of the bar only to the left/laptop screen?
    I'm not familiar with adeskbar, but it is certainly possible that adeskbar does not support multi-head setups.
    orschiro wrote:3. Viewing flash video in fullscreen over the second monitor does not cover the whole screen but only the resolution of my native screen (1280x800 px). How can I run flash files in fullscreen (it's a monitor with ~1600 x... px) over the second screen?
    I found this and this.
    Otherwise, I get this problem too. It seems like some people believe it's a problem with the player or flash itself rather than the window manager. (Think about it---the window manager isn't going to choose the resolution at which flash displays video.) I've simply resigned to live with it and watch full screen flash on the monitor that it shows correctly on.
    Also, since you're using Openbox with multiple monitors, check out Openbox Multihead.

  • Dual external monitor setup?

    I'd like to use dual external monitors, ideally also plus the laptop screen for a total of 3 monitors, with my new 5th gen 17" MBP. I hear that USB-to-DVI options out there due have very poor poor refresh rates and picture quality. I'd like to use the ViDock2 expresscard/34 setup, which is a full fledged external video card, http://www.villagetronic.com/vidock2/index.html, but I understand it only works with MBP gens 1-4. Anybody know any other multi-monitor solutions that work with gen 5, other than poor quality USB options? Anybody know why the ViDock2 doesn't work with the MBP 5th gen?

    Check out the Matrox dual head and triple head units, marc.
    http://www.matrox.com/graphics/en/products/gxm/
    My suspicion is that you will need the more expensive "DP" versions to operate effectively with the new model.
    Cheers
    Rod

  • T43 w/ Port Rep II - Dual External Monitor Setup

    Hi,
    I have a T43 with the ATI chipset.  I am running it in a dual monitor configuration with the laptop LCD and an external monitor connected to the docking station.  I would like to use 2 external monitors via the docking station's VGA and DVI connectors but I can't figure out how to get the system to switch from the laptop LCD to the DVI.  Is this possible?  If so, how do I do it?
    I'm running XP.
    Much thanks for any help!
    Fred
    Solved!
    Go to Solution.

    go into your bios, select vga+dvi+internal screen. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Would this external monitor setup work?

    I have purchased this (http://www.ebuyer.com/product/152744) 23 inch samsung with a resolution of 2048x1152 and am waiting for it to arrive.
    Will it work using the mini display port to DVI adapter at that resolution? Or will i have to purchase that stupid dual link (i hope not >.<)
    Any ideas or help will be appreciated, thanks.

    Thankyou mate
    Also, do you have any idea how it would look at 1920x1080?
    Because i know that resolution looks good at 23" anyway, (think of the 23 inch ACD) but reckon itd look okay because its not the native res?
    Many thanks for your previous answer.

  • External NTSC monitor setup

    When I use an external NTSC monitor connected to an Apple DVI to video adaptor then to a Radeon 800XT video card I have many crashes. It seems like these are caused by the External monitor setup. I would to know what sort step up others are using for external video. And what kind of success you are having with them.
    Thanks
    Ken

    I to have had the same problem, in fact, I just posted about it a few days ago. Hopefully Apple's monitoring this forum and looking at the issue. The only solution I've found is to disable the external preview, which is quite frustrating. Just a question have your crashed happened while you're working or when you perform application switching. I've only had problems when I apple-tab to another program and then do the same to get back into Motion.

  • Accessibility zoom unusable on multi-monitor setup

    The accessibility zoom feature (ctrl-scoll when enabled) that always worked so well and fluidily in previous versions of OSX is now broken in Yosemite.
    It works fine on my macbook pro retina's main display when there are no monitor connected, but on my usual dual external monitor setup the frame rate is so slow it makes is useless.
    Does anyone have the same issue?

    I just found a great workaround for the zoom and it works better than before.
    The zoom defaults to fullscreen zoom and when you have multiple monitors it zooms all of them. Normally I don't need to zoom all just the one monitor that I'm working on.
    Go to  "system preferences " ,"accessibility ", set zoom style to "picture in picture" and then click   "more options"  and then click "adjust size and location"  then you can set the zoom window to the size of a monitor. then when you zoom only the monitor you are on gets zoomed and is fast.
    Works for me. Hopefully helps others as well.

  • How to setup external monitor?

    I know it's been asked numerous times before, but I can't find the solution I'm looking for.
    I'm running a dual 2.0 powermac g5, with dual 20" monitors for editing, and I'd like to hook up an external televison that ONLY shows the canvas in FCP 5.
    Here's the catch: I don't want to have to go through a camera to do this.
    There has to be an easy solution here... when I was in college, they had it setup that way, but they were on PC's and Premiere. Is going through a camera or a dv to analog converter box the ONLY way to do this?? How could it be so easy on a PC, and difficult on a mac. That just doesn't make sense.
    I'm sick of doing color correction, then having to burn to dvd, then going to watch it on the big screen just to see that the colors are totally different, and starting the whole process over again till I get it right.
    thanks -brown

    I pretty sure that the PC's at school DID NOT go through a converter box, and I'm positive they didn't go through a camera. If I remember correctly, it was just an audio/video cable that came directly out of the computer, and directly into the external monitor. Then it was as simple as setting it up in Adobe Premiere to just show the "canvas".
    I just don't see why mac would make it difficult. Seems to me that it should be a top priority for them to make it as simple as connecting a cable. Doesn't every editor want an external ntsc/pal monitor to view thier stuff?? and doesn't apple get a lot of thier sales from post production people??
    I don't get it. Oh well... I guess I'll put some money aside for the converter box.
    Any other ideas still welcome. I read a post in hear about the "screen spanning doctor" and I think someone said they got it to work that way... but it wasn't perfect.
    -brown

  • MBP retina setup 3 external monitors?

    I've read a lot of places that people have been able to get 3 external monitors working though the two minidisplay ports and the one HDMI.
    I have a 30" monitor 2560x1600 that I want to power from one of the display ports and two 24" 1920x1080 monitors that I'm trying to power by the display port and HDMI.
    When ever I plug the HDMI port in the second display port seems to get disconnected.
    Has anyone figured out a way to "trick" or configure the system so it will power the two displayports and the HDMI at the same time?

    Doing some more digging it seems like this is an issue with 10.9.3 and 10.9.4 (currently on). I hope they get it fixed, as reports have said that windows drivers when running bootcamp work fine with powering 3 external displays.
    http://9to5mac.com/2014/05/26/os-x-10-9-3-causing-more-headaches-for-mac-pro-use rs-external-monitors-getting-disabled/

  • X11 on a single screen in a dual monitor setup

    Same problem as posed here: http://discussions.info.apple.com/message.jspa?messageID=2260647&tstart=0
    I was excited when I read the following:
    I fiddled with Apple's X11, which I'd installed on my Desktop, to no avail. Nowhere could I disable the screen-spanning behavior. On a hunch, I decided to try out XDarwin, however, and lo and behold --- a checkbox for enabling/disabling Xinerama! In addition, XDarwin seems to be better behaved than Apple's X11 when it comes to correctly sourcing some of my $HOME/.X* configuration files (e.g., I always had to run xmodmap ~/.Xmodmap manually under X11, even after putting the command in my .xinitrc).
    I only ever use Xquartz(currently XQuartz 2.6.0 (xorg-server 1.9.3)) which is Xdarwin now. But I do not see the mentioned checkbox for enabling/disabling Xinerama.
    Which sounds exactly like what I want to do. I want to have my macbook air(mba) to display full screen Xquartz on external 27" Dell monitor only. On the macbook screen I want to show the OSX desktop with open applications not blacked out by X11.
    Any pointers to this checkbox's location would be great. Or any other way to configure this setup would also be good.
    I'm not looking for solutions that keep the laptop monitor off in any way as I have seen suggested many times. This is because I want to use it to view state of other OS X apps on the macbook screen while working in full screen X session on the external monitor.
    The xnest solution sounds inferior for the same reasons pointed out by Michael C. Lee in the post I mentioned above.

    Hi Andy,
    I really appreciate your help!
    I believe you're correct in that I wouldn't be able to start the X server and have it only produce output on one of my monitors, as they are necessarily part of a single "display" (in OS X, at least). Barring that, however, I wanted to be able to at least keep X11 from creating a single screen that spanned both my monitors (the problem with this is that it doesn't recognize the separate monitor geometries, so large chunks of the virtual spanning screen were inaccessible, and it also made dealing with X apps that are none dual-head friendly a pain). On my linux machine, I was able to get this behavior by default (i.e., separate screens named '.0 and .1' under a single X display), and could get monitor spanning only after enabling the Xinerama extension.
    I fiddled with Apple's X11, which I'd installed on my Desktop, to no avail. Nowhere could I disable the screen-spanning behavior. On a hunch, I decided to try out XDarwin, however, and lo and behold --- a checkbox for enabling/disabling Xinerama! In addition, XDarwin seems to be better behaved than Apple's X11 when it comes to correctly sourcing some of my $HOME/.X* configuration files (e.g., I always had to run xmodmap ~/.Xmodmap manually under X11, even after putting the command in my .xinitrc).
    Anyway, that basically gave me what I needed, so I'm a happy camper. Just thought I'd post this in the unlikely event that someone else is in the same situation. Oh, and if you're curious, the reason I needed to do this in the first place was because I wanted to run the ratpoison windows manager fullscreen --- great for dealing with ADD!

  • HP Zbook 15, external monitor connected to docking station issue

    Dear all
    I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station. 
    After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
    "If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
    Best regards,
    Murtaza
    I did not find a way to attach the log file, so I put it here:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
    [ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
    [ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
    [ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
    [ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
    [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
    [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
    [ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
    [ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
    [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
    [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
    [ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
    [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
    [ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
    [ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x449fffff] page 2M
    [ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
    [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
    [ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
    [ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
    [ 0.000000] ACPI: FACS 0000000045e31000 000040
    [ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
    [ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
    [ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
    [ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
    [ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
    [ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
    [ 0.000000] On node 0 totalpages: 4143388
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 4334 pages used for memmap
    [ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
    [ 0.000000] Normal zone: 60344 pages used for memmap
    [ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
    [ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
    [ 0.000000] Offload RCU callbacks from all CPUs
    [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
    [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 66584576 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.008000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.008000] tsc: Detected 2693.754 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000024] Security Framework initialized
    [ 0.000038] AppArmor: AppArmor initialized
    [ 0.000039] Yama: becoming mindful.
    [ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004573] Initializing cgroup subsys memory
    [ 0.004578] Initializing cgroup subsys devices
    [ 0.004579] Initializing cgroup subsys freezer
    [ 0.004581] Initializing cgroup subsys blkio
    [ 0.004582] Initializing cgroup subsys perf_event
    [ 0.004584] Initializing cgroup subsys hugetlb
    [ 0.004602] CPU: Physical Processor ID: 0
    [ 0.004603] CPU: Processor Core ID: 0
    [ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.005456] mce: CPU supports 9 MCE banks
    [ 0.005469] CPU0: Thermal monitoring enabled (TM1)
    [ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    [ 0.005479] tlb_flushall_shift: 6
    [ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
    [ 0.006826] ACPI: Core revision 20131115
    [ 0.015427] ACPI: All ACPI Tables successfully acquired
    [ 0.015707] ftrace: allocating 31443 entries in 123 pages
    [ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.067065] TSC deadline timer enabled
    [ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067078] ... version: 3
    [ 0.067079] ... bit width: 48
    [ 0.067079] ... generic registers: 4
    [ 0.067080] ... value mask: 0000ffffffffffff
    [ 0.067081] ... max period: 0000ffffffffffff
    [ 0.067082] ... fixed-purpose events: 3
    [ 0.067082] ... event mask: 000000070000000f
    [ 0.068367] x86: Booting SMP configuration:
    [ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.166721] x86: Booted up 1 node, 8 CPUs
    [ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
    [ 0.174163] devtmpfs: initialized
    [ 0.177951] EVM: security.selinux
    [ 0.177953] EVM: security.SMACK64
    [ 0.177953] EVM: security.ima
    [ 0.177954] EVM: security.capability
    [ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
    [ 0.178592] pinctrl core: initialized pinctrl subsystem
    [ 0.178637] regulator-dummy: no parameters
    [ 0.178663] RTC time: 20:49:45, date: 04/17/15
    [ 0.178689] NET: Registered protocol family 16
    [ 0.178764] cpuidle: using governor ladder
    [ 0.178766] cpuidle: using governor menu
    [ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.178796] ACPI: bus type PCI registered
    [ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.194702] PCI: Using configuration type 1 for base access
    [ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.194963] mtrr: corrected configuration.
    [ 0.195520] bio: create slab <bio-0> at 0
    [ 0.195643] ACPI: Added _OSI(Module Device)
    [ 0.195645] ACPI: Added _OSI(Processor Device)
    [ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.246512] ACPI: Dynamic OEM Table Load:
    [ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.250664] ACPI: Dynamic OEM Table Load:
    [ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 0.254498] ACPI: Dynamic OEM Table Load:
    [ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 2.268291] ACPI: Interpreter enabled
    [ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 2.268314] ACPI: (supports S0 S3 S4 S5)
    [ 2.268315] ACPI: Using IOAPIC for interrupt routing
    [ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.268475] ACPI: No dock devices found.
    [ 2.270541] ACPI: Power Resource [APPR] (off)
    [ 2.287340] ACPI: Power Resource [COMP] (on)
    [ 2.287629] ACPI: Power Resource [LPP] (on)
    [ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 2.298295] PCI host bridge to bus 0000:00
    [ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
    [ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    [ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    [ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
    [ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
    [ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
    [ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
    [ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
    [ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
    [ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
    [ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
    [ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
    [ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
    [ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
    [ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
    [ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
    [ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
    [ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
    [ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
    [ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
    [ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
    [ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
    [ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
    [ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
    [ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
    [ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
    [ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
    [ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.306776] acpiphp: Slot [1] registered
    [ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.306850] acpiphp: Slot [1-1] registered
    [ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
    [ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
    [ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
    [ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
    [ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
    [ 2.315269] pci 0000:5d:00.0: supports D1 D2
    [ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
    [ 2.324298] Found 1 acpi root devices
    [ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 2.324522] vgaarb: loaded
    [ 2.324523] vgaarb: bridge control possible 0000:01:00.0
    [ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
    [ 2.324635] SCSI subsystem initialized
    [ 2.324664] libata version 3.00 loaded.
    [ 2.324678] ACPI: bus type USB registered
    [ 2.324688] usbcore: registered new interface driver usbfs
    [ 2.324693] usbcore: registered new interface driver hub
    [ 2.324707] usbcore: registered new device driver usb
    [ 2.324786] PCI: Using ACPI for IRQ routing
    [ 2.330294] PCI: pci_cache_line_size set to 64 bytes
    [ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
    [ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
    [ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
    [ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
    [ 2.330402] NetLabel: Initializing
    [ 2.330403] NetLabel: domain hash size = 128
    [ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
    [ 2.330412] NetLabel: unlabeled traffic allowed by default
    [ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 2.332489] Switched to clocksource hpet
    [ 2.335878] AppArmor: AppArmor Filesystem Enabled
    [ 2.335891] pnp: PnP ACPI init
    [ 2.335898] ACPI: bus type PNP registered
    [ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
    [ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336141] pnp 00:01: [dma 4]
    [ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
    [ 2.336353] system 00:06: [io 0xffff] has been reserved
    [ 2.336354] system 00:06: [io 0xffff] has been reserved
    [ 2.336355] system 00:06: [io 0xffff] has been reserved
    [ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
    [ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
    [ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
    [ 2.336939] pnp 00:0a: [dma 0 disabled]
    [ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
    [ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
    [ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
    [ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
    [ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 2.337398] pnp: PnP ACPI: found 15 devices
    [ 2.337399] ACPI: bus type PNP unregistered
    [ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
    [ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
    [ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
    [ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
    [ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
    [ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
    [ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
    [ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
    [ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
    [ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
    [ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
    [ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
    [ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
    [ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
    [ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
    [ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343341] NET: Registered protocol family 2
    [ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
    [ 2.343782] TCP: reno registered
    [ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343907] NET: Registered protocol family 1
    [ 2.343916] pci 0000:00:02.0: Boot video device
    [ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
    [ 2.344387] PCI: CLS 64 bytes, default 64
    [ 2.344426] Trying to unpack rootfs image as initramfs...
    [ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
    [ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
    [ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.581892] Scanning for low memory corruption every 60 seconds
    [ 2.582096] Initialise system trusted keyring
    [ 2.582129] audit: initializing netlink socket (disabled)
    [ 2.582137] type=2000 audit(1429303787.580:1): initialized
    [ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.606581] zbud: loaded
    [ 2.606685] VFS: Disk quotas dquot_6.5.2
    [ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.606997] fuse init (API version 7.22)
    [ 2.607048] msgmni has been set to 31698
    [ 2.607084] Key type big_key registered
    [ 2.607458] Key type asymmetric registered
    [ 2.607459] Asymmetric key parser 'x509' registered
    [ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.607514] io scheduler noop registered
    [ 2.607516] io scheduler deadline registered (default)
    [ 2.607531] io scheduler cfq registered
    [ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.608123] vesafb: scrolling: redraw
    [ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
    [ 2.763515] Console: switching to colour frame buffer device 240x67
    [ 2.917758] fb0: VESA VGA frame buffer device
    [ 2.917770] intel_idle: MWAIT substates: 0x42120
    [ 2.917771] intel_idle: v0.4 model 0x3C
    [ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.917911] ipmi message handler version 39.2
    [ 2.918057] ACPI: AC Adapter [AC] (on-line)
    [ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 2.918201] ACPI: Sleep Button [SLPB]
    [ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.918238] ACPI: Lid Switch [LID]
    [ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 2.918261] ACPI: Power Button [PWRF]
    [ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
    [ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957440] ACPI: Invalid passive threshold
    [ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
    [ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
    [ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
    [ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
    [ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
    [ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003360] ACPI: Invalid passive threshold
    [ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
    [ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
    [ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
    [ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
    [ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
    [ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
    [ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
    [ 3.013706] GHES: HEST is not enabled!
    [ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 3.056055] Linux agpgart interface v0.103
    [ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
    [ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
    [ 3.353165] brd: module loaded
    [ 3.353594] loop: module loaded
    [ 3.353831] libphy: Fixed MDIO Bus: probed
    [ 3.353886] tun: Universal TUN/TAP device driver, 1.6
    [ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 3.353914] PPP generic driver version 2.4.2
    [ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.353946] ehci-pci: EHCI PCI platform driver
    [ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
    [ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
    [ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.368161] usb usb1: Product: EHCI Host Controller
    [ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
    [ 3.368233] hub 1-0:1.0: USB hub found
    [ 3.368238] hub 1-0:1.0: 3 ports detected
    [ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
    [ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
    [ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384149] usb usb2: Product: EHCI Host Controller
    [ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
    [ 3.384234] hub 2-0:1.0: USB hub found
    [ 3.384238] hub 2-0:1.0: 3 ports detected
    [ 3.384329] ehci-platform: EHCI generic platform driver
    [ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 3.384336] ohci-pci: OHCI PCI platform driver
    [ 3.384342] ohci-platform: OHCI generic platform driver
    [ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
    [ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384590] usb usb3: Product: xHCI Host Controller
    [ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
    [ 3.384673] hub 3-0:1.0: USB hub found
    [ 3.384690] hub 3-0:1.0: 15 ports detected
    [ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.385471] usb usb4: Product: xHCI Host Controller
    [ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
    [ 3.385551] hub 4-0:1.0: USB hub found
    [ 3.385562] hub 4-0:1.0: 6 ports detected
    [ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
    [ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
    [ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 3.394254] mousedev: PS/2 mouse device common for all mice
    [ 3.394420] rtc_cmos 00:08: RTC can wake from S4
    [ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 3.394608] device-mapper: uevent: version 1.0.3
    [ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
    [ 3.394743] TCP: cubic registered
    [ 3.394800] NET: Registered protocol family 10
    [ 3.394914] NET: Registered protocol family 17
    [ 3.394922] Key type dns_resolver registered
    [ 3.395160] Loading compiled-in X.509 certificates
    [ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
    [ 3.395800] registered taskstats version 1
    [ 3.397885] Key type trusted registered
    [ 3.399811] Key type encrypted registered
    [ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
    [ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
    [ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
    [ 3.460705] regulator-dummy: disabling
    [ 3.460903] Magic number: 11:175:852
    [ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
    [ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 3.462219] EDD information not available.
    [ 3.462247] PM: Hibernation image not present or could not be loaded.
    [ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
    [ 3.463165] Write protecting the kernel read-only data&colon; 12288k
    [ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
    [ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
    [ 3.478948] udevd[143]: starting version 175
    [ 3.509828] pps_core: LinuxPPS API ver. 1 registered
    [ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.511322] PTP clock support registered
    [ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
    [ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
    [ 3.513783] ahci 0000:00:1f.2: version 3.0
    [ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
    [ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.528600] scsi0 : ahci
    [ 3.528832] scsi1 : ahci
    [ 3.528908] scsi2 : ahci
    [ 3.528979] scsi3 : ahci
    [ 3.529074] scsi4 : ahci
    [ 3.529152] scsi5 : ahci
    [ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
    [ 3.529186] ata2: DUMMY
    [ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
    [ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
    [ 3.529192] ata5: DUMMY
    [ 3.529193] ata6: DUMMY
    [ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
    [ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
    [ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [ 3.612547] usb 4-1: Product: USB5534
    [ 3.612548] usb 4-1: Manufacturer: SMSC
    [ 3.612549] usb 4-1: SerialNumber: 1239567
    [ 3.614189] hub 4-1:1.0: USB hub found
    [ 3.614228] hub 4-1:1.0: 4 ports detected
    [ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
    [ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
    [ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
    [ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 3.849416] ata1.00: configured for UDMA/100
    [ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
    [ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
    [ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 3.856471] hub 1-1:1.0: USB hub found
    [ 3.856575] hub 1-1:1.0: 6 ports detected
    [ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
    [ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.100529] hub 2-1:1.0: USB hub found
    [ 4.100626] hub 2-1:1.0: 8 ports detected
    [ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
    [ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
    [ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
    [ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.284596] hub 3-1:1.0: USB hub found
    [ 4.284626] hub 3-1:1.0: 4 ports detected
    [ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
    [ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
    [ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
    [ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
    [ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
    [ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    [ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
    [ 4.579770] Switched to clocksource tsc
    [ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
    [ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
    [ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
    [ 4.702997] EXT4-fs (sda5): recovery complete
    [ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
    [ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 4.736090] usb 3-7: Product: HP HD Webcam
    [ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
    [ 4.777998] random: init urandom read with 97 bits of entropy available
    [ 4.815946] init: ureadahead main process (382) terminated with status 5
    [ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
    [ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    [ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4.915232] udevd[465]: starting version 175
    [ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
    [ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
    [ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
    [ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
    [ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
    [ 4.941014] lp: driver loaded but no devices found
    [ 4.969070] Initializing HPQ6001 module
    [ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
    [ 4.977289] wmi: Mapper loaded
    [ 4.985916] [drm] Initialized drm 1.1.0 20060810
    [ 4.991703] hp_accel: laptop model unknown, using default axes configuration
    [ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 5.013849] [drm] Memory usable by graphics device = 2048M
    [ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
    [ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 5.013874] Console: switching to colour dummy device 80x25
    [ 5.030434] random: nonblocking pool is initialized
    [ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.036770] ppdev: user-space parallel port driver
    [ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 5.039280] Copyright(c) 2003-2013 Intel Corporation
    [ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
    [ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
    [ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.049977] Bluetooth: Core ver 2.17
    [ 5.049990] NET: Registered protocol family 31
    [ 5.049991] Bluetooth: HCI device and connection manager initialized
    [ 5.049998] Bluetooth: HCI socket layer initialized
    [ 5.050001] Bluetooth: L2CAP socket layer initialized
    [ 5.050005] Bluetooth: SCO socket layer initialized
    [ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 5.057904] Bluetooth: RFCOMM TTY layer initialized
    [ 5.057915] Bluetooth: RFCOMM socket layer initialized
    [ 5.057920] Bluetooth: RFCOMM ver 1.11
    [ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 5.061074] Bluetooth: BNEP filters: protocol multicast
    [ 5.061082] Bluetooth: BNEP socket layer initialized
    [ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 5.063658] [drm] Driver supports precise vblank timestamp query.
    [ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
    [ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
    [ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
    [ 5.107863] lp0: using parport0 (interrupt-driven).
    [ 5.117196] MXM: GUID detected in BIOS
    [ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
    [ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.136368] usbcore: registered new interface driver btusb
    [ 5.139414] init: failsafe main process (863) killed by TERM signal
    [ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
    [ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
    [ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
    [ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.232078] hub 3-1.2:1.0: USB hub found
    [ 5.232107] hub 3-1.2:1.0: 2 ports detected
    [ 5.245239] Linux video capture interface: v2.00
    [ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
    [ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
    [ 5.258213] usbcore: registered new interface driver uvcvideo
    [ 5.258215] USB Video Class driver (1.1.1)
    [ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
    [ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.372070] lis3lv02d: 8 bits 3DC sensor found
    [ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.385320] fbcon: inteldrmfb (fb0) is primary device
    [ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
    [ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
    [ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
    [ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
    [ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
    [ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
    [ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
    [ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
    [ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
    [ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.672470] usbcore: registered new interface driver usbhid
    [ 5.672471] usbhid: USB HID core driver
    [ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
    [ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
    [ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
    [ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
    [ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
    [ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
    [ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
    [ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
    [ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 6.950914] Console: switching to colour frame buffer device 240x67
    [ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 6.954405] i915 0000:00:02.0: registered panic notifier
    [ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
    [ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
    [ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
    [ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
    [ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.960166] ACPI: If an ACPI driver is

    @emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
    Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
    I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
    That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
    Thanks for the input and links.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • Libreoffice crashes after plug in external monitor

    Hi
    I have XFCE. When i plug in external monitor i get a crash from libreoffice. The message says that libreoffice has crashed and that documents will be saved. Has anybody got simillar issues?
    LibreOffice error message:
    Due to an unexpected errot, LibreOffice vrashed. All the files you were working on will be saved now. The next time LibreOffice is launched, your files will be recovered automatically.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
    [ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd80000 (usable)
    [ 0.000000] BIOS-e820: 000000007dd80000 - 000000007dd8f000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dd8f000 - 000000007dde0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007dde0000 - 000000007de00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 209 07/10/2009
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7dd80 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
    [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 7db5b000 - 7dd70000
    [ 0.000000] Allocated new RAMDISK: 375e9000 - 377fd327
    [ 0.000000] Move RAMDISK from 000000007db5b000 - 000000007dd6f326 to 375e9000 - 377fd326
    [ 0.000000] ACPI: RSDP 000f93d0 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 7dd80100 00084 (v01 071009 XSDT1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: FACP 7dd80290 000F4 (v03 071009 FACP1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 7dd80680 0CD1D (v01 K50IJ K50IJ209 00000209 INTL 20051117)
    [ 0.000000] ACPI: FACS 7dd8f000 00040
    [ 0.000000] ACPI: APIC 7dd80390 0005C (v01 071009 APIC1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 7dd80430 0003C (v01 071009 OEMMCFG 20090710 MSFT 00000097)
    [ 0.000000] ACPI: OEMX 7dd80470 00176 (v01 071009 OEMX1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: ECDT 7dd80620 00054 (v01 071009 OEMECDT 20090710 MSFT 00000097)
    [ 0.000000] ACPI: DBGP 7dd803f0 00034 (v01 071009 DBGP1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: BOOT 7dd805f0 00028 (v01 071009 BOOT1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 7dd8f040 00071 (v01 071009 OEMB1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: HPET 7dd8d3a0 00038 (v01 071009 OEMHPET 20090710 MSFT 00000097)
    [ 0.000000] ACPI: GSCI 7dd8f0c0 02024 (v01 071009 GMCHSCI 20090710 MSFT 00000097)
    [ 0.000000] ACPI: ATKG 7dd912f0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 7dd99b20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMI detected: ASUS K50IJ
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1125MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007dd80
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x00000097
    [ 0.000000] 0: 0x00000100 -> 0x0007dd80
    [ 0.000000] On node 0 totalpages: 515335
    [ 0.000000] free_area_init_node: node 0, pgdat c05add00, node_mem_map f6628200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3943 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2252 pages used for memmap
    [ 0.000000] HighMem zone: 285878 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
    [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
    [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 7de00000 (gap: 7de00000:80f20000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
    [ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511307
    [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8247040 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dd80)
    [ 0.000000] Memory: 2027804k/2061824k available (3414k kernel code, 33536k reserved, 1408k data, 500k init, 1152520k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB)
    [ 0.000000] .data : 0xc04559d5 - 0xc05b5a00 (1408 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04559d5 (3414 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1795.332 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.27 BogoMIPS (lpj=5984440)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003394] Security Framework initialized
    [ 0.003400] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003424] Mount-cache hash table entries: 512
    [ 0.003645] Initializing cgroup subsys cpuacct
    [ 0.003661] Initializing cgroup subsys memory
    [ 0.003672] Initializing cgroup subsys devices
    [ 0.003674] Initializing cgroup subsys freezer
    [ 0.003677] Initializing cgroup subsys net_cls
    [ 0.003679] Initializing cgroup subsys blkio
    [ 0.003723] CPU: Physical Processor ID: 0
    [ 0.003725] CPU: Processor Core ID: 0
    [ 0.003728] mce: CPU supports 6 MCE banks
    [ 0.003736] CPU0: Thermal monitoring handled by SMI
    [ 0.003740] using mwait in idle threads.
    [ 0.006852] ACPI: Core revision 20110413
    [ 0.016682] ftrace: allocating 15362 entries in 31 pages
    [ 0.020055] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054743] CPU0: Intel Celeron(R) Dual-Core CPU T3000 @ 1.80GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073448] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100011] CPU 1 irqstacks, hard=f54e8000 soft=f54ea000
    [ 0.100014] Booting Node 0, Processors #1 Ok.
    [ 0.100017] smpboot cpu 1: start_ip = 93000
    [ 0.006666] Initializing CPU#1
    [ 0.006666] CPU1: Thermal monitoring handled by SMI
    [ 0.196686] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203328] Total of 2 processors activated (7184.88 BogoMIPS).
    [ 0.204206] devtmpfs: initialized
    [ 0.204206] PM: Registering ACPI NVS region at 7dd8f000 (331776 bytes)
    [ 0.204614] print_constraints: dummy:
    [ 0.204682] NET: Registered protocol family 16
    [ 0.204804] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204807] ACPI: bus type pci registered
    [ 0.204906] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.204910] PCI: not using MMCONFIG
    [ 0.205140] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
    [ 0.205142] PCI: Using configuration type 1 for base access
    [ 0.206964] bio: create slab <bio-0> at 0
    [ 0.206964] ACPI: Deleted _OSI(Windows 2009)
    [ 0.209160] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.209166] ACPI: EC: Look up EC in DSDT
    [ 0.218122] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.221024] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.230152] ACPI Warning: Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20110413/tbutils-314)
    [ 0.230496] ACPI: SSDT 7dd993b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.231045] ACPI: Dynamic OEM Table Load:
    [ 0.231049] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.231346] ACPI: SSDT 7dd99320 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    [ 0.231894] ACPI: Dynamic OEM Table Load:
    [ 0.231897] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    [ 0.232248] ACPI: Interpreter enabled
    [ 0.232260] ACPI: (supports S0 S3 S4 S5)
    [ 0.232287] ACPI: Using IOAPIC for interrupt routing
    [ 0.232319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.234032] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.234035] PCI: Using MMCONFIG for extended config space
    [ 0.243183] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
    [ 0.243546] ACPI: No dock devices found.
    [ 0.243548] HEST: Table not found.
    [ 0.243553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.243848] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.244065] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.244068] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.244072] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.244075] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.244078] pci_root PNP0A08:00: host bridge window [mem 0x7de00000-0xffffffff]
    [ 0.244094] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.244121] DMAR: Forcing write-buffer flush capability
    [ 0.244147] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.244164] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
    [ 0.244174] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.244181] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
    [ 0.244219] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.244232] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
    [ 0.244330] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.244399] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f]
    [ 0.244468] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
    [ 0.244535] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f]
    [ 0.244604] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
    [ 0.244672] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f]
    [ 0.244753] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.244784] pci 0000:00:1a.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
    [ 0.244890] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.244896] pci 0000:00:1a.7: PME# disabled
    [ 0.244932] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.244957] pci 0000:00:1b.0: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
    [ 0.245049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.245054] pci 0000:00:1b.0: PME# disabled
    [ 0.245086] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.245179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.245185] pci 0000:00:1c.0: PME# disabled
    [ 0.245218] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
    [ 0.245311] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.245317] pci 0000:00:1c.1: PME# disabled
    [ 0.245356] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
    [ 0.245451] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.245457] pci 0000:00:1c.5: PME# disabled
    [ 0.245494] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.245563] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
    [ 0.245634] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.245702] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
    [ 0.245771] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.245839] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
    [ 0.245920] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.245951] pci 0000:00:1d.7: reg 10: [mem 0xfe9fb800-0xfe9fbbff]
    [ 0.246056] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.246062] pci 0000:00:1d.7: PME# disabled
    [ 0.246091] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.246183] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
    [ 0.246345] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.246377] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
    [ 0.246390] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
    [ 0.246404] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
    [ 0.246417] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
    [ 0.246430] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
    [ 0.246443] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb000-0xfe9fb7ff]
    [ 0.246501] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.246506] pci 0000:00:1f.2: PME# disabled
    [ 0.246598] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.246604] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.246610] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.246619] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.246718] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 0.246751] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
    [ 0.246873] pci 0000:02:00.0: supports D1
    [ 0.246876] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 0.246883] pci 0000:02:00.0: PME# disabled
    [ 0.246929] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.246935] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.246941] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.246950] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247043] pci 0000:03:00.0: [1969:1026] type 0 class 0x000200
    [ 0.247076] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.247094] pci 0000:03:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.247203] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.247210] pci 0000:03:00.0: PME# disabled
    [ 0.247248] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.247254] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.247259] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.247268] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247370] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.247376] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.247382] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.247391] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247394] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.247397] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.247400] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.247403] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.247407] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
    [ 0.247437] pci_bus 0000:00: on NUMA node 0
    [ 0.247441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.247651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.247695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
    [ 0.247885] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.248174] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.259190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
    [ 0.259248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
    [ 0.259304] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
    [ 0.259356] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
    [ 0.259410] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
    [ 0.259462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
    [ 0.259517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
    [ 0.259572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
    [ 0.259683] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.259697] vgaarb: loaded
    [ 0.259699] vgaarb: bridge control possible 0000:00:02.0
    [ 0.259809] PCI: Using ACPI for IRQ routing
    [ 0.259812] PCI: pci_cache_line_size set to 64 bytes
    [ 0.259912] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
    [ 0.259915] reserve RAM buffer: 000000007dd80000 - 000000007fffffff
    [ 0.260058] NetLabel: Initializing
    [ 0.260060] NetLabel: domain hash size = 128
    [ 0.260062] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.260077] NetLabel: unlabeled traffic allowed by default
    [ 0.260094] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.260103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.260108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.270003] Switching to clocksource hpet
    [ 0.273239] Switched to NOHz mode on CPU #0
    [ 0.273288] Switched to NOHz mode on CPU #1
    [ 0.277882] pnp: PnP ACPI init
    [ 0.277905] ACPI: bus type pnp registered
    [ 0.278057] pnp 00:00: [bus 00-ff]
    [ 0.278061] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.278064] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.278069] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.278072] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.278075] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.278078] pnp 00:00: [mem 0x7de00000-0xffffffff window]
    [ 0.278081] pnp 00:00: [mem 0x00000000-0xffffffff window]
    [ 0.278186] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.278198] pnp 00:01: [mem 0xfed10000-0xfed19fff]
    [ 0.278259] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.278264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.278299] pnp 00:02: [dma 4]
    [ 0.278301] pnp 00:02: [io 0x0000-0x000f]
    [ 0.278304] pnp 00:02: [io 0x0081-0x0083]
    [ 0.278306] pnp 00:02: [io 0x0087]
    [ 0.278309] pnp 00:02: [io 0x0089-0x008b]
    [ 0.278311] pnp 00:02: [io 0x008f]
    [ 0.278313] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.278345] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.278357] pnp 00:03: [io 0x0070-0x0071]
    [ 0.278371] pnp 00:03: [irq 8]
    [ 0.278402] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.278441] pnp 00:04: [io 0x0060]
    [ 0.278443] pnp 00:04: [io 0x0064]
    [ 0.278449] pnp 00:04: [irq 1]
    [ 0.278483] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.278536] pnp 00:05: [irq 12]
    [ 0.278575] pnp 00:05: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.278586] pnp 00:06: [io 0x0061]
    [ 0.278618] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.278628] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.278634] pnp 00:07: [irq 13]
    [ 0.278667] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.278826] pnp 00:08: [io 0x0010-0x001f]
    [ 0.278829] pnp 00:08: [io 0x0022-0x003f]
    [ 0.278831] pnp 00:08: [io 0x0044-0x005f]
    [ 0.278833] pnp 00:08: [io 0x0063]
    [ 0.278836] pnp 00:08: [io 0x0065]
    [ 0.278838] pnp 00:08: [io 0x0067-0x006f]
    [ 0.278840] pnp 00:08: [io 0x0072-0x007f]
    [ 0.278842] pnp 00:08: [io 0x0080]
    [ 0.278845] pnp 00:08: [io 0x0084-0x0086]
    [ 0.278847] pnp 00:08: [io 0x0088]
    [ 0.278849] pnp 00:08: [io 0x008c-0x008e]
    [ 0.278852] pnp 00:08: [io 0x0090-0x009f]
    [ 0.278854] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.278856] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.278859] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.278861] pnp 00:08: [io 0x0800-0x087f]
    [ 0.278863] pnp 00:08: [io 0x0400-0x041f]
    [ 0.278866] pnp 00:08: [io 0x0500-0x057f]
    [ 0.278869] pnp 00:08: [mem 0xfe9fac00-0xfe9facff window]
    [ 0.278871] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.278874] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.278876] pnp 00:08: [mem 0xfed45000-0xfed89fff]
    [ 0.278879] pnp 00:08: [mem 0xfed90000-0xfed90fff]
    [ 0.278881] pnp 00:08: [mem 0xfed91000-0xfed91fff]
    [ 0.278884] pnp 00:08: [mem 0xfed92000-0xfed92fff]
    [ 0.278886] pnp 00:08: [mem 0xfed93000-0xfed93fff]
    [ 0.278888] pnp 00:08: [mem 0xffb00000-0xffbfffff]
    [ 0.278891] pnp 00:08: [mem 0xfff00000-0xffffffff]
    [ 0.278969] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.278973] system 00:08: [io 0x0800-0x087f] has been reserved
    [ 0.278976] system 00:08: [io 0x0400-0x041f] has been reserved
    [ 0.278979] system 00:08: [io 0x0500-0x057f] has been reserved
    [ 0.278982] system 00:08: [mem 0xfe9fac00-0xfe9facff window] has been reserved
    [ 0.278986] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.278989] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.278993] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
    [ 0.278996] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
    [ 0.278999] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
    [ 0.279002] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
    [ 0.279006] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
    [ 0.279009] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.279012] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.279016] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279083] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.279119] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.279178] pnp 00:0a: [mem 0xffa00000-0xffbfffff]
    [ 0.279181] pnp 00:0a: [mem 0xffe00000-0xffffffff]
    [ 0.279236] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
    [ 0.279239] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
    [ 0.279243] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279292] pnp 00:0b: [mem 0xffc00000-0xffdfffff]
    [ 0.279347] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
    [ 0.279351] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279412] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.279415] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.279417] pnp 00:0c: [mem 0xfec10000-0xfec17fff]
    [ 0.279419] pnp 00:0c: [mem 0xfec18000-0xfec1ffff]
    [ 0.279422] pnp 00:0c: [mem 0xfec38000-0xfec3ffff]
    [ 0.279424] pnp 00:0c: [io 0x0250-0x0253]
    [ 0.279427] pnp 00:0c: [io 0x0256-0x025f]
    [ 0.279484] system 00:0c: [io 0x0250-0x0253] has been reserved
    [ 0.279487] system 00:0c: [io 0x0256-0x025f] has been reserved
    [ 0.279491] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.279494] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.279497] system 00:0c: [mem 0xfec10000-0xfec17fff] has been reserved
    [ 0.279501] system 00:0c: [mem 0xfec18000-0xfec1ffff] has been reserved
    [ 0.279504] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved
    [ 0.279508] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279585] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [ 0.279641] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.279645] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279954] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [ 0.279957] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [ 0.279965] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [ 0.279967] pnp 00:0e: [mem 0x00100000-0x7ddfffff]
    [ 0.279970] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
    [ 0.280081] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.280085] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.280088] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.280092] system 00:0e: [mem 0x00100000-0x7ddfffff] could not be reserved
    [ 0.280095] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.280257] pnp: PnP ACPI: found 15 devices
    [ 0.280259] ACPI: ACPI bus type pnp unregistered
    [ 0.316954] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.317008] pci 0000:00:1c.5: BAR 15: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317012] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.317014] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.317021] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.317026] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.317035] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.317037] pci 0000:00:1c.1: bridge window [io disabled]
    [ 0.317045] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.317050] pci 0000:00:1c.1: bridge window [mem pref disabled]
    [ 0.317059] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.317063] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.317070] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.317077] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317086] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.317088] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.317094] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.317100] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.317124] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.317130] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.317141] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.317147] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.317156] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.317162] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.317171] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.317176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.317179] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.317181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.317184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.317187] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
    [ 0.317191] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.317194] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
    [ 0.317197] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.317200] pci_bus 0000:03: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317203] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.317206] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.317209] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.317211] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.317214] pci_bus 0000:04: resource 8 [mem 0x7de00000-0xffffffff]
    [ 0.317261] NET: Registered protocol family 2
    [ 0.317339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.317587] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.318048] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.318337] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.318341] TCP reno registered
    [ 0.318344] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.318357] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.318534] NET: Registered protocol family 1
    [ 0.318557] pci 0000:00:02.0: Boot video device
    [ 0.318744] PCI: CLS 32 bytes, default 64
    [ 0.318812] Unpacking initramfs...
    [ 0.362878] Freeing initrd memory: 2132k freed
    [ 0.363915] Simple Boot Flag at 0x51 set to 0x1
    [ 0.364233] apm: BIOS not found.
    [ 0.364425] audit: initializing netlink socket (disabled)
    [ 0.364441] type=2000 audit(1312909012.363:1): initialized
    [ 0.368688] highmem bounce pool size: 64 pages
    [ 0.368694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.378607] VFS: Disk quotas dquot_6.5.2
    [ 0.378705] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.378834] msgmni has been set to 1713
    [ 0.379068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.379105] io scheduler noop registered
    [ 0.379108] io scheduler deadline registered
    [ 0.379123] io scheduler cfq registered (default)
    [ 0.379271] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.379334] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.379455] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.379513] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.379630] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.379688] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.379845] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.379852] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.379878] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.379881] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.379887] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.379912] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.379915] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.379921] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.380079] intel_idle: MWAIT substates: 0x2220
    [ 0.380081] intel_idle: does not run on family 6 model 23
    [ 0.380087] ERST: Table is not found!
    [ 0.380103] isapnp: Scanning for PnP cards...
    [ 0.737174] isapnp: No Plug & Play device found
    [ 0.737249] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.927374] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.930998] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.934050] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.934091] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.934122] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.934155] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.934186] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.934296] mousedev: PS/2 mouse device common for all mice
    [ 0.934388] rtc_cmos 00:03: RTC can wake from S4
    [ 0.934524] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.934557] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.934588] cpuidle: using governor ladder
    [ 0.934590] cpuidle: using governor menu
    [ 0.934876] TCP cubic registered
    [ 0.934879] NET: Registered protocol family 17
    [ 0.934888] Registering the dns_resolver key type
    [ 0.934915] Using IPI No-Shortcut mode
    [ 0.935017] PM: Hibernation image not present or could not be loaded.
    [ 0.935024] registered taskstats version 1
    [ 0.939311] rtc_cmos 00:03: setting system clock to 2011-08-09 16:56:53 UTC (1312909013)
    [ 0.939352] Initializing network drop monitor service
    [ 0.939447] Freeing unused kernel memory: 500k freed
    [ 0.939681] Write protecting the kernel text: 3416k
    [ 0.939709] Write protecting the kernel read-only data: 1036k
    [ 0.953922] udevd[54]: starting version 173
    [ 0.977498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.019140] usbcore: registered new interface driver usbfs
    [ 1.019176] usbcore: registered new interface driver hub
    [ 1.049312] usbcore: registered new device driver usb
    [ 1.050500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.050540] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.050563] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.050567] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.050604] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.050644] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.068233] SCSI subsystem initialized
    [ 1.068335] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 1.068361] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
    [ 1.079182] libata version 3.00 loaded.
    [ 1.080102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.080303] hub 1-0:1.0: USB hub found
    [ 1.080309] hub 1-0:1.0: 6 ports detected
    [ 1.080423] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.080445] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.080450] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.080461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.080495] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.084638] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 1.084665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
    [ 1.096705] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.097358] hub 2-0:1.0: USB hub found
    [ 1.097365] hub 2-0:1.0: 6 ports detected
    [ 1.097486] ahci 0000:00:1f.2: version 3.0
    [ 1.097508] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.097565] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.097619] ahci: SSS flag set, parallel bus scan disabled
    [ 1.097653] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 1.097657] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 1.097664] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.103903] scsi0 : ahci
    [ 1.104030] scsi1 : ahci
    [ 1.104126] scsi2 : ahci
    [ 1.104218] scsi3 : ahci
    [ 1.104495] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
    [ 1.104500] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 43
    [ 1.104502] ata3: DUMMY
    [ 1.104504] ata4: DUMMY
    [ 1.163917] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.163984] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163997] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.164113] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.164129] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.164178] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
    [ 1.164368] hub 3-0:1.0: USB hub found
    [ 1.164373] hub 3-0:1.0: 2 ports detected
    [ 1.164477] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 1.164486] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.164490] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.164500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.164539] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
    [ 1.164699] hub 4-0:1.0: USB hub found
    [ 1.164704] hub 4-0:1.0: 2 ports detected
    [ 1.164787] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.164795] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.164799] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.164808] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.164848] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
    [ 1.165008] hub 5-0:1.0: USB hub found
    [ 1.165012] hub 5-0:1.0: 2 ports detected
    [ 1.165099] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.165107] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.165111] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.165122] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.165154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
    [ 1.165311] hub 6-0:1.0: USB hub found
    [ 1.165316] hub 6-0:1.0: 2 ports detected
    [ 1.165398] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.165408] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.165412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.165421] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.165450] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
    [ 1.165607] hub 7-0:1.0: USB hub found
    [ 1.165611] hub 7-0:1.0: 2 ports detected
    [ 1.165696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.165704] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.165708] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.165717] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.165747] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
    [ 1.165914] hub 8-0:1.0: USB hub found
    [ 1.165919] hub 8-0:1.0: 2 ports detected
    [ 1.366705] Refined TSC clocksource calibration: 1795.499 MHz.
    [ 1.366711] Switching to clocksource tsc
    [ 1.386680] usb 1-3: new high speed USB device number 2 using ehci_hcd
    [ 1.423359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.425060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.425379] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.425384] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.427244] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
    [ 1.427247] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.429377] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.429687] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.429691] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.431520] ata1.00: configured for UDMA/133
    [ 1.431677] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5
    [ 1.750027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.765044] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.765049] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.778146] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
    [ 1.794186] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.794191] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.807014] ata2.00: configured for UDMA/100
    [ 1.810609] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
    [ 1.817797] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.817854] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.817857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.817881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.822707] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.822711] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.823032] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.836683] usb 6-2: new low speed USB device number 2 using uhci_hcd
    [ 1.859083] sda: sda1 sda2 sda3 sda4 < sda5 >
    [ 1.859555] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.023721] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
    [ 2.023829] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-2/input0
    [ 2.023850] usbcore: registered new interface driver usbhid
    [ 2.023852] usbhid: USB HID core driver
    [ 2.650851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.258021] udevd[287]: starting version 173
    [ 4.739711] asus_acpi: Asus Laptop ACPI Extras version 0.30
    [ 4.739876] asus_acpi: unsupported model K50IJ, trying default values
    [ 4.739878] asus_acpi: send /proc/acpi/dsdt to the developers
    [ 4.816300] iTCO_vendor_support: vendor-support=0
    [ 4.824448] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.824569] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
    [ 4.824660] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.827238] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.827382] ACPI: AC Adapter [AC0] (on-line)
    [ 4.828155] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.828165] ACPI: Sleep Button [SLPB]
    [ 4.828230] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 4.831492] ACPI: Lid Switch [LID]
    [ 4.831614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 4.831621] ACPI: Power Button [PWRF]
    [ 4.865124] Linux agpgart interface v0.103
    [ 4.921369] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.936814] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.936824] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.941752] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.941770] ATL1E 0000:03:00.0: setting latency timer to 64
    [ 4.945788] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.945792] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.970466] ACPI: acpi_idle registered with cpuidle
    [ 4.974411] Monitor-Mwait will be used to enter C-1 state
    [ 4.974445] Monitor-Mwait will be used to enter C-2 state
    [ 4.974469] Monitor-Mwait will be used to enter C-3 state
    [ 4.974477] Marking TSC unstable due to TSC halts in idle
    [ 4.975874] Switching to clocksource hpet
    [ 5.032723] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.032822] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.033439] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 5.033728] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 5.105663] [drm] Initialized drm 1.1.0 20060810
    [ 5.107962] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.107977] ath9k 0000:02:00.0: setting latency timer to 64
    [ 5.142586] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.142593] i915 0000:00:02.0: setting latency timer to 64
    [ 5.159185] ath: EEPROM regdomain: 0x60
    [ 5.159188] ath: EEPROM indicates we should expect a direct regpair map
    [ 5.159191] ath: Country alpha2 being used: 00
    [ 5.159193] ath: Regpair used: 0x60
    [ 5.168070] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 5.168078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.168080] [drm] Driver supports precise vblank timestamp query.
    [ 5.168129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 5.191736] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 5.192424] Registered led device: ath9k-phy0
    [ 5.192433] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf81a0000, irq=17
    [ 5.288322] asus_laptop: Asus Laptop Support version 0.42
    [ 5.288486] asus_laptop: K50IJ model detected
    [ 5.288978] asus_laptop: Backlight controlled by ACPI video driver
    [ 5.289084] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
    [ 5.393429] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.393627] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 5.597755] psmouse serio4: ID: 10 00 64
    [ 5.702553] elantech: assuming hardware version 2, firmware version 4.1.1
    [ 5.738839] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
    [ 5.780864] fbcon: inteldrmfb (fb0) is primary device
    [ 5.825826] Console: switching to colour frame buffer device 170x48
    [ 5.831063] fb0: inteldrmfb frame buffer device
    [ 5.831065] drm: registered panic notifier
    [ 5.833323] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 5.834567] acpi device:38: registered as cooling_device2
    [ 5.834817] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 5.834975] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 5.835272] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.835329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 5.835420] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 5.835458] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 5.840235] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
    [ 6.069285] Linux media interface: v0.10
    [ 6.088833] Linux video capture interface: v2.00
    [ 6.097205] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
    [ 6.120085] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
    [ 6.120179] usbcore: registered new interface driver uvcvideo
    [ 6.120181] USB Video Class driver (v1.1.0)
    [ 7.622339] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 7.907480] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.987363] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.044201] Adding 4213756k swap on /dev/sda5. Priority:-1 extents:1 across:4213756k
    Xorg.0.log:
    [ 25.092]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 25.092]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 25.092] X Protocol Version 11, Revision 0
    [ 25.092] Build Operating System: Linux 3.0.0-ARCH i686
    [ 25.092] Current Operating System: Linux saso-laptop 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686
    [ 25.093] Kernel command line: root=/dev/sda1 ro quiet
    [ 25.093] Build Date: 08 August 2011 08:28:07AM
    [ 25.093]
    [ 25.093] Current version of pixman: 0.22.2
    [ 25.093] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 25.093] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 25.093] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 9 18:57:17 2011
    [ 25.215] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 25.248] (==) No Layout section. Using the first Screen section.
    [ 25.248] (==) No screen section available. Using defaults.
    [ 25.248] (**) |-->Screen "Default Screen Section" (0)
    [ 25.248] (**) | |-->Monitor "<default monitor>"
    [ 25.248] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 25.248] (==) Automatically adding devices
    [ 25.248] (==) Automatically enabling devices
    [ 25.303] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 25.303] Entry deleted from font path.
    [ 25.339] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 25.339] Entry deleted from font path.
    [ 25.339] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 25.340] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 25.340] Entry deleted from font path.
    [ 25.340] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 25.340] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 25.340] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 25.340] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 25.340] (II) Loader magic: 0x822e4e0
    [ 25.340] (II) Module ABI versions:
    [ 25.340] X.Org ANSI C Emulation: 0.4
    [ 25.340] X.Org Video Driver: 10.0
    [ 25.340] X.Org XInput driver : 12.2
    [ 25.340] X.Org Server Extension : 5.0
    [ 25.341] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
    [ 25.341] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
    [ 25.341] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 25.341] (II) LoadModule: "extmod"
    [ 25.358] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 25.373] (II) Module extmod: vendor="X.Org Foundation"
    [ 25.373] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.373] Module class: X.Org Server Extension
    [ 25.373] ABI class: X.Org Server Extension, version 5.0
    [ 25.373] (II) Loading extension MIT-SCREEN-SAVER
    [ 25.373] (II) Loading extension XFree86-VidModeExtension
    [ 25.373] (II) Loading extension XFree86-DGA
    [ 25.374] (II) Loading extension DPMS
    [ 25.374] (II) Loading extension XVideo
    [ 25.374] (II) Loading extension XVideo-MotionCompensation
    [ 25.374] (II) Loading extension X-Resource
    [ 25.374] (II) LoadModule: "dbe"
    [ 25.374] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 25.387] (II) Module dbe: vendor="X.Org Foundation"
    [ 25.387] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.387] Module class: X.Org Server Extension
    [ 25.387] ABI class: X.Org Server Extension, version 5.0
    [ 25.387] (II) Loading extension DOUBLE-BUFFER
    [ 25.387] (II) LoadModule: "glx"
    [ 25.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 25.411] (II) Module glx: vendor="X.Org Foundation"
    [ 25.411] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.411] ABI class: X.Org Server Extension, version 5.0
    [ 25.411] (==) AIGLX enabled
    [ 25.411] (II) Loading extension GLX
    [ 25.411] (II) LoadModule: "record"
    [ 25.411] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 25.412] (II) Module record: vendor="X.Org Foundation"
    [ 25.412] compiled for 1.10.3.901, module version = 1.13.0
    [ 25.412] Module class: X.Org Server Extension
    [ 25.412] ABI class: X.Org Server Extension, version 5.0
    [ 25.412] (II) Loading extension RECORD
    [ 25.412] (II) LoadModule: "dri"
    [ 25.412] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 25.420] (II) Module dri: vendor="X.Org Foundation"
    [ 25.420] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.420] ABI class: X.Org Server Extension, version 5.0
    [ 25.420] (II) Loading extension XFree86-DRI
    [ 25.420] (II) LoadModule: "dri2"
    [ 25.420] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 25.428] (II) Module dri2: vendor="X.Org Foundation"
    [ 25.428] compiled for 1.10.3.901, module version = 1.2.0
    [ 25.428] ABI class: X.Org Server Extension, version 5.0
    [ 25.429] (II) Loading extension DRI2
    [ 25.429] (==) Matched intel as autoconfigured driver 0
    [ 25.429] (==) Matched vesa as autoconfigured driver 1
    [ 25.429] (==) Matched fbdev as autoconfigured driver 2
    [ 25.429] (==) Assigned the driver to the xf86ConfigLayout
    [ 25.429] (II) LoadModule: "intel"
    [ 25.429] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 25.448] (II) Module intel: vendor="X.Org Foundation"
    [ 25.448] compiled for 1.10.2, module version = 2.15.0
    [ 25.448] Module class: X.Org Video Driver
    [ 25.448] ABI class: X.Org Video Driver, version 10.0
    [ 25.448] (II) LoadModule: "vesa"
    [ 25.449] (WW) Warning, couldn't open module vesa
    [ 25.449] (II) UnloadModule: "vesa"
    [ 25.449] (II) Unloading vesa
    [ 25.449] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 25.451] (II) LoadModule: "fbdev"
    [ 25.451] (WW) Warning, couldn't open module fbdev
    [ 25.451] (II) UnloadModule: "fbdev"
    [ 25.451] (II) Unloading fbdev
    [ 25.451] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 25.453] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 25.454] (--) using VT number 7
    [ 25.461] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 25.461] drmOpenDevice: node name is /dev/dri/card0
    [ 25.461] drmOpenDevice: open result is 9, (OK)
    [ 25.462] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 25.462] drmOpenDevice: node name is /dev/dri/card0
    [ 25.462] drmOpenDevice: open result is 9, (OK)
    [ 25.462] drmOpenByBusid: drmOpenMinor returns 9
    [ 25.462] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 25.462] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 25.462] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 25.462] (==) intel(0): RGB weight 888
    [ 25.462] (==) intel(0): Default visual is TrueColor
    [ 25.462] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    [ 25.462] (--) intel(0): Chipset: "GM45"
    [ 25.462] (**) intel(0): Relaxed fencing enabled
    [ 25.462] (**) intel(0): Framebuffer tiled
    [ 25.462] (**) intel(0): Pixmaps tiled
    [ 25.462] (**) intel(0): 3D buffers tiled
    [ 25.462] (**) intel(0): SwapBuffers wait enabled
    [ 25.462] (==) intel(0): video overlay key set to 0x101fe
    [ 25.462] (II) intel(0): Output LVDS1 has no monitor section
    [ 25.462] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 25.480] (II) intel(0): Output VGA1 has no monitor section
    [ 26.013] (II) intel(0): Output HDMI1 has no monitor section
    [ 26.014] (II) intel(0): Output DP1 has no monitor section
    [ 26.015] (II) intel(0): Output DP2 has no monitor section
    [ 26.015] (II) intel(0): EDID for output LVDS1
    [ 26.015] (II) intel(0): Manufacturer: LGD Model: 1e8 Serial#: 0
    [ 26.015] (II) intel(0): Year: 2008 Week: 0
    [ 26.015] (II) intel(0): EDID Version: 1.3
    [ 26.015] (II) intel(0): Digital Display Input
    [ 26.015] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 26.015] (II) intel(0): Gamma: 2.20
    [ 26.015] (II) intel(0): No DPMS capabilities specified
    [ 26.015] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 26.015] (II) intel(0): First detailed timing is preferred mode
    [ 26.015] (II) intel(0): redX: 0.618 redY: 0.355 greenX: 0.335 greenY: 0.584
    [ 26.015] (II) intel(0): blueX: 0.150 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
    [ 26.015] (II) intel(0): Manufacturer's mask: 0
    [ 26.015] (II) intel(0): Supported detailed timing:
    [ 26.015] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm
    [ 26.015] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 26.015] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
    [ 26.015] (II) intel(0): LG Display
    [ 26.015] (II) intel(0): LP156WH2-TLA1
    [ 26.015] (II) intel(0): EDID (in hex):
    [ 26.015] (II) intel(0): 00ffffffffffff0030e4e80100000000
    [ 26.015] (II) intel(0): 00120103802213780a4e859e5b559526
    [ 26.015] (II) intel(0): 1a505400000001010101010101010101
    [ 26.015] (II) intel(0): 0101010101013e1c56a0500016303020
    [ 26.015] (II) intel(0): 350058c2100000190000000000000000
    [ 26.015] (II) intel(0): 00000000000000000000000000fe004c
    [ 26.015] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 26.016] (II) intel(0): 004c503135365748322d544c4131004d
    [ 26.016] (II) intel(0): EDID vendor "LGD", prod id 488
    [ 26.016] (II) intel(0): Printing DDC gathered Modelines:
    [ 26.016] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
    [ 26.016] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Printing probed modes for output LVDS1
    [ 26.016] (II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
    [ 26.016] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 26.016] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 26.016] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 26.016] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 26.033] (II) intel(0): EDID for output VGA1
    [ 26.566] (II) intel(0): EDID for output HDMI1
    [ 26.567] (II) intel(0): EDID for output DP1
    [ 26.568] (II) intel(0): EDID for output DP2
    [ 26.568] (II) intel(0): Output LVDS1 connected
    [ 26.568] (II) intel(0): Output VGA1 disconnected
    [ 26.568] (II) intel(0): Output HDMI1 disconnected
    [ 26.568] (II) intel(0): Output DP1 disconnected
    [ 26.568] (II) intel(0): Output DP2 disconnected
    [ 26.568] (II) intel(0): Using exact sizes for initial modes
    [ 26.568] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 26.568] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 26.568] (II) intel(0): Kernel page flipping support detected, enabling
    [ 26.568] (**) intel(0): Display dimensions: (340, 190) mm
    [ 26.568] (**) intel(0): DPI set to (102, 102)
    [ 26.568] (II) Loading sub module "fb"
    [ 26.569] (II) LoadModule: "fb"
    [ 26.569] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 26.584] (II) Module fb: vendor="X.Org Foundation"
    [ 26.584] compiled for 1.10.3.901, module version = 1.0.0
    [ 26.584] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.584] (II) Loading sub module "dri2"
    [ 26.585] (II) LoadModule: "dri2"
    [ 26.585] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 26.585] (II) Module dri2: vendor="X.Org Foundation"
    [ 26.585] compiled for 1.10.3.901, module version = 1.2.0
    [ 26.585] ABI class: X.Org Server Extension, version 5.0
    [ 26.585] (==) Depth 24 pixmap format is 32 bpp
    [ 26.585] (II) intel(0): [DRI2] Setup complete
    [ 26.585] (II) intel(0): [DRI2] DRI driver: i965
    [ 26.585] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 26.600] (II) UXA(0): Driver registered support for the following operations:
    [ 26.600] (II) solid
    [ 26.600] (II) copy
    [ 26.600] (II) composite (RENDER acceleration)
    [ 26.600] (II) put_image
    [ 26.600] (II) get_image
    [ 26.600] (==) intel(0): Backing store disabled
    [ 26.600] (==) intel(0): Silken mouse enabled
    [ 26.601] (II) intel(0): Initializing HW Cursor
    [ 26.613] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.614] (==) intel(0): DPMS enabled
    [ 26.614] (==) intel(0): Intel XvMC decoder enabled
    [ 26.614] (II) intel(0): Set up textured video
    [ 26.614] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 26.614] (II) intel(0): direct rendering: DRI2 Enabled
    [ 26.614] (==) intel(0): hotplug detection: "enabled"
    [ 26.614] (--) RandR disabled
    [ 26.614] (II) Initializing built-in extension Generic Event Extension
    [ 26.614] (II) Initializing built-in extension SHAPE
    [ 26.614] (II) Initializing built-in extension MIT-SHM
    [ 26.614] (II) Initializing built-in extension XInputExtension
    [ 26.614] (II) Initializing built-in extension XTEST
    [ 26.614] (II) Initializing built-in extension BIG-REQUESTS
    [ 26.614] (II) Initializing built-in extension SY

    Sorry for that. I had some issues with reproducing the problem. It seems that i can reproduce it only on fresh restart.
    Last edited by Shark (2011-08-09 18:27:10)

  • External monitor connected to MBA causes Internet slow to a crawl

    Real odd issue. I have a Macbook Air and connected to it is a DVI based Formac 19" monitor. Has worked fine with my old graphite base station at B rates. Purchased a new Netgear Dual Band N router and if I connect my external monitor to my MBA, my internet becomes very unstable and hardely works. I mean slug speeds. Not even 28K I would say. I then unplug the white dvi adapter that Apple provided with the MBA from the side of the MBA, don't even need to power down the monitor and can leave it turned on (I guess it is sleep mode since no video signal), and I get great speeds again.
    What gives. Is there some issue with monitors connected to the MBA causing interference with airport wireless?? I had the same issue with a nice Belkin N1 and returned that a couple weeks ago thinking it was a crappy router but now another real nice wireless router has same issue.
    Or is this an issue with MBA itself. I really need a 2nd display for when I work all day long.
    Any suggestions.
    Thanks
    tj

    I'm having the same issue. My home network setup has an Airport Extreme running 802.11n, with an Airport Express attached for a b/g network. My Macbook Air connects fine to the n network except for when I connect it to an external monitor. Right now I'm seeing transfer speeds of 50Kb/sec. Has anyone come across a solution?

Maybe you are looking for

  • Iphone will not sync pics to Adobe Photoshop Album 3.0

    When i connect my Iphone to my PC, Photoshop album detects it as a digital camera and opens up. It even brings up thumbnails of all the pictures on my Iphone. But when i click on "GET PHOTOS" to download the pictures to my computer, the process start

  • Domain name transfer issues

    I am having trouble with a domain name I purchased forward to my .mac. This is the second domain name I have purchased. The first one I had issues with too, but it works fine now when the name is typed in a browser window. I copied the exact info, bu

  • Information about S5

    For those who want to know more about the S5, you can go to http://www.gottabemobile.com/. The site is not specifically about the S5, but I found the site to cover a lot of topics about Android and other phones. There are many articles about the the

  • Red cast in photos

    iphoto 5 with osx 10.4 some of my photos have a red cast to them. When i open them with preview the image is fine. how do i fix this problem fred

  • Releasing Holds using process order API in 11.5.8

    Hi, I am encountering a error when i try to release hold which has Criteria1 as Item and Criteria2 as Warehouse. When i try to release these kind of holds, i am getting the following error message 'Hold Source Not Found'. Please find part of the atta