2 nodes RAC with Oracle 10g on Windows 2000 server
Hi at all. I want to manage a cluster having 2 nodes on windows 2000 server each of them with Oracle 10g. I have VMWare 5.0. Someone can suggest me a detailed tutorial how to start and built it? Thank you very much for your answers.
Saverio Sergio Mola
the cookbooks here:
http://www.oracle.com/technology/tech/linux/vmware/cookbook/index.html
will explain how to install.. however the VMware Workstation product doesn't offer in a supportedway the sharing of two nodes of disks.. there are hacks out there, but they are not very stable. We therefor chose to install two instances on one node to showcase RAC, rather than make it complicated and unstable to use and showcase.
there are also ready made VM's from above page, so u can quickly evaluate it for both Red HAt and SuSE.. when vmware can support such sharing in an easy supported way we might re-evaluate.. until then my personal suggestion is to stick to simple case.. 2 instances on one node.. its easier to copy, snapshot.. etc.
Enjoy..
Saar.
Similar Messages
-
Installation of oracle 10g by window 2000 Server or Window XP professional
Dear all
Did you tried installatin of oracle 10g in Window 2000 Server and/or Window XP professional
installation on which one will be more reliable and stable?
As I am choosing which OS will be better as a Server
please help
Francis SZEI don't think XP professional would be recommended as server.
would be better if you use 2000 Server or best if you use 2003 if you like windows environment
cheers -
Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server
Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animeshactualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus -
Installing oracle 10g on windows 2000 server
hi masters,
this might look very silly question, and every child might know answer, but i would like to ask this question here that
i have oracle 9i release 2 installed on my windows server 2000 and an application is already running, now i want to install oracle 10g on same machine...
but when i try to launch oracle universal installer, it fails to launch it....whay is this so??? do i need to adjust some parameters to install it????
can anyone provide a checklist to check??i have an antivirus installed on machine...
any suggestion will be appreciable
thanks and regards
VDgot my answer, you can follow this step.
on windows 2000 server while launching oracle universal installer, due to jre bug (noted in metalink 266617.1 doc and 393070.1) installer CMD prompt launch and disapper in a while... so run following command on command prompt
to resolve the issue.. change directory path according to your directory structure.
change directory to your oracle installation setup.exe directory and execute following command
C:\>\backup\SoftwareBackup\Database10g\database\install\oui.exe -J-Dsun.java2d.noddraw=truethanks and regards
VD
Edited by: vikrant dixit on Apr 21, 2009 4:47 AM
Edited by: vikrant dixit on Apr 21, 2009 4:48 AM
Edited by: vikrant dixit on Apr 21, 2009 4:50 AM -
Developer 6i Installation with Oracle 8i on Windows 2000 Server
Hi Folks,
We are using Oracle 8i (8.1.7) with Developer 6i for the past 2-3 years. Oracle 8i is installed on Windows 2000 Server and the client machines have Developer 6i installed. Using the Net 8 Easy Configuration Utility, the clients and the server are linked perfectly and we have never experienced any major issue regarding the connectivity from the clientâs sides.
Now my question is that, is there any possibility that we can also install Developer 6i on the server, âcause we have tried this several times and every time after installing Developer 6i on the server, the Net 8 Easy Configuration Utility does not invokes and obviously we are unable to use any of the Developer 6i products and moreover after installing Developer the already installed 8i Database does not gets mounted and we are also unable to use the database.
Are we missing some basic stuff here or do we need to run some patch for Windows 2000 Server?
Another thing, all our forms and reports are residing on clientâs hard disks; can we also have the option that the forms and reports should also reside on the server so that we can easily update our forms and reports definitions from the server side?
TIA
HassanHi,
Yeah, I installed both the products i.e, database and developer in separate directories.
Hassan -
Install Oracle 10g on Windows 2000 server
hello
I have installed Oracle 10.1.0.2 on my server ( Windows 2000 server). The procedure of installation goes suitably but during the creation of the base it posts me:
instance Created
Dim-00019: Error of creation of service
O/S-error OS1387) Impossible to add or remove a member of the local group because this member does not exist
then, I look that the service OracleDBConsole of Enterprise Manager is not created
knowing only SqlPlus goes well.
after the installation, I want to add the console Enterprise Manager while using EMCA then it display this error:
Failure of the configuration Enterprise Manager because: Job_queue_processes must be equal to or higher than 1
help Me PLEASEFirst problem: Check the user , which does the installation,
it must be a Local Administrator in order to install Oracle products on a
Windows NT/2000 Server (machine not part of a domain) or it must be a Domain Administrator to install Oracle products on a Domain Controller (PDC or BDC) (machine part of a domain).
Another known issue for this problem is a non-english Windows version,in this case the software should reloaded from OTN, which has a fix.
Second problem: You cannot run emca, BEFORE you have a running database, DBConsole depends on it.
Werner -
Installing SAP IDES 4.6c with Oracle DB under Windows 2000 server
Hi everyone.
As many people, i would like to learn MM module and the only way is installing SAP IDES on my computer.
I have a SAP IDES 4.6 with oracle DB and i want to install under w2k server.
Is there any weblog explaining how to install it?
If there anyone has a guide, i will very pleased to receive it. My email is [email protected]
Regards.hi inigo,
please let me know if u find out i am also trying to instal ides 4.6c -
Install Oracle 10g on Windows 2003 Server cluster (MSCS)
Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now. -
What i need to have to run oracle 10g on win 2000 server.
hi,
I want to install oracle 10g on win 2000 server,what should I need to do to install oracle 10g.
thanks Alok kumarHi...
Try check http://tahiti.oracle.com
There are complete documentation and also installation guide for Windows where pre-requisites are included. -
Oracle 10g on Windows 2008 Server Std. edition
Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh BansalWith due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner -
Install Oracle 10g on windows 2008 Server 64bit
Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11gYou mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20 -
Error in Oracle 10g Installation windows 2000 advance server
Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafiSolution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again. -
Problem Installing Oracle 10g on Windows 2000
Hi all,
I´m trying to install the Oracle 10.2.0.1 on Windows 2000 Terminal, but
I´m getting the following error:
java.util.zip.ZipException: oversubscribed literal/length tree
at java.util.zip.InflaterInputStream.read(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)Somebody know about this?
A important information: Other person have tried to install the Oracle9i, but he've cancelled the operation.
So, I've cleared Oracle information from regedit, but the key LEGACY_ORACLEMTSRECOVERYSERVICE
I cannot make clear. I don't know if this can influence in installation
thanks!!!!Hi all,
Thank u for help me. Very good, but now I got other error :-(
Error file:
java.util.zip.ZipException: invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)
at java.util.zip.ZipInputStream.readEnd(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1387)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1278)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1237)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1192)
at oracle.sysman.oii.oiix.OiixFileOps.copyStreamFromJar(OiixFileOps.java:1123)
Log file:
INFO: Exception thrown from action: copyGroupFromJar
Exception Name: IOException2
Exception String: Error in writing to file 'C:\oracle\product\10.2.0\db_1\jlib\oemlt-10_1_0.jar'. [invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)]
Exception Severity: 2I'm looking for this error, I found several solutions, but :-(
thank u so much again!!!!
[]s -
Hi problem with Oracle 10g On windows 2003 SR1
Hi,
I am installing NW2004S on windows 2003 SR1 (Std.Edition). After the installation of Oracle 10g I am getting the error "I*SQLPlus service" can't be started. Any help on this regard is greatly appreciated.
Regards,
Rao.MThe help I can give you is to suggest you to post in the appropriate forums:
SAP on Microsoft Windows
You will have more chance to get right responses.
Regards,
Sandro -
Install oracle 10g on windows 2003 server issues
I am very new to oracle
I installed oracle 10g release 2 Enterprise Edition on a Win 2003 Server.
I got all oracle services running after install
But I can not connect to the database from another machine which is on the same domain
I set USE_SHARED_SOCKET =TRUE under HKEY_LOCAL_MACHINE/Software/Oracle/HOME
(as I learned from the forum)
I turned off windows firewall (or with the firewall turned on add port 1521 to Exceptions list) .
I restarted listener serivces and I even reboot the machine Still I can not connect to the database from another machine.
What am doing wrong here?
We are on a tight schedule now any help will be very appriciated.Firewall-related problems normally throw ORA-12535, not ORA-12170 (the message a timeout occurred is the same). Description for this error is:
Error: ORA-12170 (ORA-12170)
Text: TNS:Connect timeout occurred
Cause: The server shut down because connection establishment with a
client failed to complete within the allotted time interval. This
may be a result of network/system delays; or this may indicate
that a malicious client is trying to cause a Denial of Service
attack on the server.
Action: If the error occurred because of a slow network/system,
reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
sqlnet.ora to a larger value. If a malicious client is suspected,
use the address in sqlnet.log to identify the source and restrict
access. Note that logged addresses may not be reliable as they can
be forged (e.g. in TCP/IP).
Hostname in listener.ora has a domain included, while in tnsnames.ora has not. Y Can you ping the host? Does tnsping work? To get more detailed informations you may turn on tracing on the client side (in sqlnet.ora) and the server sid (in listener.ora).
Werner
Maybe you are looking for
-
Windows Vista Wi-Fi sofware erased.
I believe I have erased my software for my Wi-Fi Drive. How can i get it back without my disk. Tried to restore no restore point. Is there a way for you to scan my computer over the internet? If so could you? I am currently using a Belkin external an
-
Aironet 350 Wireless Bridge Problem
I have inherited a wireless link between two building that used a pair of Aironet 350 wireless bridges. I say used because one took a lightning strike and is fried. I need to see the configuration on the remaining bridge to set up the new bridge bu
-
IFS-68610 with Invalid Addresses when Adding member to a workspace
Hi everybody, I created an OID username and OCS username with a different email using the OESUCR command line(ex: account: flastname and email: [email protected]). The new user can send and receive email to and from outside and also is part of a list
-
How do I pop-up a media player modal view in iPhone app?
Hi, I would love to know how the mail app in the iphone pops up a media player modal view when you click on an audio attachment in an email. The media player view slides up, plays the file, then slides away, giving control back to the mail app. Does
-
Mime objects in BSP application
Hi all, We have a BSP application with mime objects (images). We have assigned a default user to the application node in SICF. But when we test the BSP page in the browser, it still prompts for the userid/password, for the images. How to set the use