2 layers of Video, one showing just Red Channel

Hi All
I've got 2 layers of video. From one layer, I'd like to use just the Red Channel. On the layer below, I'd like to use just the G-B channels. The result being a composite of both layers.
I thought I'd be able to use the Arithmetic control to knock out the channels and use ADD as the operator for the top later but it doesn't seem to be doing anything - I still see the RGB image on the top layer despite the values changed by Arithmetic.
What am I missing?
Cheers

 good , glad my tip have been helpful.
Often obvious things are forgotten in the heat of the moment  

Similar Messages

  • Download and convert Youtube video to MP3---Just with one click

    Download and convert Youtube video to MP3---Just with one click
    Last week, when wandering around the Youtube watch.com, I was enthralled with the theme song of "Lost", especially the words of the song "I found out, on the corner of first and amistad, where the west was all but won all weeklong, smoking his last cigarette, I said: "Where you been?" He said: "ask anything.""......"
    I couldn’t help expecting to save this song to my personal players. What a delightful thing listening to the song while walking or waiting for a bus! Okay, do you have the same experience as me? When hearing an exciting speech or dialogue, are you thirsty for downloading them and saving as your best memory?
    Download, convert Youtube to mp3?—yes, you can.
    Anna, one of my best friends, has posed a question "I have a Mac notebook and I only need the audio (mp3 music) of a certain Youtube movie, what shall I do?" The solution to the problem is shown as below:
    Step one: Install a Youtube Converter for Mac as follows:
    Step two: import the URL of Youtube video (or batches of URL) you wanna convert using "Add URL" icon. Select output format like audio (MP3) by "Settings" and customize your output file path with "Browse".
    Step three: If you want your output audio much better, you can set the audio resolution like Bit Rate, Channels or Sample Rate presented in the following picture.
    Step four: Click "Ok” button, it automatically download and convert your youtube videos simultaneously. After a few minutes, you can get the desirable audio (mp3) you want and enjoy it on any portable devices.
    Download, convert Youtube videos to iPod, iPhone, iPhone 3Gs, PSP, Creative Zen, Zune, iRiver, and etc. --- done by one click.
    Generally, if you want to download a Youtube video and then convert them to MP3 for your mobile devices, you need two Youtube tools: Youtube Downloader and Youtube Converter. But, now, with Pavtube Youtube Converter for Mac, you can both download and convert massive videos by clicking one "Ok" button.
    Now, all the best, you can enjoy versatile Youtube music at a waiting room, on a bus, traveling, walking around the park or lying on your bed..

    Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.

  • Aperture video missing red channel on playback

    Aperture video missing red channel on playback.  Also some pictures appear to have missing pixels.
    Video played with Quicktime doesnt have the missing red channel.
    When trying to playback video,in aperture, it plays with missing frames, missing pixels and the crashes entire computer. My computer is a Mac Pro desktop with 24 gb memory with 3.33 ghz 6-core processor running Version 10.9.2 and Aperture 3.5.1
    Any suggestions on my problem?
    thanks
    Pat

    Never had anything before crash the whole system since OS8 or so.
    Back up your system, without deleting older backups - just in case; that looks like a possible system trouble.
    Also they some have been in Aperture for a while and they used to be OK.
    Do the videos play in QuickTime Player or any other software, if you export or reveal the originals?
    Can you play your videos, when signed into another user account?

  • Hp notebook just shows a red blinking screen when turned on,can go to esc startup

    Hi I have a Comp Hp presario CQ56 notebook pc,windows 7. I turned on my notebook
    and it only shows a red Compaque screen and it blinks,I can how ever click on esc
    and can go to the startup menu,I have ran the diagnostic tests and everything passes.
    I can't figure out why nothing else loads,I also noticed that it gets very hot I have only
    had it for 9months,could this be my motherboard?I can't boot in safe mode to even scan it
    for a virus.do you know whats causing this and what I can do?
    Thank you

    Your issue sounds the same as the one I am having on my HP Pavilion dv6 purchased 14 months ago. Yikes out of warranty. I have owner only HP's laptops, about 4 so far. I even had a mini HP that I accidently left out in the rain overnight. The screen would not display after that I was surprised it even powerd up but I just keep it and then one day before I was giving it to Goodwill I decided too try one more time. Amazing it started up and worked like before. I gave it to my grandson and he still uses it.
    I also recommend HP laptop to my daughter which I now regret doing because she said she has seen some issue. I told her to take it in she still has a warranty.
    Are you still draining the battery to be able to startup without having this issue? I see that some have completely removed the battery.
    If HP can't help with this issue they need to recall all of the models affected.
    I hope someone can help us.

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • How to show each color channel image of a video on Final Cut Pro X

    Hi, Sir,
    How to show each color channel (R or G or B) image of a video on Final Cut Pro X? I found this feature is useful for the image quality editing, such as the noise reduction.

    Do you mean this?

  • I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is

    I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is my download messed up and not giving me everything I need?

    Got a link showing us which video tutorials you're watching and examples of what's missing in your software?

  • Hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal?

    hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...

    Just do a restart.  It seems to clear it up.

  • RG1 Register updation , one material document is showing in red traffic

    Hi Friends,
    When updating the RG1 Register one materail document with 601 movement type and classification IDH is showing in red trafic light. How to correct this error?
    Actually this material having stock in the plant and that material document posted properly also.
    Please help me frineds?
    Regards
    Satya

    Hi Shekar,
    Actually I have selected first Classification as RMA , i hope this process may update the RG23A.I got all the data properly at simulation and i have taken all those values into register.
    Next step , I selected the classification as IDH and rying to update the RG1 register. Here for some line items (Material documents ) are showing in Red Traffic light at the time os Simulation.
    All ther master data like chapter ID Maintaince and Cenvat determination is maintained properly.
    Regards
    Satya

  • Import window shows video thumbnails - How to show just file names ?

    iMovie 10
    OSX 10.10 Yosemite
    Importing video from external USB HD, the import window shows thumbnails, how to configure it to show just file names ?

    This seems to have a lot of info.
    http://homepage.mac.com/thgewecke/mlingos9.html
    I got the same question marks when I used a translator on the net to make a file called hello world.txt and hello world.rtf.
    doug-penningtons-Computer:~/Desktop dougpennington$ ls
    Dictionary.app russian.txt ???????????? ??????.txt
    Yahoo Search.app ???????????? ??????.rtf
    Dictionary
    russian.txt
    Yahoo Search
    привет мир
    привет мир.txt

  • I copied a video from iphone to PC, it shows "0 kb" in PC and can't play. I deleted the original one in iphone, and no record in itunes as well. Any way to recover it from PC with the one shows "0 kb" now? Any software or program? thx!

    Hi all,
    I copied a video from my iphone 4s to PC, it shows "0 kb" in PC and can't play. I deleted the original one in iphone by accident, and no record in itunes as well. Is there any way to recover it from PC now with the one shows "0 kb"? Any software or program? Or expert of PC knowing how to do it? thx!

    You are out of luck on your PC, since the file appears to be empty, but you can try to recover the deleted video on your phone: http://www.wondershare.com/disk-utility/recover-deleted-photos-from-iphone.html

  • When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

    When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • My ipad will not charge up. it just shows the red battery signal and then switches off

    my ipad will not charge up. it just shows the red battery signal and then switches off. The same charger succesfully charges other idas so i know it is no the charger that is faulty.Any suggestions

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • When IOS7 comes out, will the current iPhone 5 and iPad mini have the finger scanner option, or is it just the new 5S, because in the release videos, they showed an on screen finger scanner, so I was curious whether older models will have this function?

    Please Answer
    When IOS7 comes out, will the current iPhone 5 and iPad mini have the finger scanner option, or is it just the new 5S, because in the release videos, they showed an on screen finger scanner, so I was curious whether older models will have this function?

    The fingerprint scanner will be a function of new hardware.

  • IMovie volume meter shows much red peaking but audio waveform shows none

    When I play my movie, the volume meter in iMovie shows peaking in the red (distortion) all over the place, but in the audio waveform there is not one place where it peaks into the red (or even the yellow).  The whole wave is very close to the 0db line.  It sounds great when I play it and still great after I export it.  But, once I upload it to YouTube, there is awful distortion all over the place just like the volume meter in iMovie indicates.  I can't find any place to turn down output so the volume meter doesn't peak and I don't want to turn my audio waveform down below 0db and lose all of my volume.  I already tried clicking on the Normalize Clip Volume in Audio Adjustments and that didn't seem to change anything, still peaking like crazy in the volume meter.  What can I do to get rid of the red peaking and distortion?
    Here's a little more info for anyone who can help with my problem.  I am using iMovie 11 on an i7 iMac with Lion.  I turned the audio of my video all the way down and imported another audio that had been compressed in Pro Tools to show no red peaks whatsoever.  Can someone please help?
    Thanks,
    Loribella

    When I play my movie, the volume meter in iMovie shows peaking in the red (distortion) all over the place, but in the audio waveform there is not one place where it peaks into the red (or even the yellow).  The whole wave is very close to the 0db line.  It sounds great when I play it and still great after I export it.  But, once I upload it to YouTube, there is awful distortion all over the place just like the volume meter in iMovie indicates.  I can't find any place to turn down output so the volume meter doesn't peak and I don't want to turn my audio waveform down below 0db and lose all of my volume.  I already tried clicking on the Normalize Clip Volume in Audio Adjustments and that didn't seem to change anything, still peaking like crazy in the volume meter.  What can I do to get rid of the red peaking and distortion?
    Here's a little more info for anyone who can help with my problem.  I am using iMovie 11 on an i7 iMac with Lion.  I turned the audio of my video all the way down and imported another audio that had been compressed in Pro Tools to show no red peaks whatsoever.  Can someone please help?
    Thanks,
    Loribella

Maybe you are looking for

  • Not able to create a new Flex project in Eclipse

    I am trying to use Flex Builder 3 eclipse plug-in for development. But while creating a new Flex project in eclipse, I'm getting the following error: Template template.jst.web has not bee defined. I am using Eclipse 3.3, and have installed the latest

  • How to change sign negative to positive in sap script form

    Hi Guru, I had wriiten a below piece of code in my sap script form.Now I need all the negative sign to be convert to positive number means if KOMVD-KWERT = 123,98.00-  ,    then require 123,98.00 .. And for this I know the synatax is &KOMVD-KWERT(S)&

  • Digital media card reader

    hi  when i using digital media crad ,it says very slow response and called not not responding and after 2-3 min its ok  and i if i try to move another picture it say the same . i m very fed up to hp pavillion g6 1159 laptop  ,  pls tell me if any sol

  • I restored my iphone 4 but it keeps making me restore it

    I had to reset my iphone 4 to the factory settings and then restore it. Well i have restored it atleast six times and it still is making me restore it. What do i do???

  • Need some help logic keeps crashing

    here is my error report i would really like to keep working on this project as its weeks worth of time ive spent on it any help will be appreciated my problem first started when i hit the reorganize memory button in song information, it told me i had