2 iSight Camera One Computer

I am using an iSight camera as a webcam connected to a G4 Cube. To increase the field of view I want to add another iSight. Anyone ever run 2 iSight cameras on one computer? Any problems

You can connect two cameras to your Mac at the same time, however, iChat and the other apps that I have checked from those listed in Some Applications You Can Use With iSight will not operate both cameras simultaneously. You can only switch between the two video sources.
You apparently want to show the views of two video sources simultaneously. You will need to find software that will do that or find a hardware video mixer device such as FOCUS Enhancements' MX-4 DV™ Professional Digital Video Mixer that can deliver the features you want.
A lower-cost alternative that may work for you would be a wide-angle accessory lens to expand your iSights field of view. One way to do this is explained in the paragraph titled "Accessories Are a Geek's Best Friend from this MacWorld article.
Another accessory lens approach uses Kaidan's Accessory Kit for Apple iSight. The included 37mm threaded lens adapter will allow you to add a threaded wide-angle accessory lens without the tape and rubber bands of the MacWorld article's suggestion.

Similar Messages

  • 3 isight cameras on a network.  Only one works

    I'm at a church and three of us have isight cameras. We can talk to each other, but my computer is the only one that can use isight to connect to people outside of our church building. The other cameras won't do video or audio chats with people outside the building. Any ideas? I checked the firewall settings in system preferences and they're exactly the same. I'm not sure where to start.

    Hello Scott,
    ... two users that are having the problem only use their isight cameras with ichat av. ... when he connects the camera, it freezes ichat. any ideas on that?I have never seen an instance where connecting a camera causes iChat to freeze. That user needs to do the same iSight tests you have done and check out the other the iSight Tips and FAQ.
    Suggestions to help new iChat users get started can be found at Using iSight with iChat AV.
    All iChat AV 3 users should upgrade to 10.4.2. 10.4.2 upgrades iChat to iChat AV 3.0.1, which significantly reduces iChat problems for many users. If you are still having problems, there are other tips in Help for iChat AV 3 Problems.
    <hr> ... switch the router that the main internet line flows through for the church and school.If you have multiple subnets or LANs in your "church and school" you may have induced problems that way. You can easily check whether this is the source of your problems by moving one of the Macs that currently does NOT work to the LAN connection you are using that DOES work. If that fixes your issue with the problem Mac, the problem is in your configuration or connections.

  • Isight doesn't work with one computer

    the whole family got isight cameras for christmas. as long as we're all in the house we can see each other on our cameras, but when i take my laptop out of the house to another location, i can see my stepdad's computer, but not my mom's.
    i've checked with the cable modem people- no firewalls there. i've called apple- no ideas from them.
    firewalls are OFF on all three computers, preferences for ichat AV are all the same on all three computers.
    i can see video with pc's and other macs, including the apple test ids (appleu3test01, appleu3test02).
    pc's can't see my computer, the only mac that can't see me on my computer is my mom's.
    any ideas?
    my computer: powerbook g4; os10.4.3
    mom's computer: powerbook g4; os 10.4.3
    stepdad's computer: desktop g5; os 10.4.3
    thanks for any help you may have to offer...

      Hello Anita. You have a good start and are doing the right things.
    Here is how I recommend you continue your trouble shooting to find the SOURCE of your problem(s?) so you know what to fix. Otherwise EVERYONE will need to try EVERYTHING.
    I suggest that you disconnect everything except one ethernet connected Mac from your home internet connection as suggested in Using iSight with iChat AV. Begin testing with other Mac users (you can use these if you need additional Buddy Names for iChat Test) to find ONE of your available Macs that can connect for reliable video from ONE of your available internet connections. Then, try the next Mac from that known good connection.
    If none of your Macs work when connected directly to your Broadband modem via ethernet cable, first Check your Broadband Speed to be certain you have enough bandwidth.
    You should also consider Possible hardware or software conflicts.
    Then, if bandwidth or conflicts are not your problem, try any applicable suggestions from Help for iChat AV 3 Problems until you get ONE Mac working. This will establish a known good internet connection.
    Concentrate on ONE Mac until it is working with other Mac testers. Then fix the next Mac.
    Finally, you can begin adding back other items (if any) such as a router, wireless, etc., to your know good modem to find any problems associated with your connection devices.
    If you need to post back, let us know whether your successful video connection inside your house was via Bonjour or via the AIM server.

  • MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

    MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Copy lightroom 4.4 "default camera settings" from one computer to another?

    Is it possible to copy my lightroom 4.4 "default camera settings" from one computer to another?

    Quote "Are you saying that the settings are stored in the catalog."
    I believe it is stored in the Preferences file. You can use presets to do the same thing as adjusting the "default develop settings", they are applied differently.
    One is set in the Lightroom "Preferences" and one is applied by selecting a particular preset at import. I have not tried but since you can delete the preference file and Lightroom will rebuild one I am pretty sure you should be able to copy one from one computer to another.
    Also you need to be aware that Lightroom applies noise reduction by default to your specific camera model and to the ISO setting. It does not display the actual settings.

  • Is it possible to connect 2 Creative Web Cameras to one computer?

    Hi all.
    I want to connect 2 Web cameras to one computer and see li've video in two windows simultaneously. I have bought 2 identical LabTec Web Cameras, and when I connect to both cameras simultaneously the both video streams freezes.
    Does anybody have any experience connecting 2 identical Creative Web cameras to one computer? Can they stream simultaneously without freezing?
    I am planning to buy 2 Creative WebCam NX Pro, can they stream simultaneously without freezing?
    Im using Windows XP SP2 and USB 2.0.
    Regards,
    Hemmingsen

    Thank you for your reply!
    I have tried to connect to different Web cameras to the same PC - and that worked!
    I have tried to connect to identical LabTec Web cameras to the same PC - and that did NOT work!
    It looks like it could be a driver problem.
    I am working on a litte robot project and in connection to that, I need two identical cameras simultaneously to take 2 pictures. I that way I can analyse the 2 pictures and calculate the distance to objects. But the two pictures MUST be as identical as possible - therefore I want to use 2 identical cameras.
    I would like if anybody who has 2 identical Creative Web cameras could do this little test:
    1) Connect 2 identical Creative Web cameras to 2 different USB controllers (WebCam NX Pro preferred)
    2) Open "My computer"/"WebCam "
    3) Open "My computer"/"WebCam 2"
    4) Check that both windows shows li've video simultaneously
    5) Reply the result and the camera model to me
    I get bankrupt if I buy more cameras that I cannot use - so I hope anybody can help me.
    Regards,
    Hemmingsen
    Message Edited by hemmingsen on 09-27-2005 05:31 PM

  • Computer cannot see iSight camera

    My iSight camera has suddenly stopped communicating with my computer. There is nothing wrong with the camera itself as I have tested that on my iBook and it works fine through the same internet connection.
    When attached to my Power Mac however, there are no symbols in iChat. I can chat via written text but that is all. When I go to the iChat preferences box it tells me that there is no camera connected.
    I have tried switching firewire cable ports but no no affect. This is obviousely a software problem but I do not know where to start to fix it.
    Can anyone point me in the right direction?
    Power Mac G4 550   Mac OS X (10.3.9)  

     Sometimes the fix is as simple as restarting your Mac with the iSight connected. Repairing your Mac's disk permissions might also correct the problem. If not, try the following in any order that makes sense for your system.
    You have tried some of the tests suggested in How to test your iSight to ensure it is functional. Try the others you think might help you track down the problem causing your symptom. If your Mac's System Profiler does not recognize your iSight as a Firewire Hardware item, pay particular attention to the Firewire related suggestions.
    If your ONLY iSight problem is when using iChat AV, you can quit iChat AV and then delete the com.apple.ichat.plist file (iChat Preferences) from your Users / (your home account) / Library / Preferences folder. Restart iChat afterwards to rebuild the .plist. After the restart, you will need to reset your iChat preferences to reflect your choices. Then check to see if iChat recognizes your iSight.
    You may find useful corrective action suggestions in Using iSight with iChat AV or How to get iChat AV working again. If you can remember when the problem started, you can eliminate trying all the trouble shooting possibilities that are not relevant.
    Applying the 10.3.9 Combo Updater as suggested in How I Update My Mac OS X may resolve your problem. The only way to know whether the Combo Updater will help is to try it. Applying it cannot harm anything.
    Let us know what gets it working for you.
    Jim

  • I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight  camera pictures look fine.

    I 've had the newest iPad for about one week. Just started using face time..why does face time camera take pixelated pictures? The iSight  camera pictures look fine.

    Kathleenfromks wrote: ...why does face time camera take pixelated pictures? ...
    Because something is wrong.
    You will need to troubleshoot to find out what needs to be fixed.
    One of these suggestions may resolve your trouble. 
    FaceTime (and other video) quality problems can be caused by problems at either end of the connection.  Unless your video callers' FaceTime connections work properly with everyone else but you, both parities to the video call should consider these possibilities.
    (1) Restart your iPad and test again. Sometimes a simple restart fixes things. 
    (2) Use a fast broadband internet connection for best possible FaceTime video.
    Broadband speed matters at BOTH ends, so you use something like http://speedtest.net/ to test both ends of your video connections.
    Speeds less than 300 Kbps (up and down) at both ends are unlikely to give best results.
    (3) Try from a different wi-fi connection.
    If the problem is ONLY at your current location, restarting your internet connection may help.  Shut down your iPad or turn Airplane Mode "on".  Then check your cable connections, restart your modem and wireless access point, reconnect iPad to the wi-fi, and test again.
    If the problem remains but ONLY at your current location, there may be a problem with your internet service.  Contact your ISP for help.
    (4) Always use as much light as possible for best images (including video) from your iPad. 
    Message was edited by: EZ Jim
    iPad2 iOS 5.1    

  • Two brand new Isight cameras won't work with my computer!@!!= ARGH!!!!!!!!!

    The first Isight I bought had some stuck pixels and was returned to apple for a new Isight. The new camera worked for a couple of days then screwed up the video with ichat and skype. Worked OK with Quicktime, Imovie, Quicktime Broadcast although it locked up like the first camera did when recording on native resolution in QT.
    I hope my experience hasn't been typical of the Isight camera.
    Why would it work with quicktime/imovie/quicktime broadcast but refuse to provide decent video to ichat or skype even after formatting and reinstalling everything. Why then would it work ok on a macbook with no problems but not work on an Ibook? Why would a firewire camcorder have no problems using any of the programs but then run into problems using an Isight camera?
    ibook g4 12   Mac OS X (10.3.8)  

    10.6 Snow Leopard will run on any Intel mac. So that's any Mac made in the last 6 years. Snow Leopard came out in July 2009 and only cost $29. So you had over 3 years to have upgraded your MacBook.
    You're willing to pay a couple of hundred dollars for a new phone but not the $29 in the last three years to have upgraded your OS on your MacBook.
    The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

  • ISight camera "in use by another application"

    Hello. I'm having trouble using my built-in iSight camera in my brand new MacBook Pro. I can get the thing to work while using iMovie 08, but it won't work with Photo Booth, iChat, or iMovie HD. The very first day I had the computer, it worked with Photo Booth, so I'm fairly certain it's a software problem. I've loaded a ton of software.
    The error message I get for iChat and Photo Booth is "Photo Booth cannot open because no camera is attached or the camera is in use by another application." It isn't. I swear.
    After reading through a bunch of posts, here's what I've tried:
    1. Reinstalling QuickTime
    2. Updating the OS
    3. Rebooting
    4. Repairing permissions
    5. Deleting the Photo Booth preferences
    6. Zapping the PRAM
    7. Resetting the CMU
    8. Logging in through a brand-new user account
    9. Checking to make sure the camera shows up under the About This Mac/More Info section
    10. Trashing everything I can find related to the HP Scanner software (though I'll need that again in the future)
    11. Getting rid of other devices listed under the Image Capture folder in my Library
    12. Re-installing Photo Booth
    13. Calling Apple Support. They gave up and told me to "archive and reinstall," but after spending several weeks installing software, I don't want to do that. Archiving and reinstalling is a pain in the butt. They also offered to "escalate" the issue, but after 1.5 hours on the phone, I decided to try back another day.
    In the meantime, I wanted to see if anyone else had some advice.
    It feels like the old days of OS 9 extensions conflicts. But I'm just not sure how to problem solve these things. Like, for example, if it IS a problem with HP scanner software, how do I get rid of all of it? Might it be a problem with having both iMovie HD and iMovie 08 on the same computer...? How can I systematically problem-solve this thing?

    Welcome to Apple Discussions, schmargle
    I think you are on the right track. The fact that you have "loaded a ton of software" makes me think possible conflicts.
    For your HP issue, parkersal's solution at http://discussions.apple.com/message.jspa?messageID=4246676#4246676 might help you. In addition to some more details about parkersal's tip, you can find some other users' suggestions in Shelia Addison's sightless iSight ... thread.
    If HP is not your only problem, your quickest fix may to be an Erase (your entire startup disk) and Install (of the OS.) Update to the latest version, and test your iSight before you install anything else to be sure it works. Then install the additional software you need one-by-one, testing iSight between each one to make certain you know which one is breaking it.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Kisight: How do I get my iSight working ?  Trouble Shooting an iSight Camera.  (Version 3)

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

    Replacement for the second draft of this Thread   (To be removed if Published as Tip)
    kisight: How do I get my iSight working ?
    Trouble Shooting an iSight Camera.  (Version 3)
    Hi,     On many subjects Apple has Articles and Documents that can help.
    In some case they are written by an Engineer or similar and can miss the mark for the average user.
    In other cases they are crafted, detailed responses to an issue that has popped up many times in the Apple Discussions and take the best from many responses in those User-to-User Discussions, creating something that can not be surpassed.
    This is the case of the Apple Article HT2090 on Trouble Shooting an iSight.
    It lists steps and processes to go through for both Internal iSights and External ones.
    However as with most things it does sometime pay to reword things differently so that people grasp the points in language they understand.
    The info here is a reworking itself of two pages at ralphjohns.co.uk/EZ Jim pages namely EZ JIm's page 2 Where can I Find Help With My iSight ? and his page 4, How Can I Test My iSight is Completely Functional ?  which were written several years ago and predate the Apple Article, being aimed at the External iSight.  They have been updated since to address the Internal iSight as well but some of the comments are useful between the two types.
    External First.  For Internal iSights Start at 2b)  (you will need to adjust some options/steps as the Internal is USB)
    Steps
    1) Pre Purchase
    If buying an External iSight you should if you an get to see it in action.Apple no longer sells the External iSight so you will be buying it second hand.If you cannot get to see the device plugged in and working on  Mac then check the smaller print of the seller and selling site as to nature of Returns and Faulty Goods.
    2) Does it work ?
    a) First of all Plug it in.  It should come with a suitable mount (although there are variants on this) and a 6 pin to 6 pin Firewire cable.
    Ideally it should have it's own Firewire port/socket on your computer. Connecting it "DaisyChained" to other devices can be a problem as they do not all use Firewire at the same Data speed.
    It will then go through some checks as the OS powers it up and checks it's firmware.
    Do not be concerned that the little green indicator light atop your iSight illuminates for a few seconds and then goes dark when you first connect your iSight or power on your Mac. Do not be concerned if you hear a soft whir as iSight attempt to focus either. Both these occurrences are normal. If your iSight passes the following tests, do not worry about this sound or the status of the green light.
    There is no ON switch as such.  It does have an iris mechanism that can be controlled by the User.  The iris should be turned so you can see the Lens for the iSight to send pictures to an application.
    b) Pick an Application to see the picture the iSight produces.iChat is one application you can use. Photobooth is another. iMovie (Version 4 or above for external iSight -- Version 6 or above for in-built iSight) and Comic Book (if bundled on your Mac) are yet more.
    See this Users Tip for more applications Or this page for yet more.
    Photo Booth is probably the simplest as it has no Preferences to choose a camera in the original version and is done from the Menu items in later versions  (nor is there any setting in the OS) and Photo Booth will default to the External Camera if one is plugged in before the application is started.     If you see your self or what the camera is pointing at, It Works !!
    3) If it does Not Work
    a) Check Cables/leads.  Re-seat the cable at both ends. DO this carefully as although Firewire cables are keyed to fit the right way it has been known to force them the wrong way.
    Try another 6 pin to 6 pin firewire cable.
    b) Unplug the cable from any other FireWire device and give the iSight it's Own FireWire port/socket on the Mac (exclude issues with other FireWire devices). It is important that this be a port/socket on your computer and that you know that it works. Do not use a port in a FireWire hub or another FireWire device or a FireWire port in an Apple Display for testing.  (Also see d below if you have an 800 FIreWIre Computer)
    c) Check System Profiler (Apple Icon menu top Left > About this Mac. > More Info Button)Open the Reveal Triangles to see the list and go to Hardware > FireWire.  (Use USB for Internal Cameras)
    If it appears here try booting or Logging in as another user on the Mac (Create a Test account if you don't have one) and try item 2b) above again.
    d) With FireWire 800 computers you may have to change your FireWire 400 to 800 Adaptor or Cable to get full Audio functionality with Lion Apps
    If it is not in the System Profiler you are almost certainly going to need the Trouble Shooting Article from Apple at this point.  This Article may also be of help (number HT1317 What to do if your computer won't recognise a FireWire or USB device).
    If you have not resolved things at this stage it is going to be time for an Engineer with Apple credentials.There are no user serviceable parts inside any iSight.
    Other Items
    Audio.
    The External Camera has two mics inside.The volume it records at or plays through for iChat is controlled in System Preferences > Sound > Input tab (select device) and this should be set to get the blue response bar to at least half way (preferably three quarters) when you talk.The same applies to any other Mic, even the Internal one on laptops and some other Macs.
    Firmware.
    The System Profiler as detailed above should tell you the Firmware the iSight has.  The current version is 1.0.3 and was updated in Panther.  (Essentially it is an Audio compatibility update but does seem to help in other situations)
    If your computer is running Panther (10.2.x) then use this Updater
    If running Tiger (10.4.x) or Leopard (10.5.x) then navigate manually to your Hard Drive/System/Library/Core Services/iSight Updater and run the updater found there.
    If an iSight is Plugged in on the Computer when you do an  OS update and the firmware needs updating on the iSight this app is supposed to be triggered but it seem it may need a hand at times.
    Focusing on the External iSight
    Essentially the External iSight is self or Autofocusing.
    If in doubt then try better lighting and strong colours as opposes to light or pastels.
    (All built-in iSights are fixed focus. Therefore, unless a built-in iSight lens cover is dirty or smudged, any built-in iSight whose image is blurry needs service by an Engineer with Apple credentials.)
    EZ Jim has these more specific recommendations for piece of mind.
      Make a cross whose lines are about one-half inch or more wide on a plain background to use as a focus target. (I have even used black electrical tape.)
    Turn on plenty of light and hold the target very still at about two or three feet from the lens. Watch iSight focus. (You may need to use a tripod or brace yourself to hold the target still enough.)
    Then quickly move the target and hold it very still at about one foot away from the lens. Watch iSight focus.
      Finally, move in to about six inches from iSight, and check focus there, too. (Holding the target still is more important as you get closer to iSight.)
    This Users Tip by Ian Bickerstaff  can give you clues for any application really  "Look  and sound good in iChat"
    Other Info and Links
    iSight Support info at Apple Links to Users Guide, Manual and many other topics on the External iSight.
    Apple's iSight Firewire Connectivity FAQs
    Apple's iSight Service FAQs
    If you feel you have not understood or think you have not grasped something here or in the links so far try the iSight Discussion Forum
    1:13 PM      Saturday; October 8, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

    How can I use the built-in Isight camera and an external video camera at the same time?
    I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
    Thanks

    Simple question with a not so simple answer.
    (a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations.  Digital video is processor intensive.  The only way to know if your Mac can do this it to try it.  If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus.  You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
    (b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
    How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
    This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
    Other iMovie versions work slightly differently.
    iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    iMovie 8 (from iLife '09) is slightly different as explained in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
    Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
    (If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
    (4) For FaceTime, launch the app and click the Video menu item.
    If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    (5) I do not use Skype oir Oovoo.  For those or other apps, see Help for each app for info on how to select your desired camera.
    Message was edited by: EZ Jim

  • Is there a way to turn off and On the isight camera or app to do it ?????

    Hi
    Does anyone know either of a Simple way to Turn off the isight camera on a Macbook pro (3.1 model with Snow leopard) or a simple program or Widget to do this ??
    I have already Googled this but cannot find much - except disable certain files, or a Applescript by Techslaves.org called isight disabler , which seems great except I have to run applescript each time run this script, put in password, then select !
    SO is there a Basic app or even a Way of making the isight disabler work like a simple app - or a way to do with Mac's settings ??
    Any help is Appriciated
    Thanks Mark

    Globalmark wrote:
    Hi
    Does anyone know either of a Simple way to Turn off the isight camera on a Macbook pro (3.1 model with Snow leopard) or a simple program or Widget to do this ??
    I have already Googled this but cannot find much - except disable certain files, or a Applescript by Techslaves.org called isight disabler , which seems great except I have to run applescript each time run this script, put in password, then select !
    SO is there a Basic app or even a Way of making the isight disabler work like a simple app - or a way to do with Mac's settings ??
    Any help is Appriciated
    Thanks Mark
    Barring some unusual circumstance, there should be no need to disable your built-in iSight because YOU decide when to use your iSight.
    Some apps such as iChat allow you to enable and disable the webcam from menu commands.
    Other apps such as Photo Booth only use the camera when you click the button.
    However, if you REALLY want to disable, scripts like this one can easily disable and enable iSight.
      http://techslaves.org/index.php?page=62
    However, be aware that it simultaneously disables ALL USB webcams when active.
    Although I do not recommend it, you can manually disable your built-in iSight by removing the "QuickTimeUSBVDCDIgitizer.component" file from your computer's HardDriveName > System > Library > QuickTime folder and restarting your Mac. Your built-in iSight should no longer work with any app.
    P.S. Manually moving, renaming, or deleting files outside your Username/Documents folder
       is generally a BAD idea unless you KNOW how it will effect OS X.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • Built in iSight camera no longer showing up or recognized by iMac

    Hello there - I have a white 1.83 GHz Intel Core 2 Duo iMac with a built in iSight camera, and the camera is no longer showing up, or is not recognized by the computer any longer. Very strange! The little green LED by the camera is not lit any longer, and the camera is not recognized any longer by Photo Booth, iChat AV, or any of the other apps that would use the camera. This is a real pain, because I am leaving for France in a couple days and am taking my MacBook Pro with me, and am hoping that I can use iChat AV to talk to my kids at home on the iMac. I do have an extra iSight camera that I have hooked up to the iMac and can use in a pinch, but I really want to use the built in camera on the iMac. Any hints / ideas / suggestions on what to do for this problem would be greatly appreciated. Thanks!

    No, unfortunately that did not help. I did the following...
    1. See if the issue is application-specific. - Nope. Camera is not recognized in any of the apps that it should be recognized in, I tested iChat AV, PhotoBooth, ImageCapture, and iMovie.
    2. See if the issue is user-specific. - There's only one user account on this Mac, so I couldn't do that.
    3. Find out if the computer recognizes the iSight. I went into System Profiler and checked the USB profiler, and the camera does not show up.
    4. Reset SMC or PMU. These just looked like different ways of restarting, which I did multiple times.
    I have also run my Software Updates (on OS 10.5, which I did with a clean install from an OS 10.5 DVD by the way) and still no camera. This problem started happening with the original OS 10.4 (which it came with) and I was hoping a clean install of the OS would help, but no.
    I'm wondering if resetting the PRAM might help, but I can't remember those keys you hold down while restarting (was it Apple-Option-P-R ?) or if that is just reaching waaaaay back to the pre OSX days.
    Here's the kicker though - if I plug in a FireWire iSight camera, all is well. I'm really hoping that the camera isn't jsut dead, but it's starting to look that way. Would Disk First Aid or maybe DiskWarrior help?

  • Mid 2009 13" MBP iSight camera bad picture quality in photo booth

    My daughter's stock mid 2009 13" MBP 2.26 ghz intel core two duo has a problem with the isight camera. The isight camera is built in to the screen. The isight camera works some of the time flawlessly and other times it comes out real grainy and with small colored pixels all over the screen like colored static (about 20% to 30% of the photo booth screen is affected but the rest of the screen outside of the photo booth app is unaffected). She only uses it in photo booth but we've tried the iChat app and the same thing happens there too, once she couldn't get the MBP to connect to the isight camera (it just showed a black photo booth screen), so she closed the lid of her MBP and reopened it and it worked. All of the software and firmware is up to date and we've tried resetting the PRAM and the SMC, it didn't do anything to fix the problem. It seems like there's a wire loose in the computer from the screen to the computer base, only because I can move the screen back and forth and the picture quality changes, the amount of static on the picture will move, go away or get worse. I had the screen changed in early 2010 (January or February) (the MBP was about 5 or 6 months old then) at the apple store under warranty due to dirt under the screen's glass (manufacturing defect). The photo booth picture static problem comes and goes, but here lately it comes more than it goes. The screen in general is in good shape and doesn't have any detectable problems with it, it has a good picture and no dead pixels, the problem seems to be only isolated to the isight camera. Can some one help with this problem? How long of a warranty is given on the warranty repairs (like the screen change they did in early 2010)? If apple does a repair on it and finds a wire that has rubbed the insulation off of it on a hinge causing a short and the isight problem, as a result of a sloppy repair from the first warranty repair, will they cover it under warranty again even if it's been over a year since they changed the screen? Also how honest will apple be if they do find out it is a problem caused from the first screen replacement, will they own up to their mistake? If I don't agree with apple's repair decision, can I get a second opinion from an outside source, third party, and if it's diagnosis different than apple's and can be proven, can I still get apple to do and pay for the repairs and labor if it turns out to be their fault from the first warranty screen replacement?
    The reason why I'm asking is, I took my wife's white macbook in about a year ago for the famous cracked top cover replacement (under warranty) and when I got the computer back, the isight camera didn't work, so I gave it back, they took it apart a look at it and said there was nothing wrong with it and gave it back, then the screen wouldn't come on so after 4 hours at the Apple store they decided to send it to Austin, TX. for repairs (I'm in Ft. Worth TX.). Apple in Austin said it needed a new main board. They said the old one had water damage to it. We never had water anywhere near the computer, not even in the same room. It was working fine when we took it in, we took it in just to get the plastic top case, that cracks all of the time, replaced under warranty. And then they wanted us to pay for an $800 main board because some how while they were doing the top cover replacement it got water damaged. I argued with them and they finally gave me a one-time offer of them paying for half of the repair and labor or if I disagreed or left the store I would have to pay the whole amount if I chose to have the repairs done. So I ended up having to pay $467 for a year old macbook main board that was water damaged in their possession during their repairs. I like Apple and their products but I am worried about giving my daughter's MBP over to them for repairs because of this incident, it's an honesty issue with how honest they will be with what they find because they won't give back the old parts for analysis by a third party to verify their diagnosis.
    Thanks for any info and advice anyone can give.

    Hi,
    As a personal note I find long posts like this hard to read if they are not broken up in to paragraphs.
    As I say it is  a personal thing.
    I can give you some information about the camera and laptops over the past few years.
    Basically in early Laptops of the MacBook Pro and MacBook range the cable did tend to fray at the point where it passed through the hinge.  It did take a well used laptop that had the lid open and closed frequently to cause this.  (your 2009 model might just be in that group - I have no firm dates or models I am afraid)
    Later models have this rerouted so that this does not happen.
    However the cable has then tended to get pulled from the camera end and become loose.
    This On Line Self fix site has pages about some models  (The one I have linked to may not be yours)
    I have linked in to later pictures in the sequence but there are navigation points to work back to the start.
    Note:- they use pretty specifc specialest tools as well in these pics.
    Doing this would certail Void any Warranty you have left.
    From Posts mainly in the iChat and the iSight areas I have gathered that it seems common for Apple to replace the Screen as a whole rather than fiddle with getting solely at the camera.
    Apple has this article on Trouble Shooting an iSight
    Basically it says try several apps then try logging in on another Mac User account to see if it is App based or User based or in fact System wide.
    If System wide then resetting the SMC/PMU is the only suggested fix.  (Which I did read you had done)
    In addition to that I would add that testing should be done in different lighting conditions.
    Lighting in the evening or dark that is good enough to read buy is not always good enough for the camera or is not illuminating the right areas.
    Some people have reported that Starting the computer in Safe Mode (then Rebooting afterwards) seems to help.  (it clears out some caches and starts up with reduced extensions)
    As to actual Repairs and any Warranty that may still be in place I cannot say.
    I can say that when people post about problems with repairs a certain stores someone else will tend to post that their experience was different.
    You seem to report two different experiences with the two computers yourself.
    10:24 PM      Thursday; July 14, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • Error while invoking the commit operation in a data control

    JDeveloper 11.1.2 When we invoke the commit operation exposed thru the data control, sometimes we get the following error: Caused by: java.lang.NullPointerException at oracle.jbo.server.DBTransactionImpl.addPendingEvent(DBTransactionImpl.java:5751) a

  • ABAP CLASSICAL REPORT

    Hi to all,              Can u please send me your analyzation about the report given below why because i cant understand it.  Please send me your analyzation and how to develop this report. Service Request Title:     Custom SAP Report for MS Get Well

  • SQL Script in XE Cancels during Execution without returning any error(s)

    Hi all; I'm running a SQL script with a drop table and create table statement along with several hundred insert statements to load data into this table in a Oracle 10g XE database. There's a total of 213 SQL command lines in the script. (1 Drop Tbl/1

  • Adobe Connect Pro

    Hi I installed the trial version of Adobe Connect Pro and got the link to my e-mail. When I click on it, my Internet Explorer tells me, that it is not able to connect to this webpage. Do u have any idea what the problem could be? Thanks for your help

  • XML Web Service application

    Hi all I have to design and develop a web service. Where the client sends automaticaly XML files to b analized. (They get sent whenever a special event happens) the server recibes it, verify it agaist a DB and the return XML files with an extra STATU