2 GB SD Card not working with Tiger

I have a new 2 GB SD card. I used the card in my camera to take pictures without any problems. I can also put the card in my iPaq and view the photos there without any problem.
When I try to copy the images to my Mac using a Belkin 15-in-1 reader, however, it doesn't work. When I put the card in the reader, Tiger tells me the card is not readable and asks if I want to format it.
I went ahead and put the card back into my iPaq and copied the pictures to its internal memory, and then put it back into the card reader attached to the mac. This time when it asked if I wanted to format, with the images saved on the iPaq, I clicked Format. It just froze though.
I pulled the card out, opened Disk Utility and tried to format it using that software, but again it just hangs.
What's going on? Anyone got any advice?

Hi Ho Lee MACkeral;
I don't know about your problem with the SD chips and the card reader but I had a simular problem with CF cards and a card reader. I was using Lexar 512 MB CF cards and a Lexar card reader. When I upgraded to the newest 1 GB CF cards my card reader would no longer was able to read them. So I called Lexar. They told me to send in the old card reader and they replaced it with the new model for free. So it is possible that something changed with the newer SD cards so that the card reader is no longer able to read them. You might ask the vendor who made your card reader about this. My advantage I think was that everything was Lexar which made it easy.
Allan

Similar Messages

An SCSI card that works with tiger?

I have aquired a Sony SDX S500C AIT-2 drive that I wish to use with my quicksilver G4 server. I need an Ultra wide SCSI card that will work with tiger. I thought this wouldn't be a problem, but after picking up the drive for cheap on eBay it now looks really hard to find anything that works with tiger for less than $400. Does anyone have any experience of an SCSI setup that actually works? The Initio Miles 9100UW looks promising, but according to the Dantz site it is not supported by retrospect, but I assume this doesn't necessarily mean that it doesn't work...
Looking forward to hearing your experiences.

Cards from ATTO work with OS X, and are highly reliable.

IChat not working with Tiger user

I recently received a new Macbook with Leopard already installed on it. I have 2 friends who also own Macbooks, who I iChat with.
One of my friends received her Macbook when Leopard just came out, so she had Tiger on it previously . The other friend has had her Macbook longer, and does not have Leopard, just Tiger.
When attempting to start an iChat with the friend with Tiger, it would not work. The weird thing about it though is that it has worked a few times before, if we kept trying and I found if I restarted my computer.
However, now the friend that previously had Tiger had problems with her Macbook and received a brand new one with Leopard already on it. Now it does not work for her to start an iChat with the Tiger user, although she had no problems with her old computer.
Sorry it's confusing!
But in conclusion, it seems that iChat is not working between a Leopard and Tiger user. The confusing part is that we have gotten it to work before...so I'm really not sure what the problem is.
What can we try to get this to work all the time, without her having to upgrade to Leopard?
I usually get an error response saying there was no data received for the last 10 seconds, and she gets different things about Bandwidth, and saying she cancelled the invitation when she didn't.
Thanks
Message was edited by: netsirk1608

Personally, I think it's Leopard that is at fault here. I had Tiger and my family and I would video iChat all the time. But then we downloaded Leopard. We discovered we could no longer video iChat.
My son used 4 different computers (all Macs of course), trying same network and different networks. What he discovered is that the ONLY way video iChat now works is if computers are on the same network. Well, how absurd, because the idea is to be able to video iChat with anyone, not just family members in the same household on the same network.
Apparently, somewhere, Apple (Leopard) bragged about their new improved iChat video on a network. Well, I think they forgot that not all of us are sitting in an office wanting to spend the time to iChat video with co-workers, but have friends and family in other areas we'd like to video iChat with.
So through a process of elimination, it all led back to Leopard as being the culprit, because Tiger to Tiger worked perfectly, and even Leopard to Tiger works IF you are on the same network.
I really do hope Apple supplies a FIX for this problem. I, for one, am VERY disappointed in the fact that I now have Leopard and can no longer video iChat with friends across the country.

Itunes gift cards not working with 2 separate acounts

Hello, We need some help with Itunes gift cards. My son received two gift cards and partially used one. Then my wife received a new ipod and we set up her account on the same computer as my son's and used the same email address. Now neither gift card will work. What can we do to remedy this? Thank you in advance for any help you can offer.

Yeah, that won't work, I guess the gift-giver didn't read the fine print
http://www.apple.com/support/itunes/musicstore/giftcertificate/
Can I redeem a US gift certificate if I live outside the US?
Gift certificates purchased on the iTunes Music Store are valid for use only in the country in which they were purchased. Gift certificates purchased in the United States may only be redeemed by residents of the United States.

Airport extreme card not working with leopard / G5

I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
1. Could it be a bad Airport extreme card?
2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
Message was edited by: anthonylkelly

Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

3G AT&T air cards not working with iChat, Please Help!!!

We have a macbook air, a black macbook and a macbook pro running 10.5.2. We can do audio and video conferencing with the local network with either airport or ethernet with the regular internet service provider. When we switch to the air cards (AirCard 875 USB) they can connect and chat but when they try to do video conferencing an error comes up saying that, well, en error had occurred. switching back to the local network, and all works fine. I'm sure we're not the only people using these cards using iChat so if anybody has come across this or similar issues please comment on this, thank you.

That was the older post. at this point we can forget about firewalls and airport. this is all thru the air cards. mentioning the local network (which does not have a firewall) was to point out that iChat seems to work fine and it's not a software issue in the computer end of it. Unless we can go into the aircard's settings and open ports there... if that makes any sense?

Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

I am using an Audio Science ASI 5111 Sound Card. I also used Audi
tion 3.0.1 on Windows 7.
The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode.
At times I get the R6025 error

Audio Science is aware of the issue. It has been solved by going back to an older driver. 3.12.07

My Mbox2 won't work with tiger 10.4

I am quite new to computor recording and bought an Mbox2 to record live guitar and vocals. My last recording system was the original Teac Portastudio. ($2000.00 in 1983) I love Garage Band for being so user friendly, but was concered that I would not be able to achieve a professional enough sounding final product. As the Mbox2 comes with Pro Tools, I thought I would give it try and take the plunge into learning Pro Tools. I guess I got in way over my head because I could not get the Mbox working. I originaly had purchased the Presonus Firebox, but the mixer would not work and the control panel would not open. I was able to use the Firebox for my guitar and my vocal mic and actually had a great time laying down a few live tracks then adding some midi tracks with Garage Band.I could not get into the cubase program that came with the Firebox and when I called thier tech support was told the mixer and control panel would not work with tiger 10.4. That was when I decided to try the Mbox. However,after my frustrating experience with the Mbox2, I am thinking of returning to the Firebox just so I can plug in my guitar and mic again. Is there another DAW out there that is compatible with my intel iMac tiger OS X 10.4, or would it be simpler for me to buy a pre amp/mixer and use the audio in on my mac? I would appreciate some help with this. Thanks.

"Could you recommend a pre amp mixer combination?
Would a Radio Shack quality do? I am working towards
producing a CD to sell from the stage at local gigs
so I do want good sound."
Hi Angelman. What is your budget for the mixer? What
type of inputs will you need? I'd stay away from
Radio Shack if you plan on producing/selling a CD.
BTW- some people are having problems with the
multimix (distorted outputs). If you're on a
tight budget I'd hold off on them for the time being
until they iron out what's wrong. Presonus Inspire is
OK, as is Tascam and M-Audio. It all depends on your
budget and what kind of inputs you'll need.
I have Martin D28 with an active pick up that I run through an LR Baggs DI box xlr out. I want to run a line out and record the line output as track 1. Next I have good quality condenser mics and would like to use one or more to record the guitar as track 2 and 3. I also want to record a dummy, or keeper vocal track while laying down the guitar tracks. I would be hapopy with 1 line out guitar, 1 condenser guitar mic and 1 vocal mic.( 3 tracks 2 guitar 1 vocal) As for my budget, I have been saving up for a long time and am returning my newly purchased Mbox2 $550.00 and thinking now of returning to the Presonus Firebox. I was wondering since I am not interested in the Qbase software that comes with the firebox, and since I can plug my M Audio controller keyboard directly into the Imac, I really don't require the midi capabilities of the Firebox and was looking into the less expensive Inspire. I am already into the cost of the Firebox, and it did work well for me, but I didn't hang on to it long enough to fully explore its capabilites. I would be happy to give the Firebox another try. If I did, would I need to install the Qbase software or could I just plug in the firebox and start recording? Thanks for your input. Much appreciated.
imac Mac OS X (10.4.5) For music creation only

Bought iPhone as "SIM-Free", but it not work with my local SIM card

I have bought iPhone Serial No: 82108W75A4T in Canada as "SIM-Free", but it not work with my local SIM (Orange in Israel) card. Where to check: it is or not Factory Unlocked or have any hardware/software problems or have carrier ("adhered" any phone company)

In the local Orange: They tried with them SIM, the same negative result.
I have addressed to Canadien phone wireless carriers.
From some [Rogers'] has already received the answer:
... have checked our system and did not find your iPhone listed... Please contact Apple...

Do SD card readers not work with 10.3?

I have an old G4 Power mac, and my kids have iMac G5s. We all run 10.3.9, and have SD card readers, and none of them work at all. Does Apple acknowledge that SD cards do not work with Macs, and/or was this fixed in 10.4? We are looking to replace our computers, and this is a deal breaker.

Okay, I did a little more research, and here's what I have found.
(Yes, I'm talking about a USB card reader.)
On my ancient G4 Mac, the 2GB card never mounts. I can see it with Disk Utility, but Disk Utility usually offers to format it. When I do this, it attempts to format it as a 1GB card, and fails.
However, I found an old 16MB card, and it mounts every time.
My kids both have a reader and a 2GB card for their iMacs. They usually mount okay, but not always. Sometimes it takes a restart.
The 2GB cards are all a funky off-brand, "Adata." The 16MB card is a Canon.
Now I am wondering if it's the cheap cards, or the capacity of the cards. I remember reading at one time that some Macs don't want to see removable drives over 1GB. This may be the problem with my computer. I just ordered a 1GB PQI card, we'll see how that does when it arrives.
My mac has both USB 1.1 and 2.0 slots. Same results on either bus.

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

I bought this iPhone from Apple Retail Store for the full amount, but it does not work with my SIM card only works with AT&T

Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best Wishes

When did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

BB8830 World EDition - Verizon - Not working with VODAFONE SIM card

Hi,
I bought BB8830 world edition from US to India. It works fine with Airtel Network. But its not working With Vodafone SIM card.
Option--security option-- Certificates-- Vodafone WLTS(x - red cross mark) is there. It expired on 2008.
Please let me know any one to find out solution for this. whether I need to updated the BB OS or how it works with vodafone SIM..
Please post the answer in [email protected] also.
Thanks in advance.

If the phone is unlocked, then contact Vodafone. They are the carrier you are trying to use, so only they can really help you.

Mainboard is not working with any cards except mine(GeForce2 MX400)!

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...

Quote
Originally posted by volkankarakus
Hi this is my PSU model and spesifications
SOLARMAX
Model:KC300 ATX
Input 115V/230V AC 50/60
Output 300W Max
+5V 20A +3,3V
+12V 12A -12V
+5VSB 1,5A -5V
Thanks!
Weak PSU is all I could say. 300watts can't even support a P4 stablely, not even to talk about combining a P4 to any new VGA cards... Get a better 400watts or more PSU with +3.3v at @ least 26A, +5v at @ least 35A and +12v at @ least 18A.

2 GB SD Card not working with Tiger

Similar Messages

Maybe you are looking for