2 ipads with same data

We have ipads for our board members and one board member had to use the superintendent's.  After the meeting, we thought they left it again.  Next meeting, they brought theirs and both ipads are the same.  Their personal stuff is on both ipads.  They said that they used icloud.  How do I get their stuff off of the superintendent's ipad?  If I delete their account on the superintendent's ipad will it delete it off the other??? 

You would need to confirm with AT&T, but to the best of my knowledge a data plan cannot be shared; you'd need a plan for each iPad.
Regards.

Similar Messages

  • Need to create a new row in table with same data as Primary key, but new PK

    Hello Gurus ,
    I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
    Any ideas of how it can be done without much complication?
    Thanks in advance for your reply.
    Reards,
    Swapneel Kale

    user9970447 wrote:
    Hello Gurus ,
    I have a table with one column as primary key, I need to create a new row in the table, but with same data as in one of the rows, but with different primary key, in short a duplicate row with diferent primary key ..
    Any ideas of how it can be done without much complication?
    Thanks in advance for your reply.
    Reards,
    Swapneel Kalesomething like
    insert into mytable values ('literal for new pk',
                                           select non-pk-1,
                                                    non-pk-2,
                                                    non-pk-n
                                           from mytable
                                           where pk-col = 'literal for existing pk')

  • MRP split purchase requisition with same date

    Hi guru
    When I run MRP, if there are more requirements for the same material with same date, the system creates one purchase requisition grouping requirements.
    So, if I have two requirements of 3 and 2 pieces for material A, with date 18042015, the system creates one purchase requisition of 5 pieces
    I tried to use a BADI in order to split purchase requistion and have in this case a purchase requisition of 3 pieces and another one of 2 pieces but maybe I wrong something because MRP works wrong.
    Is there anyone that could give some tips about this request? Is there anyone that had same problem?
    Thanks
    Regards
    Raffaele

    Hi,
    Hope your BAdI is working now.
    MD51 is used for project. It creates replenishment orders against a WBS element. After this, you can run MD01 which will create replenishment order by material/plant level.
    If you have a question related to PS, maybe you can post your thread in this space:
    SAP Project Systems (SAP PS)
    Kind Regards,
    Mariano

  • Let all channels(with same data structure)run one program

    Hello,
    I want to let all channels with same data structure run one program,how can i program it?
    Thanks!

    Hi charleen,
    You're going to need to provide more details for us to help you.  In general "channels" do not "run" programs.  You can, however, run a program which loops over channels, checks their properties, and decides whether to include them in the overall analysis.  What do you mean by "data structure"?
    What do you want to actually happen in the "program"?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • No sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem.

    no sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem. No sounds coming out from the speakers, even after reset everything. Mute button is assigned for mute function instead of screen rotation lock.

    Hi herbie13!
    It sounds like you will still want to link your iPad and computer, but you want to prevent the iPad from syncing information from your computer to your iPad. I have an article here for you that can help tell you how to set this up:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    You will want to follow the steps here to set up the iPad for syncing, but when it comes time to sync, you'll just want to make sure that the boxes for syncing the multitude of items that you can sync remain unchecked so that none of that information gets synced into the iPad.
    Another note: your second Apple ID will not be able to access the apps, music, movies, tv shows, etc., that you have purchased under your primary Apple ID. Even though it seems that the secondary Apple ID still has access to those items, that is just because you are viewing your second Apple ID through the iTunes Store section on your computer and you have those items saved locally on your computer. You will need to repurchase and download all of the content that you wish to use again on your second Apple ID, if that is what you wish to solely use on this iPad.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • HT4108 can I use my IPAD with a data projector?  and does the data projector have to be an iOS compatible one?

    can I use my IPAD with a data projector?  and does the data projector have to be an iOS compatible one?

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    Apple - AirPlay - Play content from iOS devices on Apple TV
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    iOS: About Apple Digital AV Adapters
    http://support.apple.com/kb/ht4108
     Cheers, Tom

  • Help to fill BPS Cube with same data in a Cube with these conditions

    Hi,
    I need some help in implementing BPS in a small project. (Integrated Planning is not available).
    An existing cube, Cube1 has: Year/month, Year, char1, char2, keyfig1, keyfig2
    Keyfig1 is filled directly from R3 with actuals; keyfig2 (planned values) is  filled manually filled with a monthly flat file load.
    Now, there is a change in direction to fill keyfig2 through BPS features and bring in additional key figures all based on keyfig1.
    Cube2 has been created only for the purpose of this BPS project. Cube2 was a copy of Cube1(with no data). For Cube1, I have created a Planningarea1 and PlanningLevel1; and for Cube2, Planningarea2 and PlanningLevel2 in BPS0.
    How do I fill the BPS Cube2 with the same data as in BPS Cube1 with the following conditions:
    keyfig1 : same as source value from R3 (not modifiable)
    keyfig2 : modifiable by users only on the first and second of the month.
    keyfig3 : keyfig1 * 1.1
    keyfig4 : keyfig1 of previous Year/month 
    keyfig5 : same as source value from R3 (But modifiable)
    keyfig6 : same as keyfig5 as of last day of 20th of the current month (not modifiable)
    The goal is to create a multi planning area to join the two cubes. Hints all that will also be appreciated.
    Thanks

    Your thought of having a multi area is right.
    Create a multi area and being the basic areas to which you have assigned cube 1 and cube 2 underneath the multi area.
    UNder your planing package, create a function of type Formula and create a parameter set like this:
    = * 1.1.
    Just this one line will is enough.
    TO get keyfig 4 as previous month's key fig; you need another fox. To do this, you need to have a BPS variable to et previous month and use this variable in the parameter set.
    Your fox will be like this.
    DATA CURRMONTN TYPE 0CALMONTH.
    DATA PREMONTH TYPE 0CALMONTH.
    {KEYFIG4, CURRMONTH} = {KEYFIG1, PREMONTH}.
    To make users modify only on days 1 and 2, you need to define a dara slice.
    Ravi Thothadri

  • Problem with different resultset with same data and same query in Oracle 8.1.7 and 9i

    Hello,
    I have been using this query in oracle 8.1.7
    SELECT
    ID,
    AREA_NO
    FROM MANAGER_AREA MGR
    WHERE COMPANY_ID = :id AND
    (:value < (SELECT COUNT(ROWID)
    FROM MANAGER_WORK MW
    WHERE MW.AREA_ID = MGR.ID AND
    (MW.END_WORK IS NULL OR MW.END_WORK >= SYSDATE)))
    order by AREA_NO;
    In the above query I want to see rows from MANAGER_AREA table depending upon date criteria in the table MANAGER_WORK and also upon the parameter :value i.e if I pass a value as 0 I get to see records for which their is atleast 1 record in MANAGER_WORK with the date criteria and if I pass -1 then I get all the records because minimum value that count(*) would give is 0. The resultset was as expected in 8.1.7.
    A couple of days back I installed PERSONAL 9i to test for testing the basic functionality of our program with the same data. This query fails and irrespective whether I pass -1 or 0 it returns me same dataset which I would have got in case if I pass 0.
    I do not know whether this is a bug that has got introduced in 9i. Can anybody help me with this problem. It would be difficult for me to change the parameter send to this query as the Query is called from many different places.
    Thanks in advance
    Amol.

    I cannot use a Group by and a having statement over here. The problem with 'Group by' and 'having' clause is If I have to make a join between the two tables. When I use join then I get only rows that are linked to each other in the table.
    If I use outer join to solve that problem then I have to take in consideration the other date condition. My previous query use to virtually discard the corelated query result by using -1 as the value. This will not happen in the join query.
    Amol.

  • Employee Information with same date

    Dear All,
    Can any one tell me how to retrieve employees who hires on same date?
    Thanks in advance.

    /* Formatted on 7/30/2012 1:29:04 PM (QP5 v5.139.911.3011) */
    WITH t
            AS (SELECT 'a' empl, TO_DATE ('31-12-2012', 'dd-mm-yyyy') hire
                  FROM DUAL
                UNION ALL
                SELECT 'b' empl, TO_DATE ('31-12-2011', 'dd-mm-yyyy') hire
                  FROM DUAL
                UNION ALL
                SELECT 'c' empl, TO_DATE ('31-12-2011', 'dd-mm-yyyy') hire
                  FROM DUAL
                UNION ALL
                SELECT 'd' empl, TO_DATE ('5-12-2012', 'dd-mm-yyyy') hire
                  FROM DUAL)
    SELECT *
      FROM t t1, t t2
    WHERE t1.hire = t2.hire AND t1.empl != t2.emplc     12/31/2011     b     12/31/2011
    b     12/31/2011     c     12/31/2011

  • ArrayCollections with same data source

    Hi Everyone,
    Recently I got in a project which use Tree objects to visualize and manipulate objects. The data source of this object must to be the same but with different visualizations. In some views this tree will be filtered and in other places it won't. The data source must to be kept consistently, if an object is update in a tree, it should reflect the updates in the other Trees.
    My question is quite simple, does ArrayCollections are really expensive objects in terms of memory even using the same data source? Or does it have to do with the fact they are manipulating different datasources as well?
    Please share your experiences.
    Thanks

    Hi,
    ArrayCollection is a very useful construct.
    http://blog.flexdevelopers.com/2009/03/flex-basics-arraycollection.html
    Just make sure you clean the open nodes and it will perform fine.
    http://kb2.adobe.com/cps/897/cpsid_89785.html#products
    That is my two cents
    Best

  • How can I iMessage from iPhone to iMac or iPad with same apple ID?

    Hello!
    I have an iPhone, iMac, and iPad with the same apple ID. How can I message between them with out having a duplicate message from "me" showing up on all my devices at once.
    Is it possible to iMessage between two devices with the same apple ID?
    Thank you for any help.

    HI,
    I do it similar to that on my two iPhones.
    I had an Apple ID (based on an old Dial up account.)
    I linked this to iCloud and got an @me.com address as well.
    Although iCloud, iTunes and logging in here as Apple Support Communities all end up at the same place whether I use the dial-up email address or the @me.com one, the iMessages server treats them like two separate IDs
    One phone then uses thre @me.com name and the other uses the old Dial-up ID
    Now that Apple have also given me an @icloud.com name I could use that on my iPad.
    8:24 PM      Tuesday; December 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Regarding multiple schedule lines in sales order with same date

    Hi All,
    we create the Orders from RFC and the orders are going to Multiple Schedule lines for the same date.
    period       delivery date          ordered quan       confirmed quantity
    D     10/11/2007                10                    0
    D     10/11/2007                 0                     10
    here for the same date in first line it is not confirming and in the second line it is confirming the quantity for the same date.
    On what conditions it is possible??????
    Any one have the solution for this Please send it to me [email protected]
    Regards,
    Prasad

    Just check the schedule line details i.e go to schedule line---shipping. You will find that although the del. date is same in both the case but the timings were different e.g material availability time etc will be different in both these lines. So though the dates may be same its time difference that's causing the second schedule line.
    Reward points if useful

  • IPad with wpad.dat

    There seem to be many people with this problem, but no solutions - only workarounds.
    We are creating a Guest WLAN using Cisco WLC contollers and web authentication.  On the iPad, everything works except for the Proxy auto detect.  Yes I know there are manual work arounds, but what I want is for Web Proxy Auto Detection to work correctly.
    We are serving wpad via DNS and this works fine on PC's - but not iPhone and iPad.
    Any help would be greatly appreciated.  If anyone knows for certain the WPAD does not and will not work on iPhone and iPad - please let me know so I can stop searching.

    I have exactly the same problem, using TMG 2010 as a proxy server. iPads do not want to detect the proxy using wpad.dat.Tried using:
    http://wpad/wpad.dat? in option 252 in DHCP, this makes no difference.
    Tried upgrading to IOS 6.1, this made no difference either.

  • TS1702 I played HayDay on my iPhone until the app shut down very shortly after loading.  Then repeated that all on my iPad with same results, even though I am signing in through the Game Center.  Why doesn't the app stay open so I can play this enjoyable

    I played HayDay on my iPhone 4 to level 26-29 or so, then it didn't stay loaded when returning to play. Same scenario with iPad at level 26 even when signed in through Game Center.  Why does the game quit within a few seconds after loading?

    Never mind. I've did a hard reboot no matter how hard I pressed the power button. Thank goodness!!!

  • HT201253 I cannot sync my 5S with ITunes.  I can sync my iPad with same cord and computer

    I recently sent my 5S through the washing machine and got a replacement 5S.  I am running Windows 7. I was able to "restore" it from iTunes without any issues other than I hadn't back up in a month.  Now when I try to sync with iTunes it gets to step 5 of 5 and I get a "windows message that iTunes has encountered a problem and needs to shut down".  I can sync my iPad using the same cord, computer, and program with no issues.  I went through Apple support and uninstalled and reinstalled iTunes under their guidance.  I was then transferred to another level of tech support and got cut off.  I have not heard back and have tried to reopen the case without success so I am hoping someone has a way to resolve this issue so I can back up my phone. Thanks

    I had the same problem and this worked...
    http://topsearchforyou.com/2011/09/22/this-ipod-cannot-be-used-because-the-apple -mobile-device-service-is-not-started/

Maybe you are looking for

  • Purchase Order Output Message

    Hello all, in a purchase orderI will send out IDOC's. After creating the purchase order a proposal for an output type had been made (checked in analysis, the condition record has been found, but no proposal had been made in the purchase order. After

  • F110 Payment Proposal - Payment Methods

    Regardless of what payment method(s) you enter in the F110 parameters, the payment proposal still comes back with all open items - this can produce a long proposal list consisting mostly of exceptions (exceptions being open items not having the payme

  • RD across 2 monitors?

    Hi all, I'm using a Dual 1GHz Power Mac G4 with 768MB RAM, a 9800 Pro and two monitors. All the Macs are running 10.4.3 and ARD 2.2. The Client computer is running a single monitor. I was wondering if it's possible to observe/control the Client's wor

  • How i can disable MONITORING temp tables

    In the Oracle 10 g database stats are gathering using Gtaher_stats_job current setting is statictics _level =Typical i need to disable the monotoring for temp tables i try this command it will not change ALTER TABLE "RDC"."INV_TEMP" NOMONITORING How

  • Call SAP transaction out of a Crystal Report

    Hi there, is there a possibility to call a SAP transaction and maybe even pass a parameter (like e.g. project number) out of a Crystal Report? Are there any SSO scenarios? Thanks in advance With kind regards Sebastian