2 problems i have with my N82 (Firmware Update, As...

I have one N82 mobile and i was not able to update its firmware. Everytime i try to update (with Nokia Software Updater v1.4.23en) from version 10.0.046 to 11.0.117 is telling me "Updating Software Fail". It regognizes my mobile and it has downloaded the update from nokia server, but everytime i have tryed to update it fails and it is asking me to retry. I have checked the FAQs and i am sure that i have a valid SIM card inserted, Power/Internet connection is not lost during update, i have removed and inserted again a fully charged battery, and the Device is in Normal profile. Can anyone help me please?
Another problem i have is that i couldn't find where to go if i want to assign an mp3 as a ringing tone for a specific person. When i go to "Contacts>i select a contact>Ringing Tone" it gives me only 2 options. "Download Sounds" & "Default tone". Wasn't suppose to be another option for assigning your own songs?
Thanks for any possible help you can give me!

Hi 123musicv
I had similar problems with NSU v1.4.23en which in my situation was only resolved by un-installing all Nokia applications, cleaning up the registry and re-installing NSU.
Incidentally you can install NSU without PC Suite being present and in this case PC Connectivity Solutions is downloaded at the same time.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Problems with waking after firmware update ...

Hi ya'll - quick question.
Did the latest firmware update last night and have noticed that waking the computer from sleep has become a problem, maybe once every three times I try to wake it? The backlight visibly turns on and illuminates the black screen, but the password box dosen't ever pop up, leaving me with a plain cursor. I'll try to hit random buttons (not that I think it'll help, but you know) and the 'Funk' sound plays, so I know the computer is working and is on. I have to hold the power button and restart it everytime. Any reason this might be happening now, after the update? It used to every now and then, and had sllooow wake times before the update, the latter of which has been fixed. The update was performed right and completed itself, etc.
Thanks for any help!

i also have problems waking it up since the efi firmware update! i primarily use the macbook only with an exernal display and wake it up by plugging in the power, lan, display and usb connectors, i.e. quite often, i don't even open the lid. since the firmware update, i regularly get a light blue screen and nothing happens. i then have to restart it through the power button as well.

WiFi Problems - TC to MP, since recent firmware update

Hello,
i found some threads about other people having trouble here, but nothing seemed to fit my situation.
I have 2 Macs - a Mac Pro (Early 2008) and a MacBook (Late 2008). And a Time Capsule, which i purchased sometime between the Macs. Up to now, everything worked perfect, both machines were connected via WiFi to the TC. But since the recent firmware update, the MacBook works fine with the TC, absolutely no problems, but the Mac Pro (a bit longer distance) doesn't work any longer.
This started on Friday (i don't use the MP daily), it was impossible to get a WiFi connection, tried re-entering connection data and so - no success.
On Saturday, i used the cable to check the TC configuration, everything worked fine, and after fiddling around with the setup, i finally got WiFi working again.
Sunday - MP was off all the day.
Today - Just powered it up, no WiFi. When i disable and re-enable AirPort, it gets a connection for a second or 2, but then drops it. If i get a connection, i have a strong signal (all bars black), so signal quality isn't an issue. And before the update, everything worked fine, the only change is the firmware update last week.
The MacBook doesn't have any issues, no matter, where it is located. I'm currently writing this post on it while syncing some home directory stuff with the MP (MB connected via WiFi, MP connected via cable).
So what is this new problem? After damaging USB to complete unusability, Apple now continues with the WLAN features? What comes next? When will all this be fixed?
Meanwhile, i think it was not the best idea to switch to Apple about a year ago. The continous quality drops get painful meanwhile. I wonder when my iPhone gets unusable (which also works fine with the TC, by the way
...Michael

Hi again,
okay. It really was the 7.4.1 firmware. This morning, i reverted to 7.3.2, did a full reset, reconfigured everything, and now my network works fine as it did before.
It seems to be important to reconfigure the TC, as just downgrading the firmware didn't really help, while full reconfig with 7.4.1 also doesn't help.
I now turned off the automatic search for new versions on the TC. I will be informed by the AP Express, which has no problems with 7.4.1 yet.
Hope, Apple re-introduces quality control soon and doesn't make the customers be the beta-testers.
...Michael

Compability with OSX for firmware updates?

Considering a new phone, and keeping the firmware-update from Asha to Belle in mind, will it be (or is it) possible to install new windows phone firmware on your phone from OSX?
I don't have a Windows OS in the house, and would like to keep it that way on pc-level. But with the news of today I wonder if I should stick to Nokia. (I still like the Symbian)
Solved!
Go to Solution.

Windows Phone OS and firmware updates are always OTA by either mobile data or WiFi.
Getting apps to the phone is done through the webinterface for the store followed by sending the app by either mobile data or WiFi
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Whats with these huge firmware updates???

So i figured i'd only need 8 gb of space on a iphone so i bought a 8gb, but of course you dont actually get 8 gb you get about 7.2 after the OS and apps that are preinstalled. Then these 250 mb firmware updates come along and now 2 make it 500 mb and were not even on 2.1 yet and i;m thinking gezz when 2.1 comes along i'm gonna only have about 6.8 or 6.5 gb left to use.
Has apple thought maybe we should think about how large these updates really need to be so people can actually enjoy the space left on for media and what not?????
Anyone wanna contribute to this tread???

thanks for clearing that up for me, i wasn't sure if it added or replaced it so that makes much more sense to me now.
Would a 2.1 update though add to the exsisting update or does it do the same thing as a firmware up date and replace the existing one???
as far as i've been told 2.0.? are firmware and 2.? are software update, so does this mean more space added.....
....oh and yes i wish i had bought a 16g but at the time the 16 were really hard to get your hands on and a 8g was available without standing in a long line up.
I'm only hoping in 2 years apple will have 80g iPhones that would be awesome!!!!!

Nokia N82 firmware update problem

Hi,
I have soft formatted my N82 using *#7370#. And then when I am trying to update the firmware usign Nokia Software Updater, the software popping an error saying "Microsoft Visual C++ Library error : R6002 Floating Point support not loaded" and then application is getting terminated.
Initially before formatting it was proceeding to update the firmware however after the soft format its not!
Can anyone please help me out !!!!

Hi!
I have just updated my 5300 with the new software and I have the same problem, you can't change the font colour! First thing I noticed.
Also, half my contacts have disappeared - everything after J. I tryed restoring them from a backup but the backup fails.

Problem with N73 after firmware update

Recently I tried to update the firmware on my Nokia n73. Somehow the cable got disconnected and the phone died. I read everything on the topic here and went directly to the nearest NCS. There they repaired my phone and updated the firmware to V3.0638.0.0.30 (everything else shown after *#0000# is: 30-10-2006, RM-133, Nokia N73 (05)). But after that, I noticed that when I press the multimedia button, it opens directly the music player, instead of a list of applications. Also when I hold down the menu button it shows both the standby icon and the music one. My problem is that I mostly use the camera, not the music player, and it seems (to me) that it slows the phone down (especially when going through the image gallery). So I was wondering if anyone can tell me how to close the music player, or at least how to change back the multimedia button to a list of applications. I am using the standard 128mb miniSD. Thanks in advance and cheers from Bulgaria.
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

don't mean to be rude, but where are those Multimedia options? i tried settings, profiles...and besides that when i press the multimedia button i end up at a screen with "Now Playing" on top and when i Press "back" two times i go to "Music menu" from where i have either
OPTIONS ->
- Go to now playing
- Go to Music shop
- Refresh music library
- Music library details
- Help
or
PHONE which brings me to the standby display...Message Edited by radi78231 on 12-Jan-2007
04:43 PM
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

N86 problem with gps after firmware update

J2ME-apps crashes or hangs with external gps after upgrade to firmware 30.009. This worked before the update.
The phone is a N86 RM484 and external GPS is a Globalsat 359.
The apps in question are GC LIve (http://live.geocaching.com/dl) and a homebrewn app.
When using external gps I only have "external gps" activated in "positioning methods". When using internal gps all options EXCEPT external gps are activated.
"OVI Maps", "Google maps" and "GPS status" all work fine with external GPS.
I've tried to reset the phone with three different methods but none fixes the problem. Methods I've tried: *#7780#, *#7370# and the acrobatic 4-button combo.
I'm all out of ideas, and hope someone has a solution. / Richard

Hi again!
I've used ovi suite to reinstall prior to a reset, and also after a reset. It makes no difference to the problem
What would happen if I wiped the entire built in mass storage (E? There's lots of folders and files there that seems to be untouched regardless of reset method. Could it make things worse?
Other ideas very welcome!
I'm not at all interested in demo versions of games that come bundled with this phone and all private stuff is backed up.

Some problems I have with my Curve 9300. Hope you can help me.

Hi everyone.
I decided to post here to know if someone can help me out, I'm a blackberry curve 9300 user - O.S. 6, I've had the smarthpone for a while now, but since the beginning I've been having some minor details, I want to know if there's a simple solution for those things.
1. Browser.
Since the beginning, the phone native browser has this problem where it starts to load a page but at the middle it just stops and goes back to the home page, so that I can't load any page. I have to search for another browser which works just fine, but maybe there is something I can do to solve this since youtube or othe pages only load on the BB browser and as I said, it doesn't load the pages. It doesn't promp any error message or anything.
2. Don't-know-what-it's-for Icon.
For a few months now, there's this icon that I can't tell what it's for, I've already search all over the APP for updates but nothing, I just decided to coexist with the icon as it never goes away. Maybe there's something I'm not doing right to check the icon. Here's a screen capture of the mentioned icon.
[IMG]http://i45.tinypic.com/10f252b.png[/IMG]
RL=http://imageshack.us/photo/my-images/521/captureit25042012191027.png/][IMG]http://img521.imageshack....
Uploaded with [URL=http://imageshack.us]ImageShack.us[/URL]
3. Crazy pointer.
Sometimes, not always, the pointer just go mad, it start to move by itself, and when one tries to write it becomes impossible, I've tried changing the sensitivity of the pad but no changes.
Thanks in advance for any advices you can give me.
Solved!
Go to Solution.

Awesome! You should now be fine for those two... my guess is the crazy pointer may just be due to an over-sensitive trackpad (usually happens when the trackpad gets covered in skin oils). Try cleaning it once in a while with a soft cloth to remove any finger oils and that should help with that.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Problems with the E2500 firmware update

I already updated the firmware but all the times there is an interruption in the power electricity supply (and unfortunately we are having too many here ...) I'm loosing the wi-fi signal. When the power electricity is back, the wi-fi network name is not even appearing in the list of available wi-fi.
To restablish the signal I need to take out the power cable for at least 10 seconds and connecting again. It's poping up a Management Mode / Firmware upgrade window and then I need to follow the procedure for the firmware upgrade again. When finishing the process, the wi-fi is available again (I do not need to define anything else, the wi-fi name / password / ... are the same it used to be). sometimes I need to follow this procedure more than once ...
But sometimes is not enough and I need to reset the router, take out the power cable for at least 10 seconds, connecting again ... Interesting to mention tha the wi-fi name / password / ... are already ok (the reset is not affecting such definitions).
But I need to follow nthios procedure two or three times a week due the power electricity issues.
My conclusion is that the firmware upgrade is bringing this issues. What can I do to avoid this problems?

Just to give more information about the comments received and the existing situation:
- the router was always connected to a surge protector
- the surge protector was always connected to a voltage stabilizer
In addition I tried all the suggested corrective actions, including downloading again the FW file.
Nothing is solving / changing the situation.
The UPS would be expensive to be installed for a home use.
The warranty is already expired and I'm leaving outside the USA.
I'm lossing too much time to re-established the wi-fi router set up.... Sometimes I need to try several resets before the Management mode / firmware upgrade windows is poping up.
That seems I'll need to buy a new router. Perhaps I'll need to try a different brand.
If you would have any different approach to betaken, please, let me know.
Thanks all of you for the support provided.
Regards

Weird problem i have with JTextField

I have a weird problem with this code...
if
JTextField.setText("value")
then why is
JTextField.getText() == "value"
false?
Can somebody please tell me why this happens....
The applet below illustrates the problem
public class help extends javax.swing.JApplet {
private javax.swing.JTextField Sample;
public help() {
initComponents();
DemonstrateProblem();
public void DemonstrateProblem()
System.out.println(Sample.getText());
if(Sample.getText() == "value")
System.out.println("This is what you think will happen");
else
System.out.println("But instead you end up here");
System.out.println("Why????");
private void initComponents()
               Sample = new javax.swing.JTextField();
               Sample.setText("value");

Thanks for the help...
I didn't realize that by using "==" i was comparing the objects and not the strings they contained.. (did i get that right??)
anyways i used your suggestion and now it works....
I am posted my new code for thoose who may want to learn from my mistake
public class help extends javax.swing.JApplet {
private javax.swing.JTextField Sample;
     private java.lang.String StrSample;
public help() {
initComponents();
DemonstrateProblem();
public void DemonstrateProblem()
          System.out.println("This is what Sample =");
System.out.println(Sample.getText());
          System.out.println("This is what StrSample =");
          System.out.println(StrSample);
if(StrSample.equals("value"))
System.out.println("This is what you think will happen");
else
System.out.println("But instead you end up here");
System.out.println("Why????");
private void initComponents()
               Sample = new javax.swing.JTextField();
               Sample.setText("value");
               StrSample = Sample.getText();

HT4623 How can I solve the Bluetooth problem I have with Code 28

I am having problems with Bluetooth Peripheral Device drivers not installing Code 28, any advise.

You might want to ask in the MBP area as well. And there are a number of issues with networking, support for IPv6 (I would disable rather than use Automatic setting) and whether you use Airport or not.
Take a look on
http://www.macfixit.com
http://www.macintouch.com
where they have some articles - and search Apple Support if this continues. In the meantime, might want to reboot your router and check your settings.

Where do I send a long list of problems I have with non-functionality with the Lion OSX and new Safari for Lion.

In the past two weeks I have been documenting my Lion problems.
First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by people who do not compare long lists in windows comparing files between versions of projects ... the click to next screen is NOT equal to arrows.
Second, Finder Redreaw - doesn't. Move files to a fold, if there are a lot of files, they image of the files being moved remains in finder (see attached screen capture) until Finder is restarted and if COPY function is running. last files in Copy queue are not copied.
Screen capture 5 minutes after moving files to a folder - the selected file images are still in Finder after the move was completed.
Third, it is SLOW, particularly going to an "Attach file" in email, drawing the content of a folder to select an attachment is long enough for me to go to the kitchen, get a drink and come back. Just like the old days of OS7.
Fourth, shifting/recentering screen away from where I am working. Several programs, browsers, Adobe Photoshop/inDesign, and dear old Pages re center my screen - not to the center, but if I choose 30 of 70 images in a folder, it will shift … somewhere else in the folder instead of where I just clicked. If I am working on a document in inDesign or PhotoShop it will do the same - the cursor and screen drift elsewhere to find something it has been amused by. Sometimes it is a word, or a file, but often it is off the pastboard and on the etherial pasteboard on which the pages sit. Or if I'm zoomed in on an image, it moves to somewhere else.
I use a mouse and keyboard, both Apple wireless. I do not use a trackpad, but have a tablet/stylus I am afraid to put into the mix until this crap is stopped.
Fifth, SAVE AS… is gone. You must unlock, duplicate and edit the duplicate … and must rename it in Finder, or use EXPORT to save as the same format under a new name. SAVE AS… worked. Not broke, why fix it?
Personal Comment: The problems seem to be the triumph of coked up software engineers ooohing and aaahing over "Wouldn't it be cool if..." Cool, if they were Microsoft, and required everyone change how they have worked on Macs for the past (almost) three decades. Triumph of brainstorming over functionality.
Sixth, I can't use Cocoa Booklet, but that really started in OSX 10.6 "Snow Leopard". Most of my X11/Cocoa programs stopped worked about that time. Apple is no longer supporting "open source"?
But Wait! There's More...
Seventh, Tonight, trying to download a 1.7 gig archive onto a disk where 280 Gigs were supposedly free, it would not download because, according to the wonderful new Safari and the wonderful new Lion, there is not enough disk space to download a 1.7 gig file in a mere 280 Gigs of free space.
I might be able to move Snow Leopard onto the iMac, but my deciding factor was that Apple, in its wisdom, decided to make iBook Author unable to run under Snow Leopard. So moving to Snow Leopard means I have lost the ONLY benefit I get from the new computer and the new system.
This really stinks.

bigbookjoe wrote:
In the past two weeks I have been documenting my Lion problems.
First, Arrows gone from finder windows; makes it difficult in comparing long lists of files in folder, or compare documents when reviewing line by line. This is obviously a change by people who do not compare long lists in windows comparing files between versions of projects ... the click to next screen is NOT equal to arrows.
Second, Finder Redreaw - doesn't. Move files to a fold, if there are a lot of files, they image of the files being moved remains in finder (see attached screen capture) until Finder is restarted and if COPY function is running. last files in Copy queue are not copied.
Screen capture 5 minutes after moving files to a folder - the selected file images are still in Finder after the move was completed.
Third, it is SLOW, particularly going to an "Attach file" in email, drawing the content of a folder to select an attachment is long enough for me to go to the kitchen, get a drink and come back. Just like the old days of OS7.
Fourth, shifting/recentering screen away from where I am working. Several programs, browsers, Adobe Photoshop/inDesign, and dear old Pages re center my screen - not to the center, but if I choose 30 of 70 images in a folder, it will shift … somewhere else in the folder instead of where I just clicked. If I am working on a document in inDesign or PhotoShop it will do the same - the cursor and screen drift elsewhere to find something it has been amused by. Sometimes it is a word, or a file, but often it is off the pastboard and on the etherial pasteboard on which the pages sit. Or if I'm zoomed in on an image, it moves to somewhere else.
I use a mouse and keyboard, both Apple wireless. I do not use a trackpad, but have a tablet/stylus I am afraid to put into the mix until this crap is stopped.
Fifth, SAVE AS… is gone. You must unlock, duplicate and edit the duplicate … and must rename it in Finder, or use EXPORT to save as the same format under a new name. SAVE AS… worked. Not broke, why fix it?
Personal Comment: The problems seem to be the triumph of coked up software engineers ooohing and aaahing over "Wouldn't it be cool if..." Cool, if they were Microsoft, and required everyone change how they have worked on Macs for the past (almost) three decades. Triumph of brainstorming over functionality.
Sixth, I can't use Cocoa Booklet, but that really started in OSX 10.6 "Snow Leopard". Most of my X11/Cocoa programs stopped worked about that time. Apple is no longer supporting "open source"?
But Wait! There's More...
Seventh, Tonight, trying to download a 1.7 gig archive onto a disk where 280 Gigs were supposedly free, it would not download because, according to the wonderful new Safari and the wonderful new Lion, there is not enough disk space to download a 1.7 gig file in a mere 280 Gigs of free space.
I might be able to move Snow Leopard onto the iMac, but my deciding factor was that Apple, in its wisdom, decided to make iBook Author unable to run under Snow Leopard. So moving to Snow Leopard means I have lost the ONLY benefit I get from the new computer and the new system.
This really stinks.
http://www.apple.com/feedback/macosx.html

Please help with a problem I have with Re-Exporting Video

Hi to all Encore and Premiere users.
I will try to make this as clear as possible.
I have made 2 very short movies in Premiere and exported them for use in Encore.
I have made a project in Encore using both of these short movies on 2 timelines and all is fine.
I then decided I would like a 30sec introduction to one of them which I have made using After Effects.
I have imported this short introduction into Premiere and placed it at the beginning of one of the Movies, checked all is well and then Re-Exported it over writing the original file, and all appeared to be OK
Moving back into Encore I opened the project and previewed this movie but found that 30sec from the end it stopped, checking the end of the timeline I found that approx 30sec of video and audio was missing.
Encore would not allow me to delete the movie, or import it as a new asset.
I went back into Premiere and Exported again and every frame appeared to go through OK.
But found the same result in Encore.
Can anyone help me with ideas of what could have gone wrong?
Best Regards
Allan

Hi Jo
I tried that, result was No Video, only Audio until I paused then a still picture appeared. Start to play again, No Video,only Audio, very strange.
In the end I had to delete everything with regard to this clip, and save project.
Opened project again and imported Audio and Video, set up new time line and all is working fine now.
On refection it would appear that the 30sec into I introduced at the beginning of the film knocked of 30sec at the end of the Video for reasons which are totally unknown to me.
All is well now and thank you for your help.
Best Regards
Allan

TS1814 Does anyone know how to sort out an a problem i have with updating my iPhone "an unknown error occurred (1602) can anyone help?

I have an error message on my laptop which says " Unknown error occured (1602)" anyone know how to get past this?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

2 problems i have with my N82 (Firmware Update, As...

Similar Messages

Maybe you are looking for