2 identical phones 1 problem

I currently have 2 indentical Iphones (3gs) and 1 is never connected to 3g only E even when set next to the other phone while on 3g. I have wifi off and 3g on, on the one with no 3g while the other is happily connected and 3Gin away. Any ideas or help would be awsome, I have none and am new to the Iphone world. thanks jim

Sure you can. You just have to tell it which plot you want to have which bar style.
Unfortunately, there are only 3 bar styles available: 1 pixel wide, "mostly" filling the available space, and totally filling the available space.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

Similar Messages

Iam using 3g with the software 4.1.2 .. my phone undergoing problems like .. struck, slow op-eration... is this version supports 3g... or else wat should i do now to keep my phone safer and faster

iam using 3g with the software 4.1.2 .. my phone undergoing problems like .. struck, slow op-eration...
is this version supports 3g... or else wat should i do now to keep my phone safer and faster

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

I was lost my pad ios7.1 find my phone was activated lost mode enabled i recieved e mail when this action done also sound play was done also i recieved picture from i cloud on my i phone the problem is that i didnot recieve the place althought the icon no

i was lost my pad ios7.1 find my phone was activated lost mode enabled
i recieved e mail when this action done also sound play was done
also i recieved picture from i cloud on my i phone
the problem is that i didnot recieve the place althought the icon notify me when found was turned on ????

Ahmed elsaed abdelgalil wrote:
also i recieved picture from i cloud on my i phone
If you received a photo stream photo on your phone, save it to your camera roll, then locate the photo in the Photos section of the Photos app, tap the location listed above the photo in Moments and it should show you where it was taken on a map (assuming location services was enabled for the camera on your phone).

I have i phone 5 problems is when my phone battery left 20% then phone automatic shutter down plz tell me solution for this

i have i phone 5 problems is when my phone battery left 20% then phone automatic shutter down plz tell me solution for this

It seems like if you have a calibration issue with your battery percentage indicator.
To recalibrate the indicator, charge your battery to 100% then let it drain completely until the iPhone shuts down then charge it to 100% again and do not disturb it until it reaches 100%. This will reclaibrate your battery indicator.

New C6-01 user/phone and problem with backup/resto...

Hello everyone.
I recently purchased a new C6-01 (and first-time Nokia owner) and having trouble with getting maps restored onto a new 32GB uSDHC card and need some help.
It is my understanding that I can backup and restore all my phone contents and settings to a new memory card using Nokia Suite. So what I did is performed a complete backup using Nokia Suite, ejected the old uSD card (that came with the phone), put in the new uSD card that I had purchased and format it, then performed a complete restore to the phone and the new memory card.
During the restore, I saw errors on the phone display that said something like disk write error and gave me the option of stop or retry. I hit the retry a few times and still getting the error. Thinking it may be a bad uSD card, I returned/exchanged for another identical one. With the 2nd new card, I still get the same error message so I rebooted the phone and ran restore again but this time instead of restore everything all at once, I selected a few items at a time and eventually got everything restored, at least without errors this time.
When I ran maps after the restore, it told me that I needed to download the maps, and when I tried to download it thru a WiFi connection (at my house), I keep getting Disk error - cannot complete write. Retry or data will be lost. At this point if I run Files, it will show drive E but not any free space number (and selecting it will show free space not available). A reboot will bring back drive E and show 29.4GB free. So I am completely stumped at this point and believe that for whatever the reason I can not get maps loaded onto a non-Nokia-provided memory card.
I am running Nokia Suite 3.5.34 on WIndows XP w/SP3. The new 32GB uSDHC card is a class 4 card made by Sandisk. The phone is running the Belle Refresh v111.040.1511 dated 7/28/2012. Map version: v3.09 12wk20 b01-MW OpenGL MN-Map version 0.2.46.103
Sorry for the large amount of information posted here, but I wanted to provide enough details for you to look at. Please feel free to ask for more information and thank you in advance for your help.
Bill

yes I reformatted the card, and after it was finished, I ran Maps. When it told me I need to download the maps (and gave me 3 options), I exited and connected the phone to my computer, browsed and deleted the cities folder and the qf file. Waited a little bit and reran Maps. This time I used the WiFi connection from the phone to download.
I gave me an error when I tried to download the entire USA maps, so I selected Texas and Pennsylvania state maps. Those downloaded ok. Next when I tried to download New Jersey, it started a little bit and the disk error message came up again so I hit stop. Ran Files and saw the memory card is grayed-out (did not indicate and free space), I know the same problem is happening again.

Syncing contacts of two identical phones on one co...

Hi,
I just got two identical C5-03 phones for myself and my wife. I created two seperate log-ins on the Nokia Suite and proceeded to sync and finetune the contacts for both of our phones. The problem is that the Suite doesn't seem to treat the phones and log-ins as two separate entities and mixes up the contacts, pictures, etc... of both and makes a mess of things. Is there a way to keep the two phones separate on the Suite??? Surely someone here must have experienced the same situation.
Thanks.

Thanks Farby for the quick response. Maybe this is something that Nokia should really look into?
I have spent the whole day fiddling with this problem. I even gave separate names to the devices (Nokia C5-03**** and Nokia C5-03****) to try to separate the two, but to no avail
One thing I'm considering is finetuning all my contacts, doing a sync with my phone, disconnecting and then deleting all contacts from the Suite. After that connecting the wifes phone and doing all again for that phone and then not performing any syncs after that.
It really does look like a totally backwards way of doing something that should be really simple....

Analog Emergency Phone Voltage Problem

We have a customer who has some emergency phones around their campus. These are made by Ramtel, and are simple devices on a pedestal, w/ two buttons, black and red. Typically, one dials security and the other dials 911, though we currently have both programmed to dial 911. You program the device by dialing into it. The device is programmed properly.
When hitting the black button, and plugged into the VG248, it dials out properly. When hitting the red button, plugged into the vg 248, we hear dialing then disconnect. (Note: this is not a PLAR device, it must dial the digits.) Ramtel suggested that we test the voltage. The VG248 provided 35 volts on-hook. We found we were getting only 8.8 volts off-hook. Ramtel advised that the device must have 10 volts off-hook to work properly. We decided to switch to an FXS card on a 2811 to see if it would push more voltage. The on hook voltage was then 48 volts and the off-hook voltage was approximately the same 8.8 volts; however, now we get both buttons to dial and then disconnect about a second later. We've tested the lines and they are clean.
When we plug the device directly into a POTS line, it works as expected, so it looks like the voltage is definitely an issue. It appears that these devices have a very low tolerance for variance in expected voltage.
What is more troubling is that these devices were plugged into a CM 4.x system on the same VG248 and reportedly worked previously. Unfortunately, I was not able to verify that, but that is the story I have heard.
Has anybody fought these before? Is there anything I can do to increase the voltage? Is there any device that would increase the voltage pushed out?

I'm having an almost identical problem. These boxes were working fine (on vg224) and then one day they all decided, nope. We've discovered a lot of things.
#1 The version of code we were running was only putting out 22 volts max
#2 There is an undocumented command "alt-battery-feed feed2" applied to the port gives another 7-8 On hook Volts on the line
#3 Even ATT's line does not meet ramtel's spec
Ramtel's spec says on hook voltage has to be between 40 and 50V and off hook voltage has to be 10V with a minimum of 30ma current, max 55ma
I've tested the VG's with and without the alt-battery command and an ATT line and the only difference is ATT is putting out 46V and the VG maxes at 43-44. Everything else is identical (26ma on hook, 6V 12ma off hook). I'm going to call ramtel and see what they believe is going on since the voltage is in spec and the current is the same as what ATT is providing.

Nokia Asha 206 Phone memory problem.

I have a Nokia Asha 206. Recently I updated it. After the update now out shows phone memory full all the time though I don't have any file in phone memory accept those which I could not delete. Please tell me how to solve this problem cause even if anyone sends me text msg it does not come to my phone cause memory is full. Even I can't send any msg. Everytime I try to send or receive something it showed memory full.i have external memory having 700mb free space but only 37kb internal free space.

Hi, wasimul. Welcome to our community. We suggest deleting some of your files like photos, videos, and text messages that you no longer need. You can also save your contacts directly to the memory card to avoid such issue. Another option is to reset it to its original settings. Here's how: Restore factory settings. The link is still applicable regardless of your location. We look forward to your reply.

I Phone 4 - problem with bluetooth after upgrading to ios 4.2.1

Since I have upgraded the software on my I phone 4, I have noticed a problem with my hands free kit in my car using bluetooth. When I make a call the sound comes through the system ok, but if I dial to voicemail the sound doesn’t come through. I never had this problem prior to the upgrade. Any suggestions?

At least there is a way! only problem by doing this is, on the vodafone network you have to input your phone number followed by a pin every time if you access using +447836 121 121. The short key 121 is the way forward! Will this be fixed? is there a way of taking the I phone 4 back to previous version of software?

One Apple ID two phones big problem.

Hi guys,
Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
I deleted user and created my user which was synced with iCloud and worked without any problem.
Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
So I have two doubts:
- I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
- another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
PLEASE HELP, in my country we have awful support !

Just left the Apple store with an official answer. You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.

Cell phone charging problem

Hi,
My Nokia 6234 is about 2-3 years old. And in the last few months I've started noticing a problem. When I fully charge my phone and it's at work, it loses charge in about a day... even when I don't use it much at all, and I don't use bluetooth, play games etc. The signal strength/network is fine.. so it shouldn't be because it's searching for a signal constantly. And this never happens anywhere except at work, ie. at home a full-charge lasts 3 days easily if i don't use it much. What could be the problem here? Something to do with the environment perhaps? Any ideas will be much appreciated

Yes.. Environment has its effects on the battery.. especially extreme Cold and extreme Hot temperatures.. but do you have remarkable difference at home and at work?

Free phone memory problem

i have a problem with my nokia 305 with freeing space at the expense when there is nothing to delete on phone

Plug your phone in to your PC and open BlackBerry Desktop Software. Once your phone has connected to it, click Device at the top of the software then Restore. A list of previous data backups will appear. Simply choose the second-most recent one (because the most recent one should be the one you're currently running on your phone) and load it. If you ever decide you wish to revert back to your current version of OS, simply follow those steps but pick the backup file at the very top of the list.
Please post back with your results.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Nokia N91 phone memory problem

I have owned this Nokia N91 for a year and 9 months. Phone memory is a problem as i cannot recieve any messages. The message, not enough memory to recieve message(s), delete some data. I have taken absolutely everything off the phone memory except messages, contacts, and calender data, yet i still have something taking up 14 of my 15MB's of memory. What can i do as i can't recieve any messages. I have tried allocating messaging memory to the hard drive but i am presented with the same problem. Please help as i need to keep this phone working till May.

19-Apr-2008 06:11 PM
os2lover wrote:
Hi,
No the *#7370# doesn't affect your harddisk, only the phone memory.
Best regards,
Olivier Baum
ohh thanks for this info... Im just curious, how do we format the hard drive? Thanks
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

Solved Bluetooth cell phone pairing problem after 10.4.8 update

I am not sure why it works this way,but I tested it a few times and it was consistant.First I updated to version 10.4.8 . The 3 motorola razor phones I have were not able to pair anymore at all.Under 10.4.7 file transfers were no problem and pairing always occured.I use the d-link dbt 120 bluetooth adapter and until now (with 10.4.8) communication was never a problem when the adapter was attached to my belkin hub where it has a docking area for flash drives and mp3 players etc... .
When I now try to use the adapter on the usb hub it doesn't work now at all.I get messages that communication is not possible etc... . When I put the adapter on the one usb port on the front of my powermac g5 then I get very quick pairing ,file transfers etc... . I moved the bluetooth adapter back and fourth between the hub and the front of the computer and the result was always the same.The port on the mac works and others don't anymore.
The other ports on the usb hub worked fine with 10.4.7 but not with 10.4.8. It seems like the hub fell from grace or something with the new update. I felt better when I could get it to work. I wish I would have found this out before I did the archive and install though to go back to 10.4.7 .
I reupgraded to 10.4.8 then found the solution to my problem maybe 10 minutes away from a second archive and install to take me back to 10.4.7.

Hi Ralph,
Thanks for your response! Unfortunately I am enough of a newbie not to understand the implication of what you said Where should I look for these devices, and are they conflicting with iChat somehow? Do you mind telling me what action to take to fix this?
In the meantime I did a 10.4.9 update and airport stopped working completely. I talked to Apple support and they had me do a factory reset on my airport extreme basestation and reconfigure it in order to get to work again, and I have not tried video iChat since that happened.
Thanks!
Seleya
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.9)
Powerbook 15" Hi Res 1.67 GHz 2 Gb RAM Mac OS X (10.4.9)

How do I get an unlocked iPhone 3GS out of recovery mode (connect to itunes error) on screen. Cannot do anything on phone until problem is fixed ...

After putting phone into DFU mode and attempting to restore and update the phone, at the end, an error message came up saying: "the iPhone could not be restored. An unknown error occured (1)."
How do I go about fixing this problem. I need to get my phone out of this (connect to itunes) mode. Everything I've tried does not work ! By the way, I have the latest version of itunes .. (iTunes 11)

Error 1 basically means you need to try two more times, and if the issue remains unresolved, contact Apple Support.
Resolve specific iTunes update and restore errors - Support - Apple
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

2 identical phones 1 problem

Similar Messages

Maybe you are looking for