2 Host 1 HBA
Hi All,
we have one HBA card and 2 Host (A5200). How can we make a loop from these things (without a switch)? I didn't find any docs (about exactly our problem).
Can anybody help me?
Thank you
J
You've always got a loop. To extend the loop to the second array, just make sure the first array has 2 GBICs, then wire it to the second array.
CARD /gbic -------- gbic1/array/gbic2 -------- gbic1/array
It gets more complex because you can have dual loops in the array, with dual ports....
For docs, I'd start here:
http://www.sun.com/products-n-solutions/hardware/docs/Network_Storage_Solutions/data_center_storage/a5000/index.html
I believe the 5200 is configured the same way as the 5000.
Darren
Similar Messages
-
Does anyone have any tips on how to present a FC SAN device on the host vm server to the guest vm servers?
This issue related to hardware of Oracle VM Servers installed on, please check hardware requirement in OVM 3.2.3 document again.
Best wishes,
Heng
Edited by: Vandy_Kh on Jun 3, 2013 7:46 PM -
How to obtain target WWN for a LUN On Windows 2012 R2 Hyper-V with Fibre Channel SAN
I have a large collection of Hyper-V hosts for which I would like to retrieve the target WNN and LUN ID for the LUNs visible on each host. By target WWN I mean the storage array's WWN.
I have tried using the root\wmi namespace to retrieve MS_SMHBA_PORT_LUN instances, but I get 0 instances back.
I get instances of MSFC_FibrePortHBAAttributes back, but those only tell me the local host's HBA WWN, not the target information.
This information must be stored somewhere, because you can't access the LUN without it, I hope there is a way to retrieve it. Is there? Or is it write only during LUN setup?
Hi,
Have you checked these two postings:
http://terrytlslau.tls1.cc/2011/08/how-to-find-world-wide-name-wwn-in.html
http://pkjayan.wordpress.com/2011/08/17/world-wide-name-wwn-for-a-fibre-channel-hba-on-windows-server/
You need the FCINFO tool, which you can get from:
http://www.microsoft.com/en-us/download/details.aspx?id=17530
Cheers
Andrew -
Urgent please help - brocade zoning and changing WWN
Hi all, we have had an issue with one of the devices on our SAN network, this means chaning the device, the engineer said we will need to change the name of the World wide name on the brocade to match. My question is, what is the WWN for? and do you assign it to one port, or a number of ports,and does a device that wants to talk to another device need to have the same WWN?
please help
cheers
CarlHi Carl,
I'm presuming that you are talking about having either a whole server replaced or you replaced a HBA (host bus adapter (fibre channel card in a server)).
A WWN (World Wide Number) is a unique identifier in the fibre channel space much like a MAC address. WWN's are used for security purposes generally to prevent/allow devices from seeing each other.
In that case, you will need to reconfigure any zones that were configured for that host/hba. A zone is a method of preventing devices from seeing each other on a fibre channel SAN (its kinda like an ACL).
You will most likely have to make some changes on any disk arrays because they generally would be configured to only allow certain hosts or HBA's to see certain LUN (Logical Unit (a slab of disk)). This is called LUN masking or sometimes called LUN security. -
Do we need to create two zones for Two HBA for a host connected with SAN ?
Hi,While creating Zone , Do we need to create two zones for Two HBA for a host connected with SAN ? Or a zone is enough for
a host which having Two HBAs...We have two 9124s for our SAN fabric...
As I found like one zone below, I little bit confused that , if a host having two HBA connected with SAN, should I expect two zones for every Host?
from the zone set, I gave the command show zoneset
zone name SQLSVR-X-NNN_CX4 vsan 1
pwwn 50:06:NN:NN:NN:NN:NN:NN
pwwn 50:06:NN:NN:NN:NN:NN:NN
pwwn 10:00:NN:NN:NN:NN:NN:NN
But I found only one zone for the server's HBA2:by the same time in the fabric I found switches A & B showing the WWNs of those HBAs on its
connected N port...Its not only for this server alone, but for all hosts..Can you help me to clarify on this please..that should we need to create one zone for
one HBA?if u have two independent fabrics between hosts and storage, i think the below confs are recommended.
Scenario 1: 2 HBAs single port each ( redundancy across HBA / Storage port )
HBA1 - port 0 ---------> Fabric A ----------> Storage port ( FAx/CLx )
HBA2 - port 0 ---------> Fabirc B ----------> Storage port ( FAy/CLy )
Scenario 2: 2 HBAs of dual port each
HBA1 - port 0 -------> Fabric A ---------> Storage port ( FAx/CLx )
HBA2 - port0 ---------> Fabric A ---------> Storage port ( FAs/CLs )
HBA1 - port 1 --------> Fabric A --------> Storage port ( FAy/CLy )
HBA2 - port 1 ---------> Fabric B --------> Storage port ( FAt/CLt )
the zone which is in your output is VSAN 1. if its a production VSAN, Cisco doesn't recomends to use VSAN 1 ( default vsan ) for production. -
Virtualbox Win7 guest VM runs 1-2 minutes then freezes host
I have a Windows 7 guest running on an Arch Linux host. It was created and ran perfectly for a long while on my old Lenovo Thinkpad T510, but when I moved it to my new W530, this problem started.
W530 Specifications
Processor: Intel Core i7-3740QM Processor (6M Cache, up to 3.70 GHz)
Operating System: Windows 8 64
Operating System Language: Windows 8 64 English
Display Type: 15.6" FHD (1920 x 1080) LED Backlit AntiGlare Display, Mobile Broadband Ready
System Graphics: NVIDIA Quadro K1000M Graphics with 2GB DDR3 Memory
Total Memory: 8 GB DDR3 - 1600MHz (2 DIMM)
Keyboard: Keyboard (Backlit) US English
Pointing Device: UltraNav with Fingerprint Reader for Color Sensor, Smart Card Reader
Camera: 720p HD Camera with Microphone
Hard Drive: 500GB Hard Disk Drive, 7200rpm
Optical Device: DVD Recordable 8x Max, Dual Layer, Ultrabay Enhanced w/ SW Royalty for Windows 8
System Expansion Slots: Express Card Slot & 4-in-1 Card Reader & Smart Card Reader
Battery: 9 Cell Li-Ion TWL 70++
Power Cord: 170W Slim AC Adapter - US (3pin)
Bluetooth: Bluetooth 4.0 with Antenna
Integrated WiFi Wireless LAN Adapters: Intel Centrino Ultimate-N 6300 AGN
Integrated Mobile Broadband: Mobile Broadband upgradable
Language Pack: Language Pack Win8 US English
I am a part of the vboxusers group:
groups matt
wheel vboxusers users
I am using the ck kernel in order to avoid an NVIDIA bug:
pacman -Q | grep '\-ck'
linux-ck-ivybridge 3.11.6-1
linux-ck-ivybridge-headers 3.11.6-1
nvidia-ck-ivybridge 325.15-8
virtualbox-ck-host-modules-ivybridge 4.3.2-1
VBox.log:
VirtualBox VM 4.3.2_OSE r90405 linux.amd64 (Nov 2 2013 00:37:14) release log
00:00:00.279529 Log opened 2013-11-04T08:49:54.581431000Z
00:00:00.279532 Build Type: release
00:00:00.279534 OS Product: Linux
00:00:00.279535 OS Release: 3.11.6-1-ck
00:00:00.279536 OS Version: #1 SMP PREEMPT Fri Oct 18 16:25:57 EDT 2013
00:00:00.279554 DMI Product Name: 2436CTO
00:00:00.279561 DMI Product Version: ThinkPad W530
00:00:00.279606 Host RAM: 15649MB total, 12841MB available
00:00:00.279609 Executable: /usr/lib/virtualbox/VirtualBox
00:00:00.279609 Process ID: 7535
00:00:00.279610 Package type: LINUX_64BITS_GENERIC (OSE)
00:00:00.284444 Installed Extension Packs:
00:00:00.284452 Oracle VM VirtualBox Extension Pack (Version: 4.3.2 r90405; VRDE Module: VBoxVRDP)
00:00:00.296684 Using XKB for keycode to scan code conversion
00:00:00.301989 SUP: Loaded VMMR0.r0 (/usr/lib/virtualbox/VMMR0.r0) at 0xffffffffa143b020 - ModuleInit at ffffffffa1457fa0 and ModuleTerm at ffffffffa1458240
00:00:00.302017 SUP: VMMR0EntryEx located at ffffffffa1459600, VMMR0EntryFast at ffffffffa1459220 and VMMR0EntryInt at ffffffffa1459210
00:00:00.302921 Guest OS type: 'Windows7_64'
00:00:00.304870 fHMForced=true - Lots of RAM
00:00:00.304880 fHMForced=true - SMP
00:00:00.304884 fHMForced=true - 64-bit guest
00:00:00.309262 File system of '/home/matt/VirtualBox VMs/cole/Snapshots' (snapshots) is ext4
00:00:00.309273 File system of '/home/matt/VirtualBox VMs/cole/cole-disk1_1.vmdk' is ext4
00:00:00.319009 Shared clipboard mode: Bidirectional
00:00:00.322978 Drag'n'drop mode: Off
00:00:00.337774 ************************* CFGM dump *************************
00:00:00.337780 [/] (level 0)
00:00:00.338180 CSAMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.338189 CpuExecutionCap <integer> = 0x0000000000000050 (80)
00:00:00.338191 EnablePAE <integer> = 0x0000000000000000 (0)
00:00:00.338192 HMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.338193 HMForced <integer> = 0x0000000000000001 (1)
00:00:00.338194 MemBalloonSize <integer> = 0x0000000000000000 (0)
00:00:00.338195 Name <string> = "cole" (cb=5)
00:00:00.338196 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.338197 PATMEnabled <integer> = 0x0000000000000001 (1)
00:00:00.338198 PageFusion <integer> = 0x0000000000000000 (0)
00:00:00.338199 RamHoleSize <integer> = 0x0000000020000000 (536 870 912, 512 MB)
00:00:00.338201 RamSize <integer> = 0x0000000200000000 (8 589 934 592, 8 GB)
00:00:00.338203 RawR0Enabled <integer> = 0x0000000000000001 (1)
00:00:00.338204 RawR3Enabled <integer> = 0x0000000000000001 (1)
00:00:00.338205 TimerMillies <integer> = 0x000000000000000a (10)
00:00:00.338206 UUID <bytes> = "78 cb 96 4e 9d 24 03 4c 8d 55 44 75 02 76 2c 93" (cb=16)
00:00:00.338211
00:00:00.338212 [/CPUM/] (level 1)
00:00:00.338213 SyntheticCpu <integer> = 0x0000000000000000 (0)
00:00:00.338214
00:00:00.338215 [/DBGF/] (level 1)
00:00:00.338215 Path <string> = "/home/matt/VirtualBox VMs/cole/debug/;/home/matt/VirtualBox VMs/cole/;/home/matt/" (cb=82)
00:00:00.338216
00:00:00.338217 [/Devices/] (level 1)
00:00:00.338217
00:00:00.338218 [/Devices/8237A/] (level 2)
00:00:00.338219
00:00:00.338219 [/Devices/8237A/0/] (level 3)
00:00:00.338220 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338220
00:00:00.338221 [/Devices/AudioSniffer/] (level 2)
00:00:00.338222
00:00:00.338222 [/Devices/AudioSniffer/0/] (level 3)
00:00:00.338223
00:00:00.338223 [/Devices/AudioSniffer/0/Config/] (level 4)
00:00:00.338225
00:00:00.338226 [/Devices/AudioSniffer/0/LUN#0/] (level 4)
00:00:00.338227 Driver <string> = "MainAudioSniffer" (cb=17)
00:00:00.338228
00:00:00.338228 [/Devices/AudioSniffer/0/LUN#0/Config/] (level 5)
00:00:00.338229 Object <integer> = 0x00007f43a40060f0 (139 928 491 024 624)
00:00:00.338231
00:00:00.338231 [/Devices/VMMDev/] (level 2)
00:00:00.338232
00:00:00.338233 [/Devices/VMMDev/0/] (level 3)
00:00:00.338235 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338236 PCIDeviceNo <integer> = 0x0000000000000004 (4)
00:00:00.338237 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338238 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338239
00:00:00.338240 [/Devices/VMMDev/0/Config/] (level 4)
00:00:00.338241 GuestCoreDumpDir <string> = "/home/matt/VirtualBox VMs/cole/Snapshots" (cb=41)
00:00:00.338242 RamSize <integer> = 0x0000000200000000 (8 589 934 592, 8 GB)
00:00:00.338243
00:00:00.338244 [/Devices/VMMDev/0/LUN#0/] (level 4)
00:00:00.338245 Driver <string> = "HGCM" (cb=5)
00:00:00.338245
00:00:00.338245 [/Devices/VMMDev/0/LUN#0/Config/] (level 5)
00:00:00.338246 Object <integer> = 0x00007f4384000930 (139 927 954 131 248)
00:00:00.338248
00:00:00.338248 [/Devices/VMMDev/0/LUN#999/] (level 4)
00:00:00.338250 Driver <string> = "MainStatus" (cb=11)
00:00:00.338251
00:00:00.338251 [/Devices/VMMDev/0/LUN#999/Config/] (level 5)
00:00:00.338253 First <integer> = 0x0000000000000000 (0)
00:00:00.338254 Last <integer> = 0x0000000000000000 (0)
00:00:00.338255 papLeds <integer> = 0x00007f43a40018b0 (139 928 491 006 128)
00:00:00.338257
00:00:00.338257 [/Devices/acpi/] (level 2)
00:00:00.338258
00:00:00.338258 [/Devices/acpi/0/] (level 3)
00:00:00.338259 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338261 PCIDeviceNo <integer> = 0x0000000000000007 (7)
00:00:00.338262 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338263 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338264
00:00:00.338264 [/Devices/acpi/0/Config/] (level 4)
00:00:00.338267 CpuHotPlug <integer> = 0x0000000000000000 (0)
00:00:00.338268 FdcEnabled <integer> = 0x0000000000000000 (0)
00:00:00.338270 HostBusPciAddress <integer> = 0x0000000000000000 (0)
00:00:00.338271 HpetEnabled <integer> = 0x0000000000000000 (0)
00:00:00.338272 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.338273 IocPciAddress <integer> = 0x0000000000010000 (65 536)
00:00:00.338274 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.338276 RamHoleSize <integer> = 0x0000000020000000 (536 870 912, 512 MB)
00:00:00.338278 RamSize <integer> = 0x0000000200000000 (8 589 934 592, 8 GB)
00:00:00.338279 Serial0IoPortBase <integer> = 0x0000000000000000 (0)
00:00:00.338280 Serial0Irq <integer> = 0x0000000000000000 (0)
00:00:00.338280 Serial1IoPortBase <integer> = 0x0000000000000000 (0)
00:00:00.338281 Serial1Irq <integer> = 0x0000000000000000 (0)
00:00:00.338282 ShowCpu <integer> = 0x0000000000000001 (1)
00:00:00.338282 ShowRtc <integer> = 0x0000000000000000 (0)
00:00:00.338283 SmcEnabled <integer> = 0x0000000000000000 (0)
00:00:00.338284
00:00:00.338284 [/Devices/acpi/0/LUN#0/] (level 4)
00:00:00.338285 Driver <string> = "ACPIHost" (cb=9)
00:00:00.338286
00:00:00.338286 [/Devices/acpi/0/LUN#0/Config/] (level 5)
00:00:00.338287
00:00:00.338287 [/Devices/acpi/0/LUN#1/] (level 4)
00:00:00.338288 Driver <string> = "ACPICpu" (cb=8)
00:00:00.338289
00:00:00.338289 [/Devices/acpi/0/LUN#1/Config/] (level 5)
00:00:00.338291
00:00:00.338292 [/Devices/acpi/0/LUN#2/] (level 4)
00:00:00.338293 Driver <string> = "ACPICpu" (cb=8)
00:00:00.338294
00:00:00.338294 [/Devices/acpi/0/LUN#2/Config/] (level 5)
00:00:00.338296
00:00:00.338296 [/Devices/acpi/0/LUN#3/] (level 4)
00:00:00.338298 Driver <string> = "ACPICpu" (cb=8)
00:00:00.338299
00:00:00.338299 [/Devices/acpi/0/LUN#3/Config/] (level 5)
00:00:00.338301
00:00:00.338301 [/Devices/ahci/] (level 2)
00:00:00.338302
00:00:00.338303 [/Devices/ahci/0/] (level 3)
00:00:00.338304 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338305 PCIDeviceNo <integer> = 0x000000000000000d (13)
00:00:00.338306 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338308 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338309
00:00:00.338309 [/Devices/ahci/0/Config/] (level 4)
00:00:00.338311 Bootable <integer> = 0x0000000000000001 (1)
00:00:00.338312 PortCount <integer> = 0x0000000000000001 (1)
00:00:00.338313
00:00:00.338314 [/Devices/ahci/0/Config/Port0/] (level 5)
00:00:00.338315 NonRotationalMedium <integer> = 0x0000000000000000 (0)
00:00:00.338315
00:00:00.338316 [/Devices/ahci/0/LUN#0/] (level 4)
00:00:00.338317 Driver <string> = "Block" (cb=6)
00:00:00.338317
00:00:00.338318 [/Devices/ahci/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.338319 Driver <string> = "VD" (cb=3)
00:00:00.338319
00:00:00.338320 [/Devices/ahci/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.338321 BlockCache <integer> = 0x0000000000000001 (1)
00:00:00.338322 Format <string> = "VMDK" (cb=5)
00:00:00.338322 Path <string> = "/home/matt/VirtualBox VMs/cole/cole-disk1_1.vmdk" (cb=49)
00:00:00.338324 Type <string> = "HardDisk" (cb=9)
00:00:00.338325 UseNewIo <integer> = 0x0000000000000001 (1)
00:00:00.338326
00:00:00.338326 [/Devices/ahci/0/LUN#0/Config/] (level 5)
00:00:00.338328 Mountable <integer> = 0x0000000000000000 (0)
00:00:00.338328 Type <string> = "HardDisk" (cb=9)
00:00:00.338329
00:00:00.338330 [/Devices/ahci/0/LUN#999/] (level 4)
00:00:00.338331 Driver <string> = "MainStatus" (cb=11)
00:00:00.338332
00:00:00.338333 [/Devices/ahci/0/LUN#999/Config/] (level 5)
00:00:00.338335 DeviceInstance <string> = "ahci/0" (cb=7)
00:00:00.338336 First <integer> = 0x0000000000000000 (0)
00:00:00.338337 Last <integer> = 0x0000000000000000 (0)
00:00:00.338338 pConsole <integer> = 0x00007f43a40012c0 (139 928 491 004 608)
00:00:00.338340 papLeds <integer> = 0x00007f43a40015e0 (139 928 491 005 408)
00:00:00.338342 pmapMediumAttachments <integer> = 0x00007f43a40018c8 (139 928 491 006 152)
00:00:00.338343
00:00:00.338344 [/Devices/apic/] (level 2)
00:00:00.338345
00:00:00.338346 [/Devices/apic/0/] (level 3)
00:00:00.338347 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338348
00:00:00.338349 [/Devices/apic/0/Config/] (level 4)
00:00:00.338350 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.338351 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.338352
00:00:00.338353 [/Devices/e1000/] (level 2)
00:00:00.338354
00:00:00.338354 [/Devices/e1000/0/] (level 3)
00:00:00.338356 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338357 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.338358 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338359 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338361
00:00:00.338361 [/Devices/e1000/0/Config/] (level 4)
00:00:00.338363 AdapterType <integer> = 0x0000000000000000 (0)
00:00:00.338364 CableConnected <integer> = 0x0000000000000001 (1)
00:00:00.338365 LineSpeed <integer> = 0x0000000000000000 (0)
00:00:00.338366 MAC <bytes> = "08 00 27 f8 64 23" (cb=6)
00:00:00.338368
00:00:00.338369 [/Devices/e1000/0/LUN#0/] (level 4)
00:00:00.338370 Driver <string> = "IntNet" (cb=7)
00:00:00.338370
00:00:00.338371 [/Devices/e1000/0/LUN#0/Config/] (level 5)
00:00:00.338372 IfPolicyPromisc <string> = "deny" (cb=5)
00:00:00.338373 IgnoreConnectFailure <integer> = 0x0000000000000000 (0)
00:00:00.338373 Network <string> = "HostInterfaceNetworking-enp0s25" (cb=32)
00:00:00.338374 Trunk <string> = "enp0s25" (cb=8)
00:00:00.338375 TrunkType <integer> = 0x0000000000000003 (3)
00:00:00.338376
00:00:00.338376 [/Devices/e1000/0/LUN#999/] (level 4)
00:00:00.338377 Driver <string> = "MainStatus" (cb=11)
00:00:00.338377
00:00:00.338378 [/Devices/e1000/0/LUN#999/Config/] (level 5)
00:00:00.338379 First <integer> = 0x0000000000000000 (0)
00:00:00.338380 Last <integer> = 0x0000000000000000 (0)
00:00:00.338380 papLeds <integer> = 0x00007f43a4001790 (139 928 491 005 840)
00:00:00.338381
00:00:00.338382 [/Devices/hda/] (level 2)
00:00:00.338382
00:00:00.338383 [/Devices/hda/0/] (level 3)
00:00:00.338384 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338385 PCIDeviceNo <integer> = 0x0000000000000005 (5)
00:00:00.338386 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338387 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338388
00:00:00.338389 [/Devices/hda/0/Config/] (level 4)
00:00:00.338390
00:00:00.338391 [/Devices/hda/0/LUN#0/] (level 4)
00:00:00.338392 Driver <string> = "AUDIO" (cb=6)
00:00:00.338393
00:00:00.338394 [/Devices/hda/0/LUN#0/Config/] (level 5)
00:00:00.338395 AudioDriver <string> = "pulse" (cb=6)
00:00:00.338395 StreamName <string> = "cole" (cb=5)
00:00:00.338396
00:00:00.338396 [/Devices/i8254/] (level 2)
00:00:00.338397
00:00:00.338397 [/Devices/i8254/0/] (level 3)
00:00:00.338398
00:00:00.338399 [/Devices/i8254/0/Config/] (level 4)
00:00:00.338401
00:00:00.338401 [/Devices/i8259/] (level 2)
00:00:00.338402
00:00:00.338402 [/Devices/i8259/0/] (level 3)
00:00:00.338404 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338405
00:00:00.338405 [/Devices/i8259/0/Config/] (level 4)
00:00:00.338407
00:00:00.338407 [/Devices/ioapic/] (level 2)
00:00:00.338409
00:00:00.338409 [/Devices/ioapic/0/] (level 3)
00:00:00.338410 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338411
00:00:00.338412 [/Devices/ioapic/0/Config/] (level 4)
00:00:00.338413 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.338414
00:00:00.338414 [/Devices/mc146818/] (level 2)
00:00:00.338415
00:00:00.338415 [/Devices/mc146818/0/] (level 3)
00:00:00.338416
00:00:00.338416 [/Devices/mc146818/0/Config/] (level 4)
00:00:00.338417 UseUTC <integer> = 0x0000000000000000 (0)
00:00:00.338418
00:00:00.338418 [/Devices/parallel/] (level 2)
00:00:00.338419
00:00:00.338419 [/Devices/pcarch/] (level 2)
00:00:00.338420
00:00:00.338420 [/Devices/pcarch/0/] (level 3)
00:00:00.338421 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338422
00:00:00.338422 [/Devices/pcarch/0/Config/] (level 4)
00:00:00.338423
00:00:00.338423 [/Devices/pcbios/] (level 2)
00:00:00.338424
00:00:00.338425 [/Devices/pcbios/0/] (level 3)
00:00:00.338425 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338426
00:00:00.338426 [/Devices/pcbios/0/Config/] (level 4)
00:00:00.338428 BootDevice0 <string> = "FLOPPY" (cb=7)
00:00:00.338429 BootDevice1 <string> = "DVD" (cb=4)
00:00:00.338429 BootDevice2 <string> = "IDE" (cb=4)
00:00:00.338430 BootDevice3 <string> = "NONE" (cb=5)
00:00:00.338431 FloppyDevice <string> = "i82078" (cb=7)
00:00:00.338432 HardDiskDevice <string> = "piix3ide" (cb=9)
00:00:00.338433 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.338434 LanBootRom <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/PXE-Intel.rom" (cb=85)
00:00:00.338436 McfgBase <integer> = 0x0000000000000000 (0)
00:00:00.338437 McfgLength <integer> = 0x0000000000000000 (0)
00:00:00.338438 NumCPUs <integer> = 0x0000000000000004 (4)
00:00:00.338439 PXEDebug <integer> = 0x0000000000000000 (0)
00:00:00.338440 RamHoleSize <integer> = 0x0000000020000000 (536 870 912, 512 MB)
00:00:00.338441 RamSize <integer> = 0x0000000200000000 (8 589 934 592, 8 GB)
00:00:00.338443 SataHardDiskDevice <string> = "ahci" (cb=5)
00:00:00.338443 SataLUN1 <integer> = 0x0000000000000000 (0)
00:00:00.338444 UUID <bytes> = "78 cb 96 4e 9d 24 03 4c 8d 55 44 75 02 76 2c 93" (cb=16)
00:00:00.338446
00:00:00.338447 [/Devices/pcbios/0/Config/NetBoot/] (level 5)
00:00:00.338448
00:00:00.338448 [/Devices/pcbios/0/Config/NetBoot/0/] (level 6)
00:00:00.338449 NIC <integer> = 0x0000000000000000 (0)
00:00:00.338450 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338451 PCIDeviceNo <integer> = 0x0000000000000003 (3)
00:00:00.338451 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338452
00:00:00.338453 [/Devices/pci/] (level 2)
00:00:00.338454
00:00:00.338455 [/Devices/pci/0/] (level 3)
00:00:00.338456 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338457
00:00:00.338458 [/Devices/pci/0/Config/] (level 4)
00:00:00.338459 IOAPIC <integer> = 0x0000000000000001 (1)
00:00:00.338460
00:00:00.338461 [/Devices/pckbd/] (level 2)
00:00:00.338461
00:00:00.338462 [/Devices/pckbd/0/] (level 3)
00:00:00.338463 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338463
00:00:00.338464 [/Devices/pckbd/0/Config/] (level 4)
00:00:00.338464
00:00:00.338465 [/Devices/pckbd/0/LUN#0/] (level 4)
00:00:00.338467 Driver <string> = "KeyboardQueue" (cb=14)
00:00:00.338467
00:00:00.338468 [/Devices/pckbd/0/LUN#0/AttachedDriver/] (level 5)
00:00:00.338470 Driver <string> = "MainKeyboard" (cb=13)
00:00:00.338470
00:00:00.338471 [/Devices/pckbd/0/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.338473 Object <integer> = 0x00007f43a400cbf0 (139 928 491 052 016)
00:00:00.338474
00:00:00.338475 [/Devices/pckbd/0/LUN#0/Config/] (level 5)
00:00:00.338477 QueueSize <integer> = 0x0000000000000040 (64)
00:00:00.338478
00:00:00.338479 [/Devices/pckbd/0/LUN#1/] (level 4)
00:00:00.338480 Driver <string> = "MouseQueue" (cb=11)
00:00:00.338481
00:00:00.338481 [/Devices/pckbd/0/LUN#1/AttachedDriver/] (level 5)
00:00:00.338482 Driver <string> = "MainMouse" (cb=10)
00:00:00.338483
00:00:00.338483 [/Devices/pckbd/0/LUN#1/AttachedDriver/Config/] (level 6)
00:00:00.338485 Object <integer> = 0x00007f43a400d9d0 (139 928 491 055 568)
00:00:00.338487
00:00:00.338487 [/Devices/pckbd/0/LUN#1/Config/] (level 5)
00:00:00.338489 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.338490
00:00:00.338490 [/Devices/pcnet/] (level 2)
00:00:00.338492
00:00:00.338492 [/Devices/piix3ide/] (level 2)
00:00:00.338493
00:00:00.338494 [/Devices/piix3ide/0/] (level 3)
00:00:00.338495 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338495 PCIDeviceNo <integer> = 0x0000000000000001 (1)
00:00:00.338496 PCIFunctionNo <integer> = 0x0000000000000001 (1)
00:00:00.338497 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338498
00:00:00.338499 [/Devices/piix3ide/0/Config/] (level 4)
00:00:00.338500 Type <string> = "PIIX4" (cb=6)
00:00:00.338501
00:00:00.338501 [/Devices/piix3ide/0/Config/SecondaryMaster/] (level 5)
00:00:00.338503 NonRotationalMedium <integer> = 0x0000000000000000 (0)
00:00:00.338504
00:00:00.338505 [/Devices/piix3ide/0/LUN#2/] (level 4)
00:00:00.338506 Driver <string> = "Block" (cb=6)
00:00:00.338507
00:00:00.338507 [/Devices/piix3ide/0/LUN#2/Config/] (level 5)
00:00:00.338509 Mountable <integer> = 0x0000000000000001 (1)
00:00:00.338510 Type <string> = "DVD" (cb=4)
00:00:00.338511
00:00:00.338511 [/Devices/piix3ide/0/LUN#999/] (level 4)
00:00:00.338513 Driver <string> = "MainStatus" (cb=11)
00:00:00.338514
00:00:00.338514 [/Devices/piix3ide/0/LUN#999/Config/] (level 5)
00:00:00.338516 DeviceInstance <string> = "piix3ide/0" (cb=11)
00:00:00.338517 First <integer> = 0x0000000000000000 (0)
00:00:00.338519 Last <integer> = 0x0000000000000003 (3)
00:00:00.338520 pConsole <integer> = 0x00007f43a40012c0 (139 928 491 004 608)
00:00:00.338522 papLeds <integer> = 0x00007f43a40015c0 (139 928 491 005 376)
00:00:00.338523 pmapMediumAttachments <integer> = 0x00007f43a40018c8 (139 928 491 006 152)
00:00:00.338524
00:00:00.338525 [/Devices/serial/] (level 2)
00:00:00.338525
00:00:00.338526 [/Devices/usb-ohci/] (level 2)
00:00:00.338527
00:00:00.338528 [/Devices/usb-ohci/0/] (level 3)
00:00:00.338529 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338530 PCIDeviceNo <integer> = 0x0000000000000006 (6)
00:00:00.338532 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338533 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338534
00:00:00.338534 [/Devices/usb-ohci/0/Config/] (level 4)
00:00:00.338536
00:00:00.338536 [/Devices/usb-ohci/0/LUN#0/] (level 4)
00:00:00.338538 Driver <string> = "VUSBRootHub" (cb=12)
00:00:00.338539
00:00:00.338539 [/Devices/usb-ohci/0/LUN#0/Config/] (level 5)
00:00:00.338541
00:00:00.338541 [/Devices/usb-ohci/0/LUN#999/] (level 4)
00:00:00.338542 Driver <string> = "MainStatus" (cb=11)
00:00:00.338543
00:00:00.338543 [/Devices/usb-ohci/0/LUN#999/Config/] (level 5)
00:00:00.338544 First <integer> = 0x0000000000000000 (0)
00:00:00.338545 Last <integer> = 0x0000000000000000 (0)
00:00:00.338546 papLeds <integer> = 0x00007f43a40018b8 (139 928 491 006 136)
00:00:00.338548
00:00:00.338548 [/Devices/vga/] (level 2)
00:00:00.338549
00:00:00.338550 [/Devices/vga/0/] (level 3)
00:00:00.338551 PCIBusNo <integer> = 0x0000000000000000 (0)
00:00:00.338553 PCIDeviceNo <integer> = 0x0000000000000002 (2)
00:00:00.338554 PCIFunctionNo <integer> = 0x0000000000000000 (0)
00:00:00.338554 Trusted <integer> = 0x0000000000000001 (1)
00:00:00.338555
00:00:00.338555 [/Devices/vga/0/Config/] (level 4)
00:00:00.338557 CustomVideoModes <integer> = 0x0000000000000000 (0)
00:00:00.338558 FadeIn <integer> = 0x0000000000000001 (1)
00:00:00.338559 FadeOut <integer> = 0x0000000000000001 (1)
00:00:00.338560 HeightReduction <integer> = 0x0000000000000000 (0)
00:00:00.338561 LogoFile <string> = "" (cb=1)
00:00:00.338562 LogoTime <integer> = 0x0000000000000000 (0)
00:00:00.338564 MonitorCount <integer> = 0x0000000000000001 (1)
00:00:00.338565 ShowBootMenu <integer> = 0x0000000000000002 (2)
00:00:00.338566 VRamSize <integer> = 0x0000000004000000 (67 108 864, 64 MB)
00:00:00.338568
00:00:00.338568 [/Devices/vga/0/LUN#0/] (level 4)
00:00:00.338570 Driver <string> = "MainDisplay" (cb=12)
00:00:00.338570
00:00:00.338571 [/Devices/vga/0/LUN#0/Config/] (level 5)
00:00:00.338572 Object <integer> = 0x00007f43a4001be0 (139 928 491 006 944)
00:00:00.338574
00:00:00.338574 [/Devices/virtio-net/] (level 2)
00:00:00.338575
00:00:00.338575 [/EM/] (level 1)
00:00:00.338576 TripleFaultReset <integer> = 0x0000000000000000 (0)
00:00:00.338577
00:00:00.338577 [/HM/] (level 1)
00:00:00.338578 64bitEnabled <integer> = 0x0000000000000001 (1)
00:00:00.338579 EnableLargePages <integer> = 0x0000000000000000 (0)
00:00:00.338580 EnableNestedPaging <integer> = 0x0000000000000001 (1)
00:00:00.338580 EnableUX <integer> = 0x0000000000000001 (1)
00:00:00.338581 EnableVPID <integer> = 0x0000000000000001 (1)
00:00:00.338582 Exclusive <integer> = 0x0000000000000001 (1)
00:00:00.338583
00:00:00.338583 [/MM/] (level 1)
00:00:00.338584 CanUseLargerHeap <integer> = 0x0000000000000000 (0)
00:00:00.338584
00:00:00.338584 [/PDM/] (level 1)
00:00:00.338585
00:00:00.338585 [/PDM/AsyncCompletion/] (level 2)
00:00:00.338586
00:00:00.338587 [/PDM/AsyncCompletion/File/] (level 3)
00:00:00.338587
00:00:00.338588 [/PDM/AsyncCompletion/File/BwGroups/] (level 4)
00:00:00.338589
00:00:00.338589 [/PDM/BlkCache/] (level 2)
00:00:00.338590 CacheSize <integer> = 0x0000000000500000 (5 242 880, 5 MB)
00:00:00.338592
00:00:00.338592 [/PDM/Devices/] (level 2)
00:00:00.338593
00:00:00.338594 [/PDM/Devices/VBoxEhci/] (level 3)
00:00:00.338595 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxEhciR3.so" (cb=97)
00:00:00.338596 R0SearchPath <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64" (cb=83)
00:00:00.338597 RCSearchPath <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64" (cb=83)
00:00:00.338598
00:00:00.338599 [/PDM/Devices/VBoxPciRaw/] (level 3)
00:00:00.338601 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxPciRawR3.so" (cb=99)
00:00:00.338601 R0SearchPath <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64" (cb=83)
00:00:00.338602
00:00:00.338602 [/PDM/Drivers/] (level 2)
00:00:00.338603
00:00:00.338603 [/PDM/Drivers/DrvHostWebcam/] (level 3)
00:00:00.338604 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxHostWebcam.so" (cb=101)
00:00:00.338605
00:00:00.338605 [/PDM/Drivers/VBoxC/] (level 3)
00:00:00.338606 Path <string> = "/usr/lib/virtualbox/components/VBoxC" (cb=37)
00:00:00.338607
00:00:00.338607 [/PDM/Drivers/VBoxPciRawDrv/] (level 3)
00:00:00.338608 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxPciRawDrv.so" (cb=100)
00:00:00.338609
00:00:00.338610 [/PDM/NetworkShaper/] (level 2)
00:00:00.338611
00:00:00.338611 [/PDM/NetworkShaper/BwGroups/] (level 3)
00:00:00.338613
00:00:00.338613 [/PDM/USB/] (level 2)
00:00:00.338614
00:00:00.338615 [/PDM/USB/VBoxUsbCardReader/] (level 3)
00:00:00.338617 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxUsbCardReaderR3.so" (cb=106)
00:00:00.338617
00:00:00.338617 [/PDM/USB/VBoxUsbWebcam/] (level 3)
00:00:00.338618 Path <string> = "/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/linux.amd64/VBoxUsbWebcamR3.so" (cb=102)
00:00:00.338619
00:00:00.338619 [/TM/] (level 1)
00:00:00.338620 UTCOffset <integer> = 0x0000000000000000 (0)
00:00:00.338621
00:00:00.338621 [/USB/] (level 1)
00:00:00.338622
00:00:00.338623 [/USB/HidMouse/] (level 2)
00:00:00.338624
00:00:00.338624 [/USB/HidMouse/1/] (level 3)
00:00:00.338626
00:00:00.338626 [/USB/HidMouse/1/Config/] (level 4)
00:00:00.338628 Mode <string> = "absolute" (cb=9)
00:00:00.338629
00:00:00.338629 [/USB/HidMouse/1/LUN#0/] (level 4)
00:00:00.338630 Driver <string> = "MouseQueue" (cb=11)
00:00:00.338631
00:00:00.338632 [/USB/HidMouse/1/LUN#0/AttachedDriver/] (level 5)
00:00:00.338634 Driver <string> = "MainMouse" (cb=10)
00:00:00.338635
00:00:00.338636 [/USB/HidMouse/1/LUN#0/AttachedDriver/Config/] (level 6)
00:00:00.338637 Object <integer> = 0x00007f43a400d9d0 (139 928 491 055 568)
00:00:00.338638
00:00:00.338639 [/USB/HidMouse/1/LUN#0/Config/] (level 5)
00:00:00.338640 QueueSize <integer> = 0x0000000000000080 (128)
00:00:00.338640
00:00:00.338641 [/USB/USBProxy/] (level 2)
00:00:00.338641
00:00:00.338642 [/USB/USBProxy/GlobalConfig/] (level 3)
00:00:00.338643
00:00:00.338643 ********************* End of CFGM dump **********************
00:00:00.338648 VM: fHMEnabled=true (configured) fRecompileUser=false fRecompileSupervisor=false
00:00:00.338651 VM: fRawRing1Enabled=false CSAM=true PATM=true
00:00:00.339710 HMR3Init: VT-x w/ nested paging
00:00:00.339764 MM: cbHyperHeap=0x140000 (1310720)
00:00:00.343632 Debug: HCPhysInterPD=000000007fc90000 HCPhysInterPaePDPT=000000007fc93000 HCPhysInterPaePML4=000000007fc95000
00:00:00.343652 Debug: apInterPTs={000000007fc91000,000000007fc92000} apInterPaePTs={000000032883b000,00000003badf0000} apInterPaePDs={00000003badf1000,00000003b5ef4000,00000003b5ef5000,000000032883e000} pInterPaePDPT64=000000007fc94000
00:00:00.343660 Host paging mode: AMD64+PGE+NX
00:00:00.343665 PGMPool: cMaxPages=4144 (u64MaxPages=4136)
00:00:00.343668 pgmR3PoolInit: cMaxPages=0x1030 cMaxUsers=0x2060 cMaxPhysExts=0x2000 fCacheEnable=true
00:00:00.393965 TM: GIP - u32Mode=1 (SyncTSC) u32UpdateHz=100
00:00:00.426139 TM: cTSCTicksPerSecond=0xa0dfd428 (2 699 023 400) fTSCVirtualized=true fTSCUseRealTSC=false
00:00:00.426152 TM: fMaybeUseOffsettedHostTSC=false TSCTiedToExecution=false TSCNotTiedToHalt=false
00:00:00.426904 CoreCode: R3=00007f43c47e1000 R0=ffffc90004128000 RC=a1041000 Phys=00000000c551b000 cb=0x1000
00:00:00.427071 AIOMgr: Default manager type is "Async"
00:00:00.427078 AIOMgr: Default file backend is "NonBuffered"
00:00:00.427141 BlkCache: Cache successfully initialised. Cache size is 5242880 bytes
00:00:00.427147 BlkCache: Cache commit interval is 10000 ms
00:00:00.427151 BlkCache: Cache commit threshold is 2621440 bytes
00:00:00.438466 [SMP] BIOS with 4 CPUs
00:00:00.439354 DevPcBios: Using LAN ROM '/usr/lib/virtualbox/ExtensionPacks/Oracle_VM_VirtualBox_Extension_Pack/PXE-Intel.rom' with a size of 0xc000 bytes
00:00:00.443471 SUP: Loaded VBoxDDR0.r0 (/usr/lib/virtualbox/VBoxDDR0.r0) at 0xffffffffa0045020 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.445128 SUP: Loaded VBoxDD2R0.r0 (/usr/lib/virtualbox/VBoxDD2R0.r0) at 0xffffffffa0063020 - ModuleInit at 0000000000000000 and ModuleTerm at 0000000000000000
00:00:00.445150 Activating Local APIC
00:00:00.445159 CPUM: SetGuestCpuIdFeature: Enabled APIC
00:00:00.445516 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.447969 Shared Folders service loaded.
00:00:00.463779 Chipset cannot do MSI: VERR_NOT_IMPLEMENTED
00:00:00.463930 DrvBlock: Flushes will be ignored
00:00:00.463936 DrvBlock: Async flushes will be passed to the disk
00:00:00.464515 VDInit finished
00:00:00.464605 AIOMgr: Endpoint for file '/home/matt/VirtualBox VMs/cole/cole-disk1_1.vmdk' (flags 000c0723) created successfully
00:00:00.602201 AIOMgr: Flush failed with VERR_INVALID_PARAMETER, disabling async flushes
00:00:00.602304 VD: Opening the disk took 138345011 ns
00:00:00.602376 AHCI: LUN#0: disk, PCHS=16383/16/63, total number of sectors 629145600
00:00:00.602406 AHCI: LUN#0: using async I/O
00:00:00.602560 AHCI#0: Reset the HBA
00:00:00.602749 PIIX3 ATA: LUN#0: no unit
00:00:00.602760 PIIX3 ATA: LUN#1: no unit
00:00:00.602797 DrvBlock: Flushes will be ignored
00:00:00.602804 DrvBlock: Async flushes will be passed to the disk
00:00:00.602904 PIIX3 ATA: LUN#2: CD/DVD, total number of sectors 0, passthrough disabled
00:00:00.602927 PIIX3 ATA: LUN#3: no unit
00:00:00.602950 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:00.602972 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:00.603098 IntNet#0: szNetwork={HostInterfaceNetworking-enp0s25} enmTrunkType=3 szTrunk={enp0s25} fFlags=0x8000 cbRecv=325632 cbSend=196608 fIgnoreConnectFailure=false
00:00:00.603650 Chipset cannot do MSI: VERR_NOT_IMPLEMENTED
00:00:00.603683 Audio: Trying driver 'pulse'.
00:00:00.607137 Pulse: open PCM_IN rate=44100Hz channels=2 format=s16le
00:00:00.607159 Pulse: Requested record buffer attributes: maxlength=26460 fragsize=17640
00:00:00.608218 Pulse: Obtained record buffer attributes: maxlength=26460 fragsize=8820
00:00:00.608315 HdaCodec: can't open in fmt(freq: 44100)
00:00:00.608329 Pulse: open PCM_OUT rate=44100Hz channels=2 format=s16le
00:00:00.608340 Pulse: Requested playback buffer attributes: maxlength=26460 tlength=17640 prebuf=-1 minreq=-1
00:00:00.680651 Pulse: Obtained playback buffer attributes: maxlength=26460 tlength=12348 prebuf=8824 minreq=3528
00:00:00.680711 HdaCodec: can't open out fmt(freq: 44100)
00:00:00.681169 VUSB: attached 'HidMouse' to port 1
00:00:00.683638 DevPcBios: SATA LUN#0 LCHS=1024/255/63
00:00:00.683781 PGM: The CPU physical address width is 36 bits
00:00:00.683791 PGMR3InitFinalize: 4 MB PSE mask 0000000fffffffff
00:00:00.687349 VMM: Thread-context hooks enabled!
00:00:00.687434 HM: Using VT-x implementation 2.0!
00:00:00.687435 HM: Host CR4 = 0x1407e0
00:00:00.687438 HM: Host EFER = 0xd01
00:00:00.687439 HM: MSR_IA32_FEATURE_CONTROL = 0x5
00:00:00.687442 HM: MSR_IA32_VMX_BASIC_INFO = 0xda040000000010
00:00:00.687444 HM: VMCS id = 0x10
00:00:00.687446 HM: VMCS size = 1024 bytes
00:00:00.687447 HM: VMCS physical address limit = None
00:00:00.687448 HM: VMCS memory type = 0x6
00:00:00.687449 HM: Dual-monitor treatment support = true
00:00:00.687450 HM: OUTS & INS instruction-info = true
00:00:00.687451 HM: Max resume loops = 8192
00:00:00.687452 HM: MSR_IA32_VMX_PINBASED_CTLS = 0x7f00000016
00:00:00.687454 HM: VMX_VMCS_CTRL_PIN_EXEC_EXT_INT_EXIT
00:00:00.687456 HM: VMX_VMCS_CTRL_PIN_EXEC_NMI_EXIT
00:00:00.687457 HM: VMX_VMCS_CTRL_PIN_EXEC_VIRTUAL_NMI
00:00:00.687457 HM: VMX_VMCS_CTRL_PIN_EXEC_PREEMPT_TIMER
00:00:00.687460 HM: MSR_IA32_VMX_PROCBASED_CTLS = 0xfff9fffe0401e172
00:00:00.687461 HM: VMX_VMCS_CTRL_PROC_EXEC_INT_WINDOW_EXIT
00:00:00.687462 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_TSC_OFFSETTING
00:00:00.687463 HM: VMX_VMCS_CTRL_PROC_EXEC_HLT_EXIT
00:00:00.687463 HM: VMX_VMCS_CTRL_PROC_EXEC_INVLPG_EXIT
00:00:00.687464 HM: VMX_VMCS_CTRL_PROC_EXEC_MWAIT_EXIT
00:00:00.687465 HM: VMX_VMCS_CTRL_PROC_EXEC_RDPMC_EXIT
00:00:00.687466 HM: VMX_VMCS_CTRL_PROC_EXEC_RDTSC_EXIT
00:00:00.687467 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_LOAD_EXIT
00:00:00.687469 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_LOAD_EXIT (must be set)
00:00:00.687470 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_STORE_EXIT
00:00:00.687470 HM: VMX_VMCS_CTRL_PROC_EXEC_CR3_STORE_EXIT (must be set)
00:00:00.687471 HM: VMX_VMCS_CTRL_PROC_EXEC_CR8_LOAD_EXIT
00:00:00.687471 HM: VMX_VMCS_CTRL_PROC_EXEC_CR8_STORE_EXIT
00:00:00.687472 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_TPR_SHADOW
00:00:00.687472 HM: VMX_VMCS_CTRL_PROC_EXEC_NMI_WINDOW_EXIT
00:00:00.687473 HM: VMX_VMCS_CTRL_PROC_EXEC_MOV_DR_EXIT
00:00:00.687473 HM: VMX_VMCS_CTRL_PROC_EXEC_UNCOND_IO_EXIT
00:00:00.687474 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_IO_BITMAPS
00:00:00.687474 HM: VMX_VMCS_CTRL_PROC_EXEC_MONITOR_TRAP_FLAG
00:00:00.687476 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_MSR_BITMAPS
00:00:00.687476 HM: VMX_VMCS_CTRL_PROC_EXEC_MONITOR_EXIT
00:00:00.687477 HM: VMX_VMCS_CTRL_PROC_EXEC_PAUSE_EXIT
00:00:00.687477 HM: VMX_VMCS_CTRL_PROC_EXEC_USE_SECONDARY_EXEC_CTRL
00:00:00.687478 HM: MSR_IA32_VMX_PROCBASED_CTLS2 = 0x8ff00000000
00:00:00.687479 HM: VMX_VMCS_CTRL_PROC_EXEC2_VIRT_APIC
00:00:00.687480 HM: VMX_VMCS_CTRL_PROC_EXEC2_EPT
00:00:00.687480 HM: VMX_VMCS_CTRL_PROC_EXEC2_DESCRIPTOR_TABLE_EXIT
00:00:00.687481 HM: VMX_VMCS_CTRL_PROC_EXEC2_RDTSCP
00:00:00.687481 HM: VMX_VMCS_CTRL_PROC_EXEC2_VIRT_X2APIC
00:00:00.687482 HM: VMX_VMCS_CTRL_PROC_EXEC2_VPID
00:00:00.687482 HM: VMX_VMCS_CTRL_PROC_EXEC2_WBINVD_EXIT
00:00:00.687483 HM: VMX_VMCS_CTRL_PROC_EXEC2_UNRESTRICTED_GUEST
00:00:00.687483 HM: VMX_VMCS_CTRL_PROC_EXEC2_PAUSE_LOOP_EXIT (must be cleared)
00:00:00.687484 HM: VMX_VMCS_CTRL_PROC_EXEC2_RDRAND_EXIT
00:00:00.687484 HM: VMX_VMCS_CTRL_PROC_EXEC2_INVPCID (must be cleared)
00:00:00.687485 HM: VMX_VMCS_CTRL_PROC_EXEC2_VMFUNC (must be cleared)
00:00:00.687485 HM: MSR_IA32_VMX_ENTRY_CTLS = 0xffff000011ff
00:00:00.687486 HM: VMX_VMCS_CTRL_ENTRY_LOAD_DEBUG
00:00:00.687487 HM: VMX_VMCS_CTRL_ENTRY_LOAD_DEBUG (must be set)
00:00:00.687487 HM: VMX_VMCS_CTRL_ENTRY_IA32E_MODE_GUEST
00:00:00.687488 HM: VMX_VMCS_CTRL_ENTRY_ENTRY_SMM
00:00:00.687488 HM: VMX_VMCS_CTRL_ENTRY_DEACTIVATE_DUALMON
00:00:00.687488 HM: VMX_VMCS_CTRL_ENTRY_LOAD_GUEST_PERF_MSR
00:00:00.687489 HM: VMX_VMCS_CTRL_ENTRY_LOAD_GUEST_PAT_MSR
00:00:00.687499 HM: VMX_VMCS_CTRL_ENTRY_LOAD_GUEST_EFER_MSR
00:00:00.687500 HM: MSR_IA32_VMX_EXIT_CTLS = 0x7fffff00036dff
00:00:00.687501 HM: VMX_VMCS_CTRL_EXIT_SAVE_DEBUG
00:00:00.687501 HM: VMX_VMCS_CTRL_EXIT_SAVE_DEBUG (must be set)
00:00:00.687502 HM: VMX_VMCS_CTRL_EXIT_HOST_ADDR_SPACE_SIZE
00:00:00.687503 HM: VMX_VMCS_CTRL_EXIT_LOAD_PERF_MSR
00:00:00.687503 HM: VMX_VMCS_CTRL_EXIT_ACK_EXT_INT
00:00:00.687503 HM: VMX_VMCS_CTRL_EXIT_SAVE_GUEST_PAT_MSR
00:00:00.687504 HM: VMX_VMCS_CTRL_EXIT_LOAD_HOST_PAT_MSR
00:00:00.687504 HM: VMX_VMCS_CTRL_EXIT_SAVE_GUEST_EFER_MSR
00:00:00.687505 HM: VMX_VMCS_CTRL_EXIT_LOAD_HOST_EFER_MSR
00:00:00.687505 HM: VMX_VMCS_CTRL_EXIT_SAVE_VMX_PREEMPT_TIMER
00:00:00.687506 HM: MSR_IA32_VMX_EPT_VPID_CAP = 0xf0106114141
00:00:00.687507 HM: MSR_IA32_VMX_EPT_VPID_CAP_RWX_X_ONLY
00:00:00.687508 HM: MSR_IA32_VMX_EPT_VPID_CAP_GAW_48_BITS
00:00:00.687508 HM: MSR_IA32_VMX_EPT_VPID_CAP_EMT_UC
00:00:00.687509 HM: MSR_IA32_VMX_EPT_VPID_CAP_EMT_WB
00:00:00.687509 HM: MSR_IA32_VMX_EPT_VPID_CAP_SP_21_BITS
00:00:00.687510 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVEPT
00:00:00.687510 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVEPT_SINGLE_CONTEXT
00:00:00.687511 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVEPT_ALL_CONTEXTS
00:00:00.687511 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID
00:00:00.687512 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_INDIV_ADDR
00:00:00.687512 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_SINGLE_CONTEXT
00:00:00.687513 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_ALL_CONTEXTS
00:00:00.687513 HM: MSR_IA32_VMX_EPT_VPID_CAP_INVVPID_SINGLE_CONTEXT_RETAIN_GLOBALS
00:00:00.687514 HM: MSR_IA32_VMX_MISC = 0x100401e5
00:00:00.687515 HM: MSR_IA32_VMX_MISC_PREEMPT_TSC_BIT = 0x5
00:00:00.687515 HM: MSR_IA32_VMX_MISC_STORE_EFERLMA_VMEXIT = true
00:00:00.687516 HM: MSR_IA32_VMX_MISC_ACTIVITY_STATES = 0x7
00:00:00.687517 HM: MSR_IA32_VMX_MISC_CR3_TARGET = 0x4
00:00:00.687517 HM: MSR_IA32_VMX_MISC_MAX_MSR = 512
00:00:00.687518 HM: MSR_IA32_VMX_MISC_RDMSR_SMBASE_MSR_SMM = false
00:00:00.687518 HM: MSR_IA32_VMX_MISC_SMM_MONITOR_CTL_B2 = true
00:00:00.687519 HM: MSR_IA32_VMX_MISC_VMWRITE_VMEXIT_INFO = false
00:00:00.687520 HM: MSR_IA32_VMX_MISC_MSEG_ID = 0x0
00:00:00.687520 HM: MSR_IA32_VMX_CR0_FIXED0 = 0x80000021
00:00:00.687521 HM: MSR_IA32_VMX_CR0_FIXED1 = 0xffffffff
00:00:00.687522 HM: MSR_IA32_VMX_CR4_FIXED0 = 0x2000
00:00:00.687523 HM: MSR_IA32_VMX_CR4_FIXED1 = 0x1767ff
00:00:00.687524 HM: MSR_IA32_VMX_VMCS_ENUM = 0x2a
00:00:00.687524 HM: MSR_IA32_VMX_VMCS_ENUM_HIGHEST_INDEX = 0x15
00:00:00.687525 HM: APIC-access page physaddr = 0x00000000c553a000
00:00:00.687528 HM: VCPU 0: MSR bitmap physaddr = 0x00000000c553d000
00:00:00.687529 HM: VCPU 0: VMCS physaddr = 0x00000000c553b000
00:00:00.687530 HM: VCPU 1: MSR bitmap physaddr = 0x00000000c5542000
00:00:00.687531 HM: VCPU 1: VMCS physaddr = 0x00000000c5540000
00:00:00.687532 HM: VCPU 2: MSR bitmap physaddr = 0x00000000c5547000
00:00:00.687533 HM: VCPU 2: VMCS physaddr = 0x00000000c5545000
00:00:00.687533 HM: VCPU 3: MSR bitmap physaddr = 0x00000000c554c000
00:00:00.687534 HM: VCPU 3: VMCS physaddr = 0x00000000c554a000
00:00:00.687535 HM: Guest support: 32-bit and 64-bit.
00:00:00.687540 HM: VMX enabled!
00:00:00.687549 CPUM: SetGuestCpuIdFeature: Enabled SYSENTER/EXIT
00:00:00.687550 CPUM: SetGuestCpuIdFeature: Enabled PAE
00:00:00.687550 CPUM: SetGuestCpuIdFeature: Enabled LONG MODE
00:00:00.687551 CPUM: SetGuestCpuIdFeature: Enabled SYSCALL/RET
00:00:00.687552 CPUM: SetGuestCpuIdFeature: Enabled LAHF/SAHF
00:00:00.687552 CPUM: SetGuestCpuIdFeature: Enabled NX
00:00:00.687553 HM: Nested paging enabled!
00:00:00.687553 HM: EPT flush type = VMX_FLUSH_EPT_SINGLE_CONTEXT
00:00:00.687554 HM: Unrestricted guest execution enabled!
00:00:00.687554 HM: VPID enabled!
00:00:00.687555 HM: VPID flush type = VMX_FLUSH_VPID_SINGLE_CONTEXT
00:00:00.687557 HM: VMX-preemption timer enabled (cPreemptTimerShift=5).
00:00:00.687558 HM: VT-x/AMD-V init method: GLOBAL
00:00:00.687559 VMM: fUsePeriodicPreemptionTimers=false
00:00:00.688299 Logical host processors: 8 present, 8 max, 8 online, online mask: 00000000000000ff
00:00:00.688363 Physical host cores: 4
00:00:00.688363 ************************* CPUID dump ************************
00:00:00.688369 RAW Standard CPUIDs
00:00:00.688370 Function eax ebx ecx edx
00:00:00.688370 Gst: 00000000 00000005 756e6547 6c65746e 49656e69
00:00:00.688372 Hst: 0000000d 756e6547 6c65746e 49656e69
00:00:00.688374 Gst: 00000001 000306a9 00040800 00000201 178bfbff
00:00:00.688375 Hst: 000306a9 01100800 7fbae3ff bfebfbff
00:00:00.688376 Gst: 00000002 76035a01 00f0b2ff 00000000 00ca0000
00:00:00.688378 Hst: 76035a01 00f0b2ff 00000000 00ca0000
00:00:00.688379 Gst: 00000003 00000000 00000000 00000000 00000000
00:00:00.688380 Hst: 00000000 00000000 00000000 00000000
00:00:00.688381 Gst: 00000004 0c000000 00000000 00000000 00000000
00:00:00.688382 Hst: 1c004121 01c0003f 0000003f 00000000
00:00:00.688383 Gst: 00000005 00000000 00000000 00000000 00000000
00:00:00.688384 Hst: 00000040 00000040 00000003 00021120
00:00:00.688385 Hst: 00000006 00000077 00000002 00000009 00000000
00:00:00.688386 Hst: 00000007 00000000 00000281 00000000 00000000
00:00:00.688387 Hst: 00000008 00000000 00000000 00000000 00000000
00:00:00.688388 Hst: 00000009 00000000 00000000 00000000 00000000
00:00:00.688389 Hst: 0000000a 07300403 00000000 00000000 00000603
00:00:00.688390 Hst: 0000000b 00000001 00000002 00000100 00000001
00:00:00.688391 Hst: 0000000c 00000000 00000000 00000000 00000000
00:00:00.688392 Hst: 0000000d 00000007 00000340 00000340 00000000
00:00:00.688393 Name: GenuineIntel
00:00:00.688394 Supports: 0-5
00:00:00.688397 Family: 6 Extended: 0 Effective: 6
00:00:00.688398 Model: 10 Extended: 3 Effective: 58
00:00:00.688399 Stepping: 9
00:00:00.688399 Type: 0 (primary)
00:00:00.688400 APIC ID: 0x00
00:00:00.688401 Logical CPUs: 4
00:00:00.688401 CLFLUSH Size: 8
00:00:00.688402 Brand ID: 0x00
00:00:00.688403 Mnemonic - Description = guest (host)
00:00:00.688403 FPU - x87 FPU on Chip = 1 (1)
00:00:00.688404 VME - Virtual 8086 Mode Enhancements = 1 (1)
00:00:00.688405 DE - Debugging extensions = 1 (1)
00:00:00.688405 PSE - Page Size Extension = 1 (1)
00:00:00.688406 TSC - Time Stamp Counter = 1 (1)
00:00:00.688407 MSR - Model Specific Registers = 1 (1)
00:00:00.688407 PAE - Physical Address Extension = 1 (1)
00:00:00.688408 MCE - Machine Check Exception = 1 (1)
00:00:00.688408 CX8 - CMPXCHG8B instruction = 1 (1)
00:00:00.688409 APIC - APIC On-Chip = 1 (1)
00:00:00.688410 10 - Reserved = 0 (0)
00:00:00.688410 SEP - SYSENTER and SYSEXIT = 1 (1)
00:00:00.688411 MTRR - Memory Type Range Registers = 1 (1)
00:00:00.688411 PGE - PTE Global Bit = 1 (1)
00:00:00.688412 MCA - Machine Check Architecture = 1 (1)
00:00:00.688413 CMOV - Conditional Move Instructions = 1 (1)
00:00:00.688413 PAT - Page Attribute Table = 1 (1)
00:00:00.688414 PSE-36 - 36-bit Page Size Extention = 1 (1)
00:00:00.688414 PSN - Processor Serial Number = 0 (0)
00:00:00.688415 CLFSH - CLFLUSH Instruction. = 1 (1)
00:00:00.688416 20 - Reserved = 0 (0)
00:00:00.688416 DS - Debug Store = 0 (1)
00:00:00.688417 ACPI - Thermal Mon. & Soft. Clock Ctrl.= 0 (1)
00:00:00.688417 MMX - Intel MMX Technology = 1 (1)
00:00:00.688418 FXSR - FXSAVE and FXRSTOR Instructions = 1 (1)
00:00:00.688419 SSE - SSE Support = 1 (1)
00:00:00.688419 SSE2 - SSE2 Support = 1 (1)
00:00:00.688420 SS - Self Snoop = 0 (1)
00:00:00.688420 HTT - Hyper-Threading Technology = 1 (1)
00:00:00.688421 TM - Thermal Monitor = 0 (1)
00:00:00.688422 30 - Reserved = 0 (0)
00:00:00.688422 PBE - Pending Break Enable = 0 (1)
00:00:00.688423 Supports SSE3 = 1 (1)
00:00:00.688423 PCLMULQDQ = 0 (1)
00:00:00.688424 DS Area 64-bit layout = 0 (1)
00:00:00.688425 Supports MONITOR/MWAIT = 0 (1)
00:00:00.688425 CPL-DS - CPL Qualified Debug Store = 0 (1)
00:00:00.688426 VMX - Virtual Machine Technology = 0 (1)
00:00:00.688426 SMX - Safer Mode Extensions = 0 (1)
00:00:00.688427 Enhanced SpeedStep Technology = 0 (1)
00:00:00.688428 Terminal Monitor 2 = 0 (1)
00:00:00.688428 Supplemental SSE3 instructions = 1 (1)
00:00:00.688429 L1 Context ID = 0 (0)
00:00:00.688429 11 - Reserved = 0 (0)
00:00:00.688430 FMA extensions using YMM state = 0 (0)
00:00:00.688431 CMPXCHG16B instruction = 0 (1)
00:00:00.688431 xTPR Update Control = 0 (1)
00:00:00.688432 Perf/Debug Capability MSR = 0 (1)
00:00:00.688432 16 - Reserved = 0 (0)
00:00:00.688433 PCID - Process-context identifiers = 0 (1)
00:00:00.688434 DCA - Direct Cache Access = 0 (0)
00:00:00.688434 SSE4.1 instruction extensions = 0 (1)
00:00:00.688435 SSE4.2 instruction extensions = 0 (1)
00:00:00.688435 Supports the x2APIC extensions = 0 (1)
00:00:00.688437 MOVBE instruction = 0 (0)
00:00:00.688437 POPCNT instruction = 0 (1)
00:00:00.688438 TSC-Deadline LAPIC timer mode = 0 (1)
00:00:00.688439 AESNI instruction extensions = 0 (1)
00:00:00.688439 XSAVE/XRSTOR extended state feature = 0 (1)
00:00:00.688440 Supports OSXSAVE = 0 (1)
00:00:00.688440 AVX instruction extensions = 0 (1)
00:00:00.688441 29/30 - Reserved = 0x0 (0x3)
00:00:00.688442 Hypervisor Present (we're a guest) = 0 (0)
00:00:00.688442
00:00:00.688443 RAW Extended CPUIDs
00:00:00.688443 Function eax ebx ecx edx
00:00:00.688444 Gst: 80000000 80000008 00000000 00000000 00000000
00:00:00.688445 Hst: 80000008 00000000 00000000 00000000
00:00:00.688446 Gst: 80000001 00000000 00000000 00000001 28100800
00:00:00.688447 Hst: 00000000 00000000 00000001 28100800
00:00:00.688449 Gst: 80000002 20202020 6e492020 286c6574 43202952
00:00:00.688450 Hst: 20202020 6e492020 286c6574 43202952
00:00:00.688452 Gst: 80000003 2865726f 20294d54 332d3769 51303437
00:00:00.688454 Hst: 2865726f 20294d54 332d3769 51303437
00:00:00.688455 Gst: 80000004 5043204d 20402055 30372e32 007a4847
00:00:00.688457 Hst: 5043204d 20402055 30372e32 007a4847
00:00:00.688458 Gst: 80000005 00000000 00000000 00000000 00000000
00:00:00.688459 Hst: 00000000 00000000 00000000 00000000
00:00:00.688460 Gst: 80000006 00000000 00000000 01006040 00000000
00:00:00.688461 Hst: 00000000 00000000 01006040 00000000
00:00:00.688462 Gst: 80000007 00000000 00000000 00000000 00000000
00:00:00.688463 Hst: 00000000 00000000 00000000 00000100
00:00:00.688464 Gst: 80000008 00003024 00000000 00000000 00000000
00:00:00.688465 Hst: 00003024 00000000 00000000 00000000
00:00:00.688466 Gst: 80000009 00000007 00000340 00000340 00000000*
00:00:00.688467 Hst: 00000007 00000340 00000340 00000000
00:00:00.688468 Ext Name:
00:00:00.688469 Ext Supports: 0x80000000-0x80000008
00:00:00.688470 Family: 0 Extended: 0 Effective: 0
00:00:00.688470 Model: 0 Extended: 0 Effective: 0
00:00:00.688471 Stepping: 0
00:00:00.688472 Brand ID: 0x000
00:00:00.688472 Mnemonic - Description = guest (host)
00:00:00.688473 FPU - x87 FPU on Chip = 0 (0)
00:00:00.688473 VME - Virtual 8086 Mode Enhancements = 0 (0)
00:00:00.688474 DE - Debugging extensions = 0 (0)
00:00:00.688475 PSE - Page Size Extension = 0 (0)
00:00:00.688475 TSC - Time Stamp Counter = 0 (0)
00:00:00.688476 MSR - K86 Model Specific Registers = 0 (0)
00:00:00.688477 PAE - Physical Address Extension = 0 (0)
00:00:00.688477 MCE - Machine Check Exception = 0 (0)
00:00:00.688478 CX8 - CMPXCHG8B instruction = 0 (0)
00:00:00.688478 APIC - APIC On-Chip = 0 (0)
00:00:00.688479 10 - Reserved = 0 (0)
00:00:00.688480 SEP - SYSCALL and SYSRET = 1 (1)
00:00:00.688480 MTRR - Memory Type Range Registers = 0 (0)
00:00:00.688481 PGE - PTE Global Bit = 0 (0)
00:00:00.688481 MCA - Machine Check Architecture = 0 (0)
00:00:00.688482 CMOV - Conditional Move Instructions = 0 (0)
00:00:00.688483 PAT - Page Attribute Table = 0 (0)
00:00:00.688483 PSE-36 - 36-bit Page Size Extention = 0 (0)
00:00:00.688484 18 - Reserved = 0 (0)
00:00:00.688484 19 - Reserved = 0 (0)
00:00:00.688485 NX - No-Execute Page Protection = 1 (1)
00:00:00.688486 DS - Debug Store = 0 (0)
00:00:00.688486 AXMMX - AMD Extensions to MMX Instr. = 0 (0)
00:00:00.688487 MMX - Intel MMX Technology = 0 (0)
00:00:00.688487 FXSR - FXSAVE and FXRSTOR Instructions = 0 (0)
00:00:00.688488 25 - AMD fast FXSAVE and FXRSTOR Instr.= 0 (0)
00:00:00.688489 26 - 1 GB large page support = 0 (0)
00:00:00.688489 27 - RDTSCP instruction = 1 (1)
00:00:00.688490 28 - Reserved = 0 (0)
00:00:00.688490 29 - AMD Long Mode = 1 (1)
00:00:00.688491 30 - AMD Extensions to 3DNow! = 0 (0)
00:00:00.688491 31 - AMD 3DNow! = 0 (0)
00:00:00.688492 LahfSahf - LAHF/SAHF in 64-bit mode = 1 (1)
00:00:00.688493 CmpLegacy - Core MP legacy mode (depr) = 0 (0)
00:00:00.688493 SVM - AMD VM Extensions = 0 (0)
00:00:00.688494 APIC registers starting at 0x400 = 0 (0)
00:00:00.688494 AltMovCR8 - LOCK MOV CR0 means MOV CR8 = 0 (0)
00:00:00.688495 5 - Advanced bit manipulation = 0 (0)
00:00:00.688496 6 - SSE4A instruction support = 0 (0)
00:00:00.688496 7 - Misaligned SSE mode = 0 (0)
00:00:00.688497 8 - PREFETCH and PREFETCHW instruction= 0 (0)
00:00:00.688497 9 - OS visible workaround = 0 (0)
00:00:00.688498 10 - Instruction based sampling = 0 (0)
00:00:00.688499 11 - SSE5 support = 0 (0)
00:00:00.688499 12 - SKINIT, STGI, and DEV support = 0 (0)
00:00:00.688500 13 - Watchdog timer support. = 0 (0)
00:00:00.688500 31:14 - Reserved = 0x0 (0x0)
00:00:00.688501 Full Name: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz
00:00:00.688502 TLB 2/4M Instr/Uni: res0 0 entries
00:00:00.688503 TLB 2/4M Data: res0 0 entries
00:00:00.688503 TLB 4K Instr/Uni: res0 0 entries
00:00:00.688504 TLB 4K Data: res0 0 entries
00:00:00.688505 L1 Instr Cache Line Size: 0 bytes
00:00:00.688505 L1 Instr Cache Lines Per Tag: 0
00:00:00.688506 L1 Instr Cache Associativity: res0
00:00:00.688506 L1 Instr Cache Size: 0 KB
00:00:00.688507 L1 Data Cache Line Size: 0 bytes
00:00:00.688507 L1 Data Cache Lines Per Tag: 0
00:00:00.688508 L1 Data Cache Associativity: res0
00:00:00.688508 L1 Data Cache Size: 0 KB
00:00:00.688509 L2 TLB 2/4M Instr/Uni: off 0 entries
00:00:00.688509 L2 TLB 2/4M Data: off 0 entries
00:00:00.688510 L2 TLB 4K Instr/Uni: off 0 entries
00:00:00.688511 L2 TLB 4K Data: off 0 entries
00:00:00.688511 L2 Cache Line Size: 0 bytes
00:00:00.688512 L2 Cache Lines Per Tag: 0
00:00:00.688512 L2 Cache Associativity: off
00:00:00.688513 L2 Cache Size: 0 KB
00:00:00.688513 APM Features:
00:00:00.688514 Physical Address Width: 36 bits
00:00:00.688514 Virtual Address Width: 48 bits
00:00:00.688515 Guest Physical Address Width: 0 bits
00:00:00.688515 Physical Core Count: 0
00:00:00.688516
00:00:00.688516 RAW Centaur CPUIDs
00:00:00.688517 Function eax ebx ecx edx
00:00:00.688517 Gst: c0000000 00000007 00000340 00000340 00000000
00:00:00.688518 Hst: 00000007 00000340 00000340 00000000
00:00:00.688519 Gst: c0000001 00000007 00000340 00000340 00000000
00:00:00.688520 Hst: 00000007 00000340 00000340 00000000
00:00:00.688521 Gst: c0000002 00000007 00000340 00000340 00000000
00:00:00.688522 Hst: 00000007 00000340 00000340 00000000
00:00:00.688523 Gst: c0000003 00000007 00000340 00000340 00000000
00:00:00.688524 Hst: 00000007 00000340 00000340 00000000
00:00:00.688525 Centaur Supports: 0xc0000000-0x00000007
00:00:00.688526 Mnemonic - Description = guest (host)
00:00:00.688526 AIS - Alternate Instruction Set = 0 (0)
00:00:00.688527 AIS-E - AIS enabled = 0 (0)
00:00:00.688528 RNG - Random Number Generator = 0 (0)
00:00:00.688528 RNG-E - RNG enabled = 0 (0)
00:00:00.688529 LH - LongHaul MSR 0000_110Ah = 0 (0)
00:00:00.688529 FEMMS - FEMMS = 0 (0)
00:00:00.688530 ACE - Advanced Cryptography Engine = 0 (0)
00:00:00.688531 ACE-E - ACE enabled = 0 (0)
00:00:00.688531 ACE2 - Advanced Cryptography Engine 2 = 0 (0)
00:00:00.688532 ACE2-E - ACE enabled = 0 (0)
00:00:00.688532 PHE - Padlock Hash Engine = 0 (0)
00:00:00.688533 PHE-E - PHE enabled = 1 (0)
00:00:00.688534 PMM - Montgomery Multiplier = 0 (0)
00:00:00.688534 PMM-E - PMM enabled = 0 (0)
00:00:00.688535 14 - Reserved = 0 (0)
00:00:00.688535 15 - Reserved = 0 (0)
00:00:00.688536 Parallax = 0 (0)
00:00:00.688537 Parallax enabled = 0 (0)
00:00:00.688537 Overstress = 0 (0)
00:00:00.688538 Overstress enabled = 0 (0)
00:00:00.688538 TM3 - Temperature Monitoring 3 = 1 (0)
00:00:00.688539 TM3-E - TM3 enabled = 0 (0)
00:00:00.688540 RNG2 - Random Number Generator 2 = 0 (0)
00:00:00.688540 RNG2-E - RNG2 enabled = 0 (0)
00:00:00.688541 24 - Reserved = 0 (0)
00:00:00.688541 PHE2 - Padlock Hash Engine 2 = 0 (0)
00:00:00.688542 PHE2-E - PHE2 enabled = 0 (0)
00:00:00.688543 Bit 27 = 1 (0)
00:00:00.688543 Bit 29 = 1 (0)
00:00:00.688544
00:00:00.688545
00:00:00.688545 ******************** End of CPUID dump **********************
00:00:00.691182 VM: Halt method global1 (5)
00:00:00.691223 HaltedGlobal1 config: cNsSpinBlockThresholdCfg=2000
00:00:00.691254 Changing the VM state from 'CREATING' to 'CREATED'.
00:00:00.691563 SharedFolders host service: adding host mapping
00:00:00.691574 Host path '/srv/files', map name 'files', writable, automount=true, create_symlinks=false, missing=false
00:00:00.691846 Changing the VM state from 'CREATED' to 'POWERING_ON'.
00:00:00.691911 AIOMgr: Endpoints without assigned bandwidth groups:
00:00:00.691916 AIOMgr: /home/matt/VirtualBox VMs/cole/cole-disk1_1.vmdk
00:00:00.691975 Changing the VM state from 'POWERING_ON' to 'RUNNING'.
00:00:00.697524 Guest Log: BIOS: VirtualBox 4.3.2
00:00:00.698118 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:00.702905 ERROR [COM]: aRC=VBOX_E_IPRT_ERROR (0x80bb0005) aIID={480b372c-c0b5-4c23-9bd7-dcbb85b1594c} aComponent={Display} aText={Could not take a screenshot (VERR_NOT_SUPPORTED)}, preserve=false
00:00:00.711696 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0x00 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:00.711739 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:00.712274 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0, flags=0x1
00:00:00.719318 AHCI#0: Reset the HBA
00:00:00.719376 AHCI#0: Port 0 reset
00:00:00.719772 Guest Log: BIOS: AHCI 0-P#0: PCHS=16383/16/63 LCHS=1024/255/63 629145600 sectors
00:00:00.719812 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:00.732459 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=640 h=480 bpp=32 cbLine=0xA00, flags=0x1
00:00:00.987813 2D video acceleration is disabled.
00:00:03.195036 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:03.195309 Guest Log: BIOS: Boot : bseqnr=1, bootseq=0231
00:00:03.195533 Guest Log: BIOS: Boot from Floppy 0 failed
00:00:03.195756 Guest Log: BIOS: Boot : bseqnr=2, bootseq=0023
00:00:03.196170 Guest Log: BIOS: CDROM boot failure code : 0003
00:00:03.196342 Guest Log: BIOS: Boot from CD-ROM failed
00:00:03.196554 Guest Log: BIOS: Boot : bseqnr=3, bootseq=0002
00:00:03.196802 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0, flags=0x1
00:00:03.197435 Guest Log: BIOS: Booting from Hard Disk...
00:00:03.802887 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1024 h=768 bpp=24 cbLine=0xC00, flags=0x1
00:00:34.848503 RTC: period=0x200 (512) 64 Hz
00:00:38.218843 AHCI#0: Reset the HBA
00:00:38.291762 Guest Additions information report: Version 4.2.6 r82870 '4.2.6'
00:00:38.292184 Guest Additions information report: Interface = 0x00010004 osType = 0x00037100
00:00:38.292307 Guest Additions capability report: (0x0 -> 0x0) seamless: no, hostWindowMapping: no, graphics: no
00:00:38.293642 Guest reported fixed hypervisor window at 00008000000 (size = 0x3400000, rc = VINF_SUCCESS)
00:00:41.586563 Guest Log: VBoxMP::VBoxDrvFindAdapter: using HGSMI
00:00:41.872000 OHCI: Software reset
00:00:41.872200 OHCI: USB Reset
00:00:41.942715 OHCI: USB Operational
00:00:42.250934 IEM: rdmsr(0x40000081) -> GP(0)
00:00:42.252200 IEM: rdmsr(0x40000081) -> GP(0)
00:00:42.252943 IEM: rdmsr(0x40000081) -> GP(0)
00:00:42.254204 IEM: rdmsr(0x40000081) -> GP(0)
00:00:43.902183 Guest Log: VBoxDisp[0]: VBVA enabled
00:00:43.902224 VBVA_INFO_SCREEN: [0] @0,0 1440x2560, line 0x1680, BPP 32, flags 0x1
00:00:43.902241 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2560 bpp=32 cbLine=0x1680, flags=0x1
00:00:43.906850 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2560 bpp=32 cbLine=0x1680, flags=0x1
00:00:46.006007 RTC: period=0x20 (32) 1024 Hz
00:00:46.106422 RTC: period=0x100 (256) 128 Hz
00:00:46.662178 RTC: period=0x20 (32) 1024 Hz
00:00:46.692265 RTC: period=0x100 (256) 128 Hz
00:00:50.196235 RTC: period=0x20 (32) 1024 Hz
00:01:19.886524 Starting host clipboard service
00:01:19.886561 Initializing X11 clipboard backend
00:01:19.888113 Guest Additions capability report: (0x0 -> 0x4) seamless: no, hostWindowMapping: no, graphics: yes
00:01:19.888276 Shared clipboard: starting shared clipboard thread
00:01:19.888553 VMMDev::SetVideoModeHint: got a video mode hint (1440x2461x0)@(0x0),(1;0) at 0
00:01:19.903028 Guest Additions capability report: (0x4 -> 0x5) seamless: yes, hostWindowMapping: no, graphics: yes
00:01:21.032482 Guest Log: VBoxDisp[0]: VBVA enabled
00:01:21.032514 VBVA_INFO_SCREEN: [0] @0,0 1440x2461, line 0x1680, BPP 32, flags 0x1
00:01:21.032521 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2461 bpp=32 cbLine=0x1680, flags=0x1
00:01:21.038856 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2461 bpp=32 cbLine=0x1680, flags=0x1
00:01:25.106348 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2461 bpp=32 cbLine=0x1680, flags=0x1
00:01:25.106585 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2461 bpp=32 cbLine=0x1680, flags=0x1
00:01:25.218051 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2461 bpp=32 cbLine=0x1680, flags=0x1
00:01:25.360556 VMMDev::SetVideoModeHint: got a video mode hint (1440x2532x0)@(0x0),(1;0) at 0
00:01:25.369438 Guest Log: VBoxDisp[0]: VBVA enabled
00:01:25.369462 VBVA_INFO_SCREEN: [0] @0,0 1440x2532, line 0x1680, BPP 32, flags 0x1
00:01:25.369473 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2532 bpp=32 cbLine=0x1680, flags=0x1
00:01:25.369480 Display::handleDisplayResize(): Warning: resize postponed.
00:01:25.378688 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2532 bpp=32 cbLine=0x1680, flags=0x1
00:01:25.398875 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f4358000000 w=1440 h=2532 bpp=32 cbLine=0x1680, flags=0x1
VBoxSVC.log:
VirtualBox XPCOM Server 4.3.2_OSE r90405 linux.amd64 (Nov 2 2013 00:37:14) release log
00:00:00.001347 main Log opened 2013-11-04T08:49:51.549755000Z
00:00:00.001351 main Build Type: release
00:00:00.001355 main OS Product: Linux
00:00:00.001356 main OS Release: 3.11.6-1-ck
00:00:00.001357 main OS Version: #1 SMP PREEMPT Fri Oct 18 16:25:57 EDT 2013
00:00:00.001385 main DMI Product Name: 2436CTO
00:00:00.001395 main DMI Product Version: ThinkPad W530
00:00:00.001454 main Host RAM: 15649MB total, 12865MB available
00:00:00.001459 main Executable: /usr/lib/virtualbox/VBoxSVC
00:00:00.001460 main Process ID: 7507
00:00:00.001461 main Package type: LINUX_64BITS_GENERIC (OSE)
00:00:00.109579 nspr-2 Loading settings file "/home/matt/.VirtualBox/VirtualBox.xml" with version "1.12-linux"
00:00:00.116532 nspr-2 Successfully initialised host USB using sysfs
00:00:00.120707 nspr-2 NetIfAdpCtlOut: VBoxNetAdpCtl: Error while retrieving link speed for wlp3s0: VBoxNetAdpCtl: ioctl failed: Operation not supported
00:00:00.121136 nspr-2 Failed to open "/dev/vboxdrvu", errno=13, rc=VERR_VM_DRIVER_NOT_ACCESSIBLE
00:00:00.121772 nspr-2 VDInit finished
00:00:00.122352 nspr-2 ERROR [COM]: aRC=NS_ERROR_FAThis page mentions that the permissions of /dev/vboxdrvu should be 0666, but that they may erroneously be set to 0600:
Linux installers: Move the udev rule execution order from 10 to 60. The reason for having it at 10 was to allow other rules to overwrite these rules, mainly permissions of the USB devices. This is not longer necessary (we are using /dev/vboxusb for a long time now) and we need to take care that certain systems like EL6 don't reset the permissions of /dev/vboxdrvu -- the unrestricted device -- back to 0600 (we want 0666 here).
And sure enough:
matt@localhost ~ $ ls -Al /dev | grep vbox
crw------- 1 root root 10, 59 Nov 8 11:46 vboxdrv
crw------- 1 root root 10, 58 Nov 8 11:46 vboxdrvu
drwxr-x--- 3 root vboxusers 60 Nov 8 11:46 vboxusb/
I've changed the permissions on /dev/vboxdrvu to 0666, and the VirtuaBox log is not longer getting filled with the
Failed to open "/dev/vboxdrvu", errno=13, rc=VERR_VM_DRIVER_NOT_ACCESSIBLE
error message. I'll check back in here once I've had enough time to assess my Windows 7 guest's stability. -
What are the host network requirements for a 2012 R2 failover cluster using fiber channel?
I've seen comments on here regarding how the heartbeat signal isn't really required anymore - is that true? We started using Hyper-V in its infancy and have upgraded gleefully every step of the way. With 2012 R2, we also upgraded from 1gb iSCSI
to 8GB Fiber Channel. Currently, I have three NICs in use on each host. One for "No cluster communication" on it's own VLAN. Another for "Allow cluster network communication on this network" but NOT allowing clients, on
a different VLAN. And lastly the public network which allows cluster comms and clients on it (public VLAN).
Is it still necessary to have all three of these NICs in use? If the heartbeat isn't necessary any more, is there any reason to not have two public IPs and do away with the rest of the network? (two for fault tolerance) Does Live Migration
still use Ethernet if FC is available? I wasn't sure what all has changed with these requirements since Hyper-V first came out.
If it matters, we have 5 servers w/160GB RAM, 8 NICs, dual HBAs connected to redundant FC switches, going to two SANs. We're running around 30 VMs right now.
Can someone share their knowledge with me regarding the proper setup for my environment? Many Thanks!Hi,
You can setup cluster with a single network but that leaves you with single point of failure on the Networking front, it is still recommended to have a heartbeat network.
Live migration would still happen though Ethernet, it has nothing to do with FC. Don't get confused, you had iSCSI for storage which used one of your VLAN and now you have FC for your storage.
Your hardware specs looks good. You can set up the following networks -
1. Public Network - Team two or more NICs (based on bandwidth aggregation)
2. Heartbeat Network - Don't use teamed Adaptor
3. Live Migration - Team two or more NICs (based on bandwidth aggregation)
Plan properly and draw guidelines to visualize and to remove single point of failure at all points.
Feel free to ask if you have some more queries.
Regards
Prabhash -
Permanent up/down link between host fiber card and fiber switch
During connecting emc symterix to ORACLE VM machine with ECC there is instability of connection as described here:
Description: Switch switch31 Slot 3, Port 4 Linkdown. Reason: None
Severity: CRITICAL
Server Timestamp: Mon Jul 26 17:39:26 IDT 2010 Agent Name: Fibre Channel Connectivity Agent Agent Timestamp: 2010/07/26 17:39:08 Alert Name: Port Link Status Changed Alert ID: 534 Host Name: zil01app15.ds.mot.com Canonical Managed Object Name: Connectivity Device=2000000dec6d6280>Connectivity Port=2084000dec6d6280 Managed Object Persistent Id: [com.emc.ecc.dl.persistent.topology.ConnectivityDevFibrePort,3369032]
Description: Switch switch31 Slot 3, Port 4 Linkup
Severity: NORMAL
Server Timestamp: Mon Jul 26 17:39:28 IDT 2010 Agent Name: Fibre Channel Connectivity Agent Agent Timestamp: 2010/07/26 17:39:08 Alert Name: Port Link Status Changed Alert ID: 534 Host Name: zil01app15.ds.mot.com Canonical Managed Object Name: Connectivity Device=2000000dec6d6280>Connectivity Port=2084000dec6d6280 Managed Object Persistent Id: [com.emc.ecc.dl.persistent.topology.ConnectivityDevFibrePort,3369032]
link is going up and down
any idead what can it be ?
Regards
Victorwe also tried the following:
2. We compared OS/driver versions on both ( Oracle VM and Oracle Linux ) machines.
Here is the table:
Hostname OS HBA version
zil01gscapp01 Oracle VM server release 2.21 8.03.00.10.02.02_k
zil01gscmgt01 Oracle Enterprise Linux release 5.5 ( Carthage ) 8.03.01.04.05.05_k
From this comparison we concluded that VM server HBA driver should be upgraded.
We have downloaded from the QLOGIC site driver version 8.03.01.06 ( see the link )
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProduct.aspx?ProductCategory=39&Product=937&Os=65
By installing driver we got following error:
[root@zil01gscapp01 qla2xxx-src-8.03.01.06.05.06-k]# ./extras/build.sh install
case=install here2 main
QLA2XXX -- Building the qla2xxx driver...
drv_build modules
RedHat 1 make -j5 -C /lib/modules/2.6.18-128.2.1.4.25.el5xen/build M=/tmp/qla2xxx-src-8.03.01.06.05.06-k modules
make: Entering directory `/usr/src/kernels/2.6.18-128.2.1.4.25.el5-xen-i686'
make: *** No rule to make target `modules'. Stop.
make: Leaving directory `/usr/src/kernels/2.6.18-128.2.1.4.25.el5-xen-i686'
/lib/modules/2.6.18-128.2.1.4.25.el5xen/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
QLA2XXX -- Installing the qla2xxx modules to /lib/modules/2.6.18-128.2.1.4.25.el5xen/extra/qlgc-qla2xxx/...
install: cannot stat `*.ko': No such file or directory
It looks like there is no kernel source in order to compile with the new driver, in other words Oracle VM comes wihout kernel source.
Please, your advise/opinion about all above activities and further work. -
LUN has gone AWOL - Solaris 10 x86, Emulex HBAs, IBM DS8300
We're setting up a test environment for our backup software, currently running on Windows, but targeted for Solaris. This is also a test of our first Solaris x86 deployment.
* HP DL580 G5 server.
* Solaris 10 x86 10/08 w/patch cluster from ~March 18th.
* One dual port Emulex HBA
* IBM DS8300 SAN
When we first set this up, we could see the one LUN in format. After adding in the IBM Multipathing software, the LUN disappeared and the FC devices are shown as unconfigured in `cfgadm -al`. We removed the IBM multipathing software, but still cannot see the LUN. Did a reconfiguration reboot and all that.
Current state:
# cfgadm -al c6
Ap_Id Type Receptacle Occupant Condition
c6 fc-fabric connected unconfigured unknown
c6::5005076306130287 unknown connected unconfigured unknown
# luxadm -e port
/devices/pci@0,0/pci8086,3607@4/pci10b5,8533@0/pci10b5,8533@a/pci10df,fe00@0/fp@0,0:devctl CONNECTED
/devices/pci@0,0/pci8086,3607@4/pci10b5,8533@0/pci10b5,8533@a/pci10df,fe00@0,1/fp@0,0:devctl NOT CONNECTED
# luxadm -e dump_map /devices/pci@0,0/pci8086,3607@4/pci10b5,8533@0/pci10b5,8533@a/pci10df,fe00@0/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 a0200 0 5005076306130287 5005076306ffc287 0x1f (Unknown Type)
1 a0100 0 10000000c97a7866 20000000c97a7866 0x1f (Unknown Type,Host Bus Adapter)
# modinfo|grep FC
102 ffffffffefc2c000 1aab0 190 1 fp (SunFC Port v20090205-1.79)
103 ffffffffefc47000 199f0 194 1 fcp (SunFC FCP v20090205-1.132)
104 ffffffffefc63000 a2a0 - 1 fctl (SunFC Transport v20090205-1.59)
107 ffffffffefc6c000 377bc0 191 1 emlxs (SunFC emlxs FCA v20081211-2.31p)
189 ffffffffefb547e0 9620 193 1 fcip (SunFC FCIP v20090205-1.50)
190 ffffffffefb49dc0 5610 196 1 fcsm (Sun FC SAN Management v20070116)
#c6 is the first port on the dual port card. c7, not shown, is the second port. Prior to installing the IBM multipathing software, we were seeing the one assigned LUN on c6.
Trying to `cfgadm -c c6` does nothing. Adding `-f` causes an error:
# cfgadm -c configure c6
# cfgadm -al c6
Ap_Id Type Receptacle Occupant Condition
c6 fc-fabric connected unconfigured unknown
c6::5005076306130287 unknown connected unconfigured unknown
# cfgadm -f -c configure c6
cfgadm: Library error: failed to create device node: 5005076306130287: Invalid argument
failed to configure ANY device on FCA port
# cfgadm -al c6
Ap_Id Type Receptacle Occupant Condition
c6 fc-fabric connected unconfigured unknown
c6::5005076306130287 unknown connected unconfigured unknown
#We're currently at a loss here. Any pointers would be greatly appreciated. I am checking sunsolve and google, with plenty of similar hits, but no resolution as yet.
Thanks,
MarkOk, so after that detailed message, my SAN admin just realised he hadn't assigned any LUNs to the server. :D
The LUN that we had seen previously was an artifact from an earlier configuration. -
Guest two node Failover Cluster with SAS HBA and Windows 2012 R1
Hi all, i have two IBM x3560 brand new servers with V3700 IBM Storage. The Servers are connected to the storage through four SAS HBA adabters (two HBA's on each server). I want to create a two node guest Fileserver Failover Cluster. I can present the
LUN's to the guest machines, but when i 'm running the cluster creation wizard it can't see any disk. I can see the disks on disk management console. Is there any way to achive this (the cluster creation) using my SAS HBA presented
disks, or i have to use iSCSI to present the disks to my cluster?
Thank you in advance, George
Hi all, i have two IBM x3560 brand new servers with V3700 IBM Storage. The Servers are connected to the storage through four SAS HBA adabters (two HBA's on each server). I want to create a two node guest Fileserver Failover Cluster. I can present the
LUN's to the guest machines, but when i 'm running the cluster creation wizard it can't see any disk. I can see the disks on disk management console. Is there any way to achive this (the cluster creation) using my SAS HBA presented
disks, or i have to use iSCSI to present the disks to my cluster?
Thank you in advance, George
1) Update to R2 and use shared VHDX which is a better way to go. See:
Shared VHDX
http://blogs.technet.com/b/storageserver/archive/2013/11/25/shared-vhdx-files-my-favorite-new-feature-in-windows-server-2012-r2.aspx
Clustering
Options
http://blogs.technet.com/b/josebda/archive/2013/07/31/windows-server-2012-r2-storage-step-by-step-with-storage-spaces-smb-scale-out-and-shared-vhdx-virtual.aspx
2) If you want to stick with non-R2 (which is a BAD idea b/c tons of reasons) you can spawn an iSCSI target on top of your storage, make it clustered and make it provide LUs to your guest VMs. See:
iSCSI Target in Failover
http://technet.microsoft.com/en-us/library/gg232632(v=ws.10).aspx
iSCSI Target Failover Step-by-Step
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Use third-party software providing clustered storage (active-active) out-of-box.
I would strongly recommend to upgrade to R2 and use shared VHDX.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
V-HBA Guest VM cannot Live Migration
Hi All,
I'm using Windows Server 2012 Data Center OS and configured the for the hyper-V server role with Fail-over cluster (4 Node – Cluster).
Each Physical server installed with Two Qlogic HBA Adapters.
We have configured following configuration on hyper-v Server and SAN (HP) storage.
Enabled the Virtual SAN Manager.
Created Each Hyper-V Host Virtual Fiber channel Switch. Each Host configured two adapters. (Fibre Channel SAN 1 / Fibre Channel SAN 2) .
Using the HP storage and enabled the switch port level (N_Port ID Virtualization (NPIV).
Created new VM and assign new two vHBA Adapters. Each adapter having two sets of wwn numbers.
Each Adapter SET A wwn Address discovered by SAN switch and configured the zone . However SET B not discovered but we manually created the zone for SET B for both Adapters.
Present the Storage to the VM and installed the MPIO. SAN disk visible on the VM disk management.
During the live migrate the VM to different host I’m getting below error.
Live migration of 'Virtual Machine TEST-Server' failed.
Virtual machine migration operation for 'TEST-Server' failed at migration destination 'HV02'. (Virtual machine ID 378AE3E3-5A4F-4AE7-92F8-D47855C2D1C5)
The virtual machine 'TEST-Server' is not compatible with physical computer 'HV02'. (Virtual machine ID 378AE3E3-5A4F-4AE7-92F8-D47855C2D1C5)
Could not find a virtual fibre channel resource pool with ID 'New Fibre Channel SAN1'
Could not find a virtual fibre channel resource pool with ID 'New Fibre Channel SAN2'
Event ID : 21502
I need some support from Expert for this issue. I’m trying to configure the Guest Cluster with HBA. The Quick Migration working fine but still failing with live migration. I want to resolve the live migration issue.
AucsnaHi Aucsna,
"it's issue with the Virtual SAN Switch label name."
Has the problem been solved ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Live Migration failed using virtual HBA's and Guest Clustering
Hi,
We have a Guest Cluster Configuration on top of an Hyper-V Cluster. We are using Windows 2012 and Fiber Channel shared storage.
The problem is regarding Live Migration. Some times when we move a virtual machine from node A to node B everything goes well but when we try to move back to node A Live Migration fails. What we can see is that when we move the VM from node A to B and Live
Migration completes successfully the virtual ports remain active on node A, so when we try to move back from B to A Live Migration fails because the virtual ports are already there.
This doesn't happen every time.
We have checked the zoning between Host Cluster Hyper-V and the SAN, the mapping between physical HBA's and the vSAN's on the Hyper-V and everything is ok.
Our doubt is, what is the best practice for zoning the vHBA on the VM's and our Fabric? We setup our zoning using an alias for the vHBA 1 and the two WWN (A and B) on the same object and an alias for the vHBA 2 and the correspondent WWN (A and B). Is it
better to create an alias for vHBA 1 -> A (with WWN A) and other alias for vHBA 1 -> B (with WWN B)?
The guest cluster VM's have 98GB of RAM each. Could it be a time out issue when Live Migration happen's and the virtual ports remain active on the source node? When everything goes well, the VM moves from node A with vHBA WWN A to node B and stays there
with vHBA WWN B. On the source node the virtual ports should be removed automatically when the Live Migration completes. And that is the issue... sometimes the virtual ports (WWN A) stay active on the source node and when we try to move back the VM Live Migration
fails.
I hope You may understand the issue.
Regards,
Carlos Monteiro.Hi ,
Hope the following link may help.
To support live migration of virtual machines across Hyper-V hosts while maintaining Fibre Channel connectivity, two WWNs are configured for each virtual Fibre Channel adapter: Set A and Set B. Hyper-V automatically alternates between the Set A and Set B
WWN addresses during a live migration. This ensures that all LUNs are available on the destination host before the migration and that no downtime occurs during the migration.
Hyper-V Virtual Fibre Channel Overview
http://technet.microsoft.com/en-us/library/hh831413.aspx
More information:
Hyper-V Virtual Fibre Channel Troubleshooting Guide
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
Hyper-V Virtual Fibre Channel Design Guide
http://blogs.technet.com/b/privatecloud/archive/2013/07/23/hyper-v-virtual-fibre-channel-design-guide.aspx
Hyper-V virtual SAN
http://salworx.blogspot.co.uk/
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Can only bring some CSV's online on one specific host
Hi.
I have a three node Hyper-V (2012 R2) cluster.
It has 12 CSV's connected. Two of the CSV's can only be brought online on one of the hosts. It seems, they are locked to that host in some way.
The end result is that when I take that host down for maintenance, the two CSV's go offline and all VM's on them, crash.
I suspect a particular VM of causing this but I don't know how to fix the problem.
Anyone?
Thanks in advance.
/MichaelWhat size are the CSV and is the storage connected via iSCSI, Fibre or SMB?
If Fibre or iSCSI, check that the SAN is configured to allows all three hosts to connect to the storage group and each has access to all LUNS from a SAN point of view. If iSCSI check the Initiator and the MPIO settings on all three host etc.
With regards to the Access denied, have a scan through this link it maybe of help and check if the VM worker process (VMMS) has the relevant permissions on the CSV volume.
http://blogs.technet.com/b/askcore/archive/2014/10/01/virtual-machine-checkpoint-fails-with-access-denied-when-running-on-a-clustered-shared-volume.aspx
If possible, I think i would attempt to move the VMs of the storage, remove and re-present it or increase the size of the other CSV. The number of CSV is down to design, connections the SAN can support and various other things and although 12 is a lot of
CSV for three nodes, as mentioned above it should work and there are many cluster with a lot more.
I know its a pain, but I would really try to run the validation wizard to check widows updates match etc. Also have you checked all firmware updates for HBAs or NICs etc?
Kind Regards
Michael Coutanche
Blog:Twitter:LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
I have 2 zones on an s10 host which also has 2 FC HBA devices. The HBAs are connected to a SAN.
I tried to add the HBA device name which is in the form /devices/pci@8,700000/SUNW,qlc@3,1/fp@0,0:devctl to the zonecfg as follows -
global# luxadm -e port
/devices/pci@8,700000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
/devices/pci@8,700000/SUNW,qlc@3,1/fp@0,0:devctl
CONNECTED
# zonecfg -z zone1
zonecfg:zone1> add device
zonecfg:zone1:device> set match=/devices/pci@8,700000/SUNW,qlc@3,1/fp@0,0:devctl
zonecfg:zone1:device> end
zonecfg:zone1> add device
zonecfg:zone1:device> set match=/devices/pci@8,700000/SUNW,qlc@3/fp@0,0:devctl
When I rebooted the zone, I get the following error on the zone console -
# luxadm -e port
Error: Could not retrieve device tree snapshot. - socal.
Error: Could not retrieve device tree snapshot. - fp.
Error: Could not retrieve device tree snapshot. - ifp.
The global zone can still see the devices as 'Connected'. Does anyone know how to add HBA devices to s10 zones?
Thanks,
snygtcan you list the device as seen from inside your zone?
I couldn't find any documentation prohibiting the use of /devices/ but as this interface is declared as private (man -s 7FS devfs)I would use /dev/ instead.
An other option is of course to mount the filesystem from the globalzone.
bbr -
Xserve raid brocade switch, do I need xsan for multiple xserve raid with one gbic hba?
So I have 3 xserve raids. I would like to mount all 6 volumes on a single server with a 2 port hba. I have a brocade silkworm 3200, however the raid volumes will not mount. The only thing I can think of is do i need xsan to accomplish this? Initially I gathered it would be like additional resources on a normally data switch bu that does not seem to be the case.
Thanks in advance for any assistance.No, you don't need XSAN for this. XSAN is for connecting one or more RAID units to more than one host. Since you only have one host, XSAN isn't an issue.
You may need to look more closely at the switch configuration. Mac OS X doesn't support multipath (at least last time I checked), so you'll need to make sure that you're either using just one link from the server, or that you've setup zoning in the switch so that each link from the server sees a subset of the RAID volumes (e.g. three RAID volumes mapped to each link to the server).
You may also need to check the RAID configurations to make sure you're not using LUN masking (a feature of earlier firmware versions).
One test here would be to connect the server directly to each RAID controller in turn and see if you see the appropriate volumes. The chances are you do, which points back to the switch configuration being the issue.
Maybe you are looking for
-
Hi.. am trying to create a Sales order ..and i have assigned the source structure. when i run the last step( direct input method)..it is giving me the below error. as ..Date / / is not valid. not sure what the error is.
-
SELECT from MySQL, INSERT into Oracle
Hallo, I am new to Java. My task is to collect data from about 30 tables inside MySQL database and then insert it to similar tables in Oracle. Script should copy data one a day, during the night. Number of rows in each table is about 30,000. MySQL ve
-
Procedure to grab PDF from fileSystem store into LONGRAW Datatype.
Hi All, I have found there are ways to store PDF's from file system into BLOB datatype, but not into LONGRAW. In PeopleSoft we have only LONGRAW type. Can any one send some hints to load PDF's from filesystem into Oralce 10g LONGRAW column. Thanks in
-
Is Photoshop CS5 compatible with Yosemite?
Has anyone upgraded to Yosemite using the CS5 suite? Are there any compatibility issues with Photoshop CS5 and Yosemite? All the best, Ryan
-
Droid Home key not working, along with other things.
Recently, my Droid's Home key and Search key quit working. My passcode lock on the main screen won't work, its like its been disabled, but thats not the case. Also, when I power off the phone, I only get the option to turn it off, all the other opt