2 External Monitors with the T430s with Intel HD4000

I have read several multiple monitor threads but could not get a clear solution to this.
Model: I have a T430s with Intel HD4000 graphics.
Desired set up: 2 External Monitors + Lenovo LCD
Problem: It seems that I can only drive one external monitor. I'd like to drive two external monitors, as I did previously with my T420.
What I've tried: I have a dock and have tried VGA + DVI for the external monitors, as well as DVI + DVI. Neither setup has worked. It always greys out the third monitor in the Windows Display options.
Any thoughts on how to drive two external monitors with the T430s? Clarity is appreciated. Thank you!

RobertWerner2 wrote:
If I'm reading the link you provided correctly, can I correctly assume that I CAN connect two external displays with just the W520 Laptop and NO docking station?
I tested this today.  You can connect two external displays (1 VGA, 1 DisplayPort) without a docking station.  The result is 3 independent displays - the ThinkPad LCD, the VGA monitor, and the DisplayPort monitor. 

Similar Messages

  • My MBP recently started logging itself out.  I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. When I disconnected it, the problem went away.

    My early 2011 MBP laptop (OS Yosemite 10.2.2) recently started logging itself out.  I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. I installed Thunderbolt firmware update 1.2, that did not correct the problem. When I disconnect the external monitor, the problem went away. Is there something I can do to be able to use the external monitor again?

    Try Function F1

  • HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3

    HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3.  When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working.  When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode.  I am using a DVI connection with the adapter for the mini display plug.  REALLY FRUSTRATING. Any help would be extremely appreciated. 

    Hi lancekatigbak,
    If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    - Brenden

  • How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine.

    How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.

    This is not a supported feature of iPhone or Time Capsule.

  • I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

    I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?

    Presumably the mains cable, which you can get from an Apple Store.

  • My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

    My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

    Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
    You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
    I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
    Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
    Thanks. Hope my other question has an answer out here.
    Paul H

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I would like to use my early 2008 imac as an external monitor in the 2012 mac mini

    I would like to use my early 2008 imac (MB325LL/A) as an external monitor for the late 2012 mac mini,(not ordered yet). Is this possible in any manner? The iMac utilizes mini-DVI output, thus my hopes are not too good.
    Thanks,

    ScreenRecycler...
    http://www.screenrecycler.com/ScreenRecycler.html

  • How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

    Dear all
    How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
    Thanks
    Regards
    karan

    Hello
    These are the following errors
    1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
    2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
    3.
    <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>  
    <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />  
    <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
    Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
    tThere are repeating errors also.
    TThanks
    Regards
    kkaran

  • There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.

    Absolutely INFURIATING.
    I have spent absolute hours building a photo album for the first year or my sons life. Sorting through quite literally thousands and thousands of images. Got a brilliant looking album using 177 of them.
    Now everytime I try to check out it won't get past page 1 of building the book.
    It says the following "There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.".
    The images all look perfect. I have even tried taking them out and re adding the first page images from the library.
    Same problem.
    This is so annoying. So far I have NOT been happy with this iphoto application having nothing but problems with missing thumbnails. Corrupted images. Things that have never happened to me using a windows machine.

    Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
    For testing, create a new book with only the images you want to check.
    If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

  • I have a factory unlocked 4s I'm haveing trouble with the mms withI have a  straight talk I'm useing the sim card swap with tmoblil sim card I'm following the insructions but it works for a while and then its gone. I've set the settings at least ten times

    I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.

        Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
    I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
    In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Is the Mountain Lion full compatible with the Final with Pro?

    I will like to upgrade from Snow leopard 10.6.8 to Mountain Lion. Is the Mountain Lion full compatible with the Final with Pro?

    OS X Mountain Lion is compatible with Final Cut Pro X and Final Cut Pro 7 updated to the most recent version. If you want to check that your applications are compatible, see > http://www.roaringapps.com
    Make a backup of your data before upgrading in case that Final Cut doesn't work under Mountain Lion

  • Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

    Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

    Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts.  I've read that this has worked for some.

  • I had this problem with the folder with the question mark in it

    hello guys, so i had this problem with the folder with the question mark in it and now i just keep the options button pressed till it shows me the option to boot and so how can i get that solved and my mac can just boot normally and something else is that i press on system preferences and nothing happens it basicly does not exist so if you guys could help me it would be great
    <Re-Titled By Host>

    It sounds like either the system on your disk drive is corrupt or the disk drive died.
    Assuming the information in your profile is correct then boot from the install DVD for you MBP. From there you should be able to run Disk Utility to check out the disk drive.

Maybe you are looking for