2 Iphone4 play live stream not same

I stream live video from my streaming server and use 2 iphone4 to display.
Unit 1. it play live stream normally.
Unit 2. it play about 20-30 sec, and replay again again and again.
Please advise me, what parameter that i should check or tune ?
Thanks,

I tried streaming with the Adobe Flash Media Live Encoder3 instead of my Broadcater.swf. This connects fine and pushes h.264 no problem.
But the reciever is still seeng VOD not Live video.
Is there something wrong with my receiver?

Similar Messages

Live stream not live- plays like VOD

Hi All,
I'm not sure if this belongs in the AS3 forum or the streaming forum, but here it is.
I wrote a pair CS3/AS3 players to send and receive a live video stream (webcam) from a browser. The first is called broadcaster. It makes a NetConnection to my server, publishes a stream and attaches the camera and microphone. This works fine. The stream is live.
The second is originally called receiver. Using an instance of flash.media.video on the stage it also makes a NetConnectin, attaches a stream and calls play. This also works, BUT the receiver stream is not live. It starts playing at time=0 like a VOD.
--- broadcaster.swf ---
var connection:NetConnection = new NetConnection()
connection.connect(connect_url); // my server/application/instance
var stream = new NetStream(connection);
stream.publish("mass", "live"); // live means stream live without recording on the server
stream.attachCamera(Camera.getCamera());
stream.attachAudio( Microphone.getMicrophone() );
--- receiver.swf---
connection.connect(connect_url);
var stream = new NetStream(connection);
video1.attachNetStream(stream); // video1 is on the stage (flash.media.video not FLVPlayback)
stream.play("mass", -1, -1, true); // -1 means play live stream only, -1 means start at 'wherever the live stream is'
How can the receiver not obey the -1, -1 parameters especially if the broadcaster is not recording on the server. How can i see the beginning of the stream!
I believe I read that the flash plugin 9.0+ uses the on2 codec, and I also saw some discussion about on2 not able to stream live -- or not live from the browser plugin, only the flash media encoder.
Can anybody tell me what is going on?
Thanks
Ted

I tried streaming with the Adobe Flash Media Live Encoder3 instead of my Broadcater.swf. This connects fine and pushes h.264 no problem.
But the reciever is still seeng VOD not Live video.
Is there something wrong with my receiver?

Flash media live encoder, play live streaming failed!

Hi, I install a fms3.5 and fmle3.1 on my computer. In fmle, I set video format is h264,and fms url:RTMP://192.168.8.6/live ,stream: livestream. The input and output windows' video is ok.
The following is fmle log:
Tue Jun 22 2010 12:25:19 : Primary - Connected
Tue Jun 22 2010 12:25:19 : Primary - Network Command: onBWDone
Tue Jun 22 2010 12:25:19 : Primary - Stream[11] Status: Success
Tue Jun 22 2010 12:25:19 : Primary - Network Command: onFCPublish
Tue Jun 22 2010 12:25:19 : Primary - Stream[11] Status: NetStream.Publish.Start
Tue Jun 22 2010 12:25:19 : Session Started
Tue Jun 22 2010 12:25:19 : Video Encoding Started
The following is my source code to play live stream:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
    <mx:Script>
        <![CDATA[
         import mx.controls.Alert;
         private function showFlv():void {
            //myVideo.source = "rtmp://192.168.8.6:1935/vod/test.flv";
            myVideo.source = "rtmp://192.168.8.6:1935/live/livestream";
             Dumper.info(myVideo.source);
         ]]>
    </mx:Script>
    <mx:Panel width="100%" height="100%">
      <mx:VBox width="100%" horizontalAlign="center">
        <mx:Text text="code display"/>
        <mx:Button label="play flv" click="showFlv();"/>
      </mx:VBox>
      <mx:VideoDisplay width="100%" height="100%" id="myVideo"/>
    </mx:Panel>
</mx:Application>
If I use myVideo.source = "rtmp://192.168.8.6:1935/vod/test.flv" ,it can play video. Use :myVideo.source = "rtmp://192.168.8.6:1935/live/livestream", Can't get video. Why?
I just want to play live video on pc.

Who can help me??

Safari will not play live stream

Hi,
I have been wanting to watch the live stream on abc7.com of the wildfires but am unable to.
I have windows media player installed but I just get a blank area were it should be playing,
what do I need?
Thanks

Ecnal, if it is a non-DRM .wmv file, you can download and install Flip4Mac Windows Media Components for QuickTime.

TCS live stream not playing in SnS

Hi , I have configured TCS to stream to the SnS server, I can view the stream in VLC player no problem, but when I create a live event on SnS I get no video stream, not even a video window appears.
many thanks Scott

Hi Scott,
You might want to make sure the SW version of the TCS is compatible with the SW version of the SnS server.
here is the link to verify:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/dms/release/notes/dms53rn.html#wp279002
Paul

How to play live streaming in windows phone 8.1 silverlight app?

Hi,
I am developing a windows phone 8.1 silverlight app. In my I want to show live streaming youtube channel , I think it is not possible,
Actually that youtube channel is a television channel , I want to stream that live tv in my app.(I tried to load youtube channel in webbrowser in iframe tag but it is not opening)
Anybody help me how to play live tv or live streaming in my app,
Thanks..
Suresh.M

Hello,
You will likely need to write a custom
MediaStreamSource that can access the media stream and parse it. Windows Phone supports h.264 natively and as long as the site serves up a media stream that contains h.264 frames you can parse it and have our built in decoder decode and display it. You
will need to have intimate knowledge of the streaming protocol used by the website that you are trying to play. You must also make sure that the website is not using protected content. IANAL so I would recommend that you have your local law professional
(lawyer) review the licensing of the website that you are attempting to connect to and stream from before continuing your development. Your lawyer can make sure make sure their licensing allows you to do this.
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

Nokia E6 live streaming not working

its only one month i've updated my mobibe due to hanging problem and now it s giving me another pain for not playing any live streaming video like online tv or you tube streaming... Also still have the hanging problem.
Help me out if anybody has a solution.

Hi Lance09
Sorry to hear that you are having troubles.
Did you purchase a free trial through the AFL Live Pass Online or did you purchase through IN APP subscription?
Can you please try these troubleshooting steps:
If using your fixed line connection (ADSL, CABLE or NBN), please powercycle your modem and computer: Unplug from power > Leave off for 10 mins > then Plug back in and re start. This will often force a line update through to your modem advising the signal is restored.
Can you then please try clearing your Cache, Cookies and Browser history. To clear these please try the steps below:
From the home screen, tap the Settings button. On the Settings screen, scroll down and tap the Safari button. Under the 'Privacy' section of the Safari screen, tap the button labeled Clear Cookies and Data. On the confirmation screen, tap Clear Cookies and Data.
If still no luck, please try uninstalling and re installing the app from the app store.
Let us know how you go.
Regards -

How to play live streaming video which is being streamed via http or rtsp

I am building an application which needs to display live mpeg2 video; the source of the live stream is over e network, e.g,http://xxx.xxx.xxx.xx:8080.
To see if QT had this capability, In QT for Open URL, I tried, rtsp://xxx.xxx.xxx.xx:8080 and http://xxx.xxx.xxx.xx:8080, but I am not able to see any video. (I tried setting my QT options per posts I have read)
Also, I'm able to see the live stream using Windows Media Player and VLC. (I used VLC to stream the video over the network and I tried streaming several formats but still could not see video in QT; when using rtsp, status of QT says negoiating and never transition from this state)
Any advice on this topic?
Thanks in advance

QuickTime will not play MPEG-2 content, streaming or otherwise, without the addition of the extra-cost MPEG-2 Playback Component. Even with that component, QuickTime cannot play all MPEG-2 streams. Read the FAQ carefully for details.

Audio live streaming not smooth

Hi
I wrote an application, call radio. It play mp3 and publish signal to livepkgr. I don't know sometime audio-live-stream stop, and wait 1~2s it will be continues play. I sure my connection from client to server is perfect.
I read configuring performance features and did it with "combine audio sample", but it not effect.
Here my live streaming:
http://115.84.182.115:8134/hls-live/livepkgr/_definst_/liveevent/iradio.m3u8
or
http://115.84.182.115:8134/hds-live/livepkgr/_definst_/liveevent/iradio.f4m
Can you help me how to fix it ? Sr my poor English

Is the XML a copy/paste? If so you may have a typo in your media url. There
is a space in "liv e". That could be the issue.
hth!

Live streaming not working using REOPS

I made live streaming work using Live Encoder and a flash player I created with FlvPlayback component. It works fine. Now I like to try live streaming using REOPS. I created a config xml file using similar settings in src/assets/data/Playerconfig_LiveStreaming.xml:
isLive = true
<streamtype>live</streamtype>
part of my xml file is like this:
<?xml version="1.0" encoding="UTF-8"?>
<player
    width="640" height="480"
    scaleMode="stretch" isLive="true" autoPlay="true" updateInterval="250"
    hasCaptions="false">
    <mediaElement>
        <mediaElement>
            <id>seeker</id>
            <mimeType>video/x-flv</mimeType>
            <streamType>live</streamType>
            <deliveryType>streaming</deliveryType>
            <media url="rtmp://<myMediaStreamingServerName>:1935/<myapplicationName>/live/livestream" />
        </mediaElement>
    </mediaElement>
</player>
in adobe live encoder, I have setting like this:
URL: rtmp://<myMediaStreamingServerName>:1935/<myapplicationName>/live
stream: livestream
but no matter how hard I tried, it never works for me. I used the same settings for my own player which works fine with live streaming.
Anyone has any ideas on how to make live streaming work with REOPS?
Thanks a lot.

Is the XML a copy/paste? If so you may have a typo in your media url. There
is a space in "liv e". That could be the issue.
hth!

BUG: RTSP cannot play live streams

Sun's RTSP implementation does not handle live streams. Live streams have a range with a starting time but no ending time. Looking at the source code of com.sun.media.content.rtsp.RtspUtil.setDuration(), there's no check for the possibility that the end time is not specified, so live streams will cause a NumberFormatException during RTSP parsing.
Will this be fixed?
Scott

Sun's RTSP implementation does not handle live streams. Live streams have a range with a starting time but no ending time. Looking at the source code of com.sun.media.content.rtsp.RtspUtil.setDuration(), there's no check for the possibility that the end time is not specified, so live streams will cause a NumberFormatException during RTSP parsing.
Will this be fixed?
Scott

ITunes Festival live streaming not working

Every time I go to the iTunes Festival page in the iTunes Store I keep getting the message of:
"This computer does not support iTunes Festival live streaming."
Why not? Does it only work with apple computers (not windows)? I wanna watch Paul Simon!! =D
-Michael

Lucky for you skalarocks. It's 16th and I still cannot access any of the previosu concerts on iTunes!
I contacted customer support who advised
"I have done some research for you and found that there is a delay in the on demand streaming. "
And then directed me here. I think I am leaning towards an earlier comment about Apple Techs not having a clue.
I suppose they are giving it away so there is no profit in it they wont want to support a fix. Not goign to that much trouble after all skalarocks

Play live streams on FMS3

There is a problem when I just try to develop with FMS3.I
find that the stream is not so fluency when use default settings.If
I code "cam.setQuality(0,100)",the problem disapeared.After that,I
try to code "ns.publish(***,"record")".Then I play the stream "***"
,It's fluency.I don't know why and how to fix the problem.

by "fluency " do you mean the "jerks" in video while playing
back them on a flash client?.
If it is so, then one way to solve this is to increase the
default buffer length (0.1 sec)in the "subscriber" flash client to
1 sec or more.

ITunes Festival 2012 Live stream not working

Has anyone found a way to watch the itunes festival 2012 live from their PC?

I'm having the same issues. I've tried to get some tech support but can't because the iTunes Store Support don't work weekends. I've had sent 3 emails before I got anything back from Apple/iTunes. I sent out 3 emails this morning; 1st email stated after much frustration I was able to catch the latter 2/3 of Jack White's concert; 2nd email stated that I'm having issues trying to watch the recorded concert of Band of Horses and it will not play; 3rd email was a video of the 30 seconds of the Band of Horses concert that I was able to watch. I'm not holding my breath that Apple will do anything to work out the bugs in their iTunes program so its customers could enjoy the festival.
One Unhappy iTunes Camper
grrrrrrrrrrrr!!!!!!!!!!!!!!!!!!!!!!

6680-Voda live streaming-Not enough Bandwidth

Got a Nokia 6680 yesterday and could get the streaming Sky on Voda live no problem. I have tried today, it is saying not enough bandwidth and to check my network settings.
Not sure what to do at this point.
Any help would be appreciated please.

This is probably because you are not in a 3G reception area. The connection will be via GPRS and therefore not sufficient for video streaming (in most cases).
You can generally tell by look at the service indicator what sort of area you are in.
All About Symbian - News, reviews and software for S60 phones.

2 Iphone4 play live stream not same

Similar Messages

Maybe you are looking for