2 infopackages for same infosource in Delta

Hi,
I have to load data in 2 infopackages with initialisation update under same Infosource.
Whether it is possible to do delta loading in 2 infopackages which is under same info source?

hiii,
Ya it is possible to load data in to InfoPackage . Even so many times u must seen 2 InfoPackage for full and delta upload.
Actually delta could have 2 InfoPackage but both usually not absolutely same. Their must be some difference in it. But in data target is same so their will be no problem.
I hope this will be beneficial for u.

Similar Messages

How to intialize delta for another ODS with same infosource

Hi Experts,
We have one ODS having update routines , daily DELTA loads are ruuning in production system.Now we got one requirement like need to develope another ODS with different update routines on the same infosource. is it possible ? if we do means is there any effect for 1st ODS ? please suugest me how to do that ..its in production system ...little bit urgent..
Thanks & Regards
pcrao.

hi,
just create another ods2 ,but take the infosource as template and then at the time of update rules ,take again infosource as template.ok.
and then go for creating infopackage and schedule it.
before scheduling check the time of scheduled time for the ods1 as one of our frnds said.
if u want any update routines first do them before scheduling.
thatsit..

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

Two infopackages for the same DS-- IS combination initialised

Hello Friends,
Can we have two infopackages for the same DS-->IS combination initialised with the same selections conditions and init requests. I have seen this in my client system. How can this be achieved.
Thanks for your help.
---Simmi

That is not possible.
Are you sure Inits were done for same selections ???

Two ODSs share the same InfoSource but with different updata mode load?

We've got two different ODSs (ODS1 and ODS2) for two respective clients (client 1 and client 2). Client 1 has already going alive and in the InfoPackage, we only pick up ODS1 (Client 1) as feeding target and we have conducted initial load and several times of Delta loads for ODS1 (data load daily). But now we are going to start to load data to ODS2 (Client 2) and at the same time we will have to continue our delta load to ODS1.
It could not be possible that the two ODSs will be feeded data with different pace (ODS1: continue delta load, ODS2: initial load) if they share the same InfoSource. Then what's the best way to resolve this issue?
Thanks

hi Pradip,
Tell you a bad news that the solution doesn't work on two of the EBP (a source system which is similar to R3, we've got 4 EBP ODS/InfoSources, but two of the four don't work with the last step listed below) ODSs/InfoSources. The steps I took on production are:
1. Conduct Full Repair data load to ODS2;
2. Delete init option of ODS1 from Scheduler menu;
3. Run Init without data transfer to set delta pointer for both ODS1 and ODS2.
But the last step to run Init without data transfer has taken 1 whole day and eventually becomes red since it takes so long time to set delta pointer.
When I said our solution worked is that I conducted the test on our GL ODS and the Init without data transfer took about 1 hour to finish.
Also when we conduct the last step to do the Init without data transfer to click Start button to set pointer, a msg box titled "Activate ODS Data" pops up saying that "No requests have been selected for activation. Do you want to make a selection, or activate all the requests?" with buttons "Activate all requests", "Select requests" and "Cancel". If clicking the button "Select requests", another msg box pops up to prompt to input a Date range, we didn't input any date range, just click continue, then the Init without data transfer will run forever!
Thank
Message was edited by: Kevin Smith

RSA3 data in R/3 and PSA data in BI are different values for same Doc No.

Hello BI experts,
I have a weird situation in BI. RSA3 and PSA are not reconciled for same Doc no.
Data Source: 0FI_AR_4 (enhanced in user exit with some custom fields as well)
Extracting data using Infopakcage in BI as a Init load into PSA.
The values in RSA3 in R/3
Doc No           Amount
1400003125      714.29
The values in PSA in BI
Doc No           Amount
1400003125     581.56
Anyone come across this situation. Any help would be greatly appreciated.
Thanks much,
Anil

1. yes selections are same in RSA3 and in Infopackage
2. Yes pulling all data records in RSA3. Thats only record exits for that doc#
3. Its not a delta, we are pulling in RSA3 all records and Initial load to PSA.
Thanks much,
Anil

The same InfoSource in multiple SAP systems?

Hello,
In my BW system I have got a mySAP CRM and a mySAP ERP source system delivering data.
But both systems provide the same DataSources. The mySAP CRM system provides sales data and the mySAP ERP system as well. If I put in RSA1 -> Source systems -> DataSource overview, I recognize that both systems have provide the same datasources.
What is the difference between the data each system provides, how could i check this?
Which data from which system should I use for analyzing purposes?
Could I use one InfoSource and connect DataSources from both systems and create an InfoPackage writing the data into the same InfoProvider?
Thanks in advance!!!

Thanks a lot Roberto,
I have got one more question in that context.
If I use one InfoSource, connect two different DataSources, create an InfoPackages for each one and load the data (from both InfoPackages) into the same InfoCube, what will happen?
Does the InfoCube contain redundant data (data from both systems), what data does the InfoCube contain?
I am not familiar with the connection between mySAP ERP and mySAP CRM. Does the mySAP CRM get its data from mySAP ERP? What is the connection?
Does a mySAP ERP system have the same data like a mySAP CRM system regarding DataSources like SD-Delivery (2LIS_01_S261), 2LIS_01_S263, 2LIS_01_S260, etc?
Why do both systems have the same data like the SD ones?
thanks a lot

Update types in infopackage for generic data source

Hi,
Suppose if we create a generic data source,then
1) What are update types availbale in infopackage for tha generic t data source?
2) Is there any link between,the selection on the
i) type delta type select
ii) the field selected i.e like timestamp,cal month,numeric pointer.
3)do we have delaa option at info package level?
I think you understood my doubts.
Regards
Naresh.

hi siva raju,
yes our's is bi 7.0.but there are two DTP with the same optoion of DELTA.It pull the data from ds to info cube.
one more thing,how are the delta records picked from the r/3 to bw?its through Infopackage Am i right?
If possible please tell me the entire flow of data goes for a generic data source.
i.e
how to load data?
how to set delta?
how do we load deltas to bw.?
Regards
Naresh.

How to create infopackage for Cube to Cune to transaction

HI Experts
I have performed following steps for cube to cube load.
1. Created source cube and loaded the data from R3
2. Created Destination cube
3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource. its not showing up any name with 8ZFIGL_C01.
Kindly let me know how to create infopackage for this to laod the data from cube to cube.
Additional information:
I have set the optopn Display Generated Object in Settings.
Thanks in advance for your help.
Regards
NLN

Hi,
Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
See solution from SAT:
Problems with Infosource Data Marts
Best regards,
Frank

Infopackage for updating hierarchy doesn't work in process chain

All:
I have infopackages for Cost Center and they are part of a process chain. While cost center master data get populated after the process chain runs, cost center hierarchy does not get populated. Infopackage for cost center hierarchy is also part of the process chain.
However, when I manually run the same infopackage (for CC hierarchy) cost center hierarchy in BW (BW 3.5) gets populated.
Could anybody suggest what is wrong here?
Thanks,
Pranab

Hi,
Did you include "Attribute Change" process in your process chain which will activate the saved hierarchy? Otherwise the new loading hierarchy will be kept as "M" version instead of "A" version.
Joe

No Hierarchies for this InfoSource in the Source System

Hello All,
I want to find out how to get my hierarchy back in Bex (Query Designer). We just got a new BW system. The hierarchy was loading fine in the old system but unable to see it in the new system. I have done the following and still no luck:
Replicated the Datasource
Replicated the Source System
Maintain Hierarchies shows no hierarchies and when I click on create hierarchy (No values when you click on Hierarchy Name). Whereas I get hierarchy values in the old system.
In the Infopackage, click on Hierarchy Selection => Available Hierarchies from OLTP, I get "There are no Hierarchies for this InfoSource in the Source System".
Is there anything am missing? My suspicion is may be the Hierarchies need to be maintained in ECC first and then I should replicate again and then load the hierarchy.
Any suggestion would be appreciated.
Thanks,
Recca

Thanks Sai and RDS.
@ Sai: Yes, the Datasource is present in BW as 3.x version which I assume is ok. It is also present in active version in ECC in RSA6. There is nothing to load for the hierarchy because when you click on the InfoPackage the "Hierarchy Selection" and then "Available Hierarchies from OLTP", in other to refresh the list, I get "There are no Hierarchies for this InfoSource in the Source System".
@ RDS: Yes, the connection of BW to the ECC Source System is good....checked out ok. There is nothing to load for the hierarchy because when you click on "Hierarchy Selection" and then "Available Hierarchies from OLTP", in other to refresh the list, I get "There are no Hierarchies for this InfoSource in the Source System".
Besides RSA6 to check the datasource in active version in ECC, do you have a T-Code to check where these following Hierarchies are maintained in ECC? I need to compare it from the old system with the new system.
1. Fund
2. Fund Center
3. Commitment Item
Thanks,
Recca

Option in Infopack for Load of Repeat Delta

Hi , I would like to know what option is avilable to load repeat delta in Infopack.
When i run RSA7 , and select by Datasource , There is 28 records in the Repeted Delta Queue.
Thanks

Hi Ashwani,
If a delta load from a datasource fails or is manually marked as 'RED' in the monitor, the next time you run the 'Delta' InfoPackage for that datasource, you will get a message asking you whether you want to repeat the previous delta request since it had failed. This mechanism is provided so that in case of errors during data loads, none of the records are missed out in a subsequent load.

Wht is the relevant for BW Flag option in the infopackage for loading Hier

Hello Gurus,
Whta is the relevant for BW Flag option in the infopackage for loading Hierarchies? What happens when you turn this on?
Thanks
Simmi

As the hierarchies are stored in combination with the OLTP system, when you tend to load from a flat file, the system doesnt allow you to maintain this feature, as this hierarchy would be relevant to BI.
Diagnosis
The relevant hierarchies in BI are stored according to the combination DataSource/source system.
If you want to change the selection of BI-relevant hierarchies, this change is effective for all InfoPackages that have been created for the same DataSource/source system combination.
Procedure
Check all other InfoPackages for DataSource 0COSTCENTER_0101_HIER and source system PRDCLT100 to see whether the change executed is also appropriate for these InfoPackages.
Procedure for System Administration
If you want to load a hierarchy in a different InfoPackage (which will be marked as non BI-relevant as a result of your changes) the selections made for this InfoPackage will be lost and The InfoPackage can no longer load.
Errors will occur when you start the InfoPackages. The monitor produces an error message to say that a valid hierarchy selection has to be made.

There are no hierarchies for this InfoSource in source system

Hello Gurus,
We have recently created an extractor for the Country hierarchies, these are the steps we took:
SBIW->Settings for Application-Specific DataSources (PI)->Profitability Analysis->Create Hierarchy DataSource (TC: KEB1)
We informed the infoobject 0country and the characteristic KMLAND.
We replicated the datasources, created the transfer rules in our dev. system and loaded the required hierarchy with success.
We transported our requests to our prod. environment. and when creating the infopackage for the hierarchy we get the message "There are no hierarchies for this InfoSource in source system". We have checked in our R/3 system and the hierarquies are there.
Are we missing something in the process so that we may see the available hierarquies?
Thanks!!! Points will be rewarded.

Hi Sumit,
You were correct, the request did not transport the contents of the table TKEBWLH. There is a note from SAP which corrects this problem, note 856895. v02. After applying the note and recreating the request, we manage to see the available hierarchies in our Prod. System.
Thanks for your help!
Regards,
Elder

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

2 infopackages for same infosource in Delta

Similar Messages

Maybe you are looking for