2 new Asus AH236H monitors. How to ?

I have two ASUS AH236H monitors. I have a new MacMini Funning 10.8.3.
Main monitor is on MacMini HDMI to HDMI.
Second monitor is is MacMini Thunderbolt to HDMI.
I want to have main one in Landscape mode and the second monitor in Vertical Portrait mode. But when I select it, and then apply the 90° option, they both are in Verticle mode.
How can I get them to be independent.

The module name is asus-acpi
To load it enter (as root)
modprobe asus-acpi
If you get no output the module was loaded.
To check use the lsmod command
lsmod | grep asus
If you get an output it is really loaded
To load it automatically at startup add asus-acpi to the
MODULES line in /etc/rc.conf
Nice How-To : http://m6n.ath.cx/forum/viewtopic.php?t=208
It is for the Asus M6, but it uses asus-acpi, too.

Similar Messages

I have a new flat screen monitor; how do I get iMovie project screen to fit the monitor screen ?

When I want to work on my iMovie project, the work area is to wide for the monitor. I have toggled the monitor between wide 1/2 and original screen 2/2; I still need to physically pull the picture right and left to see the work area not shown.

I don't know how to delete a question .... When I opened iTunes it prompted me to change the resolution on the monitor... that seemed to fix my " fit to screen issues ". If you are reading this Thank you for your interest in my problem.

HDCP error with new HDCP compliant monitor

I just bought a new Asus VE228H monitor. I have a ATI Radeon HD 4200, HDCP compliant video card and I am running Windows 7 and iTunes 12.1.1.4. Even though the new monitor is HDCP compliant, I still get an HDCP error in iTunes. I replaced the cable with a new HDMI cable and I still get the error. I have tried searching online for a solution, but haven't found a solution. Thanks in advance for your help.

SUCCESS ....... for now ......!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have now got my atv2 unit to power back on - and we can play the rented SD movie which is playing now to a happy family....
No HDCP error message appeared this time.
This what we did to fix our issues....
1) Pressed the HDMI cable more firmly into the HDMI port into TV - this allowed the ATV2 to actually show/reappear onto the tv panel.
2) Plugged both power leads for TV and ATV DIRECTLY into wall. (Previously, we had both AC leads plugged into a 4x multi power board and had this plugged into the wall.
We started the SD movie and no HDCP error appeared and movie is still playing as i type...
Now, to repeat this error/diagnostic, we then plugged the TV power lead back into the 4 x multi power board and plugged the board back into the wall. Immediately, the dreaded HDCP error re-appeared. We then replugged TV back into wall directly and no HDCP error message.
Hypothesis #1 :
Now, this 4 x multi power board also had our DVD player and stereo connected to it. Perhaps our DVD (potential recording device) was being detected and hence the HDCP barrier came up so that we were not able to record this movie.... just a hunch but sounds plausible.....
Hypothesis #2 :
Also, this 4 x multi power board was within immediate vacinity of the ATV2 unit. Possible interference.....
When the 'dust' settles and the family finishes watching the movies, (1 x HD , 1 x SD), i will plug the 4 x multi power board into another AC wall socket way out of the way of the ATV2 unit (around 4m) and try to repeat this error to validate my hypotheses - noted above.
I will report findings later in around 6 hours...
thanks for your help people...

Can anyone help me solve the problem of text displaying very rough on my new ASUS PA279Q display monitor running off my MacBook Pro?

This is regarding a brand new ASUS PA 279Q, 2560 x 1440 IPS monitor. I'm connected via mini display port (into thunderbolt port on MacBook Pro) to display port on ASUS monitor; using cable ASUS included with the monitor. Mid 2012 MacBook Pro…full specs at bottom of this post.
I have resolution set at 2560 x 1440 which is the native resolution according to the ASUS spec. I tried the other resolutions available in my System Preferences and text displayed rough with those settings too. I've tried adjusting contrast, brightness and sharpness via the ASUS control panel and didn't solve the problem. Also tried calibrating via Mac's system preferences/display and that did not improve text display either. All the text on this monitor (no matter what software I launch, Finder, InDesign, Illustrator, MS Word, Excel, VMWare Windows XP, Windows versions of Word, Excel, Acrobat, etc, all are consistently rendering text the same way --- ROUGH and with "HALOS" around each letter.
All point sizes of text and at various scales, display very rough on the screen. (My comparison is the retina display of my MBP and a Thunderbolt…so those two displays are my expectations.) I'm using the same MBP for both a Thunderbolt display (at work) and this ASUS at my home office.
On the ASUS it's not as noticeable when the text is on white backgrounds, but I'm a graphic designer and compose images with text all day everyday. Not to mention the specs on this ASUS PA279Q indicate it's built for the professional so I would expect better text rendering. I haven't even addressed color calibration and balance yet, because that won't matter to me if the text won't display any better than it is now.
I was so hopeful after researching all the specs on this monitor it would be a viable alternative to the glossy display of the Thunderbolt display. (Which, I do love the Thunderbolt display for it's clarity and how it displays crisp, clean text at all sizes. (This ASUS actually displays text decently if I increase the text so each letter is about 4" high. Which is pointless for practical purposes -- that'd be like doing page layout through a microscope!)
I kept holding off on getting a monitor for the home office thinking the Thunderbolt would be updated soon. I'd be sick if I dropped a grand on piece of 2011 technology only to learn a few days later an updated Thunderbolt display hit the market! Not to mention, I'm praying Apple comes out with a less reflective Thunderbolt display. The glare and reflection is the main reason I looked elsewhere for a large monitor; hence my asking for help. Hoping the ASUS text display issue can be worked out. My expectation is for it to display like the MBP retina and Thunderbolt display text. That possible?
Alternatively, I guess I could do the Apple Refurb Thunderbolt at $799. And see if there's a decent aftermarket anti-glare I could stick on it?
Thanks for reading my post. Hope someone can help; offer any suggestions? Words or wisdom?
Has anyone else had similar issues and figured out a resolution? Help!
MacBook Pro
Retina, Mid 2012, 2.3 Ghz Intel i7
8GB 1600 MHz DDR3
OS X 10.8.5
NVIDIA GeForce GT 650M 1024 MB
ASUS PA279Q

I uninstalled those two items. It still runs slow on start-up and when opening safari, firefox, iphoto, itunes, etc. It's not snappy like it used to be. Any other ideas? Thanks.

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

Im not very tech savvy. I use firefox on my desktop, and want to run on my new Asus netbook with Windows Starter. Will FF run faster then IE? What version of FF should I install?

Im not very tech savvy. I use firefox on my desktop, and want to run on my new Asus netbook with Windows Starter. Will FF run faster then IE? What version of FF should I install? in English
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; MAAU)

Im not very tech savvy. I use firefox on my desktop, and want to run on my new Asus netbook with Windows Starter. Will FF run faster then IE? What version of FF should I install? in English
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; MAAU)

New ASUS router setup not connected dns issues

I purchased a new Asus RT-AC53U router (not so new with Asus) after some recent storms in the area seemed to kill my old Mynet N600 one. All videos, and ads tout how simple the setup should be. After doing all the directions given multiple times, (resetting, re-booting, PC, MAC, wireless) I'm still getting no internet connection .... tried direct connection to PC and to Mac, same result... "Disconnected", and ddns "go" just put me back in the loop of powering off modem, etc.. It may be something simple I am missing,... since I'm not savvy in this arena... only the second router I've ever installed ever... years ago, Help! "Leeky"

What are you using for a modem (make/model)?

Source Monitor - How Toggle Audio/Video Split?

I am new to Premiere and have inadvertently set the source monitor (or my clip or my sequence) so that the audio and video tracks can be manipulated separately in the source monitor:
How can this be toggled on and off? That is, how do I go back to manipulating the audio and video tracks together rather than independently of each other?
(In my clip the audio and video tracks have not been unlinked.)
Thanks!
Steve

Thanks - I must have somehow done a "Mark Split" and set an audio or video in or out point.
However, when I right-click the options "Clear In", "Clear Out" and "Clear In and Out" are disabled.

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334)

I have iTunes on my iPad. I have a new iPod nano. How do I connect iPod to iPad to download iTunes and music library?

I have iTunes on my iPad. I have a new iPod nano. How do I connect iPod to iPad to download iTunes and music library?

Hi Divine Inspiration,
You wouldn't connect the iPod to the iPad for data transfers. Music is stored and shared either through a computer or iCloud.
This article gives an overview of moving music and data off the iPad.
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/ht1209
and this article explains syncing to the iPod.
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

I just got a new macbook pro. How do I get the 900 songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

I just got a new macbook pro. How do I get the 900+ songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

I have an old ipod, mac formatted, and want to transfer all my music, some of which is not itunes, to my new mac computer. How can I do that?

I have an old ipod, formatted on an apple laptop, and want to transfer all my music, most of which is not itunes, to my new apple computer. How can I do this?

Use a third party program such as this one: http://www.fadingred.com/senuti/
B-rock

2 new Asus AH236H monitors. How to ?

Similar Messages

Maybe you are looking for