2 Packages that are missing

Hey everyone... I have recently discovered that I have 2 packages that I am unable to find.
I discovered them when I checked smsdpmon.log after checking my DP Configuration Status.
There are 2 package ID's listed at the correct time as the log, and I cannot find them anywhere.
They are not showing in content status, reporting, or anywhere else.
The worst part is that this is from back in July.
This is also on the DP located on the MP
DP Status error is "Failed to retrieve the package list on the DP, or the package list in content library doesn't match on in WMI.
Please help

Hi,
There might be times when the content library and the package list in WMI on a distribution point become mismatched and the status of the distribution point displays as Warning.
There are two possible solutions to resolve this mismatch: Delete the package from WMI or update the distribution point.
For more information, please review the link below:
Troubleshooting Content Mismatch Warnings on a Distribution Point in System Center 2012 Configuration Manager
http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • Is there a way to search for photographs that are missing?

    I have discovered that some shots that I thought had been imported from iphoto are in fact missing (when I go to open them there is a badge with the yield sign and an exclamation point in it)
    I don't think this is the end of the world as I have the original files in various places and can import them (I guess)
    but is there a way to search to find all the shots that are missing?
    right now I'm having to scroll through the whole database in the list format and I have a lot of shots. can't seem to figure out how to do a search for missing shots…
    m

    1. Create a smart album and in the drop down in the top right corner select file status
    2. Check mark the file status box and select 'Offline'
    Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
    To reconnect..
    1. Select the missing files.
    2. Go to File and scroll to Manage Referenced Files
    The dialog box will have one of the photos selected
    3. Select the drive and folder that contains the referenced file and select it
    4. Click 'Reconnect All'
    This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
    Narvon
    Message was edited by: Narvon

  • My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases.  none of my purchases are free i paid so how do a recover them?

    My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases.  none of my purchases are free i paid so how do a recover them?

    asuming you are talking about the app store try signing into your account using your apple id into the app store.

  • I paid for songs that are missing from my list where are they?

    i paid for songs that are missing from my list where are they?

    Correct.
    Audiobooks have never been available for redownlaod and have never been listed among the content that can be redownloaded.
    As always, it is your responsibility to back up your content.

  • How do I download a few songs that are missing off my downloaded albums?

    How do I reload a few songs that are missing off my downloaded albums?

    i have same issues. updated all my ios on everything. downloaded a song on my phone and it tried to download on my computer but is grayed out and i cant play it and i cant redownload cause when i go to itunes it says i need to buy it again. wth apple get your updates and crap together. i also cant home share anything anymore

  • Is it dangerous to upgrade not all packages that are available...

    Is it dangerous to upgrade not all the packages that are available for upgrade?
    May it crash something which is not easy/possible to fix without reinstalling the whole system?

    Mr. Alex wrote:What if I haven't upgrade Arch for 2 years and after this time I upgrade only kernel. Can it cause any system damage/instability?
    If you are asking such questions Arch is most likely not the answer. And yes, user space programs might be too old for the new kernel or pacman might just not work in the first place due to other changes on our side.

  • How to report on machines that are missing an application?

    It seems to be a difficult task to report on PCs that are missing a specific exe or application. For example I ran a report and found 418 of 510 machines have the exe I am looking for. I manually merged the information on a page or 2 by printing both the device list and the list of machines with the exe. What I started to see is that some devices in the application report do not show up in the device report or in zcm for that matter and I am also finding some machines actually do have the update but do not show up on the application report. My comfort level in this reporting is not looking good seeing things not match up correctly.

    Originally Posted by mrhic
    I thought it hould be that simple but it kept returning a list of all applications in zen other than the one I was saying not = to. I will try again....
    Just to clarify what Andy said, the second report can reference the first report by using the criteria "Device" "not in report" "<first report name>". You don't need to export the first report and start merging stuff. There is a default report with ZCM 10.1.2 called "Reports --> Inventory Custom Reports --> Software Applications --> Workstations without antivirus software" which gives a good example of this.

  • Turn off this nag screen?? "Some text layers contain fonts that are missing"

    Hi all, I have recently been handed a web project from a mac user and everytime I open one of the pages I get the following message. "Some text layers contain fonts that are missing...etc" I have the same exact fonts but in the new open type format. Anyways apparently photoshop can't tell that. I would like to TURN OFF this nag screen. I am not even editing the text layer with the font.
    Is there anyway to turn off this nag screen? I turned off glyph protection in the prefrences and restarted photoshop to no avail.

    The missing fonts will be listed in grayed out color in the separate last section at the bottom of the font menu accessible from the text tool's property or the character panel
    The layers with missing fonts will have the warning sign on the layer's icon in the layer's panel however the missing font/s will be displayed with the correct font. When you try to edit the text on such layer, Photoshop will show a message with the missing font/s and will say that it will be converted if you edit it. If you choose OK, and you have different fonts on the same layer, watch which fonts will change appearance.

  • [svn:fx-trunk] 8417: Remove themes from the package that are not compiling cleanly

    Revision: 8417
    Author:   [email protected]
    Date:     2009-07-07 04:50:21 -0700 (Tue, 07 Jul 2009)
    Log Message:
    Remove themes from the package that are not compiling cleanly
    bug: https://bugs.adobe.com/jira/browse/SDK-21144
    qa: yes
    doc:
    checkintests: pass
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21144
    Modified Paths:
        flex/sdk/trunk/build.xml

  • Amazing the little things that are missed

    I admit, it's the little conveniences that I miss in 6.0.
    I miss being able to play a file before opening it.  Helpful when you have a mass of sound effects to choose from.  Leaves01, Leaves03, Leaves03.  (Yes, you can do that through right-click and spawning a player, but it was nice to have it native.)
    Am I just not seeing it or is there no longer a way to right-click and zoom to the tracks you want to see in multitrack?

    Hi Lighthope,
    The ability to preview files before opening them is available within the Media Browser panel, in addition to placing shortcuts to commonly accessed locations, searching within a folder, drag or insert directly into multitrack or CD sessions, and other functionality.  You can choose to manually play, auto-play on select, and loop playback.  This functionality has also been added to the Files panel.
    The Au3 style of preview in the OS Open Files dialog was very hacky and delicately implemeted on Windows XP, but Windows 7 and OS X no longer made this functionality possible.  Both OSs implemented methods to preview files from these dialogs without launching them.  It was our intent with the Media Browser to implement a better system of browsing your sound effects from within the application, where we would have control over the implementation and would not be constrained by OS support.
    As for your track zoom question, are you referring to the functionality where you right-click and drag on the vertical scroll bar in multitrack to zoom in?  This functionality has not been implemented in Audition CS, but a task in our feature backlog exists to revisit track zoom.  Currently  you can zoom into tracks using the mouse scroll-wheel, ALT = (zoom in), ALT - (zoom out) or by dragging the border between tracks.

  • How to save library symbols' class files in packages that are not the default package?

    Hi,
    I perform the following in Flash CS5 with Flash Builder 4
    1) Create a new library symbol.
    2) Do a RightClick->Properties on the new symbol
    3) Check the options for "Export for ActionScript" and "Export in frame 1".
    4) I write a new name for my class "Class1" and click on the pencil icon "edit class definition" to edit the class.
    At this point my FlashBuilder 4 takes over and opens the "New ActionScript" dialog.
    4) I then click on Package-Browse to select a package e.g. com.mycompany.myfiles as the new class destination.
    The as file is created as com.mycompany.myfiles/Class1.as as everything seems just fine.
    5) I close the ActionScript file and back in Flash CS5 I RightClick on the symbol and select "Edit Class".
    At this time, FB4 suggests again to create the file, ignoring the fact that I already created it before.
    Do you know of a way I can make Flash CS5 remember where I created the file?
    Thanks.

    Hi,
    I didn't remove the project or delete any of the files.
    All I did was create the class file under a package that is not the default package. Then when I clicked on the Flash symbol's "Edit Class" It asked me again to create the same class file.
    Only if I create the class in the default package, it won't ask me to recreate it again.
    Bye,
      RaamEE-IL

  • How to update SP2010 sites that are missing the Visual Upgrade options

    So, we are moving towards upgrading some SP 2010 sites that are currently using the old SP 2007 look and feel so that they have the new ribbon Visual Upgrade.
    For some reason, some of these sites do not have the Site Actions > Visual Upgrade option nor do they have the Site Actions > Site Settings > Visual Upgrade link.
    Does anyone know what can be done to make those available?
    Thank you.

    Even when I take a look at
    http://myfarm/sites/Support/dept1/_layouts/prjsetng.aspx?Source=http%3A%2F%2Fmyfarm%2Fsites%2FSupport%2Fdept1%2FPages%2Fdefault%2Easpx
    which is where the site actions > visual upgrade link should take the user, that page does not have the visual upgrade options on it.

  • How to Show All Packages, That are not required by any other package

    I need a way to see al the installed packages thar are not required by any other package
    Thanks in advance ...

    You probably want pacman -Qt or pacman -Qdt
    Check out man pacman.

  • Is there a way to remove packages that are installed as dependencies?

    Hi,
    I recently tried out GDM, and found that I don't like it. I now wish to remove it, along with all the dependencies that were installed along with it.
    However, I cannot find a way to list the dependencies of GDM, so that I can remove those as well.
    The pacman manual mentioned --cascade and --recursive , however cascade does not list anything else, and recursive includes WAY too many extra packages, many of which I actually need.
    Is there a way to remove the packages that were installed along with GDM, but nothing more and nothing less?
    Thanks,
    James

    magicalChicken wrote:Be very careful with -Rsc, as this could remove many very important packages it used inapropriatly, I would recommend just pacman -Rs gdm, then check for orphaned packages.
    +1
    I also remove packages with the -Rs switch.  I occasionally check for orphans.  In fact, I wrote an 'orphans' function in in my ~/.bashrc for this purpose.
    orphans() {
    if [[ ! -n $(pacman -Qdt) ]]; then
    echo no orphans to remove
    else
    sudo pacman -Rs $(pacman -Qdtq)
    fi

Maybe you are looking for