2 important Logic 9 questions

I bought logic pro 9 in 2010 together with my Imac 27 inch. Now I got the seagate HD problem. So I got a new HD from warranty..
Then I also upgraded to 16 gb ram. but now its slower, the cpu/HD in logic.
So first Quest,
how do I use all of my RAM?. it stucks with arrangements I had no problem with before..
And now I also can't install jampacks. it asks for "logic install disc" after I Installed "jampack content 1 disc" instead of asking for "jampack content 2"?
how do I fix this all this stuff??
Can I download Logic with my serialnumber from appstore??
Best,
Alex

Can I download Logic with my serialnumber from appstore??
No....
how do I use all of my RAM?.
If you are running Logic Pro 9 in 64bit mode (the default) then Logic Pro (and any 3rd party plugins you may have) automatically uses all of the available memory
And now I also can't install jampacks. it asks for "logic install disc" after I Installed "jampack content 1 disc" instead of asking for "jampack content 2"?
Once you have installed Logic Pro 9 itself from the DVDs... you could update it via Software Updates...
But... in your case because you are running SL.. I'd recommend manually updating to at least 9.1.6 by going to this webpage...
http://support.apple.com/kb/DL1519
Then, after doing that update... you go to the Logic Pro Menu bar.. under Logic Pro and "Download Additional Content" (which includes all the Jam packs etc) and you can either download all the extra content or you can select what you want and what you don't want.
Logic Pro 9 (updated to at least 9.1.6) plus Snow Leopard ... is a very good stable setup... and works very well once correctly configured. many people also run 9.1.8 without issue with SL... but try 9.1.6 first.. and see how that works out for you... and upgrade to 9.1.8 only if you find you need to at this time.
Merry Christmas

Similar Messages

LPAR - LOGICAL PARTITION QUESTION -

Hello SDN Experts.
LPAR (LOGICAL PARTITION QUESTION)
Our current Production Environment is running in Distributed Installation on
IBM System P5 570 Servers AIX ver 5.2, each node is running two Applications: SAP ERP 2005 SR1 (ABAP + JAVA) and CSS. (Customer Service System)
Node One
u2022     SAP Application (Central Instance, Central Services)
u2022     Oracle 9i Instance for CSS Application.
Node Two.
u2022     Oracle 10G Instance for SAP Application
u2022     CSS Application.
To improve performance we are planning to create a new LPAR for SAP.
According to the IBM HW Partner LPAR is logically isolated with different HW/SW resource(CPU/Memory /Disk resource, IP/hostname/mount point)...
Question:
I have this two possible solutions to copy SAP instances (app + db) to new LPAR, can I apply SCENARIO 2, which in my opinion is easier than SCENARIO 1.
SCENARIO 1.
In order to migrate application and database instances to the new LPAR do I need to follow the procedure explained in the guide:
(*) System Copy for SAP Systems Based on SAP NetWeaver 2004s SR1 ABAP+Java Document version: 1.1 ‒ 08/18/2006
SCENARIO 2.
After create all file systems (required in AIX) to copy data from Applications and Database Instances to their respective LPARs and change the ip address and hostnames in parameter files according to the following SAP Notes:
Note 8307 - Changing host name on R3 host
Note 403708 - Changing an IP address
Which is the best scenario SAP recommends in this case ?
Thanks for your comments.

If your system is a combined ABAP + Java instance you can´t manually change the hostname. It´s not only those places that are listed in that note but much more, partially on filesystems in .properties files, partially in the database.
Doing that manually may work but since the process is not documented anywhere and since it depends on the applications running on top of the J2EE instance it´s not supported.
For ABAP + Java instances you must use the "sapinst-way" to get support in case of problems.
See note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
Markus

Importing logic pro 6 songs to logic express 7.2.1

the question is simple: i've recorded a drumkit with logic pro 6 running on mac and i tried to import the project into my imac intel but i can only open the project, the audio files format are not AIFF or WAV.
I'm sure there is something i'm doing wrong, what can it be??
Thanks!!!

Hi, now i can't remember the format of audio files. but occurs the next:
When i open the project Logic Express 7.2.1 it doesn't find the audio files, asking me to Ignore, Search automatically or Manually, i click Manually and i open the project folder but files can not be selected, its icon is grey, like EXE files from PC opened in Mac.
I'm sure it's not WAV or AIFF but if they were SD2 i could open them.
The only solution i find is opening the project on Logic Pro 6 and Bounce every track separately (bassdrum song 01, cymbal song 04 etc...) as AIFF file. It will take me the whole day so...there is a solution????
Thanks in advance!!!

Importing logical and physical model from Sybase power designer/Erwin

Hello,
We have several models created in Sybase Power designer, logical and as a well as physical. Is there a way to directly import models into Oracle designer?
Thank you for your help.
Syed

Hi Syed,
ERwin has a facility to export to Designer 2000. Of course you're probably not using Designer 6.0 or earlier so it's of little use.
I have been looking at a couple of tools for importing from ERwin: Reischmann Informatiks TOOLBUS Interface for Oracle Designer and ALLFusion ERwin; and Meta Integration Technologys Meta Integration Model Bridge (MIMB). Neither product is free (nor inexpensive) but if you've got a number of models to convert then the tools seem cheap by comparison. Also, none of the products that I've looked at recreate the actual diagrams (not that I expected them to).
I am leaning towards TOOLBUS as it provides more complete migration of Logical and Physical models (especially the linkages between the models) using Oracle Designers API rather than a DAT file as provided by MIMB.
Hope this helps,
Wayne Lehman
Avanti Business Systems Inc.

New to Logic 9, Questions about mixing with summing box.

Hello - glad to be aboard. I just picked up Logic9 last week.. I have been on DP...well since it was P (I guess 20yrs,) Been contemplating the move for quite some time, but as I too, pay the bills with music, I've got to stay on DP until I and Logic are full integrated into my system. With that being said, I am DP by day- getting things done, and when the day is done, Its Logic time. I'm in the studio on forums, watching a bunch of videos that I bought, taking notes creating "Key Command" Flash cards - just kidding on that one) - I am really looking forward to making the switch. - I was going to order DP6, as well, but I think there's no need for that... this might be the right move.
On to my question....
My setup in the nutshell - Mac2.8. with MOTU PCIe,, using MOTU audio interfaces, 2x2408mkIII's, 1x24i/o, and 1x308) - I am using 2 x Rosetta 800''s as well, and from my DAW mix out through them into a Dangerous 2BUS summing box - which means - obviously, that I group my tracks in my daw and send out various outputs (i.e, Output 1-2 might be vox, 3-4 for gtrs, 5-6 for drums, etc.) - I then run to the 2Bus, out into a TK Audio BC1 buss compressor, routed back into the Apogee, and into the DAW - where I bring the stereo mix back in. - This means (2) things
1. I have no need for a Master Fader
2. I don't bounce
There are a couple of things that are confusing me - It seems that in Logic, when i create a track, Logic is "kind enough" to think ahead for me, and not only gives me the audio track, but also another fader, I guess which acts like an overall channel strip or fader for that output. It also assigns a master fader for me as well. In DP, when i create an audio track - I get just that - an audio track. Its routing assignment is indicated by the inputs and outputs I select. If I want to route it out to inputs 1-2, then I choose that output - but nothing else pops up. If I had the need to assign a Master Fader - then I would key command to add a Master Fader. While, in the scheme of things its not that difficult to just "delete" these tracks - I am sure during the course of normal work flow, it will get old. I tried deleting the master fader (on a test project I was working on) and saving as a template. But when I opened up the template and started assigning audio tracks, the ol' master fader came back. To me, it seems like fader duplication that I really don't need to see. - I just want to see my audio tracks - and route them to their appropriate outputs from the channel strip.
I assume the automatic assigning of a master fader - would be helpful if I wasnt mixing "outside" the box, and would be required if I "bounced" my final mixes down from within Logic. - And I also would assume that these Aux channels, or whatever that are assigned when i create audio tracks, are nothing more than overall "volume: controls for that output.
Another annoying issue related to this - I have named all of my ins and outs withing the MOTU PCI interface - I then when into the I/O assignment page in Logic and requested that Logic use the names provided by the driver (my names) - it does.... In parenthesis after their's - but outputs 1-2 - keep reverting to the name "Stereo Out".... frustrating.
Again - While I will miss alot of things from DP....I actually am seeing quite a few benefits over DP and the videos.. while not as useful as hands on work... are training me to see the screens, workflow, etc - and they are very helpful. When I do go into mess around - I am much farther ahead.. and at least know kind of where I am.
But I'm really trying to minimize the impact of the switch.... so perhaps some of the long-time guys can asssit. I havent seen much on the various forums about diverting from logic's norm out into summing boxes....etc.
Thanks very much - sorry about the long winded message - But I wanted to explain it the best I could.
kj
orcasound

Hey Orcasound, welcome to the forum, and also welcome to Logic.
Nice setup BTW, especially the Dangerous 2BUS into the BC1 coming back to the Rosetta 800"s, that gonna sound sweet mate.
OK Q1: The master fader for output 1-2 is always gonna be there, I've never found a way of getting rid of it, you can fortunately set up the mixer so that it won't show though. At the top of the mix window is a heap of boxes highlighted in blue, all you need to do is deselect the master and the output as per this screen shot:
Save this in your template and you'll never have to see those pesky faders again.
Q2: Same thing really, logic will always show 1-2 output as stereo out. Which is annoying, even if you manually name them from the I/O labels window it's always stereo, everything else if fine apart from 1-2. To be honest I've just learned to live with it.
Glad you made the switch, I find DP to be bloated and a bit tired nowadays.

Import from Camcorder question, what resolution?

I just bought a Sony HDR-TG1 camcorder, pretty happy with it. I have a question about importing, if I import AVCHD format using 1080 import, it takes up a lot of harddrive space, is there any advantage since I am not going to do a lot of editing, just wanna burn dvds. Thanks Alex

You need to create a disk image (using disk utility - which is in your Applications/Utilities folder). The disk image must look just like your camera's disk. In particular, it must have ALL the files and folders that are in the directory structure of your camera's hard drive, even if they are empty. Some of these "empty" folders, by being present in the root directory, are how iMovie knows that this is a supported camera.
Now, look at your Memory Stick in the Finder, and select right-click/GET INFO. This will tell you how much space you have used on your Memory Stick. You will need to create a disk image at least this big.
Go to disk utility and create a NEW image. Make sure it is read/write. You can use the Custom setting to choose a size large enough for the files on your Memory Stick.
After you have created the blank disk image, mount the image on your desktop and open it. Open a second finder window and open your camera's memory stick. Select ALL the files and folders on your camera's memory stick, and drag them to the disk image. Now, you should be able to disconnect your camera, and eject the disk image. If you start up iMovie, and then mount the disk image again, iMovie should recognize the disk image as a camera.
(I recommend using the custom size and creating a blank disk image, then dragging into it. It also works to directly create a disk image of your memory stick. The problem with this method is that you can waste a lot of disk space. For example, I have an 8 GB SDHC card. Lets say I took 4GB of footage, and I want to archive it and import it so I can re-use the card tomorrow. If I use disk utility to create a disk image of my SDHC card, I will have an 8GB disk image with 4GB of empty space. That is why I create a new, custom image of, say, 4.1GB in size.)

Importing Java Class Question

Hello,
Sorry for such a newbie question and such a long post, I did remember how to do this before but now I can't for the life of me remember. Anyhow, I have a simple question about importing custom-made java classes, from another directory in the windows operating system. I have the classpath set, and also I realize that because the two files below are in the same directory theres no need for an import statement as Java will look for the class in the same directory.
But I would like to know how the import statement is suppose to look to import a custom made java class from another directory, (assuming of course that I set the correct classpath)
here's the java class location:
c:\school\csc365\narcus.java
//narcus.java
import java.io.*;
class narcus implements Comparable
String firstName = "firstName";
String lastName = "lastName";
     public narcus()
     firstName = firstName;
     lastName = lastName;
     public narcus(String f)
     firstName = f;
     lastName = lastName;
     public narcus(String f, String l)
     firstName = f;
     lastName = l;
public String getFirst()
return "first..";
     public int compareTo(Object e)
     return 1;
Here's the location of the driver program thats suppose to use the narcus.java class
c:\school\csc365\test.java
//test.java
//import statement? maybe import "c:\\school\\csc365\\*"; ?
import java.io.*;
class test
public static void main(String[] args)
     narcus jim = new narcus();
     System.out.println("omg\n");
     System.out.println(jim.getFirst());
And also, here is my classpath:
PATH=c:\school\csc365\;c:\school\
The classpath also points to the jdk libraries and few other directories but I didn't write that above, as it probably isn't relevant.
I've tried the following import statements.
import "c:\\school\csc365\\narcus.java";
import "narcus.java";
import "c:\\school\\csc365\\*";
But I keep getting an error that says:
test.java:1 <identifier> expected
Any help is appreciated!

Hi Folks,
I am new to this forum, heard that interesting discussions always happens on this forum so immediately registered,don't want to miss any oppurtunity to participate in discussions.
I have pretty much basic question regarding compiling and exceuting files in different packages.I have the following directory structure
C:\Projects\WDPROEast\Development\CommonService\Code\Java from where java files stored in different packages as follows:
com\wdpro\commerce\common\crm\dae\nautilus\adapter directory has java files in com.wdpro.commerce.coomon.crm.dae.nautilus.adapter package.
com\wdpro\commerce\common\dae\exception has java files with package named com.wdpro.commerce.common.dae.exception.
com\wdpro\commerce\common\dls\exception has java files with corresponding package name.
com\wdpro\commerce\common\dto has java files under proper package name.
com\wdpro\commerce\common\exception has java files with appropriate package name.
com\wdpro\commerce\common\util has java files with package name. I am starting at Java Directory,want to compile and run file named a.java in com.wdpro.commerce.coomon.crm.dae.nautilus.adapter package with having all other java files on classpath as follows
so I issued command for compilation as follows C:\Projects\WDPROEast\Development\CommonService\Code\Java>javac com/wdpro/commerce/common/crm/dae/nautilus/ada
pter/a.java com/wdpro/commerce/common/crm/dae/nautilus/adapter/NautilusServiceUtility.java com/wdp
ro/commerce/common/crm/dae/nautilus/adapter/URLReader.java com/wdpro/commerce/common/crm/dae/nautilus/adapter/
b.java com/wdpro/commerce/common/dae/exception/*.java com/wdpro/commerce/common/dto/*.java
com/wdpro/commerce/common/exception/*.java com/wdpro/commerce/common/util/*.java com/wdpro/commerce/common/dl
s/exception/*.java It compiled greatly but when I issue command to run a.class file as
C:\Projects\WDPROEast\Development\CommonService\Code\Java>java com/wdpro/commerce/common/crm/dae/nautilus/adap
ter/UtilityAccesssit's giving following exception
Exception in thread "main" java.lang.NoClassDefFoundError: com/wdpro/commerce/common/crm/dae/nautilus/adapter/
UtilityAccesssbut when I run a.java with the following command
C:\Projects\WDPROEast\Development\CommonService\Code\Java>java com/wdpro/commerce/common/crm/dae/nautilus/adap
ter/UtilityAccess com/wdpro/commerce/common/crm/dae/nautilus/adapter/NautilusServiceUtility.java com/wdpro/com
merce/common/crm/dae/nautilus/adapter/URLReader.java com/wdpro/commerce/common/crm/dae/nautilus/adapter/Nautil
usAccessUtility.java com/wdpro/commerce/common/dae/exception/*.java com/wdpro/commerce/common/dto/*.java com/w
dpro/commerce/common/exception/*.java com/wdpro/commerce/common/util/*.java com/wdpro/commerce/common/dls/exce
ption/*.javaSo my question do I need to add all required java files to path when required class files are under different packages?is it manadatory.
I hope you understand my question,pass me any comments you may have.
Thanks alot,
Anu

VERY IMPORTANT FOR LOOP QUESTION

public class ForTest2 {
     public static void main(String args[]) {
          int i=0, j = 0;
          for (j=0; j < 10; j++) {
               i++;
               System.out.println("i is: " + i);
               System.out.println("j is: " + j);
          System.out.println("Final i is: " + i);
          System.out.println("Final j is: " + j);
}j ends up being 10. Why? It should only be 9. This is as when j is 10 the for loop fails, so j++ shouldnt happen.

First, please, please, please stop using all caps. It's extremely annoying.
Second, don't mark your question as urgent or important. It is 100
% guaranteed NOT to get you help any faster, and it might just delay you getting help because it's annoying.
As for your question, you're misunderstanding how the for loop works. j HAS to become 10 for it to end. The loop body executes as long as j < 10. If j didn't become 10, the loop body couldn't terminate, because j<10 would always be true.
The body is executed, the j++ is executed, then the j<10 is tested.
int j;
for (j = 0; j < 10; j++) {
    // body
// is equivalent to
int j;
j = 0;
while (j < 10) {
    // body
    j++:
}

Importing desired text question.

I'm new to applescript and I was wondering if anyone had tips on how to fix this problem with this script I was working on.
If im trying to write a command into terminal it looks something like this.
activate application "Terminal"
     tell "Terminal"
     do script "sudo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'Text inserted here'"
end tell
But what I need to know how to do is something along the lines of this
set desiredtextQ to display dialog "Please enter your desired text." default answer "Text Here" buttons {"Continue", "Cancel"}
set desiredtextA to text returned of desiredtextQ
activate application "Terminal"
     tell "Terminal"
     do script "sudo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'desiredtextA'"
end tell
So basicly all I'm trying to do is take the text returned of a question and import it into a scripted terminal command.
I would be thankful if anyone had any help to share with me.

First off, avoid scripting Terminal.app. For most purposes, including this one, there is no need and you are far, far better off using AppleScript's do shell script, which can execute a shell command without needing to invoke Terminal.app.
Therefore, I'd rewrite your first script as:
do shell script "defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'Text inserted here'" with administrator privileges
Note that I've also nixed the 'sudo' component in favor of do shell script's '... with administrator privileges'.
As for the second part of your question, integrating a variable, that's just a matter of concatenating the strings using the & character:
set desiredtextQ to display dialog "Please enter your desired text." default answer "Text Here" buttons {"Cancel", "Continue"} default button 2
set desiredtextA to text returned of desiredtextQ
do shell script "echo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText " & desiredtextA with administrator privileges
Note that if the text from the dialog includes (or might include) spaces or other shell-unsafe characters you might need to quote the text, like:
do shell script "echo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText " & quoted form of desiredtextA with administrator privileges

Importing projects / sequences question

I started out my project with the wrong resolution (*sigh*) and I'm now trying to save the day by doing the recommended move - starting a new project with correct settings and importing the original project there.
But I'm only getting the entire original project sequence as a big block, with no edits or anything available. Is it supposed to be like that? Or is there a way to get all the separate clips, cuts, edits etc when importing?
Thanks for any help!

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Importing one table question

I have a DMP file and I want to import all tables except one (it's a large table). I know I can do that with a parameter file, but my question is, can I.........
import all but the 1 table (the large one), start the import of that 1 table and have people start using the DB while that one table is importing. This large table does not have critical data they need to access right away so my thought was that I could import everything else first (small amount of data), start the import of the large table and they users could access the DB while that 1 table is importing.
Due to special circumstances IMP/EXP is their only backup solution (please no lectures on that, I KNOW, I know....., but it is what it is)

I can't think of anything that would prevent this from working. You just need to make sure that the large table does not have any ref constraints, or other associations with the other tables that may get screwed up while the other users are using the database.
Dean

Import Packages - A Question to All Java-Professionals

Question:
I installed the J2SE 1.3.1_02, J2EE 1.3.1_01 and Forte Java CE 3.0. Why I can't use the Packages included in the j2ee.jar located in the \bin directory?
I can't use the Packages like
import javax.jms.*;
import javax.sql.*;
Why? Please to all Java-Experts. Thank you very much

sorry this is kinda late, no I dont use forte, I use codewarrior , and I have not used the j2ee.jar but I have used the servlet.jar , activation.jar, and mail.jar . And I simply add a refrence to those files and Codewarrior sets the classpath for me.

Importing/Exporting + syncing Questions

Hi there,
just a question with regards to Importing/Exporting + syncing .
First of all, is it possble to sync Yahoo Calendar with iCal, or is there a cool widget/tool that does so in real time?
Second, I currently have a Mac at work running 10.2.8 and would like to somehow sync to my Mac at home running 10.4.8 without exporting/importing from media devices. The Mac at work is always online running through cable connection to outside world... My Mac at home is connected to a switch and than through adsl modem to outside world... What is the best way to connect the two through the Sharing setup in System Preferences
thanks

I'm interested in the same sort of thing. i have a Desktop at home and a laptop on the road. Usually with other files and apps, I just copy the files to my lap top before I leave, but with iCal, I do not know where the 'file' is...?

Toast 7 Importing and Editing Questions

My story so far is, I got most of a short project done in iMovie 3.0.3, but one of my songs near the end is hopelessly screwed up by two seconds of phantom sound which can't be seen and can't be deleted. Through trial and error I determined the sound was on the soundtrack, not in the clip.
My question is about importing from more than one iMovie project into Toast 7, and editing the content to be actually burned to DVD.
If I put the song currently being messed up in the order it's supposed to be on one copy of the project, the audio at the end of the project will almost certainly inherit THE CURSE OF THE PHANTOM SOUND.
What if I do that in one copy, but leave it where it is in the other copy? Can I import just the good copies of each song in the project to Toast 7, even though it means importing from two different copies of the project? Or do you have to import the iMovie project as a whole?
If you have to import all of each copy of the project as a whole, will Toast 7 get all screwed up and start complaining before I even get a chance to delete the duplicates, as it would be two copies of things with the same names in slightly different order?
IF I CAN'T DO THIS, it will mean upgrading to another version of iMovie and a whole other set of problems and questions.
Thanks for anything that may help straighten me out or set me on the right path.

To phrase it another way, how much, if any, editing is possible in Toast? It might be simpler to keep both copies the same, put in however many minutes of black space would cover over the bad audio spot, then put the end of the project after that. But in Toast, can I edit the black space down to just the ten seconds I want? Or do I have to burn the whole thing "as is" and then do the editing when I dub from the DVD to the VHS tape?

Basic Logic Pro Questions. I Am New To It

Running OS 10.7.4
Hello....I am new to Logic Pro, graduating up from GB. I have few simple questions that I will ask on my next One to One, but I thought someone in Logic Pro Land can help for now. Just be patient I am trying to understand concepts
1. My One to One instructor here in NYC, down in the SoHo Store ( the best), helped me create a templete track, so I never have to listen to clicks or a metronome again ( I do VOs)....
2. I have done some recordings on that template I saved it as COMPING, as that's what I want to learn at my next one to one.... That track is my Logic Pro file in music.
3. Based on that, all I want to do now is duplicate the template track. Is there a way to do that?
My own logic tells me...well if the track is saved under COMPING, all you got to do is launch Logic Pro.... the last track will come up (COMPING)..... so just delete the contents ( since it's saved) record what you want to record, and save it under a different name...for the sake of simplicity, let's say I want to call it VO Track Number 2.....that track will appear in my folder under VO Track Number 2.....Is this correct?
4. Barring that, is there another way of just duplcating the template track without having to name it something all the time, or perhaps name different duplicate tracks, Track 2, 3, 4, etc.?
Recording questions
I recorded take one of a beer commercial. When I stoped the recording the head was right at the end where I stopped...when I went to record take 2, instead of just contuning, it back tracked a bit so the last few words on take 1 were recorded over.
1. WHY?
2. How do I prevent that from happening?
In GB, the recording just picked up where I left off, never back tracked...
Anyanswers, greatly appreciated...

Next time, make a copy of your template before you record anything, in fact, save it as a template so a pristine copy will always be available under the "Templates" menu item. Then start the first project as VO-1 then VO-2...etc. Never start a project and save it the same name as your template.
Now you have to go in and remove the files from the arrange and Audio Bin or else they will stay associated with the project.
As for the recording, the last few words were not recorded over, they were just covered up.
The back tracking is due to the one bar count-in or you have some "preroll" set. Does it backtrack 1 bar?
I think the adjustment is under "Settings/Recording".
I'll let others jump in and fill in the holes.

2 important Logic 9 questions

Similar Messages

Maybe you are looking for