2 Plants with different moving average price under 1 co code

Hi,
I understand we can have different cost for 2 different plants under the same co code. How is it handle when 1 plant transfer to another and we need to add third party cost to showing the revised moving price.
Pls help .
Thanks
YP

Hi,
Good evening and greetings,
Normally as per Standard SAP you can accommodate the process as per the link below
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/3f20c2c1bb4780b29504c6e8378b2e/frameset.htm
The system accounts the price as per the receiving plant if a normal plant to plant stock transfer is executed, i.e. not through STO route.
Pleaser reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Similar Messages

  • STO with moving average price & with out moving average price

    Hi,
    i have two questions.
    1) I have created STO and issued the material with 351 movement type, after issuing material accounting documents will be with moving average price from issuing plant.
    what is the other process to issue with out moving average price ,the price must take as per in PO(sto).
    2) why we will use STO why cont we use 301 movement type with one step transfer.
    Pls help
    Regards
    Sunil

    Hi Sunil,
    1) the 351 movement type uses always the price from the material master, you can't change it
    2) I don't really understand your question. You need advise when using STO and when 301?
    Attila

  • How to view materials with selected moving average price

    Dear Gurus,
    How to view materials with moving average price greater than some selected value?  ie..Is there any report which takes moving average price as input?
    Thanks in advance,
    Sastry

    HI
    While checking any table or report u cannot give conditions (more than this value).
    If it mabe the case, down load the data from table MBEW - Field Name VERPR  to excel file. then u apply conditions, like greater than this value.
    U'll get the desired out put.
    Thanks
    Raman

  • How to change moving average price with movement type 501

    Hi Gurus,
                         Our client procures stock item with P-Card and use the movement type 501 to receive into the stock. The value of these items are updated with the moving average price, most of the time the current purchase price is different than current moving average price, so client wants to change the moving average at the time of receiving the goods into the system. Can some one explain is it possible or not. If possible how can we adjust the price? Client doesnu2019t want to go modify the price with other transaction. They want to modify while receiving with MIGO.
    Thanks,
    Vikram

    Hi
    You need to goto transaction OMJJ, select the movement type as 501.
    Then double click on "Field selection-Enjoy transaction".
    Add the field EXWBR & make it optional.
    Now when you goto MIGO & enter 501 movement type you will find the Ext amount in LC field on Quantity tab page.
    Enter the amount in this field during the GR.
    Regards
    Prasad

  • Material with moving average price ,while posting grn act as standard price

    hi gurus
    i have a material with a moving average price , according to moving average price during grn posting no price difference account should be created at any circumstance , but while i posted grn , i am getting stock account - wip 14407.98 , GRIR - DM 16800 -
    Price difference  matl trns - 2392.02 WHY THESE PRICE DIFFERENCE CREATED  i have maintained only moving average price in  accounting view
    regards
    Leo

    hi
    In SAP we have two price control  moving average price and standard price
    In MMR if u using Moving average Price  if any difference in price it will post it to stock account
    but in case of standard price it post it o PRD account (Price diff Account)
    Regards
    AKM

  • GL to get updated with Moving average price

    Hi Guru's
    when we do PGI, currently the cost of goods issue value is updated from Moving average price into a GL account,
    Now i have created a new GL account and also want this new GL to get updated with the Moving average Price.
    Where can i make these settings. can u give step by step solution.
    Regards
    Abhijeet

    First u pls check how its updating with moving average price and select in MMRecord valuation class and price options, then check settings for ur gl account go to fs00 display mode check settings in control data.
    Compare ur gl account which u have created with standard Gl account.

  • Moving Average Price for Batch Maintenance

    Hi Experts,
          I've created material of which stock is maintain in batch (Valuation category = X & Price Control = V).
        Due to batch wise stock, system calculates the moving average price for different batches.
        Can we calculate moving average price at plant level inspite of maintaining material batch wise?
       Is there any other way by defining multiple storage bins for that material so that I can see the stock value differently with single moving average price value?
       Thanks.
                                                   Naimish.

    In MM03, you get the overall MAP for all batches of the material at plant level without mentioning valuation type in org. level. When specific valuation type is given, you can see its MAP / std price.
    Hope this clears the doubt.
    Regards,
    SAmeer

  • Separate Moving Average prices for Same Material

    HI All,
    My client wants to maintain moving average price separately by shipment wise. In this scenario same material for same plant might have different moving average prices for each shipment. Is it possible with standard SAP system or how is it map in to System?
    Thank you & Best Regards
    Sameera

    Duplicate thread already same question raised refer below link,
    [Re: Separate Moving Average prices for Same Material]

  • REM wip and moving average price

    Hi,
    I am working in REM scenario. my fert item is having moving average price say Rs 2.Currently zero stock of finished item. I am having a planned orderA quantity 10  from Oct 1st to nov 30th. when i do backflush at nov 30 , i do assembly backflush and post auto GR of 10 quantity. after doing settlement, i got my moving average price as Rs12.
    I have another planned order B for quantity 20, same finished item from oct 15th to dec15th. On nov 30th when i am doing component backflush or activity backflush of second planned order( i am not doing assembly backflush on nov 30 because this order is not yet completed, it will complete on 15th December), system is posting all cost on my existing stock of finished item and increasing the moving average price of finished item from Rs 12 to Rs 17.
    But this is wrong because cost should not exceed for existing stock, cost should be posted for WIP..
    Please tell me how to correct this?
    how to calculate WIP in REM? is it mandatory to go for reporting backflush? i have only one operation in my rate routing i.e labor hours is my only operation  in 0010.
    Regards.

    Hi,
    Thanks for ur help.
    But my doubt is something different!
    If i have a planned order' A'( qty 10)which is completed in Novemeber month and another planned order 'B' ( qty 20) which is still in WIP on November end, and at this stage if I do backflush for planned order A, cost flows properly and finished item is put in stock with some moving average price.But when i book labor hours again for planned order B, it books cost. But this time i do not do assembly backflush because production is not yet finsihed.so stock quantity is still the old one i.e 10 qty.So second cost booking goes to the stock item of 10 qty and increases the moving average price. system dfoesnt understand that second labor hours is booked for second planned order . this is happening because both planned orders are of same finished item.
    please reply.
    please tell me what is the way to do reporting backflush. what settign we need to do? can it solve my issue?? because my target is to book cost in case of second planned order as WIP and do NOT effect the moving average price of existing stock.
    Regards.

  • Difference between Standard Pricing and Moving Average Price

    Hi,
    Would like to seek some advises on the difference between standard price and Moving average price.
    also, how does it affect the account postings differently?
    Thanks

    Standard Price
    Materials whose price control indicator is set to S are valuated in Financial Accounting (FI) at standard price.
    This is recommended for semifinished products and finished products.
    The moving average price is shown as a statistical value in the material master record.
    The standard price is normally calculated using a standard cost estimate for the material. The standard price can also be calculated in a mixed cost estimate.
    Moving Average Price
    When materials whose price control indicator is set to V are received from in-house manufacturing processes, they are initially valuated with a value you defined (such as the standard price). When you settle, the material stock account is debited with the variances. This results in a new moving average price.
    Valuating semifinished products and finished products with the moving average price is not recommended.
    Regards,
    Indranil

  • Moving average price and returns to vendor

    Hello gurus,
    I’ve got a question concerning material valuation and returns to vendor.
    E.g. we have got 200 pieces of a material with a moving average price of 2 $ each.
    Now, what happens if I return 100 of those to my vendor who pays 2.10$ each for them?
    In my view, there are several possibilities:
    - Nothing happens, the moving average price is not changed at all, value of the goods is 200$ afterwards.
    - New value of the goods is 400$ - (100 * 2.10$) = 190 $. This would mean that the moving average price is 1.90 $.
    - Last delivered price was e.g. 2.20$, more than 100 pieces were delivered, so the new value of the goods is 400$ - (100 * 2.20$) = 180$, new moving average price is 1.80$.
    So my question is: What is standard in SAP?
    Thanks
    Jens

    This is what my thought is
    When you return the material to vendor then system take the same valuation as your MAP
    and when you buy new goods then it will count based on the
    e.g. existing stock is 100 and value is 1000 means valuation is 10 a peice
    in you but another 100 at 1200 then valuation is 2200/200 = 11
    When a material is subject to moving average price control, the system calculates values for goods movements in the following way:
    check this link
    http://help.sap.com/erp2005_ehp_02/helpdata/en/8f/d1de34e4cb2300e10000009b38f83b/frameset.htm

  • Report for moving average price

    Hi guys
    Is there any report in MM which shows me different Moving average prices for a material (scenario is price changes very often for the material in PO)
    Thanks
    Samuel

    I do not think you will have such data stored in the system but you could pull the data for the current period, previous period and previous year from table MBEW. This much possible.

  • FIFO with moving average price

    we are using for own produced goods "moving average price" and Material ledger. At month end we setlle production variance . The system also creates an entry for ML "price variance" (which is the percentage of the prodcution variance for the remained stock).
    When we run the document extract (MRF3), with the option of "Order settlement", the costs include not only the production variance but also the ML line. That is too high.
    When we run it without selecting "Order settlement" the adjustement is the reversal of the price variance (the ML line item). That is too low.
    The total costs should be only the total production costs.
    One cannot exlude it by the material movement as both "price variance" and "production variance" is not part of a material movement.
    Edited by: Hendrik585 on May 27, 2011 2:16 PM
    Edited by: Hendrik585 on Jun 5, 2011 11:36 PM

    hi,
    We need to follow the steps if we need to valuate our inventory by means of FIFO Scenario :
    1. In T-code OMWE, activate the balance sheet valuation as LIFO Valuation not active & FIFO Valuation active.
    2. In T-code MRLH, FIFO Maintained at company code or plant level.
    3. In T-code OMWL, set mean receipt price at valuation ares level if Plant or at company code level if at company code level.
    4. Configure FIFO Valuation ares for teh respective year.
    5. In T-code OMWP, Configure FIFO Method.
    6. In T-code OMW4, Movemnet type settings for FIFO maintained. Generally, no chnages made.
    7. Select material for FIFO in Tcode MRF4.
    8. Execute FIFO Valuation- Tcode MRF1.
    Hope it helps..
    Regards
    Priyanka.P

  • Does moving average price work with multiple valuations?

    Dear All,
    I have activated multiple valuations: Legal, group and profit center.
    I have activated ML/Actual costing for this multiple valuations too.
    Now I have 3 price fields in material master.
    Could I use moving average price for some materials types in multiple valuations?
    Thank you,
    With best regards,
    Kamila.

    Hi Kamila,
    yes, ML is always activated for all materials in a plant. To use MAP you have to set the price determination of a material to '2':
    This is the F1 help of the field price determination:
    Material Price Determination: Control
    Specifies how the material price determination should procede.
    You have the following options:
    With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
    In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
    This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
    In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.
    Dependencies
    The indicator is only of use if the material ledger is active.
    Upon activating a valuation area for the Material Ledger in Customizing, you can enter what type of material price determination will be proposed when creating a material in that valuation area. This proposal will be ignored at production startup: the system automatically sets the indicator to 2 in the material master for all materials present.
    If you want to change the indicator for a particular material later, choose Accounting -> Controlling -> Actual Costing/Material Ledger -> Environment -> Change Material Price Determination.
    best regards,
               Udo

  • Moving average price with each Posting

    Hi Friends,
    Is there any report where we can see the moving average price change for every material posting. Like present MAP is 100/- but with my next receipt it changed to 110/- so is there any report which show the price change from earlier price.
    If there is no standard report, is there any way we can build the logic to prepare a custom report. Thanks......
    Best Regards

    Hi Jaya,
    There is no standard report for this but you can use the transaction code CKM3. It will show you the detailed history of MAP - material movement & material document wise, provided the plant in consideration is active with Material Ledger.
    Try this and give your feedback.
    Thanks & regards,
    Indrashish

Maybe you are looking for