2 Po's for the same SC

Hi Experts,
We have a strange case where for a single SC which contains only one line item there are two PO's created.
any inputs will be appreciated
Sameer

Two scenario's I can think of to explain this occurence:
1. The SC went to sourcing, and 1st PO was created. Then the sourcing relevant flag was changed back to 'X' so the SC showed up in sourcing again and the 2nd PO was created.
However a more likely explanation could be:
2. SC went to sourcing and 1st PO was created. The user deleted the item from the PO, then the SC quantity is more than PO quantity so SRM thinks outstanding items for PO then sends the SC back to sourcing for the 'balance' of the items.
Let me know if any of the above explain what happened in your system.
regards,

Similar Messages

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

HT5429 direction is not coming in IOS 6 in india. can someone help me for the same?

direction is not coming in IOS 6 in india. can someone help me for the same? i'm using iphone 4

Hi Civilclerk1,
In order to achieve your requirement, we can try to use the following expression to instead the last_name column and first_name field:
last_name: =iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,Fields! last_name.Value,nothing)
first_name: =iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,Fields! first_name.Value,nothing)
Besides, if we don’t want see the blank row in the tablix, we can add a filter as below in the tablix:
Expression:=iif(Fields! staff_role.Value="Lead Atty" or Fields! staff_role.Value="BK Mgr" or Fields! staff_role.Value="Partner" ,1,0)
Operator:=
Value:=1
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

How to generate different report view in teststand for the same execution?

My requirment is to have two different view for the same report that gets generated during one execution using in TestStand OI(CVI)? One view would be summary view (displays only test step types, excluding action step types) and the other view is detail view that displays all the steps that are recorded. Data for all the steps needs to get recorded in database. Any suggestions are helpful!!
CLD,CTD

Hello.
I think you would have to create two separate reports, one as summary report and one as a 'full' report The viewers are just 'viewers' and simply display whatever you set to them.
I had display a text report that was basically a summary report ( failures only ) and then display an HTML report that contained all steps were set to be recorded. This required quite a bit of modifications on both the process model and the operator interface side. The operator interface (in LabVIEW ) had to contain 2 separate UIReportView controls.
Let me know if that is your desired direction and I could point you to some more ideas.
Thanks,
PH

How do I set up multiple Creative Cloud accounts for the same login?

I have a number of Macs of various flavors. I want to install Creative Cloud apps on four of these units.
I have a subscription currently which I am using for my MBP 17, and a 27" iMac.
I want to add an account for my MB Air and Mac Pro, and I'm willing to double my subscription fees to do it. (I use different apps on each of the computers, though I like the idea of having the ability to use them all on each.) How do I accomplish this addtional subscription without having to add a new Adobe account?
Second Question:
I have the one-year special on my current subscription due to licensed PS 5.5. ($29.95/mo). Would I be eligible on my second subscription for the same deal due to the license on the PS 5.5, or would I qualify due to being a Acrobat Pro 8 owner... or Licensed owner of previous versions of PS? OR.... would I immediately be paying $49.95/mo for the second account?
Either way, I'm in. Just want to do it all under one account if at all possible.
Thanks in advance for resolution. Cheers.

Currently all subscriptions (with the exception of Team Ready) require a separate Adobe ID for each Creative Cloud Membership. Its not possible to have two memberships under the same Adobe ID.
Adobe has a Team Ready offering for customers interested in a volume license for Creative Cloud. This is a TLP volume license to Master Collection CS6 and includes licensing for Lightroom and Muse. Customers with this will transition to Creative Cloud Team once available later in 2012. This product uses only a single serial # and Adobe ID. It's not the same as Creative Cloud Membership like what is currently available, but rather a means to get customers setup with something now to transition to the volume license Creative Cloud Team offering once available. If this sounds like something you would be interested in please contact a local Adobe Reseller for more info.
This link has more info:
http://www.adobe.com/products/creativesuite/companies.html
This link can help someone find a reseller in NA
http://partners.adobe.com/resellerfinder/na/reseller.jsp?nav=al
I just read over the terms of the introductory offer and it is a 1 per customer offer, so it would be 49.95/mo for a second account.
https://creativecloud-specialoffer.adobe.com/special-offer/?loc=en_US
Hope that helps,
-Dave

HT204053 my wife and i have seperate itunes accounts is there a way we can link our accounts to share songs so we dont have to pay for the same song twice?

When the first ipad came out i set it up and created an itunes account, since then she got an iphone and an ipad and everything was good. I had an android but wanted to try out the iphone. When i set it up ut jumpled all of our contacts, apps, and everythin. it was a mess.
Since, i purchased and ipad 2 and an iphone and to keep our stuff from combing i used a different computer and created an new apple ID for myself so our info wouldnt combine, I was wondering if i did the right thing or if i should have went about it a different way. I was going to see if there was a way when she purchased a song i could get it. I dont want to pay for the same song twice and only want to share songs. If i cant do this can i copy her library and paste it into my itunes??
Any help wouldl be greatly apprecieated we both have icloud set up but i cant figure out the best solution.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

The same Object Version Number for the same person id multiple times

Hello all,
I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

Hi Baal666bobo,
The person table is date-tracked, so the PK has effective start and end dates as well.
Get the correct record with sysdate(or any particular date) and then check the OVN.
Cheers,
Vignesh

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

WebTools Creating multiple users for the same User

I had to make a few changes to a BP in SAP which will synch back into WebTools but now I am getting multiple users for the same contact. For example my user is cspehar_1 now in Webtools there are cspehar_1, cspehar_2, cspehar_3 and so on up to _8.
This is occuring for several users in webtools.
What causes this and how do I fix it?
Thanks,
Craig Spehar

Hi Craig,
There are two ways to cause this that I am aware of:
1. Change the "Business Partner Synch Contacts Field" setting after the initial synch.
2. Change the Web UserID on the BP contact in B1 (OCPR.U_PRX_SID).
After that, update the user in WT and synch. (might also happen if you update the BP in B1)
Since the synch is using the OCPR.U_PRX_SID to identify the contact, it will not be able to find it in B1 if the U_PRX_SID has changed. When it does not find it, it assumes it needs to be created. This results in a duplicate.
The solution is to reset the U_PRX_SID back to what it was or set the synch contact field back to what it was.
Then delete the last created duplicate contact from B1.
There may be further data corruption issues here. If orders/quotes/opportunities or other dependant data has synchronized referencing the duplicate user, these data will need to be correct as well.
FYI, whatever caused this was probably at the root of your order problem as well.

Multiple layouts for the same user in the same portal

Hello.
I have a challenge.
Currently there is a portal (6.40) running as a frontend for an application. So the portal is used for only this purpose. The content is a changed masthead and a number of WebDynpros and UWL's all accessing the same backend.
Now there is a wish to use the same portal to execute a transaction iView for the same backend. Simple. BUT when a user uses the portal for the product he/she shall not see the transaction iView and also when the user sees the transaction iView, the WDs and UWL's should not be shown in the navigation. And also the masthead should be different on the two views.
Putting in another portal is not anoption, this should be done on the same portal. The way I expect it to work is by accessing the same portal og two different URL's.
Companies cannot be used since some of the users should be able to access poth views.
I know that in a prefect world it would simply be a matter of creating two different roles and assign them as needed and if the user has both roles hen they would both be available in the navigation. But to the user the portal should look like different portals.
Any suggestions on how to achieve this functionality?
Br,
Thomas Mouritsen

Hi Thomas,
you have several options with the portal standard:
1.) If the user only has one role assigned at a time you can attach the portal layout to the roles. So depending on the role the user has he sees the respective layout - BUT: how to asign the two roles to the user!? This can only be done by admins and I assume that it is no intended to call the admins every time the user needs the other role?
2.) The entry to the portal is realized with different urls like http://yourportal.com/VIEW1 and http://yourportal.com/VIEW2.
VIEW1 and VIEW2 are so called portal aliases and you can attach the different layouts to those aliases.
BUT: the two roles have nothing to do with the aliases so you still have the problem of role assignment.
3.) Each person gets two users with each user assigned to one role and one layout assigned to the user or group or role...
Anyhow: I would ask the people who brought up the idea of two different layouts - WHY?? A portal is ONE single point of entry for EVERY application and information a user needs. So why two different layouts? And what, if five others are coming each bringing their own layouts, too?
4.) If you really want to have different layouts each time a different top-level navigation point is active you have to program your own portal component. That would fit your needs but is besides standard.
Hth,
Michael

Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

Hi,
Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
Below are the 2 records the data from the table
select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
122:17056     122     17056     802     801
15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A
122:17056     122     17056     802     801
Thanks in advance,
-vijay

It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
Case -1 : When you delete the existing model and re-import again.
case 2:
When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
-Murali
Edited by: 907569 on Jan 8, 2013 10:55 AM

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

2 Po's for the same SC

Similar Messages

Maybe you are looking for