2 part question about insipre 6600.....please give some me some advice.

Ok my first question is:
I need to find a place to purchase the cables that go from the subwoofer to the PC sound card. It is a set of 3 cables, the ones that are color coded, green, black, and orange. I just went to hook up my speakers again and have realized that i am missing the those cables
2nd question.
I would also like to hook these speakers up to my laptop. My laptop is a Acer Inspire 5520-589. The Laptop does have a spdif out and i do beleive that the sound card supports dolby digital. So if i can get Digital sound from the laptop to the speakers somehow that would be great. If not, then no big deal.
If i can only get stereo sound from my laptop to the speakers that is fine also. But, what kind of adapter would i need. I would need to get the 3 3/8" jacks (green, black, orange) from the speakers to the single 3/8" headphone out jack of my laptop, that would be great to.
I was thinking that i could just use headphone splitters, but if i recall correctly some of the cables from the speakers are triple ringed as opposed to a double ring on a stereo headphone jack. I can't check the cables cause i need to find a place to purchase them (hence the 1st question).
Please some advice would be appreciated.

DeathGrind wrote:
Ok my first question is:
I need to find a place to purchase the cables that go from the subwoofer to the PC sound card. It is a set of 3 cables, the ones that are color coded, green, black, and orange. I just went to hook up my speakers again and have realized that i am missing the those cables
just google for it...they are lots of such cable. you basically need 2 stereo cable and triple ringed cable as you have mention in your post.
for the other qns...i suggest you go get a proper soundcard to match that 6.1 speaker instead.

Similar Messages

I have a Mac OS X 10.6.7 and Firefox 4. Other browser are easily connecting to the net but Firefox. It keep trying to connect to my wireless network but not doing the job. Please give some advice..

This happens when I first start the computer. Sometimes it connects to the wireless network, and during the day is fine.

user8744713 wrote:
I have downloaded Instant Client libraries (basic, SDK and SQL files, named instantclient-basic-10.2.0.4.0-macosx-x64.zip , instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip and instantclient-sqlplus-10.2.0.4.0-macosx-x64.zip ) to Mac OS X 10.6.2 server and unzipped them as instructed in the manual here: http://download.oracle.com/docs/cd/B19306_01/install.102/e12121/inst_task.htm#BABJGGJH
Manual then instructs to run runInstaller command. This command however is not being recognized by the system (' No such file or directory' error is thrown) which to my opinion means one of two things: either command is misspelled in the manual or the command file that runs it is missing. I tried it with or without a dot and slash and in small case letters, nothing works.
When I installed similar libraries on Linux I had no problems but all was required there was to place libraries in the proper directory, no command was required.
Maybe same can be done here as well but I am not sure where to place some of the files. I see .h files that should go to /usr/include but see no .so files that on Linux go to /usr/lib. There are some files with .dylib and other .*lib extensions but I'm not sure if they should be copied to /usr/lib or not. And then there are some other files I have no idea what to do with.
Please help!!!No, you can't just drop a few files into a directory and have a working installation (well, I guess technically you could. But technically you could bail all the water out of Lake Superior with a teacup ...)
Sounds like you've covered PATH and current directory issues. What about permissions? What OS account are you using for this installation? (you should have created an account called "oracle" and made it's primary group "dba"). Does that account have execute permissions?
>
Thanks in advance!
Edited by: user8744713 on Mar 26, 2010 10:17 AM

This is a two part question about the creative 16gb Zen?

8This is a two part question about the creative 6gb Zen? First of all, my battery life dropped very suddenly. One charge I was getting the full 30 hour battery life and the next it dropped to under ten. I tried using their tips on how to extend the battery life and I am still getting less than 0 hours of battery life. Why would it dropped more than half the amount between charges? I tried recharging it after it ran out and still the same thing. Any help?
Second, (I am adding this question because it might relate to the first in some way) my mp3 player has been behaving strangely lately. For example, some artists sometimes have letters removed or all but the first end up being removed. But, if you reset the player, the artists go back to the full name. Also, my player has been taking a little longer than usual to turn on. It takes about 30 seconds to turn on instead of the 5-0 that I'm used to. Does anyone know why this might be happening?
My Zen is only 4 months old, and I would be very upset it it's breaking already. Please, if you have any suggestions on how I can fix what's happening, post them. (Even if they?probably won't work, they're worth a try.)

< This is an unusual one; never heard of it before. All I can suggest is cleaning up and perhaps reflashing the firmware. If it still is doing this, then get the thing exchanged pronto.
My guess is that the problems are indeed closely related.

What is IMPORT/EXORT statements ?please give some example code?

What is IMPORT/EXORT statements ?please give some example code?

EXPORT :-To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
The EXPORT statement always completely overwrites the contents of any existing data cluster with the same name <key>.
IMPORT :-To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
they are used to save and reterive data in ABAP memory.
here is an example to clear about them.
REPORT ZWA_TEST2 .
data: it_bkpf type table of bkpf with header line.
SELECT * FROM bkpf into table it_bkpf.
EXPORT it_bkpf TO MEMORY ID 'MID'.
refresh it_bkpf.
IMPORT it_bkpf FROM MEMORY ID 'MID'.
LOOP AT It_bkpf.
write:/ it_bkpf-belnr.
ENDLOOP.
Reward points if it is useful.......

We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

Anyone any ideas to help please?

Please give some inputs for Sales order costing

please give some inputs for Sales order costing

Dear Chandu
If you use the valuated sales order stock, the actual cost of goods manufactured is updated to the sales order item (item in an inquiry, quotation, or sales order) under an inventory change cost element.
If you use the nonvaluated sales order stock, the actual cost of goods manufactured is updated to the sales document item under a settlement cost element or a source cost element.
Sales and administration costs are updated under a separate cost element.
Thanks
G. Lakshmipathi

Uk Mac user. Questions about internet connection please!

I own a Mac G4 800 Mhz tower.
At present connect to the internet via ethernet to router.
The past few days it has been running very slowly.
Checked the Netgear router page where it states the incoming strength is approx 4MB.
*+What can be done to help utillise the incoming speed please?+*
*+What do I need to make the G4 cable free please?+*
*+Is there a 3rd party version of the Airport card (if that is needed) please?+*
Any help and advice gratefully received!

What can be done to help utillise the incoming speed please?
That depends where the slowdown is. The quickest way to cut this problem down to size is to find an Interactive Internet Speed Test online, and run it.
If the measured speed (which is essentially download speed) is way too slow -- you need to complain to your ISP about it, and follow their suggestions.
If the measured speed is reasonable, but your perception is that it is too slow, post information about what situations, using what browsers, are the worst offenders, and readers will take a run at advising you.
I suggest you start a different thread with your inquiry about wireless equipment.

Hello Experts please give some suggestions in this code

Hello Experts . Please give suggestions in changing the below code to increase the performance . Thanks in advance for all your suggestions...
PARAMETERS : Pr_WERKS LIKE EKPO-WERKS OBLIGATORY,
 Pr_EINDT LIKE EKET-EINDT OBLIGATORY.
SELECT-OPTIONS : S_LIFNR FOR EKKO-LIFNR MATCHCODE
 OBJECT KRED OBLIGATORY.
DATA: BEGIN OF SELEC OCCURS 10,
 SIGN(1),
 OPTION(2),
 LOW LIKE p_eindt,
 HIGH LIKE p_eindt,
 END OF SELEC.
SELEC-SIGN = 'I'.
SELEC-OPTION = 'BT'.
SELEC-LOW = pr_eindt.
SELEC-HIGH = pr_eindt + 31.
SELECT * FROM EKET WHERE EINDT IN SELEC.
 CHECK EKET-MENGE NE 0.
 SELECT * FROM EKPO WHERE EBELN = EKET-EBELN AND
 EBELP = EKET-EBELP AND
 WERKS = Pr_WERKS.
 SELECT * FROM EKKO WHERE EBELN = EKET-EBELN AND
 LIFNR IN S_LIFNR AND
 BSTYP = 'L' AND
 FRGKE = 'R'.
 SELECT SINGLE * FROM MAKT WHERE MATNR = EKPO-MATNR AND
 SPRAS = 'EN'.
 SELECT SINGLE * FROM LFA1 WHERE LIFNR = EKKO-LIFNR.
 EXTRACT DETAIL.
 ENDSELECT.
 ENDSELECT.
ENDSELECT.

Ways of Performance Tuning
1. Selection Criteria
2. Select Statements
 Select Queries
 SQL Interface
 Aggregate Functions
 For all Entries
Select Over more than one internal table
Selection Criteria
1. Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement.
2. Select with selection list.
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
Select Statements Select Queries
1. Avoid nested selects
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
 WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
 FROM EKKO AS P INNER JOIN EKAN AS F
 ON PEBELN = FEBELN.
Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
2. Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
 SBOOK_WA-CONNID = '0400'.
3. When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields. In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
4. For testing existence, use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit.
SELECT * FROM SBOOK INTO SBOOK_WA
UP TO 1 ROWS
WHERE CARRID = 'LH'.
ENDSELECT.
The above code is more optimized as compared to the code mentioned below for testing existence of a record.
SELECT * FROM SBOOK INTO SBOOK_WA
 WHERE CARRID = 'LH'.
EXIT.
ENDSELECT.
5. Use Select Single if all primary key fields are supplied in the Where condition .
If all primary key fields are supplied in the Where conditions you can even use Select Single.
Select Single requires one communication with the database system, whereas Select-Endselect needs two.
Select Statements SQL Interface
1. Use column updates instead of single-row updates
to update your database tables.
SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
SFLIGHT_WA-SEATSOCC =
 SFLIGHT_WA-SEATSOCC - 1.
UPDATE SFLIGHT FROM SFLIGHT_WA.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
UPDATE SFLIGHT
 SET SEATSOCC = SEATSOCC - 1.
2. For all frequently used Select statements, try to use an index.
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE CARRID = 'LH'
 AND CONNID = '0400'.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE MANDT IN ( SELECT MANDT FROM T000 )
 AND CARRID = 'LH'
 AND CONNID = '0400'.
ENDSELECT.
3. Using buffered tables improves the performance considerably.
Bypassing the buffer increases the network considerably
SELECT SINGLE * FROM T100 INTO T100_WA
BYPASSING BUFFER
WHERE SPRSL = 'D'
 AND ARBGB = '00'
 AND MSGNR = '999'.
The above mentioned code can be more optimized by using the following code
SELECT SINGLE * FROM T100 INTO T100_WA
WHERE SPRSL = 'D'
 AND ARBGB = '00'
 AND MSGNR = '999'.
Select Statements Aggregate Functions
 If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
Some of the Aggregate functions allowed in SAP are MAX, MIN, AVG, SUM, COUNT, COUNT( * )
Consider the following extract.
 Maxno = 0.
 Select * from zflight where airln = LF and cntry = IN.
 Check zflight-fligh > maxno.
 Maxno = zflight-fligh.
 Endselect.
The above mentioned code can be much more optimized by using the following code.
Select max( fligh ) from zflight into maxno where airln = LF and cntry = IN.
Select Statements For All Entries
 The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
 The plus
 Large amount of data
 Mixing processing and reading of data
 Fast internal reprocessing of data
 Fast
 The Minus
 Difficult to program/understand
 Memory could be critical (use FREE or PACKAGE size)
Points to be must considered FOR ALL ENTRIES
 Check that data is present in the driver table
 Sorting the driver table
 Removing duplicates from the driver table
Consider the following piece of extract
 Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
 Endloop.
The above mentioned can be more optimized by using the following code.
Sort int_cntry by cntry.
Delete adjacent duplicates from int_cntry.
If NOT int_cntry[] is INITIAL.
 Select * from zfligh appending table int_fligh
 For all entries in int_cntry
 Where cntry = int_cntry-cntry.
Endif.
Select Statements Select Over more than one Internal table
1. Its better to use a views instead of nested Select statements.
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE 'CHAR%'
 AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T INTO DD01T_WA
 WHERE DOMNAME = DD01L_WA-DOMNAME
 AND AS4LOCAL = 'A'
 AND AS4VERS = DD01L_WA-AS4VERS
 AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
The above code can be more optimized by extracting all the data from view DD01V_WA
SELECT * FROM DD01V INTO DD01V_WA
WHERE DOMNAME LIKE 'CHAR%'
 AND DDLANGUAGE = SY-LANGU.
ENDSELECT
2. To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
 WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
 FROM EKKO AS P INNER JOIN EKAN AS F
 ON PEBELN = FEBELN.
3. Instead of using nested Select loops it is often better to use subqueries.
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
 AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
 INTO SFLIGHT_WA
 FOR ALL ENTRIES IN T_SPFLI
 WHERE SEATSOCC < F~SEATSMAX
 AND CARRID = T_SPFLI-CARRID
 AND CONNID = T_SPFLI-CONNID
 AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
 WHERE SEATSOCC < F~SEATSMAX
 AND EXISTS ( SELECT * FROM SPFLI
 WHERE CARRID = F~CARRID
 AND CONNID = F~CONNID
 AND CITYFROM = 'FRANKFURT'
 AND CITYTO = 'NEW YORK' )
 AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
1. Table operations should be done using explicit work areas rather than via header lines.
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
2. Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
3. A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4. A binary search using secondary index takes considerably less time.
5. LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
6. Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7. Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
 <WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
 WA-FLAG = 'X'.
 MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
8. If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
 ADD: WA1-VAL1 TO WA2-VAL1,
 WA1-VAL2 TO WA2-VAL2.
 MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
 INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
9. "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
10. DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
 DELETE ITAB.
ELSE.
 PREV_LINE = WA.
ENDIF.
ENDLOOP.
11. "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12. Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
13. Specify the sort key as restrictively as possible to run the program faster.
SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables contd
Hashed and Sorted tables
1. For single read access hashed tables are more optimized as compared to sorted tables.
2. For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP.

Please give some logical code

Hi Experts,
Please give me the logic for the given below scenario
I-Table
A B
1 a
1 b
1 c
2 d
3 a
3 e
3 f
4 g
4 g
In the above itab , itab have lot of records (1000000). i want to display what are all having multiple values only in column A.i want to delete single records (like 2 d(4th row)this row will be delete ) if column A and column B having same value i want to delete that rows.
Thanks & Regards,
Rajan

Hi Raja..
Just paste this code..solves ur problem
data:
begin of itab occurs 0,
f1 type i ,
f2 type c value 'X',
end of itab.
data wa_itab like line of itab.
data:
w_temp type i,
w_ctr type i.
itab-f1 = 1.
append itab.
itab-f1 = 1.
append itab.
itab-f1 = 2.
append itab.
itab-f1 = 2.
append itab.
itab-f1 = 2.
append itab.
itab-f1 = 7.
append itab.
itab-f1 = 3.
append itab.
itab-f1 = 4.
append itab.
itab-f1 = 4.
append itab.
itab-f1 = 5.
append itab.
sort itab by f1.
loop at itab.
at new f1.
 w_ctr = sy-tabix + 1.
 read table itab index w_ctr into wa_itab.
 if itab-f1 ne wa_itab-f1.
 continue.
 endif.
 endat.
write: / itab-f1, itab-f2.
endloop.

Hii updated my New Ipad to iOS 6, and when i try to open itunes a dialog box appear which says " Cannot Connect to Itunes Store"??????..please give some solution

hiii
I updated my new ipad to iOS6 and when I try to open itunes a box appear which says " Cannot connect to itunes store"?????????
please give me some solution.
And i also try to bluetooth to connect to another apple device, but no pairing or connection is made???????????

hiii
I updated my new ipad to iOS6 and when I try to open itunes a box appear which says " Cannot connect to itunes store"?????????
please give me some solution.
And i also try to bluetooth to connect to another apple device, but no pairing or connection is made???????????

Please give some idea friends.

I have a text file with 10 lines. Eas line is containing 3 words separated by colon. I have a bean to get those 3 words. What i want to do is to create 10 bean object, initialize them with the data available in the text file. and finally store those beans in a array list. I have written the following code to read a line and bread the line in tokens. After that how i should proceed. Please give me some idea.
                        for(String line = null; (line = br.readLine()) != null; lineCount++) {
                                StringTokenizer tokenizer = new StringTokenizer(line, ":");
                                while(tokenizer.hasMoreTokens()) {
                                        String strTemp = tokenizer.nextToken();
                                        System.out.println(strTemp);
                                }Thanks.

you should have an array of strings to store the information and then call your object constructor, passing it the various elements in the array. I couldn't tell from looking at your code, but if you don't include a space in the tokenizer constructor, then it will return a word including a space. I'm not sure if that matters to you or not.

Questions about APO training (Please reply urgently).

Hey guys,
I am starting my training in APO with a training institute ,which will train me for about 50 hrs on APO, and grant me 3 months of access to the SAP system.
I had the following questions.
1. What are the prior requirements if you have to take certification exam for APO? Are there any prerequisites, or any sort of other requirements?
2. I wanted to know if 3 months access would be enough for me to prepare for certification?If not then how much access is enough?
3. How long can I not give the exam again, if I fail once?
Thanks a lot guys,
Take care.

Please refer to the WIKI page of (Supply Chain Management) SCM in the APO section in the same SDN site; you have FAQs and good training material in that WIKI page. Please refer to this, hope this may help you.

4 Questions About Iphoto- Experts Please Reply

Hi, im still new to iphoto 11 and mac in general, so im hoping I will find a few people on here who can bring me up to speed fast on a few things that Im having problems with.
I imported some photos from my digital camera ( then wiped them off my camera ) now they all show up in iphoto which is fine but here are my questions
1. I want to use the share option and upload to facebook but I notice by looking under info that each photo is like 4mb in size which is massive. So I know you can select it and export out and select SMALL and that will reduce the size of the photos but then it exports them to a folder on my computer. How can i relook at those photos that are exported and edit them further within iphoto before hitting share in iphoto? Do i have to import them back into iphoto? and if so do I now have duplicate photos?
2.When i imported all the photos from my camera in, it just gave them filenames like 293043.jpg and so when i go to FINDER and look under photos it shows them all as numbers and i want each photo to be something like meinnewyork.jpg, intimessquare.jpg, empirestatesbuilding.jpg now usually in windows i would just rename but I cant seem to do that here in batch. Yes I have tried doing this by going in iphoto to PHOTOS and batch change but all that does is change the title and description not the filename. So how do i do this, there must be a simple way?
3. Right now when i go into iphoto and click either events or photos in the left bar i see my photos. But I want to sort them into albums, so I have about 100 taken from my trip to new york but I want an album for "empire states building", "times square" etc... Now I know how to create an album and add them to it, But my question is. Does this create doubles of your photos as I dont want my computer filling up with doubles of photos?
4. Iphoto 11 seems to be automatically taken my photos and creating more photos from those photos called " FACES" how do i stop it automatically doing that and if i want to use that feature is there a place to turn it on?
I know this seems like a lot of questions but it would help me tons
Thanks

Q1
If you want to uload smaller photos from iPhoto (and I don't know why you would as Facebook will compress them
anyway) then the thing to do is export last thing, only after you have done all your editing.
Q2
When you title a photo in iPhoto that's adding a title not renaming a file. But you're making a different mistake here. When you use an app like iPhoto it becomes your go-to app for your photgraphs. Everything you need to do - edit, print, upload, whatever - should be done via or with iphoto, not the Finder. There is no way to rename a file in iPhoto except during export.
Q3
No it doesn't. iPhoto Albums simply reference photos in the Library. A shot can be in 50 albums and use no extra disk space whatever.
Q4.
Where are you seeing these _Face files? In the iPhoto Window? Somewhere else?
Regards
TD

Two part question about iPhone.

Hi,
Am I the only one that has been wondering and trying to figuer out how to use the itunes button on my iPhone. Evertime I try to buy a song using my iPhone itunes button I get a box popping up telling me you do not have a itunes acount. I beg to differ on that one. I have had one for along wile. I am using my own WIFI for this at home I was told from the Apple I could do this easy. If I have learned anything about tech nothing is as easy as people say it is. Do I have to be longed in from my computer first if this is true that really defeets the purpes of wileless Please can anyone help me with this problom.
Also has anyone notest when there iPhone dimes dose the light kinda flicker or studer somewhat as it go's into dim mode. I have just started to notest this. Maby its always done this but if so I guess I have never noest it before now. Thanks.

Computerguy,
In order to use the iTunes WiFi Store on the iPhone you need to sync the account information to the iPhone as discussed in this article:
http://docs.info.apple.com/article.html?artnum=306432
Hope this helps,
Nathan C.

Question about battery replacement please

I have a B575 laptop. I'm looking to replace the battery. The question I have, the battery that came with the computer is rated at 10.8v. The replacements I've seen are rated at 11.1v. Will the voltage difference be harmful to my computer or shorten the life of the new battery, or is it a marketing gimmick where all batteries have an actual rating that varies slightly.
Please advise ASAP.
Thanks.

hi JustMeee,
Welcome to the Lenovo Forums.
In replacing the battery, it is ideal that you get a:
- battery with the same rated voltage (this is the specific voltage measurement at which the laptop can start functioning)
- battery with a lenovo FRU on it (this is to prevent any "unauthorized battery" error)
From this item,
There are two Voltage definitions: rated Voltage and maximum Voltage. The rated Voltage is the number of Volts required by the appliance in which the appliance is used. The maximum Voltage is the number of Volts provided by the battery when fully charged.
It's possible that the 11.1v replacement batteries that you saw is the maxmum voltage - which is ok and will not harm the battery nor the system but if this is the rated voltage, I recommend you stay away as it may do the opposite.
- Link to picture (page 80 of the HMM)
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

2 part question about insipre 6600.....please give some me some advice.

Similar Messages

Maybe you are looking for