2 NXT radio remote control

Hello everyone: smileyhappy:, that I already have been trying for more than six hours to create a kind of car remote control (transmitter as remote NXT and NXT receiver as car) finally you comrpis, I am forced to do everything in labview which leads me to you, I now had no difficulty with the program on the remote, but I am trying to go crazy for the receiver program, my state machine I have the impression that Obie it me not, I'm avaialble 16H/24 if someone can help me it will be just fantastic: smileywink:,
I put at your disposal my diagram 2 and diagram transmitter receptors
Solved!
Go to Solution.
Attachments:
Esclave NXT.vi ‏16 KB
Esclave.vi ‏10 KB
Télécommande.vi ‏11 KB

Sorry, I don't have the NXT toolkit, but just looking at your code for 10 seconds, you have two different version of the state enum that are not really compatible (look for the red coecion to at the left shift register).
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • New In-Ear with Radio Remote Controll compatible?

    Hi.
    Does some one knows if this works?
    Ipod Video -> Radio Remote Controll -> New In-Ear Headphones.
    Thanks!

    They will give you audio. But the remote and mic will not work.
    The new in - ear headphones only will give you remote and mic capabilities with a 4th gen nano (tall screen), ipod classic (120 gb) or 2nd gen ipod touch (volume rocker)

  • Is the Touch compatible with the old radio/remote control?

    I was wondering if anyone knew if the new Touch was compatible with the clip-on FM radio/remote control
    http://www.superwarehouse.com/AppleiPod_Radio_Remote/MA070GA/p/729855
    (it plugs into the dock connector) I would like to be able to control my iPod without taking it out of my pocket. Thanks in advance!

    boooooo...!
    well, i'm a little disappointed. at least they added the Home Button doubletap feature. I guess I'll just memorize the button layout i've been using a touch-sensitive 3G iPod for 3 years+, so i'm not a stranger to that kind of thing
    and wait for a third-party solution
    thanks for your help
    Message was edited by: Alexander Chan1

  • Radio remote control

    The classic concept of an audio installation is replaced by a new one.
    Content is more important as is easy access to that content.
    There are various solutions from consumer electronic companies.
    Increasingly HDD are used to store the content.
    I would like to store the content in one place in the house and connect to an audio system or systems via a docking station.
    And distribute via wifi or wires.
    The iPod is an interesting possibility to store the content and get easy access.
    But I would need a remote control that is radio based and not infra red; and that works throughout the house to make may selection for content.
    Is there anything like that? Or is there anything like that foreseen in the near future?
    Thanks

    Hi
    Is this the one you are looking for
    http://www.apple.com/au/airportexpress/

  • New in-ear headphone NOT COMPATIBLE with RADIO remote!!!

    I bought some days ago on the apple store the new in-ear headphone but it seems that are not compatible with radio remote control.
    Infact if I connect them, the volume is very very very low. The volume is correct only if I take out just a bit the jack from the radio remote or if the central button of the "in-ear headphone" is hold down pressed.
    Do you know something about this problem? Because these headphones are NOT very cheap and nothing is indicated on the apple store.
    Thanks!!!
    lelea74

    According to the description, it is supposed to work as normal earbuds when connected to older iPod models. So it seems like it should work that way with a Radio Remote. You said it works properly if it is not pushed in all the way? Maybe the one you have has a minor defect. If you bought it online, you may want to call the customer service number at shown at the upper left corner of the online Apple Store web page and see what they can do about it.

  • Zen Touch optional wired remote control to play FM radio how do I get it? or can it work without

    One of the reasons why i am thinking of buying a zen touch is becuase it has a FM radio built in. From the website it says you need an optional wired remote control to listen to the radio, where can i get one in the uk? or can it work without it's

    The Zen Touch doesn't have a radio built-in. You'd need this:
    http://uk.europe.creative.com/shop/category.asp?cate=5
    The Zen Micro does have an FM tuner built-in.

  • Problems with remote control and user accounts - error 1759?

    We're running:
    -XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
    -We are NOT running Middle Tier.
    -Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
    -Zen server is also SP1 IR3a.
    We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
    We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
    I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
    Thanks in advance.

    > 4.91 SP2 Netware client.
    You could try this TID:
    "A user will no longer have an entry in their "Network Address" attribute
    even though they are logged into the eDirectory Tree."
    http://www.novell.com/support/viewCo...1262&sliceId=1
    "Resolution"
    "This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
    will check the monitor connection on a reconnect and if it is not connected
    close the connection and try and get a new monitor connection to the tree.
    Prior to the 4.91 SP3 client, the solution is to have the user login again
    so that it issues the NDS Finish Login request again that will populate
    Network Address again."
    Regards
    Rolf Lidvall
    Swedish Radio (Ltd)

  • Remote control and MSI PC-DTV Mega Sky 580

    Hello,
    I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
    I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
    I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
    Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
    Microsoft XP SP2 with current updates.
    2x300GB
    1GB ram
    Intel D820
    Onboard graphics and sound
    Dust and dog hair arranged attractively around the box!

    Hi,
    Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
    So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
    It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
    I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
    They all work fine but I would prefer a complete set 
    I

  • Problems in compatibility of iPod radio remote with iPod classic 160 GB

    Hi all,
    I have just bought a iPod classic 160 GB and want to buy a iPod radio remote as well. However, after I have done my research, I find the radio remote is not compatible with iPod classic perfectly…
    Do you think it is a good idea for me to wait a new radio remote (maybe) or later Apple will release update?
    Thanks

    I use my Radio Remote with a Classic; it does everything that it had with my 5G-Video EXCEPT it will not allow me to set radio stations, either with the Radio Remote's control or the iPod's control.
    I have spoken with an iPod specialist (Apple Care) and according to him Apple has acknowleged less than 100% compatibility/functionality with the Radio Remote and the Classics. One of the reasons, he stated, was that several 5G-Video iPods were "getting fried" when the Remote was not fully connected to the docking-port. So Apple has decided to reengineer the port [for better a connection, I gather]. What puzzles me the most about the new generation of iPods is why they were rolled out without warning customers that their Car-Charger, Video Player, dock, AV Cable, or APPLE'S OWN Remote will not play nice with each other!
    This go around, it's find out the hard way.

  • MEGA 180 remote control LINUX support

    I'm trying to set the MEGA 180 up as a home entertainment system with Freevo on Debian (Linux).
    The system now boots from network, and sound/video/tv-out works perfectly.
    I've not managed to use the LCD, radio and remote control yet.
    (Or the card reader, but that should not be a problem).
    The radio and LCD I can live without, but the remote control was what got me to buy the system in the first place.  Does anyone know how to make it work with linux?
    If someone could supply me with specs for the hardware, I should be able to write a driver myself, but so far, I've had no luck finding the info I need.
    (I didn't expect the onboard IR reciever to work, so I had build a serial IR reciever... but when I got the PC... no serial port )
    Any help would be greatly appreciated.

    These are the only links I have got that might be of interest.
    http://www.siliconmotion.com.tw/bluebirdvl.htm
    http://lirc.sourceforge.net/remotes/msi/
    not a lot of help I know but I light a candle every so often

  • Bluetooth Remote Control Quit Working

    I have a new 8350i and downloaded the new 5.0.0.807 (?) version software. For some reason, after doing this, the ability of my Plantronics Voyager 815 headset to perform remote controls (answer, hang up, volume, etc) has quit working. Has anyone else had this happen to them? What can I do to correct this? Thanks in advance!
    Solved!
    Go to Solution.

    I thought I'd lost my mind with this phone.  I too updated my phone with the latest software and now I am having all kinds of bluetooth problems, I have the problem with the remote controls on my headset not working.  I have a problem where if I put the phone in the case while talking to someone it hangs up even though I have it set to NEVER do that.  The phone also is having major pairing issues with the two cars hands free radios I have, once the phone is paired to the radio, I can no longer listen to the car radio, I have to drive in silence, so I go back to the headset, which I cannot answer calls or hang up calls with.  I have pulled the battery, but that is only a temporary fix, it starts misbehaving within a day or two, tops.
    I used to love this phone, now I am nothing but frustrated with it.
    If anyone hears of a solution that works for more than a day, please post what you did.
    Thank You

  • Does anyone make a remote control for vixia hfr200 camcorder

    i am wanting to start a you tube channel but could really use a remote control zoom for cannon vixia hfr200 camcorder but so far have had no luck finding one. Do anyone know if someone makes one???

    Hi Radioperson,
    Welcome to Sony Community!
    You may refer to these links for your inquiry on a Sony portable radio:
    http://store.sony.com/cd-players-boomboxes/cat-27-catid-All-CD-Players-Boomboxes
    http://store.sony.com/clocks-radios/cat-27-catid-All-Clocks-Radios
    Thanks!
    - Chris

  • How do i get my ipod radio/remote replaced?

    I bought my ipod radio/remote back in October and its suddenly stopped working. It is detected by the ipod (classic) as it brings up the radio option on the menu and also the volume up and down controls still work. However none of the other controls work at all.
    Ive plugged it into my old ipod (video) that my girlfriend uses and it has exactly the same problem.
    According to my receipt from the apple store its guaranteed until October 08 so do i need to take it back to the store or can i just get another one directly to me by apple?

    You can either take it back to the Apple Store (make a Genius Bar appointment on your computer the day you decide to go: it is a little busy at all of them right now) or go here: http://www.apple.com/support/oss/

  • Navigation of iPhoto and iTunes not possible by Remote Control

    Navigation of iPhoto and iTunes not possible by Remote Control after upgrading from Leo to Mountain Lion. I miss this functionality because it was nice to see may photoes directly on the iMac-Screen as well to hear the Music on my Radio. No chance to implement this function again by a newer upgrade?

    Answer to captfred and mende1:
    I am using already AppleTV, but only for streaming into a different room on to my TV - it is great!
    But I like to hear all my iTunes Music by LineOut Cable from iMac to my Stereo Device.
    I can activate music titles in iTunes by Apple Remote, but only for jumping from Title to Title and not back to Albums or Playlists etc.

  • Question about the "iPod radio remote"

    I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
    Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
    And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
    What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
    What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
    And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
    Someone that has one can perhaps answer
    Cheers
    Ray

    I can at least answer some of the questions.
    The RDS function on this radio/remote is poor in the
    UK. You have to set the radio function on the iPod
    to "Europe" and when you do this RDS info is not
    displayed on almost all radio stations such as
    Virgin, XFM, Capital, GLR, etc. It does display on
    Radio 2 however. At least, this is my finding. So
    it's unpredictable at best. Setting the radio to
    "USA" on the iPod increases the likelihood of getting
    the RDS to display, but the downside is that you can
    then only tune the radio in increments of 2mhz which
    is a bit awkward if your looking for 89.1mhz!
    There are three settings for the radio which you
    choose via the iPod. They are USA/Europe/Japan. No
    setting for Canada, although I'm sure you will still
    be able to use it over there as I can still use mine
    here in the UK even if it's set to USA.
    No, there is no AM radio.
    You can plug headphones into the remote or the
    headphone jack on the iPod, or both at the same time.
    I'm not sure I understand your question about the
    bottom of the iPod. The radio plugs into the iPod
    via the dock connector.
    There is no 'line out' on the iPod. If you mean the
    one on the dock, then no you can't use it as you
    cannot place the iPod into the dock whilst the
    radio/remote is connected as they use the same
    connector.
    Yes the cable of the remote acts as the aerial.
    Reception is surprisingly good where I am, but it
    will of course depend on where you use it. I've
    used it indoors without any drop in signal or it
    dropping to mono.
    Lastly, you need to update the software for both the
    nano or the 5th generation for the radio to work
    (after you do this a radio function appears in the
    menu), and some users have found that doing this
    screws up the iPod. I have mine working on both the
    nano and the 5th gen without any problems.
    There is a review of the radio/remote here. I like
    mine and consider it a worthwhile accessory, but of
    course there will be those who disagree.
    iPod
    Radio/Remote Review.
    Thank you for the reply.
    Think your right USA or Europe will work in Canada.
    Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
    Based on your views I shall get one in March when in Toronto
    Cheers
    Ray

Maybe you are looking for