2 external monitors and internal Screen on T430S and Mini Dock Plus
Hi Community,
I just got my new T430S and the MiniDock Plus. On the website I've ordered the combination I had the impression that I could use two external screens and the internal screen at once.
Unfortunately I don't manage to find the right settings to achieve that the internal screen is switched on.
I wonder if its just a question of settings or is it simply not possible to extend the screen over three screens.
Any help or hint is greatly appreciated,
Andreas
Intel 3000 doesn't support 3 independent LCD in this manner. You would need something USB2DVI or USB2VGA adapter to get the third LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
Satellite A100-646 and external monitor shows black screen
Hello to everybody,
I have a similar problem with A100-646 (bought in Italy). Laptop's LCD and external monitor shows black screen but system boots without other problem. When laptop is not used for a long time (half a year) it work for one week without any problem.
Unfortunately, there is no proper service in a place where I live. Perhaps, there is a problem with power supply.
Is there other idea? Does anybody have a service manual? ([email protected])It is not easy to find shop where you can order original and new hardware components.
Best source for such parts is definitely eBay where you can buy used but well working components.
Upgrade? You must know that upgrade on mobile computers is not the same as on desktops. Cooling possibilities are not the best and each notebook model has optimized cooling system for original parts. So new graphic card can be more powerful and produce more heat and it is definitely not good for your notebook. So best thing you can do is to replace it with original part. -
My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??
Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H -
when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!No guarantess but try smc and pram resets,
-
I tried to ru nthe new update on my phone and the screen is blank and wont reset the only thing that comes up is the itunes logo and a picture of the charger beneath that how do i fix this so my phone will turn on, this has happened twice before
Hello, djernigan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeledGet more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
I tried connecting the device to my computer and itunes said that it could not identify my device.What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?
Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy -
My iPhone 5 is overheaded while charging and the screen is black and is not working. What should i do?
Sounds like a battery failure. Your phone is under warranty. Bring it back to Apple
-
I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????
Connect your iPhone to iTunes and restore or follow the prompts.
-
I have iphone 4 and i went to restore but its hanging and its screen is black and loading circle
i have iphone 4 and i went to restore but its hanging and its screen is black and loading circle please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
ipod home screen says ipod is disable. Connect to itunes. I connect to itunes and a screen pops up and says ipod is locked
hey just sell it to me how much and send me back a message thanks
-
two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphoneMake an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.
-
I used Cmd +Q to close a programme and the screen went blank and even tho the power cord is attached the macbook is not powering up any ideas
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best. -
I went to update my ipad 2 and the screen turned black and now it does not turn on what do i do
I WENT TO UPDATE MY IPAD 2 AND THE SCREEN TURNED BLACK AND NOW IT DOES NOT TURN ON, PLEASE HELP!!
THANK YOU FOR THE SIDE BAR SOLUTIONS, ITS WORKING AGAIN !!
Maybe you are looking for
-
Missing information when updating invoice line
Dear all, I am updating invoice line information but system giving and error declare begin for rec in (select l.* from ap_invoices_all l where invoice_num = 'akp/445' and vendor_id = 1068 and org_id = 82) loop AP_INVOICES_PKG.Update_Row(X_Rowid => 'A
-
Transfer PE7 project from one computer to another?
Hi all, As long as I have started a project in one folder and put all the assets/captures in the same folder folder, can I simply move that folder to another computer that has PE7 installed and expect that the project will open in all its glory? Than
-
Hi We just upgraded to BW 3.5 (Level 11) with Content 3.5.3 (Level 2) and i now wanted to use the new Master Web Item "Web Template". The problem i now have is, that this item is not on the list when starting WAD. I checked R3-system. Class CL_RSR_WW
-
A frustrating number of crashes today in PSE 8. Error file below. Any ideas on what the probe is? (PSE8 on a Macbook running 10.6.8.) Help! ======================================== Process: Adobe Photoshop Elements [1894] Path: /Ap
-
Preserve session across web applications.
I've deployed 2 different web applications, each part of their own .ear . Is there any way to make the two web applications use the SAME session object ? My problem is that when I store an object in the session within one application, the object isn'