2 Midi Interface - how to seperate them while recording

Hi
I use a Firewire Focusrite Liquid Saffire 56, which has a bulit in Midi Interface.
I also have an M-Audio USB Midisport2x2.
I would like to record MIDI DATA from a TD-12 Modul, which is conected through the Liquid Saffire
and also want to record MIDI DATA from a StagePiano using the M-Audio Midisport.
How can I sperate them from each other. I get a whole mix of both.
How can I assign Inst. Track 1 to the Liquid Saffire and
Inst. Track 2 to the M-Audio Midisport?
Thanks for suggestons and advices
Martin

on each track, in the inspector, change the port setting to represent your device
make sure each track has a unique midi channel assignment and not set to all
in settings>Recording. there is a check box that says "auto demix by channel if multitrack recording" make sure it is checked

Similar Messages

Multiple iphones same apple id, how to seperate them

i have multiple accounts on one apple id, how do I create another and seperate them

if it's a family situtation where you want to all share app and music purchases, you can stay signed into the same apple id in the app store (lots of people do), but you need to sign out of the apple id in imessage and facetime so messages don't get crossed over
you can either create a new apple id at appleid.apple.com, or you can do it on the phone after you've signed out of an apple id. when you tap 'sign in' anywhere that requires an apple id, it should give you the option to create a new apple id

HT201269 My Apple ID and icloud ID are being used on 2 different iphones. I can't figure out how to seperate them completely. Can someone help me with this?

I have somehow linked my Apple ID and icloud ID to 2 different iphones. I need help on how to disconnect one of the iphones from my ID and give it a new one. Hopefully without losing all of the saved information on the phone (contacts, pictures, etc)
Can anyone help me with this?

Hey shelldolfin,
Thanks for the question. To disassociate a phone from your Apple ID and iCloud account, simply sign out of the following services:
- Settings > iCloud (When prompted, opt to keep the information on your phone)
- Settings > Messages > Send & Receive
- Settings > FaceTime
- Settings > iTunes & App Store
For further information, see this related article. While it refers to what to do after you change your Apple ID, you can use the helpful information to achieve your end goal:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M.

2 peoples music on itunes, how to seperate them?

I have just purchased my first Macbook pro and have added my husbands and my music from an external hard drive to itunes and now i have created our itunes accounts how do we separate our music so we can sync to our phones?
What will happen to the shared music we have?

Emma Maree 505 wrote:
how do we separate our music so we can sync to our phones?
check out methods one and two in this support article.

Sound crackling while recording (X-FI TITANIUM)

Hi. I previously posted a problem with sound recording with the X-Fi Titanium (PCI, non-Fatalty)? on this forum. I thought the problem was fixed, but in reality it was just not noticeable. Now that I am trying to record in-game footage, it's nearly unbearable. Every few seconds, a crackle or pop sound of varying volume and length comes into the recording. There's no problem with the output of the card whatsoever; in fact, when I'm recording the in-game audio, I don't hear a thing as it occurs. It's only during playback that this happens. What could be causing this problem? I'm up to date on all drivers, I think (6.0..347, according to my Control Panel)
I'm running Windows XP 32-bit on a P5E motherboard with an X38 chipset, an Intel Core 2 Duo E6750 at 2.67 GHz with 2 GB of ram, and an nVidia 250 GTS. I am not overclocking, and I am running on default fan speeds. I've heard of crackling and popping problems on 64-bit operating systems, but never on 32. I've run out of things to try, so I am now turning to the community to help. Any suggestions?
EDIT: I just remembered that I have an onboard soundcard on my motherboard that was deactivated when I installed the new one into my computer. Could that be causing the problem?
EDIT 2: I wanted to clarify one thing. The crackling sound is loud, but it lasts from a second to three seconds then goes away for fi've seconds or so, and then comes back. It isn't constant or muted - it even goes louder than the volume by which I'm currently recording. I've never read about this problem, and every other topic seems to refer to a constant crackling.
EDIT 3: I used Audacity to record an example of the problem I'm getting. I don't hear any of this when I play the song; only when I listen to it back. It's the Prelude from the Final Fantasy series (pardon the nerdiness). It skips to halfway through about fi've seconds in to get to a louder part, to better demonstrate the problem. And no, you aren't getting Skype messages, I was just receiving them while recording "What U Hear" with Audacity. I hope this hel
ps.
http://www.tindeck.com/listen/xkje

Same thing here... X-Fi Titanium Fatalty Champion, P5E3 Deluxe (x38)..using Windows XP SP3
check it out ftp://ftp.int3.ru/X-Fi_Recording_Sample.rar

ITunes no longer recognizes midi files how can I play and convert them?

iTunes 10.3 recognised midi files, I could "move" them to the iTunes library and select them. then click on "Advanced" and "Convert to AAC" (or to MP3 etc).
iTunes 10.5 will not recognise midi files.
I think an older version of GarageBand could also read and convert midi files, but this no longer appears to be the case either in the latest version.
How can I now convet midi files? Has Apple decided to simply ignore them?

Thanks to Limnos, I now have some further things to try, but in the meantime I found I had been maligning GarageBand 11. Indeed its built-in Help system doesn't seem to mention Midi files at all, but I found out how to insert them from Apple's on-line support system at http://support.apple.com/kb/PH2009 and it works superbly well - one can even change the instruments on individual channels etc and then save the lot as an AAC (m4a) or mp3 etc file.
I also loaded up an old version of iTunes, version 10.3, which still recognises Midi files and can convert them to AAC or mp3 but in so doing some volume seems to be lost.
But the winner so far for me has been Audacity, free software. One needs to add a LAME encoder for mp3 output, I installed Soundflower and routed the playback of the midi file available in the Finder (in fact for the whole machine, while playing the midi file) and declared Soundflower as the input for Audacity. I could then use Audacity's effects menu to increase the volume throughout the track and save it. I then, using the Sound preferences of the machine, switched back to the inbuilt speakers and was able to listen to a higher volume version, playable in iTunes 10.5. More faithful to the original midi file than the GarageBand version.
See instructions at http://ask.brothersoft.com/tags/convert-midi-to-mp3/ and in particular one of the links http://ask.brothersoft.com/how-to-convert-a-midi-to-a-mp3-using-audacity-26125.h tml
This is for Windows but for Mac it's very similar/ - still Audacity. BUT the instructions in the last link don't seem to quite work, which is why I had to use Soundflower. I can import the midi file, I can select it, but then the export item on the file menu remains greyed out and unuseable, so I must presumably be missing some plug-in. Also Audacity keeps telling me it can't find various ffmpeg files even though I thought I had installed them correctly. I'm obviously missing something here, but at least I can now get my midi files into aac or mp3 format again at last.
For Soundflower see http://cycling74.com/soundflower-landing-page/ and http://kineme.net/forum/General/soundflowerforlion
and there is a useful tutorial by Nowjobless on YouTube at
http://www.youtube.com/watch?v=r3FGOIW08gA&feature=related
Good luck to anyone else facing the same problems, it remains to be seen how to "convert" midi files to mp3 in Audacity without recourse to Soundflower.

RE:CS5: Video and sound are one, how do I seperate them?

I was using two cameras to do my work. One was a canon and the other a nikon. When I imported the canon footage it came in two parts audio and video but when I imported the nikon footage, there was no section of audio, there were both on video.
How do i seperate them? I don't want any of the audio from the video but want to add my own it.

JAKE JONSON wrote:
Yes - I think Ann has the answer. Imported files from some Canon cameras will have their audio track come in on Audio 4 while their video comes in on Video 1. Frankly I see this as a bug but I'd love to hear the reason for this 'undocumented feature'.
No its not a bug.
Here is a video explaining why.
http://www.video2brain.com/en/lessons/why-does-audio-not-go-to-the-track-where-i-drop-it

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Cant hear song playback while recording with external USB Interface Mic in Garageband

Hi there
There must be something wrong with my settings in Gargaeband/Mac Sound Settings.
I have Garageband 9 (V5.1) running a song I have already recorded using a USB keyboard.
I want to record using my external mic and my USB Audio Interface, so
I select New Track> Real Instrument
I plug in my Yamaha Audiogram 3 USB AUdio Interface and I get a pop up stating
"Garageband is scanning your system for audio devices, and has detected a device named "USB Audio Codec"
If you want to use this device do not disconnect it during the scanning process.
Do you want to use this devise No/Yes."
I select Yes and INPUT SOURCE changes from
Mono 1 (Built-in Microphone)
to
Mono 1 (USB Audio CODEC)
I can see the signal lights lighting up on the audiogram 3 when I talk into the mic, so theres no problem there.
Also when I hit record I can record audio using the mic, and can see the levels (and the audio wave I am creating being drawn on the screen) but I cannot hear the track itself when I am recording using the mic. Nor can I hear the track or the new mic recorded audio AFTER I have hit stop.
The only way to hear the song again with the newly recorded mic track is to unplug the Audiogram 3 (Then I get another Pop-up stating
"The audio device "USB Audio CODEC" has been disconnected!
Do you want to switch to Built-in Audio or quit Garageband?"
I select USE BUILT-IN AUDIO)
Then the input source changes back to
Mono 1 (Built-in Microphone)
And I can hear the track again.
So my problem as you can see if that I cant hear the track while recording using the microphone with the Audiogram 3.
But I can record video with audio using the audiogram 3 USB Audio Inteface and mic using photobooth when I select change Sound>Input to USB Audio Codec in system preferences
It therefore assume it must be a problem with the internal audio settings of the mac/garageband.
Can anyone advise?
thanks!

I can see the signal lights lighting up on the audiogram 3 when I talk into the mic, so theres no problem there.
Also when I hit record I can record audio using the mic, and can see the levels (and the audio wave I am creating being drawn on the screen) but I cannot hear the track itself when I am recording using the mic. Nor can I hear the track or the new mic recorded audio AFTER I have hit stop.
In order to hear yourself while you are recording, you need to set Monitor to "ON" under the Track Info panel.
Also, what are your sound output settings? It sounds like you haven't selected the right output source.
If your speakers or headphones are plugged into your audio interface, then you need to go into Preferences -> Audio/MIDI and select your audio interface under Output as well as Input. If your speakers or headphones are built-in or plugged directly into your computer, then you need to select Built-In under Output.
I have a sneaky feeling that you are in the latter scenario, and that when you plug in your audio interface Garageband is automatically switching both Input and Output over to your interface, which means no sound output as long as the interface is plugged in.

How do I get live audio playback through headphones while recording a performance of a song on iMovie through external mic?

Hard to explain but hopefully I can get the question across. If anyone can give me some tips on how this will work it would be greatly appreciated!
I like to perform songs of my own in iMovie and upload them to YouTube. The problem I am running into is when I try to record the song through an external microphone the sound will not playback (while recording) through my headphones. The audio and video do record just fine but I would like to be able to hear through my headphones WHILE I record into my external microphone so I can hear how it sounds as I sing. Is this possible? As I stated before, everything works fine but I cannot hear how I sound WHILE I am recording through my headphones. Thats all I want lol. Thanks!!

Did you ever find the answer to this problem? I have the same issue.
Cheers
DAn

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers

How can I use zoom while recording on my iPhone 4S?

How can I use zoom while recording on my iPhone 4S?

Christina_319 wrote:
How can I use zoom while recording on my iPhone 4S?
You can't change the zoom while recording.

How do I monitor and record a MIDI instrument on Garageband?

I may be missing something simple in Garageband setup. I want to monitor and record a drumkit via its MIDI output. It is a Yamaha DTXplorer so I have Subtlesoft Midipipe installed and a Focusrite Saffire 6 USB converter. Microphones and guitars are being monitored and recorded with without problem. When I connect the Focusrite to my Macbook air and drumkit the MIDI indicators are blank, no MIDI input detected by Garageband. Then I close GB and launch Midipipe, the MIDI input detected light on the Focusrite illuminates and GB detects one MIDI input (Saffire 6) in preferences window. But if I select new track/software instrument Saffire 6 input is grayed out and so cannot be selected (if I select the mic or guitar sources it is bold and can be selected). If I go ahead and create the software instrument there is no monitor button and nothing is heard or recorded.

What is the best way to uninstall and reinstall the Focusrite MIDI interface driver. And to uninstall and reinstall the Subtlesoft Midipipe (which is required to get the correct mapping for a Yamaha drumkit)? This was done for me at the Apple Store One On One session in a prior attempt to fix this problem but obviously it did not work. I'd like to try it one more time with the drumkit connected. I did see a screen at one point which allowed me to select the inputs from the Focusrite but I could never find it again. I don't think it was a Garageband menu but somewhere else, maybe during the driver or software install for the Focusrite. I would love to get back to that screen again and take a hard look at it.

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

HT1391 I've purchased several seasons of a TV show, but instead of having them in seperate folders like they were when I bought them they put them all in one folder. How can I seperate them into seperate folders again?

I've purchased several seasons of a TV show. But in my iTunes library instead of them being in seperate folders like they were when I purchased them they were put all in the same folder. How can I seperate them again?

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

2 Midi Interface - how to seperate them while recording

Similar Messages

Maybe you are looking for