2 OAS on the same server

we have installed a OAS 10.1.3.0 on Linux. is it posble to install OAS 10.1.3.3 on the same server, is there any confliction?
if it posible, how can I change the port number for the 2nd OAS? or will it detect the port have been used and choose diffrent port? how do I install the 2nd one, should I install another OAS 10.1.3.0 and apply patch on it to upgrade to OAS 10.1.3.3?

Thank you for reply.
but I have 2 things need to be clearified:
1. what's the purpose of "use the apache from 10.1.3.0 and use it to create oc4j mountpoints for your 10.1.3.3 installation"
2. in cureent download ,the 10.1.3.3 is avalible as a patch, should I install the 2nd 10.1.3.0 and then do upgrading to 10.1.3.3?
thanks

Similar Messages

How can I migrate file shares & permissions from one volume to another on the same server?

I am replacing a storage array and as part of that process, I need to move files/folders and Shares/permissions from one Volume to another volume within the same server.
The server is Windows 2003 file server. The file transfers are not a problem, moving all 40 shares with permissions etc. is my main concern because in order to maintain everything I need to change the drive letter of the new volume to match the old
one so that links to various resources throughout the network do not break.

Hi,
If you want to copy files/folders from one Volume to another volume within the same server, you could use the File Server Migration Tool (FSMT) or Robocopy to accomplish your goals. The tool can move all of the files from the shares on your original volume
to the new volume.
For more detailed information, you could refer to the articles below:
File Server Migration Toolkit
http://technet.microsoft.com/en-us/magazine/2006.10.utilityspotlight.aspx
The File Server Migration Toolkit (FSMT) is a free download available at:
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
FSMT and Robocopy will not copy Share permissions but only NTFS permissions. So if the drive letter will not be changed, you can backup and restore the Share permission with steps here:
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Activating MS Office 2013 ProPlus via KMS running on the same server

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

Given: Microsoft Windows Server 2008 R2 Enterprise 64-bit, all the latest security updates applied.
KMS service set up and running, all the recommended updates applied (to handle possible activation issues for Windows 8 etc)
Microsoft Office 2013 Standard deployed on the server mentioned above and on workstations on intranet, volume licensing in effect (proper KMS key for activation of Microsoft Ofice 2013 has been entered).
Problem: I can't activate MS Office 2013 installation running on the same server where KMS service is being run.
There are no entries in KMS event log related to this failure.
Everything was restarted, reinstalled etc several times already (including installing 32-bit and 64-bit versions of the Office).
Output of slmgr.vbs /dlv 2E28138A-847F-42BC-9752-61B03FFF33CD:
Windows Script Host
Software licensing service version: 6.1.7601.17946
Name: Office 15, KMSHostVL edition
Description: Office 15, VOLUME_KMS channel
Activation ID: 2e28138a-847f-42bc-9752-61b03fff33cd
Application ID: 0ff1ce15-a989-xxxx-xxxx-xxxxxxxxxxxx
Extended PID: 55041-00206-234-486666-03-xxxx-xxxx.xxxx-xxxxxxx
Installation ID: 01683679734050124078134659xxxxxxxxxxxxxxxxxxxxxxxxxxx
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxxx
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/05/2015 10:00:12 AM
Key Management Service is enabled on this machine
Current count: 0
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 0
Failed requests received: 0
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 0
Requests with License Status Initial grace period: 0
Requests with License Status License expired or Hardware out of tolerance: 0
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 0
OK
Output of cscript ospp.vbs /dstatus
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
SKU ID: b13afb38-cd79-4ae5-xxxx-xxxxxxxxxxxx
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
LICENSE STATUS: ---OOB_GRACE---
ERROR CODE: 0x4004f00c
ERROR DESCRIPTION: Run the following: cscript ospp.vbs /ddescr:0x4004f00c
Last 5 characters of installed product key: GVGXT
DNS auto-discovery: KMS name not available
Activation Interval: 120 minutes
Renewal Interval: 10080 minutes
KMS host caching: Enabled
---Exiting-----------------------------

XI and R/3 Running on the same Server.

Hello Friends!
One year ago I've installed XI on a machine that already had a R/3 instance. Although there were different instances, one for SAP R/3 and one instance for the ABAP part of XI, I couldn't get to connect XI to the R/3, appartently XI searched for the instance through the IP address, ignoring the instance ID parameter.
Now I have again the same challenge, I have only one machine to run R/3 and XI.
Does anyone know if it is possible to do?

Hi Tadeo,
from ERP 2004 you can install XI on the same server.
Regards,
Udo

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

Can different cluster of SAP Business One installed on the same Server

Hi!
Can anyone tell me if B1 different cluster version installed and run on the same server. Example B1 2005A AND B1 2005B. If it can, could you please include the procedure how can it be done.
Thanks,
Jo Borlagdan

No, A and B have different patch cycles - so there would be conflicts in SBO-Common. Therefore it will not work.
You could try to workaround that with named instances of MSSQL, but installation & update would need additional care + workarounds.
The best way to combine 2 SAP Business One cluster "servers" but still on one hardware would be to use a tool like VMWare... - but such a configuration has not been released by SAP - i.e. if there's an issue that could be traced back to the VMWare system, SAP might not be (li?)able to fix it
Sorry,
Frank
Message was edited by: Frank Moebius
BTW: Please note that you need to think eventually about conflicts with MS licenses. SAP has an agreement with MS which ASFAIK covers the license for 1 VMWare Windows system on 1 Windows PC so that we can use WMWare for SAP Business One sandbox systems - after RAM upgrades () it works fine...

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

How to make Adobe acrobat feature to convert SAP Pages to PDF available for multiple users connected to the same server

We have installed Adobe Acrobat X Pro- English,Francais,Deutsch version 10.1.9 in our test environment and tried testing it for converting SAP pages into PDF with a few pilot users. In doing so we faced a challenge, where only one user at a time can use Adobe Acrobat PRO to convert SAP pages in to PDF.As long as the first user who is connected to Adobe Acrobat Pro via SAP isn’t logged off, other users connected to the same server are not being able to get the “Save As” dialog box to save the PDF in their preferred location.
This is a business requirement and we need an urgent solution for the same. Can anyone help us in telling us if this is possible and if yes the how to go about?

It's not something we deal with here, the LiveCycle products are a different world. Key points: Adobe LiveCycle is a range of products, some desktop, some server. LiveCycle PDF Generator is the one you should look at, it comes in 3 editions. License terms are by negotiation. Key management is via its Java API.

Multiple users connected to the same server

Hi there,
I was wondering if this scenario would be possible to be implemented on a Snow Leopard Server installed on Mac Mini 2.66:
- one iphone developer that needs to be remotely connected to the server to develop apps
- one project manager that will handle the project files and documentation. He will login to the server and upload/download files
- one app GUI designer that will login from time to time, to make the design in photoshop.
Can these 3 users be logged in the same time on the same server without any lag? Or this version of server will only support one user at a time?
Thank you!

Yes, you can do ssh and terminal connections, but I'm guessing that's not what you want here; I'm guessing you're headed over from X Windows or (more likely) Windows Terminal Services.
Google for Aqua Connect and related for the path that you're headed toward.
In general, Apple Mac OS X and Mac OS X Server runs one seat and one keyboard and one display per station, whether it's an Xserve server or a MacBook or whatever.

Can you run multiple APEX listeners for different instances on the same server

Please confirm that we can run multiple APEX listeners for different instances on the same server? Is it an xml setup configuration or do we need to do more??
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Yes.. Just exactly what I was looking for...
Thanks Jari!!
Thank You,
Tony Miller
SmartDog Services
Austin, TX

Multiple Apps on the same server

Hope you can help and point me in the right direction.
I am managing a CF internet based application built using CF
6.1 and which talks to a MS Access 2K dB. The app is running on a
MS Windows 2K Adv Server, IIS [with a SSL cert.] and CF 6.1 Std
Server.
I now need to run a second separate application on the same
server.
My questions are:
1. Is this possible?
2. If yes to 1 can anyone point me in the right direction as
to configuring IIS and CF to run the second application? This
second app will also require a SSL.
TIA, K

First off run as far and fast away from using Access for your
DB back end as possible. Access isn't meant for this kind of work.
Next, you'll need to setup a new virtual server (with its own
dedicated IP address) in IIS.
Configure your new server to its new web root and optionally
reconfigure your log files.
Create a new CSR with all the right information and send it
to your SSL creator. Pay for cert with them, and wait for it to
come back. Install new cert and optinally reconfigure the site to
force SSL where necessary.
Add any necessary data sources in the ColdFusion admin
If your root config stuff for CF was setup correctly
everything should just magically work (tm).

Problems with Sent mail and multiple accounts on the same server

I have 2 different email accounts that are on the same server. Regardless of the account from which I send the email, all of the sent messages end up in the same sent folder. Is there a way to force the sent messages to go into their correct Sent folder?

In the Finder, go to ~/Library/Mail/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see the names of the files and folders present at the root level of the Mail folder.
Before actually posting that information, you may edit it so that the file/folder names do not reveal any details you wish to keep private, e.g. you may replace any real username with "username" to hide your real email address if you wish; similarly, you may disguise any domain names you don't want to be revealed. Try to be consistent in how you disguise those details, though, as we may need to refer to them in subsequent posts.
Now, go to ~/Library/Mail/Mailboxes/. With that folder open, repeat the process to let me see the names of the files and folders it contains. Again, you may disguise any mailbox names you wish to keep private. Be careful to not alter any suffixes, though.
Finally, for the two accounts involved in the problem, locate the account folders within ~/Library/Mail/ -- their name begins with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. For each account folder, repeat the process to let me see the names of the files and folders it contains.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

Can I install two versions of NW in the same server?

I have BW installed in a server running on Netweaver 7.3. but I need to install Netweaver 7.02 to do some tests, is it possible to install this other version in the same server? or will there be conflicts after the installation of the second version?
Thanks in advance,
Luis.

HI,
sapinst detects existing instances, and makes sure that you dont use the same instance numbers => same tcp ip ports for diferent sap instances, wich would cause conflits.
so in the limit you can install any number os sap systems on the same host, given you have enought hardware resourses.
best regards,
Ricardo Caramona

I can't cap the number of active downloads (via persistent-connection-to-server cap) AND still be able to load pages hosted on the same server, *because*...?

I'm aware that, by setting "network.http.max-persistent-connections-per-server" (in about:config) to 1, I'm effectively preventing myself from being able to download a single file from a server AND load a page hosted on the same server simultaneously.
My question is, why can't Firefox tell the difference between a file download and loading a website?
The reason I ask is that I feel I should be able to create a download queue and have my browser download one file at a time (to minimize the impact downloads have on available bandwidth and my own downstream, while allowing me to set up a long chain of sequential downloads), YET still be able to browse websites hosted on the same server.
I do not want to use an add-on or a separate download manager to solve this problem. I think that's stupid. Firefox should be able to tell the difference between a request to load an html file and a request to download any other type of file.
After all, I can already configure Firefox's file handling behavior for each type separately (I have, for example, previously set PDF files to prompt me to "Save as...", in order to prevent exploits from triggering when I click on a link, by preventing Firefox from opening them in-browser).
There is no reason I shouldn't be able to do what I have said I would like to. I should not HAVE to limit the number of max server connections in order to ACHIEVE filling a simple download queue with a 1-file-at-a-time limit.

In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

2 OAS on the same server

Similar Messages

Maybe you are looking for