2 Location, one common Capacity - SNP Impact

Hello APO Community,
We have a scenario, where physcially there is only ONE Capacity in SNP, but logically it's used in 2 manufacturing location. We are planning to use SNP Production Planning and also Capacity Planning.
What are the Disadvantages of this logical split.
What function do we need to do Capacity Planning and also Production planning. The planned orders will be generated in 2 seperate location with 2 different capacity names(but practically it's one capacity)
Thanks
Samson

Hello,
As Satyajit as explained: We have a manufacturing location 'A' which is capable of producing 100 quantity per day. But on R/3  it's configured as two manufacturing plants representing the same, which is   'A' and 'B' with production capacity of 50 each.  'A' and 'B' with production capacity of 50 each. But in realtime scenario the capacity planning must be at aggregated level. We need to see the orders and Capacity simulatenously.
Basically question is, how do we do capacity planning, since orders are split in 2 locations for the same capacity and also how do we do scheduling. And are ther any more functions which gets effected by this logical split.
Regards
Samson
Edited by: sam son on Dec 18, 2008 3:16 PM
Edited by: sam son on Dec 18, 2008 3:16 PM

Similar Messages

  • I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

    I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
    We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
    now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
    I have chek the DNS and nslookup all are correct but this is generate error. 
     Is this possible Mumbai location join with this Domain(CAPLDC)???
    One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
    Pls find the error message below and also find the attachment.
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "capldc" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
    The following domain controllers were identified by the query:
    capldcserver.capldc
    win-dyfq2poc88q.capldc
    However no domain controllers could be contacted.
    Common causes of this error include:
    - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
    - Domain controllers registered in DNS are not connected to the network or are not running.
    Pankaj Kumar

    Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
    Please refer to the articles below to fix your current issue:
    http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
    http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I wish to del one apple id and make one common for mac and i phone, please suggest

    i wish to del one apple id and make one common for mac and i phone, please suggest

    You cannot delete an Apple ID, you just stop using it. Understand that any apps purchased using that ID can only be updated with it. Apps are tied that ID used to purchase them. If you want to use a new ID for everything, you will need to repurchase any old apps using the new ID.

  • I transferred my music to a larger hard drive and when I went to sync to iTunes there half my library had a '!' next to the songs. After I located one song the question 'would you like itunes to find other missing files' came up. What does this mean?

    I recently transferred my music from one external hard drive to another and when I went to sync it to iTunes half my music had a '!' symbol on the left side, which meant that the songs weren't located. When I went to locate one of the songs it asked me if I wanted iTunes to find other missing files, which I said yes. What happens next and what is iTunes doing to find the missing files? 

    iTunes is a database.  When you import songs to the database, it records the location of that song, so that when you play, or sync the song iTunes knows where to look for it.
    When you moved your music to a different location, iTunes can't find it because you didn't tell iTunes that you moved the music.
    You'll have to re-add those songs that you moved to your itunes library.  Your best bet is going to be to delete all the songs in your library and then go to File > Add folder to library > and then find your music folder on the new external hard drive.
    Also, the external drive HAS to be connected in order for iTunes to find it.

  • Cannot locate one friend but she can locate me

    Cannot locate one friend but she can locate me

    Hey Jennyadriana,
    Sounds like you may be experiencing an issue with the Find My Friends app. I have an article that will help you troubleshoot this issue with finding your friend in the app:
    iCloud: Troubleshooting Find My Friends - Apple Support
    http://support.apple.com/en-us/TS4008
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Tow internal table to one commone internal table

    hi
    i have two internal table
    itab1 having fields
    f1
    f2
    f3
    f4
    and second internal table having fields
    HERE F1 IS COMMON FIELD BETTWEEN TWO
    f1
    f5
    f6
    f7
    f8
    f9
    f10
    i want the data of both the internal table into one final table having data
    F1
    F2
    F3
    F4
    F5
    F6
    F7
    F8
    F9
    F10
    IE COMBINED DATA OR BOTHE IE I AM ADDING THE COLUIMNS OF INTERNAL TABLE 1 AND INTERNAL TABLE 2 TO FINAL OUTPUT TABLE
    PLEASE SUGGEST ?
    REGARDS
    ARORA

    hi RAAM
    the situation is like this
    her is the internal table with data and rows
    IT_APC                         Table[58x64]     
    it_dep                         Table[14x48]     
    it_Dep_Apc                     Table[1x108]     
    now iand combining data of itapc and itdep to it_dep_apc
    both have only one common firled bukrs
    and as rows and columns as displayed above
    now if i do below as suggeted by u
    LOOP AT IT_APC INTO WA_APC.                                                                               
    READ TABLE IT_DEP INTO WA_DEP WITH KEY BUKRS = WA_APC-BUKRS      
    BINARY SEARCH.     
    then the all the data is not combined i suppose as i need to have the final table all the data from both the internal tables....
    ie common rows plus extra rows for bukrs
    regards
    Arora

  • I can't anymore locate one of my friends on find my friends app

    Since last friday, I can't anymore locate one of my friends on find my friends app. All my other friends can be located.
    I asked him if he turned the hide from followers tag on. He told me he didn't. He told me as well he didn't turn the location off.
    But he just told me that when he opens the find my friend app it opens and closes immediately.
    How is it possible to fix this problem?

    I personally would suggest to delete and re-download the app from the app store.

  • Storage Capacity - SNP

    Hi Gurus,
    My client needs to maintain storage capacity in the system, as the warehouse cant hold more then 6000 units in that particular location.
    We are running deployment optimizer & if in case the capacity is more then 6000 units then it has to route to other warehouse.
    I have seen an option in location master as storage capacity, but it is more specific to replishment orders for SNC. If i use this will there be any other side effects in the system.
    Is there any other place where i can maintain the storage capacity, so that if it cross's the limit then it will route to other locations, kindly help me in this regard as it has to be addressed ASAP.
    Regards,
    Arabind

    Hi Arabind,
    One method to do this would be as follows.
    Define a storage resource (category S) in Res01 tcode and define capacity per day in units in the "Definitions" area
    Assign this storage resource  to the location master in Storage Resource field in resources tab
    or define the capacity in M3/pallets etc... in the storage resource and
    Maintian the consumed per unit in Storage Cons.per BUn field in GR?GI tab of product master
    This would restrict the maximum storage in the location.
    Thanks & Regards,
    Ashok

  • How can I use two different wireless home phone terminals, different locations, one at a time same phone number

    I have two locations and want to have a wireless home phone at each location with the same home phone number. Only one terminal will be used at a time.

    That's not what a cell phone is.
    You are talking about some kind of a separate communication system.  Like a walkie talkie or something that works over broadcast.  IP phones may be able to do something like that but you would somehow have to register the system to a single cell phone number, which wont work without a SIM card.

  • Two vendor locations, one planning location

    Dear all,
    For several reasons we have two vendor location codes in our ECC-system representing the same location. In APO we want to treat both locations as one. So plan on one (main) location, only when interfacing with ECC we want to distinguish to the differrent parties.
    To achieve this in SNC we would use the business partner setup to combine both locations.
    Is this setup also available in APO?
    Can you combine two vendors into one Business Partner?
    And then still run deployment / heuristics / etc.
    Arjen

    Hi
    It may be too late to reply this.
    Just a thought, if you are sourcing from these vendors, in APO you can define quota rules (50:50) so that both the locations will be considered for receiving demand and subsequent planning in APO. You might need to test this.
    Thanks
    Amit

  • Need to find out the Cost center for one location, one cost center

    /* Formatted on 2015/02/27 08:34:29 AM (QP5 v5.215.12089.38647) */
    SELECT DISTINCT cost_centre
      --  INTO l_cost_center
      FROM (  SELECT DISTINCT                                 --pap.name position,
                     haou.organization_id org_id,
                     haou.LOCATION_ID,
                     pcak.concatenated_segments cost_centre
                FROM                              -- per_all_positions         pap
                    per_all_assignments_f pasf,
                     hr_all_organization_units haou,
                     pay_cost_allocation_keyflex pcak,
                     HR_LOCATIONS_ALL_TL l
               WHERE     pasf.organization_id = haou.organization_id
                     AND haou.cost_allocation_keyflex_id =
                            pcak.cost_allocation_keyflex_id
                     -- AND pasf.position_id=pap.position_id
                     -- and pap.primary_position_flag = 'Y'
                     -- AND haou.business_group_id=101
                     AND pasf.LOCATION_ID = l.LOCATION_ID
                     and l.language='US'
                    -- and l.organization_id=haou.organization_id
            GROUP BY haou.organization_id,
                     haou.LOCATION_ID,
                     pcak.concatenated_segments                    --pcak.segment2
                                               ) Pos_cc
    WHERE pos_cc.location_id =
              (SELECT DISTINCT location_id
                 FROM hr_locations_all
                WHERE location_code = 'Pinelands'                  --i.branch_name
                                                 AND ROWNUM = 1)
    Please help me with this query, I am new to HRMS modules. Need to understand that why for one location it is coming multiple cost center.
    Please help me understand this. I need to pass one value in INTO of this query.
    Thanks,
    Syed Hasan

    Cost centre is stored at the Organization level.
    And many Organizations can have the same location, so for a location you can have different cost code combinations.
    If you need just one segment(location segment), then it could be unique.
    So , instead of pcak.concatenated_segments cost_centre use pcak.segmentX  (X could be 1,2,3 etc based on your flexfield definition)

  • Pulling in data from two cubes in one common report in OBIEE

    Hi,
    We have a scenario wherein we are using Oracle OLAP Cubes as data source for reporting against OBIEE v10.1.3.3.2. The specific question that we have can be exemplified as below:
    The Analytic Workspace (as created using AWM) has the following seven dimensions:
    Dimension A
    Dimension B
    Dimension C
    Dimension D
    Dimension E
    Dimension F
    Dimension G
    Based on the above dimensions, we have the following cubes:
    Cube One : Dimension A, Dimension B, Dimension C, Dimension D and Dimension E
    Cube Two : Dimension D, Dimension E, Dimension F, Dimension G
    So essentially, we have two cubes in the same Analytic Workspace and they do have a few dimensions in common.
    What we now need to know is how best to include these two cubes in the same logical model in the business and presentation layers of the OBIEE repository - this needs to be done because we want to include measures from both the cubes in a common report.
    Any ideas on the implementation of this scenario are highly appreciated.
    Regards,
    Piyush

    Hello Wildmight,
    I am sorry for the duplicate updates - and I regret the inconvenience caused.
    Here is what we are trying to achieve:
    We have a Business Domain wherein two measures are of importance : M1 and M2. Also, we now know that M1 and M2 are dimensioned as below:
    M1 - Dimensions A, B, C, D , E , F, G and H
    M2 - Dimensions C, D , F and G
    Hence, we are looking at an AW with 8 dimensions and two cubes : One for M1 with 8 dimensions and the other for M2 with 4 dimensions. Also, here comes the need to have a report wherein we can see the values of M1 and M2 in the same report and then do some calculations and analysis using both the figures at the same time. What we now need to know is how best to include these two cubes (which have 4 dimensions in common) in the same logical model in the business and presentation layers of the OBIEE repository so that we can address the reporting requirement of having values of M1 and M2 in the same report.
    Any help is much appreciated.
    Best Regards,
    Piyush

  • One common plant for 15 company code , is it

    Dear Friends,
    I have to make 15 company codes , but all company code have common plant that is centralised plant (1CEN) , but in SAP system does not accept it.
    System gives message- "this plant is allready assinged to company code - XXX "
    How can solve this ?
    Regards,
    Mahesh.

    Hi,
    One plant can not be assigned to multiple company codes, as plant/plants is/are company code specific
    The concept of company code is a business organization with association or collection of individual of real persons who each invested some form of capital. This group of individuals has a common purpose of installing plant; manufacture goods and sale the goods aiming for gaining profits which in turn company with company code is itself considered a "legal person". So in this system how other company code can come & do activities {Manufacturing, Processing, and Selling) in the same plant with same sales area.
    Regards,
    Biju K

  • J2EE BluePrints: correct location for common Java source files

    I have a set of Java source files that are common between multiple J2EE applications.
    Within the J2EE package hierarchy, what is the correct location for these files?
    Also, is there a typical package name that common Java source files are grouped under?

    HI,
    There is no standard place. In the blueprints project conventons
    http://java.sun.com/blueprints/code/projectconventions.html it has a place called components/ which would contain shared components like EJBs and other components that could be shared across applications. the package naming would be reflected in that, like com.sun.blueprints.application1. and com.sun.blueprints.application2. and com.sun.blueprints.common.*
    Generally you could put a directory at the same level as the apps (not inside an app's directory structure) and maybe called common/ or shared/ . This common code could be built separtely and into a binary library or jar that you just include in the other applicatons, in the same way you would include some external library jar that you got somewhere and keep in your workspace and your apps use. The packaging of common code is similiar to the packaging of different applications and shared components.
    hth,
    Sean

  • Does Find My Iphone Connect To Random Wifi Networks In Attempts To Locate Ones Apple Product ?

    I am and though i have my music backed up was wondering how efficent is this service ? Does It Connect To All Every Or Any Wifi Networks In Range To Help Find Product ?

    The device must be connected to a wifi network (unless it's an iPhone, which can also connect using cellular data) in order to be located with Find My iPhone.  This means that it must be ibe a known wifi network (one that it has connected to before) in order to be located, not a random one.

Maybe you are looking for