2 mta in the same host

hi,
i'm trying to make some test with an antivirus. i have only one server i installed ims 5.2 (smtp at port 10026) with iDS 5.2 (port 389), and i installed another iMS in the same host but the smtp is at port 25, before i install the antivirus software i tried to make some test with the IMS.
both iMS share the Directory Server.
first i send an email at port 25 then the server send the message at port 10026 in the same sarver (i saw the logs and it did it) but in the instance that use the port 10026 only enqueue the mail, does anybody have any idea of what is going on!, maybe the things i'm testing are wrong. ....
When i run the ./msg-stop smtp in the instance that use the port 25 then the instance with the port 10026 delivery the enqued mail..

thanks for your answer..
i read the documentation that you send,
but the documentation of the antivirus say that needs two mta to make a special configuration, the thing is the doc say that needs 3 servers:
1 mta/IN (pto 25)
1 server AV (100025)
1 mta (pto 10026)
the thing is that i only have one server, and i'm trying to do the same configuration with my server..
The people that sell the Av software said that they can do the same configuration in one server but using like mta Postfix.
i'm tryin doing the same with IMS.

Similar Messages

SSO within an ABAP+JAVA on the same host

Experts:
We have a dual stack (ABAP+JAVA) NW04s on the same host.
The usage type EP7 is enabled.
From this EP7 we want to access its own ITS thru SSO.
We configured the SSO just like we did for the EP7 + ECC on 2 different hosts.
However, we are always asked for an ID/password when trying to test the SSO from the EP7.
The error is:
"SSO logon not possible; browser logon ticket cannot be accepted"
Please advise. Points guaranteed. Thanks!

hi,
I also tried to do the same, but i think it's not possible.
I read somewhere that SAP recommends to use different instances of ABAP and Java. I installed seperate ABAP and Java instances on the same host and then configured SSO using the Configuration Wizard in NWA configuration. and it works perfectly.
regards,
Ankur

How to Create Primary DB and Physical/Logical Standby DB on the same host?

Now I encounter a issue. I want to create one Primary DB and one Physical standby DB and one Logical standby DB on the same host.
Create this env on the same host aims to test whether we can using EM Patching DP to apply patches on Primary/Physical/Logical DB successfully.
I try to setup this env but fails. I want to know more related issues about create Primary DB /Physical DB/Logical DB on the same host and how to configure between them.
Below steps is my try:
1. Create Primary DB on the /scratch/primary_db
2. Create Physical Db software only on the /scratch/physical_db
3. Create Logical Db software only on the /scratch/logical_db
4. Using EM Wizard to create physical standby database and logical standby database, and these two targets can show up on the "All Targets" Page.
5. But when using EM Patching DP, it fails and the reason is the listener of physical and logical db cannot configured well.
Issues:
So I want to know about how to configure physical db and logical db's listener using EM or manually?
If the listener name of Primary Db is LISTENER and the port is 1521,and the listener.ora is under the /scratch/primary_db/network/admin directory, then how to config physical db and logical db's listener's name and port?

Hi,
As this a test case then you need to create two more listener for each Oracle Home (/scratch/physical_db & /scratch/logical_db) make sure that they have different names and ports.
Then add the new listeners manually using GC?
Try it and let me know
Regards
Amin

Two databases in the same host.

Hi Group,
I have a doupt, It's possible that two databases with the same name, live in the same host, if they have different OracleHomes, and the SO users who were installed with are different? eg.
SO user: oraqas
OracleHome1 : /qas/u01/app/oracle/product/9.2.0
BD: prdsia01
SO user: oracle
OracleHome2: /u01/app/oracle/product/9.2.0
BD: prdsia01
If not, what do you recommend?
Thanks a lot

It's possible that two databases with the same name, live in the same host,
if they have different OracleHomes, and the SO users who were installed with are different? what is "SO users"?
what is "BD: prdsia01"
Yes, two Oracle databases with same ORACLE_SID can reside on same system as same time.
The only restriction is that only one instance can be online at a time.

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?

As far as I remember 10.1.2.2 was not supporting installation of multiple OID on the same host?
Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?
TIA

Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
Please don't consider this plan for production instances!
Thanks,
Hussein

Is the 1000v supported on the same hosts it manages yet?

Question posted to our Twitter account from @SlackerUK
"Is the 1000v supported on the same hosts it manages yet? Thanks"

http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg.pdf
Chapter 5: Running a VSM and VEM on the Same Host
/Prasad.

Can smb and afp coexist on the same host?

Greetings all!
I've been using Macs and OSX for a year. And recently I bought another MBP so I am seriously considering Time Machine backups. I have a Linux home server running Ubuntu 12.04 and Samba and my previous MBP running Mountain Lion connects to it happily without any problem. But my trouble started when I tried to setup afp on the same box.
I followed this post and this post and got the fake time capsule showing in Time Machine without any problem. But soon I found myself unable to connect to the old samba shares. The smb host now displays as a Time Capsule. If I click on that OSX will say 'failed to connect'.
As I understand there are 2 pieces involved on the server side, avahi to broadcast the service info and netatalk to provide the service itself. It's a bit like nmbd and smbd in Samba. If this is true then it's somewhat understandable that OSX can not display the same host as 2 different types of services at the same time. So I stopped avahi-daemon and very soon the old Samba shares appeared again.
I am able to connect to both services using command+k but I would rather have them running normally so that my wife will be able to use them without extra tech support. Can anyone tell me if what I said above is true and/or if there is a graceful way around this? If answer is no then I will have to create a virtual machine or nic alias just for time machine and I think it's quite a waste.
Thanks!

tristonej wrote:
I don't quite understand why people buying non-Apple devices should not expect OSX to work with them
Because Apple has no control over 3rd parties. They can do what they want. If Apple publishes a new authentication mechanism in 2002, the 3rd party doesn't have to implement it. That isn't Apple's fault. If they do get around to supporting it in 2009 and then some 4th party doesn't bother to use the 2009 code in 2011, Apple still can't do anything about that. If anyone else wants to advertise, and support, Time Machine compatibility, they are welcome to do that. They definitely have the advertising part down, the support, not so much.
There is a time when apple only worked with apple but that aparently was not sustainable. And that's why now Apple is embracing smb
Apple's goal is to choose the best solution for its customers. Sometimes that is a proprietary connection or protocol and sometimes it is something industry standard. In all cases, there has to be some cut off for testing and support. That is why Apple eventually stops supporting its own hardware and technologies at a certain point. That is also why Apple will support SMB as deployed by Microsoft but isn't going to waste much time on home-built Linux servers.
(it's said even samba was used shortly on OSX, not quite sure) and allow users to install windows on macs. Even OSX itselt is based on FreeBSD and uses quite a lot of open source components.
Apple uses a lot of open source software. Samba was one of those projects. Unfortunately, the people that made those products didn't want Apple using them so they changed the licensing to prohibit Apple (and pretty much only Apple) from using their source code. That is why some of the open source packages in OS X are stuck in a 2007 version. That is also why Apple abandonned Samba and wrote its own SMB implementation.
OS X is not based on FreeBSD. It has a BSD-flavoured POSIX layer, but it is a distinct operating system at its core.
IMHO there is no magic in throwing money at propiretary hardware/software or praying to Steve Jobs. If something is not working, it must be that there is a bug in the code or the design. And neither OSX nor Macs are built by God, which means they are bugged as other software/hardware.
I'm confused. When did anyone say anything about praying to Steve Jobs or divine technology? You asked about using Linux as a Time Machine server. I suggested you avoid that if you value your data. I also asked why you would want to keep running Linux now that you have a Mac. A Mac can do anything Linux can do with a fraction of the effort.
The answer is simple, Macs can not do what I want.
Which is?
Withe a standard mATX case I can have quite a few 3.5" drive bays while there is only one 2.5" in a Mac mini. And with Ubuntu/Debian, getting/updating the software or the system is quite easy, just one or a few lines of apt commands, not quite possible with OSX.
That's certainly true. OS X updates itself without having to run any apt commands.
If you must compile something from the source to get a Linux running then something must be seriously wrong.
My thoughts exactly. But perhaps you didn't follow me entirely. Apt, yum, etc don't have everything one needs to setup something as fancy as, I don't know, a web server. While I did have to compile a number of things from source, I had to actually edit the source a couple of times as well.
The best thing I love about Linux is openess. You can customize almost everything and change it whatever way you want. With Mac, for example the 2013 Retina MBP I just bought, it's not even possible to change the power button behavior, which is very annoying.
Then why did you buy a Mac? That's no big secret. Some people like not have to configure everything just to get it running. I have other things to do than edit config files.
Back to my original question. I think the problem is not quite with compatibility of Bonjor but rather whether OSX can show this or not. Imagine you have a smb share and afp share on the same host, with the same name, how would OSX display it? And which icon will OSX use to display the host? I can not think of the answer so if you know please tell me.
OS X will just display it like it display any server. One of your links event has instructions on how to pick the icon you want to fake. If you are running both services then I am not sure which one it would try to connect with. Neither of your services are native, not matter how much they try to fake it. If you wanted a specific service you would have to manually use the correct protocol in Finder > Go > Connect to Server. However, bot of those links were posted before Mavericks. Obviously they don't work anymore. It's Linux. It's open. Right? So fix it and post it on your own blog. I do not know what modifications you would have to make to either Samba or Netatalk to make them work with Mavericks.
If all you need is to allow your wife to connect to one specific protocol, then manually connect to that service, saving your password in the keychain, and create an alias by Command-option dragging the server to some other folder. Then, she can just double-click on the alias to connect to the network.
Now, if you really want to be clever, you can setup an automount to that service instead. Then the server will be mounted and unmounted as needed.

RMAN restore database from another backup of different database in the same host

Hi Experts,
I have taken FULL Database Backup using RMAN , now I want to Restore and Recover the same database on different instance on Same Host.
Could u suggest any document or Steps to achieve this task.....
Thanks,
Mouni.

No Problem.
Please check this :
http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmdupdb.htm#BRADV420
ORACLE-BASE - Duplicate a Database Using RMAN in Oracle Database 11g Release 2
Ensure you follow what Mr. Hemant has mentioned.
Regards
Karan

Dataguard in the same host

I am creating a Oracle 10g dataguard configuration within the same linux host. since DB_NAME parameter should be the same and DB_UNIQUE_NAME parameter should be different for both Primary and Standby databases, I am configuring the following things.
Primary
DB_NAME = ABC
DB_UNIQUE_NAME = ABC
INSTANCE_NAME = ABC
when connecting to primary database,
export ORACLE_SID = ABC
In Standby,
DB_NAME = ABC
DB_UNIQUE_NAME = XYZ
INSTANCE_NAME = XYZ
when connecting to standby database,
export ORACLE_SID = XYZ
Is this correct ? will this work for configuration within a single host ? or is there any problem with the above parameters ?
Oracle documentation tells about configuring dataguard in two hosts. But not within a single host.

Is this correct ? will this work for configuration within a single host ? or is there any problem with the above parameters ?
yes its correct there is no different steps for DG implementation within the same node or diffrent node,excpet in 9i there you have to specify lock_name_space parameter when you want to open a copy database with the same DB_NAME on the same machine as the source database.
but in 10g new DB_UNIQUE_NAME attribute is introduced to clearly identify the relationship between a primary and standby databases.
Khurram

Stored credentials in differerent RDP files to the same host

hello,
i use several different accounts on my win7 machines, each for different purposes. and i want to rdp into these machines using different accounts, but when i attempt to create the RDP connection files (one for each host & account), the credentials
of only the LAST saved account are used - individual credentials don't seem to be maintained.
any help would be appreciated, thank you

Hi,
Have you tried to save your individual connections as different Remote Desktop protocol (.rdp) files?
An .rdp file contains all of the information for a connection to a terminal server, including the Options settings that were configured when the file was saved. You
can customize any number of .rdp files, including files for connecting to the same server with different settings.
Also, you could refer to the following article:
Saving your logon credentials in Remote
Desktop Connection
Alex
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Should the owb severside components be installed on the same host as DB be?

Hi, all. I have installed the Oracle9i Database on a linux machine. If I wanna to use OWB to build warehouse, should I install the owb server-side components on the same machine as where Oracle9i Database locates on? Thanks

thanks, Gilles Pol
The owb has been setup on the linux host
thank you very much

Multiple Apache-Weblogic plug-in configurations for the same host

          Hi BEA,
          I have a situation where I have more than one weblogic server/cluster both using
          the same Apache to proxy. Reading the Apache plug-in configuration I gather that
          below should work. In Apache (httpd.conf):
          <Location /path1>
          SetHandler weblogic-handler
          WeblogicHost app1
          WeblogicPort 7001
          </Location>
          <Location /path2>
          SetHandler weblogic-handler
          WeblogicHost app2
          WeblogicPort 7001
          </Location>
          In this case the later Location of the two works fine and the other seems like
          it is just not there. (If the two are switched the other works fine...) The thing
          is that, if possible, I would like to avoid splitting the two locations onto two
          different VirtualHosts (which works).
          Does anyone have any ideas on how to solve this and still avoid the use of multiple
          VirtualHost-definitions?
          Is it due to a limitation in Apache module architecture that the configuration
          above does not work or is it a design choice in the plug-in?
          //GG


          Gunnar,
          I would post this Apache proxy plug in question to the
          weblogic.developer.interest.plug-in forum
          Chuck Nelson
          DRE
          BEA Technical Support

Multiple machines with the same host name

Has anyone tried it? Is it supported? We have this policy around here that all db servers are called db2 with different domain names. When I tested it, one host registered with GC properly although without domain name (ie db2 only), but agents on the remaining db2 hosts keep dying and never show up in GC. I'm gonna play with it some more, just wanted to ask if anyone has heard of such problem ...
Thanks,
Julius

Actually, if you see the emd.properties file in the $AGENT_HOME/sysman/config directory, you should be able to specify fully qualified host name (e.g. db2.domainname) in the agent url.
If the agent has secure communication setup with OMS, then you will have to re-secure the agent after changing agent url in emd.properties.
Hope this helps.

Error while creating Auxiliary database through RMAN on the same host.

I got the following error while cloning a stand by database through RMAN.
I got the following error while cloning a stand by database through RMAN.
[oracle@localhost admin]$ rman auxiliary sys/clonedb@clonedb
Recovery Manager: Release 11.1.0.6.0 - Production on Mon Sep 19 10:51:48 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04006: error from auxiliary database: ORA-12154: TNS:could not resolve the connect identifier specified
My LISTENER looks like this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
TNS Names:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
CLONEDB=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CLONEDB)
And SQLNet.ora
NAMES.DIRECTORY_PATH= (TNSNAMES,HOSTNAME, EZCONNECT)
Any help would be highly appreciated.
Thanks,
-Revku.

Hello,
I think there is something wrong with the ")" in the listener.ora : the second SID_DESC is not part of the SID_LIST.
Instead of
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
)It should be :
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = ora11g)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
(SID_NAME = CLONEDB)
)Hope it will help.
Regards,
Sylvie

2 mta in the same host

Similar Messages

Maybe you are looking for