2 JDK intsallations on a machine. Can I have 2 JAVA_HOME ?

Hi All,
I have a Web server called "SAP NetWeaver Web AS" unstalled on my machine .. It points to JDK1.4 which is also installed on my machine. It looks up JAVA_HOME which points to my JDK 1.4 installatrion..
Now, I just installed Tomcat 5.5 and J2SE SDK 5 and although Tomcat 5.5 can work with JDK 1,4. I want my Tomcat 5.5 to explicity point to my SDK 5. I cant have 2 Java-Home variable right ? How do I make the Tomcat server point to my sdk 5
Thanks and Regards,
Prem
Edited by: PremM on Jun 9, 2009 11:22 PM

Arizona mortgage rates can vary between lenders and often can change multiple times each day. Typically, Arizona mortgage rates for people with excellent credit are going to be very close to what the national averages are for mortgage quotes.
This is why we post here the national averages of what consumers are being quoted (in real time) so you can see what you can reasonably expect when shopping for a mortgage anywhere in Arizona.
[Arizona Mortgage Rates|http://www.arizonamortgageteam.com/arizona-mortgage-rates/]
Edited by: vera99 on Jun 10, 2009 2:43 AM

Similar Messages

  • Time Machine can no longer write to drive

    I have been using Time Machine to back up my iMac G5 for over a year. About two weeks ago the computer started acting really strange so I actually restored the entire system from my Time Machine backup. Everything was working great until today. The external hard drive that I've been using all this time is suddenly "read only". How do I change it back to "read/write" so Time Machine can access the hard drive properly?

    BobMeister wrote:
    I have been using Time Machine to back up my iMac G5 for over a year. About two weeks ago the computer started acting really strange so I actually restored the entire system from my Time Machine backup. Everything was working great until today. The external hard drive that I've been using all this time is suddenly "read only".
    It's very important to know exactly what you or the computer was doing just before this happened. Usually, things do not happen on their own.
    How do I change it back to "read/write" so Time Machine can access the hard drive properly?
    Changing it back when it's not clear why it changed in the first place is not always a good thing to do for several obvious reasons.
    Right-click on the TM drive icon and select "Get Info"
    Under Sharing & Permissions, you should see:
    Your name (Me) Read & Write
    (unknown) Read & Write
    everyone Read only
    Post back what you see and we can attempt to proceed.

  • I have reinstalled snow leopard 10.6.8 and want to restore my i photos from time machine. can not find iphoto libary in time machine, can"t not find home-pict. iphoto lib.  in time machine

    i have reinstalled snow leopard 10.6.8,  and want to restore my i photos from time machine. Can not find i-photo libary in time machine, can't not find > home-pict. iphoto lib.  in time machine. Please help.

    On my HD it does not say ,restore, in yourname -pict. Iphoto lib.,
    On the time machine, it , yourname etc, oes not show up at all.
    Only right side of TM, your name etc. does not show.

  • External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

    Hi
    How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
    Is there a DVI adaptor already for Thunderbolt?
    Thanks,
    JFR

    The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

  • Windows machines can't join domain after 10.5.4 upgrade

    Howdy folks,
    I have a ticket open with Apple on this but am posting here in hopes that someone might have an idea for me.
    I upgraded our Mac OS X Server 10.5.3 to 10.5.4 on Sunday, and this morning several users reported that their PCs running Windows XP SP2 were unable to login to the Windows domain hosted on this machine. It's the primary domain controller for the Windows users.
    One thing to note is that I had to reinstall the server completely because the 10.5.4 patcher crashed, creating all kinds of mayhem. I did a fresh install of OS X Server 10.5 and immediately applied the 10.5.4 combo updater to it. I had to restore the Open Directory from an archival copy, and the SMB was created fresh. Not sure why but the SMB services weren't preserved by the Server settings export command in Server Admin.
    I thought unbinding the PC from the Windows domain and then rebinding it with a new name would help, but I've been completely unable to add older computers to the domain, even after removing the old computer records first.
    I've got a reproducible failure mode for this problem on a Windows XP virtual machine running on VMware Fusion on my Mac. Here's the method I've been using to create the failure:
    1. Change Windows XP System name to something new that doesn't already have a computer record on the Mac OS X Server and reboot.
    2. After the reboot, run "NewSID" program on Windows to globally change my Windows machine's SID to a new, random value, and reboot again.
    3. Attempt to use the Network ID wizard in the Windows Control Panel to re-add the machine to the domain under a new name so there's no conflict with any old computer records floating around in Open Directory. After it prompts me to enter the username, password and domain name for a user who's authorized to add machines to the domain, I get a dialog box that displays this error:
    "Your computer could not be joined to the domain because the following error has occurred:
    An internal error occurred."
    Not too informative.
    Here are the error messages I see in /var/log/samba/log.smbd (searching for the new computer name in the search field):
    netbios connect: name1=BIGMAC name2=JEFFVM6
    netbios connect: local=bigmac remote=jeffvm6, name type = 0
    opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'JEFFVM6$'
    odssam_getgrnam gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Groups record for 'JEFFVM6$'!
    opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'JEFFVM6$'
    kDSStdAuthNewUser was successful for account "jeffvm6$"
    At that point it's impossible to join the computer to the domain no matter what. The most puzzling thing is that SOME of our users were able to login without any problems whatever. The ones that were either physically off or somewhere else when the 10.5.4 upgrade was applied are the only PCs that seem to be having problems.
    Any help at all is appreciated. I suspect this is some kind of a SID conflict because the SMB server had to be recreated from scratch, but have no idea how to fix the client, the server, or both to make the computer account creation process work.

    The problem is fixed.
    The issue boils down to an argument between the Open Directory server on bigmac (the OS X Server machine) and the SMB server on bigmac. The crucial information I needed to solve this problem was located here: http://www.radiotope.com/node/61
    The Open Directory database had to be restored from a backup following this weekend's problematic upgrade, and it had a different value for the SID for the Windows domain than the one used by the SMB server software itself. Even stranger was that the Open Directory database actually had the wrong domain name! The It was listed as "BIGMAC" in Open Directory, even though it was set to the correct Windows domain name in the SMB server.
    The solution was to demote the SMB server from a Primary Domain Controller to a Standalone Machine, and then repromote it. Although I changed no values in the settings, and did not modify the plist containing the SID in the Open Directory via the Inspector in Workgroup Admin, after the SMB PDC was repromoted, the SIDs and the domain names in Open Directory and the SMB config agreed with each othe. Now new machines can join the domain and users can login just as they did before. No client-side modifications are necessary.
    Hope this is helpful to someone else. It was quite the hair-pulling experience for a while there.
    Jeff Kirk

  • Can I have two versions of Safari on one machine?

    The question first, then the explanation for the question:  Can I have both Safari 5 and Safari 6 on my machine and run them at the same time?
    I hate Safari 6 & 7 because they combine the search and URL into one bar, which really annoys me.  It requires an extra step when I type in the direct URL I want, because instead of returning the URL, it goes to a search page, and then I have to click the site I want.  Annoying.   So I have not upgraded from Safari 5 on my iMac, which I use nearly all the time.  I have tried Firefox because it still has the search and URL boxes separate, but I also like the little orange arrow in Safari 5 that quickly takes me back to my original search when I've ended up on rabbit trails in my searching and I want to go back to where I was -- Firefox does not have this.  (I dislike Firefox in general, anyway.)
    However, now I'm finding that some websites are beginning to warn me that my browser (Safari 5) is too old and may not work properly.  Now I have found a site for which indeed that is true -- a site I regularly use for my job, and a company which says they will no longer offer support for issues on Safari 5.  One screen is split into two, and I could always scroll the two sides separately, but after an update to the site, now they will not scroll separately.  I have a MacBook Air, which I rarely use, and tested the same page on Safari 6 -- it works on Safari 6.  Thus, the company will refuse to help me and tell me to just update my browser.
    I really like Safari, EXCEPT for the new versions' combined search/URL bar, so I want to keep using Safari 5.  Thus, I want to know if I can have both Safari 5 and 6 on my machine at all, and if so, then I want to know if I can have them both open at the time, for example, if I give them different names (Safari 5 and Safari 6, rather than just Safari).
    This is for my iMac, which is running Lion 10.7.5

    >>I could not see this reply in Safari 5, neither by refreshing the page nor by clicking "Latest reply," which did nothing.
    That's a very common issue with the software that runs these discussions, and usually nothing to do with the browser. Pasting a single character reply, often reveals the missing item(s); as does viewing the thread without signing in first.

  • Can I have several Time Machines in Mavericks?

    I have several boot partitions over several disks. Am I allowed to have more than one Time Machine partition - each backing up different drives?
    The same question was ever asked against Snow Leopard here, and the answer was no, "You can't have more than one Time Machine destination disk active at any one time."
    Is it still the same limit today for Mavericks?
    I have 1 x SSD and 3 x HDD, I just want to use one 1TB HD to back up the 500GB SSD, and the 4TB HD to back up the 2TB HD.
    Possible please?
    Thanks heaps in advance.

    Called Apple Care Support and confirmed that only one Time Machine backup can be active, in other words, only one destination drive can used to perform Time Machine backup automatically.
    Therefore I had to hoose the largest internal HD (4 TB) to back up all other drives (total 2.5 TB).
    Barney-15E wrote:
    I don't think this was the question you were asking, but you can have multiple backup drives, now, but they are just redundant backups, not different backups.

  • I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries to an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

    I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries on an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.  Is this possible? Can I set up a RAID 5 format for redundancy?

    I'd like to store my Aperture /IMovie Libraries on an external hard drive.
    That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
    In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
    Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
    You must have backups on a different disk .. otherwise it is pointless.
    Can I set up a RAID 5 format for redundancy?
    No.. you can buy special USB and Thunderbolt external drives that support RAID..
    BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
    Raid will corrupt all copies of the files.. it is replicated across all disks.
    Delete a photo it is deleted across all disks.. you have no recovery.
    Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

  • How can I choose the volume which I want to restore by Time Machine? I have two volumes.

    Does anyone know how to restore one of two volumes from Time Machine?
    I have been using SSD and HDD on my MBP.Today, I replaced an old HDD to a new HDD and tried to restore from Time Machine.
    Unfortunately, Migration Assistant couldn't choose which volume I want to restore.
    On Time Machine, I could choose the location, but it was just a copy, not a restore.
    Some files address has been changed, so I have to correct the location for every apps on SSD.
    For example, "/Volumes/Macintosh HD/Users/" has changed to "/Volumes/Macintosh HD//Macintosh HD/Users/"
    I want to make a new HDD be exactlly same as an old HDD, so I don't need to adjust file locations or rename the address.
    Thank you in advance.

    In SCORM-compliant LMSs the "mechanism" for transferring interaction data is via JavaScript variables.  SCORM uses a standard JavaScript API that all compliant LMSs are supposed to understand and interpret correctly.  (I use the words "supposed to" because the reality tends to be that they all interpret the standard a little differently.)
    If this is a "locally developed LMS" then all bets are off.  You should in theory be able to transfer quite a bit of information, but with a home-grown roll-your-own system at the other end, you have no way of knowing how it will handle that information.
    You need to talk to whoever built or is currently in charge of this LMS, hopefully someone with technical knowledge and expertise.  Get them to tell you how much of the SCORM standard is actually supported.  Only then will you know if you can use some more advanced Captivate functionality to pass more scoring information (e.g. interaction data as well as score/pass/fail).
    If your current LMS is truly only able to accept a couple of values, and your customer wants more than this, handball the issue back to them.  They'll either have to upgrade their LMS or revise their requirements.

  • With the online package of PS/LR, how many machines can I use this on?

    With the online package of PS/LR, how many machines can I use this on? Can I have it at work and home?

    2 Computer License http://forums.adobe.com/thread/977272

  • I have an SL install disc; how many machines can I install it on?

    I have an SL install disc; how many machines can I install it on?

    frederickmitch wrote:
    I have an SL install disc; how many machines can I install it on?
    If it's a white disk with 10.6.3, technically as many Mac's that came with 10.6.3 or below that can run 10.6.
    Legally, only one.
    If it's a grey disk, then only the same model of Mac, as there are no hardware drivers for other Mac models on the grey disks.

  • How many machines can I install the $79.99 version on?

    How many machines can I install the $79.99 version on?

    If this is a personal purchase, not for a business, then the terms of sale for the Mac App Store state that you may install any software on all computers you "own or control". If it's for a business for installation on multiple computers that are each used by a different user, then basically the terms are one installation per purchase. Here is the official statement:
    If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use by either (a) a single individual on each of the Mac Computer(s) used by that individual that you own or control or (b) multiple individuals on a single shared Mac Computer that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use a Mac App Store Product on a single Mac Computer located at a resource center or library. For the sake of clarity, each Mac Computer used serially by multiple users requires a separate license.
    Regards.

  • HT4480 I have redemption codes for FCP from my university - how many machines can I install on?

    I have redemption codes for FCP from my university - how many machines can I install on?

    Do you have these codes because this will be your app? Or is this a "loan" from the school to install on your machine? Do you use your own Apple ID to redeem the code and install the app?
    If it is your app, then you may install it on as many Macs as you own or have in your control.

  • I'm buying a new MAC.  How many machines can you associate with one CS Cloud account?

    I'm buying a new MAC.  How many machines can you associate with one CS Cloud account?

    You can install the software on as many computers as you like.
    However you can only activate the software and use it on a maximum of two computers at any one time.

  • I would like to add to the Safari toolbar on my ipad 5 IOS 6  machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

    I would like to add to the Safari toolbar on my ipad 5 IOS 6  machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

    You cannot customize the Safari toolbar on the iPad.
    What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

Maybe you are looking for

  • Test call of TP ended with return  0212

    while releasing a transport request, getting the following error message- test call of TP ended with return  0212 your transport request cannot be exported , since all the requirements are not fulfilled calling transport control (tp) program "TP EXE

  • IPod suffering from erratic behaviour

    I was listening to my iPod the other day (in my pocket, with the hold switch on), when the volume began changing from nothing to full and back again. I took it out of my pocket, and had a look at it. The buttons seemed to work with the hold switch on

  • TDS on Foreign payment

    Hi All, while doing invoice on foreign vendors system deducts tds on Fractions it is effect to my TDS filing in NSDL. how to roundoff TDS on Foreign payments.

  • Area type for the depreciation areas

    Hi all, When I'm doing settlement for the wbs - auc,. I'm gettting error "no area exists for cost accounting valuation", when I see the diognasis, it is saying if you are maintaining two different currencies for company code and controlling area., yo

  • Study business process requirements in sd implementation project?

    how to study business process requirements in sd implementation project?