2 problems w/ Yosemite I loaded today
Installed Yosemite today. Any advice on 2 issues?
1. My "stoplights: are just dark spots, no color or markings.
2. iMessage is not working with non-Mac phones.
Can someone help, please?????
bb
David-
The only way to troubleshoot the display at this point is to hook it up to another computer and see what happens. Combined with your second problem it certainly would appear as though this could be a problem with the graphics card. You could take a look at the error logs and see if anything interesting is there.
I would invoke AppleCare if all possible. When a Power Mac fails it can be expensive to repair. If something is failing now it would it not be better just to get it repaired and have no more worries? The nice thing is that the AppleCare covers your monitor as well.
Luck-
-DaddyPaycheck
Similar Messages
-
Hi there,
Does anybody know if anything is going to be done regarding the mail problem on Yosemite?
this was a recurring on Maverics too...
Since i updated to Yosemite, mail does not work well on my iMac, i cannot get my mail... but i can send mail.
it does not seem to connect properly to my Pop account.
my mail does work well on my iPhone and other devices.
it was fine after the recent Yosemite update, and now it's back... and very frustrating,
is there anyone who can help ? or anyone at Apple that is going to fix it for once and for all ?
Thanks.Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Please help, xinit/startx problems when attempting to load Gnome 3.
I'm relatively new to Arch, but I'm loving every minute of it.
I'm here today to ask you to help my troubleshoot a simple problem that's caused me plenty of headaches.
I've never had the ability to install ANY Graphical interface on my actual computer, even after countless reinstalling and configuring although oddly enough it works perfectly fine on my Virtual Machine.
I personally think it might be to do with a corrupt package but like I said I'm new and I have completely no idea.
First off I've installed:
All of the xorg packages, xorg-xinit, Gnome Gnome-extra, Pulseaudio, gdm(I have no idea what it does, but it's been recommened).
Errors:
Input: startx
Output: nothing
Input:gnome-session
Output: **(gnome-session:1076): WARNING **: Cannot open display:
If you require information, feel free to ask I'll try and be as prompt as I can.
I'll be forever in dept to ever can help me, this has not been working for days.
Last edited by Compulsed (2011-08-24 11:55:15)Shark wrote:
.xinitrc file is in
/home/yourusername/.xinitrc
If you don't have it issue this command:
cp /etc/skel/.xinitrc ~/
and insert:
exec ck-launch-session gnome-session
Then run startx
And be carefull that you are logged in as a USER not as a root!!!
Amazing instructions, I think it might be to do with my drivers(same problem). I'm just going to do a clean reinstall and see how it goes when i do it the CORRECT way.*
As that didn't seem to fix the problem with startx not loading.
Last edited by Compulsed (2011-08-24 13:25:31) -
Problem with module lazy loading in flex 3
Hi every body!
I have some problems with Module lazy loading. I am using flex 3.5, Module-flex3-0.14, parsley 3.2.
I can't get the LazyModuleLoadPolicy working correctly.
In my main application (the one that loads the modules), my parsley context is the following:
<cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ OpenViewMessage }" />
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }"/>
<cairngorm:ParsleyModuleDescriptor objectId="test"
url="TestModule.swf"
applicationDomain="{ClassInfo.currentDomain}"
/>
And to load my module:
[Inject(id="test")]
[Bindable] public var test:IModuleManager;
<core:LazyModulePod
id="moduleLoader"
moduleManager="{test}"
moduleId="testModule"
/>
with LazyModulePod.mxml:
<mx:Canvas
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:module="com.adobe.cairngorm.module.*"
xmlns:parsley="http://www.spicefactory.org/parsley">
<mx:Script>
<![CDATA[
import com.adobe.cairngorm.module.ILoadPolicy;
import com.adobe.cairngorm.module.IModuleManager;
[Bindable]
public var moduleId:String;
[Bindable]
public var moduleManager:IModuleManager;
[Bindable]
[Inject(id="lazyLoadPolicy")]
public var lazyLoadPolicy:ILoadPolicy;
]]>
</mx:Script>
<parsley:Configure/>
<module:ViewLoader id="moduleLoader"
moduleId="{ moduleId }"
moduleManager="{ moduleManager }"
loadPolicy="{lazyLoadPolicy}">
<!--<module:loadPolicy>
<module:BasicLoadPolicy/>
</module:loadPolicy>-->
</module:ViewLoader>
</mx:Canvas>
OpenViewMessage.as in a swc:
public class OpenViewMessage
private var _moduleId:String;
private var _viewId:String;
public function OpenViewMessage(moduleId:String, viewId:String)
this._moduleId = moduleId;
this._viewId = viewId;
public function get viewId():String{
return _viewId;
[ModuleId]
public function get moduleId():String
return _moduleId;
In another flex project, my module context is:
<mx:Object
xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:controler="com.cegedim.myit.controler.*">
<controler:WindowControler/>
</mx:Object>
The module implements IParsleyModule
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical"
implements="com.adobe.cairngorm.module.IParsleyModule"
xmlns:spicefactory="http://www.spicefactory.org/parsley">
<mx:Script>
<![CDATA[
import org.spicefactory.parsley.flex.FlexContextBuilder;
import com.adobe.cairngorm.module.IParsleyModule;
public function get contextBuilder():ContextBuilderTag
return contextBuilderTag;
]]>
</mx:Script>
<spicefactory:ContextBuilder id="contextBuilderTag" config="{ MyITTestModuleContext }"/>
<spicefactory:Configure/>
</mx:Module>
and the WindowControler:
public class WindowControler
public function WindowControler(){}
[Init]
public function initialize():void
Alert.show("Module Initialized");
[MessageHandler(scope="local")]
public function openViewMessageHandler(message:OpenViewMessage):void
Alert.show("Opening view " + message.viewId + " in the module " + message.moduleId);
If i uncomment the basicLoadPolicy in LazyModulePod.mxml and remove the lazyModuleLoadPolicy, everything works fine. The module is loaded when it's added to stage and it receives correctly messages dispatched to it. But with the lazy policy the module never loads.
I may have missed something or there is somthing i don't understand because i tried the ModuleTest provided in example in cairngorm sources. It works fine (i mean loading the moduleA2 when receiving a message), but if i replace the change the lazyModulePolicy to listen to broadcasted messages instead of a pingMessage, the module never loads too.
<cairngorm:LazyModuleLoadPolicy objectId="lazyLoadPolicy" type="{ BroadcastMessage }" />
<cairngorm:ModuleMessageInterceptor
type="{ BroadcastMessage }" moduleRef="moduleA" />
public class BroadcastMessage
public function BroadcastMessage()
If someone has any clue, i'll be happy to test it =)
Thanks.Hello, back on my issue, i tested a little bit more the message dispaching.
I read the lazyLoadPolicy class and noticed that it always has to have a ModuleId property in the message to work, that's why the broadcast message didn't work to awake the module with the lazy loading policy.
So i added copy of my module:
<cairngorm:ParsleyModuleDescriptor objectId="test"
url="TestModule.swf"
applicationDomain="{ClassInfo.currentDomain}"
/>
<cairngorm:ParsleyModuleDescriptor objectId="testbis"
url="TestModuleBis.swf"
applicationDomain="{ClassInfo.currentDomain}"
/>
Set them both with a basicLoadPolicy, and tries to dispatch a message to only one of them using the ModuleId metatag. I then noticed that both modules received the message and not only the one i expected.
I then changed the ModuleMessageInterceptor configuration to dispatch to only one kind of module:
<cairngorm:ModuleMessageInterceptor type="{ OpenViewMessage }" moduleRef="test"/>
and this worked as expected. Only the first module catched the message. I am obiously messing with the ModuleId metatag but i cannot see what's wrong...
I compiled with
-keep-as3-metadata+=ModuleId
but this hasn't changed anything... -
Problem while trying to load or access OracleTypes.CURSOR value
Hi all,
I configured my datasource as follow
URL: jdbc:oracle:thin:@192.10.1.230:1521:interp
Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource
an my namedquery is
+@NamedNativeQuery(name = "generaFoliosRenCot",+
*+ query = "{ ? = call pkg_renovaciones.fn_rencot_auto(:ageid) }",+*
*+ resultClass = FoliosGenerados.class,+*
*+ hints = { @javax.persistence.QueryHint(name = "org.hibernate.callable", value = "true") })+*
I'm using
<org.springframework.version>3.0.5.RELEASE</org.springframework.version>
<org.hibernate.version>3.5.4-Final</org.hibernate.version>
<com.oracle.jdbc.version>10.2.0.4.0</com.oracle.jdbc.version>
Weblogic 10.3.4
when i run my app on junit its run fine
but when i run my app on weblogic server the problem is when i call a function on oracle 9i the error is:
+*[02/08/2011 10:00:00 ERROR ServiceThrowsAdvice:doRecoveryActionDataAccess:26] - :::: ** ::::Problem while trying to load or access OracleTypes.CURSOR value; nested exception is org.hibernate.HibernateException: Problem while trying to load or access OracleTypes.CURSOR value*+
+*org.springframework.orm.hibernate3.HibernateSystemException: Problem while trying to load or access OracleTypes.CURSOR value; nested exception is org.hibernate.HibernateException: Problem while trying to load or access OracleTypes.CURSOR value*+
at org.springframework.orm.hibernate3.SessionFactoryUtils.convertHibernateAccessException(SessionFactoryUtils.java:679)
at org.springframework.orm.hibernate3.HibernateAccessor.convertHibernateAccessException(HibernateAccessor.java:412)
at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:411)
at org.springframework.orm.hibernate3.HibernateTemplate.execute(HibernateTemplate.java:339)
at mx.grupocp.inter.model.dao.impl.FoliosGeneradosDaoImpl.generaFoliosRenCot(FoliosGeneradosDaoImpl.java:28)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
at org.springframework.aop.aspectj.AspectJAfterThrowingAdvice.invoke(AspectJAfterThrowingAdvice.java:55)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202)
at $Proxy206.generaFoliosRenCot(Unknown Source)
at mx.grupocp.inter.controller.scheduler.jobs.impl.ExecuteShellsImpl.generaFoliosRenovCot(ExecuteShellsImpl.java:86)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:183)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.aspectj.AspectJAfterThrowingAdvice.invoke(AspectJAfterThrowingAdvice.java:55)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.aspectj.AspectJAfterThrowingAdvice.invoke(AspectJAfterThrowingAdvice.java:55)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.aspectj.AspectJAfterThrowingAdvice.invoke(AspectJAfterThrowingAdvice.java:55)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
at org.springframework.aop.interceptor.AsyncExecutionInterceptor$1.call(AsyncExecutionInterceptor.java:80)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.lang.Thread.run(Thread.java:619)
*+Caused by: org.hibernate.HibernateException: Problem while trying to load or access OracleTypes.CURSOR value+*
at org.hibernate.dialect.Oracle9Dialect.registerResultSetOutParameter(Oracle9Dialect.java:308)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1609)
at org.hibernate.loader.Loader.doQuery(Loader.java:717)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:270)
at org.hibernate.loader.Loader.doList(Loader.java:2294)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2172)
at org.hibernate.loader.Loader.list(Loader.java:2167)
at org.hibernate.loader.custom.CustomLoader.list(CustomLoader.java:316)
at org.hibernate.impl.SessionImpl.listCustomQuery(SessionImpl.java:1832)
at org.hibernate.impl.AbstractSessionImpl.list(AbstractSessionImpl.java:165)
at org.hibernate.impl.SQLQueryImpl.list(SQLQueryImpl.java:179)
at mx.grupocp.inter.model.dao.impl.FoliosGeneradosDaoImpl$1.doInHibernate(FoliosGeneradosDaoImpl.java:34)
at mx.grupocp.inter.model.dao.impl.FoliosGeneradosDaoImpl$1.doInHibernate(FoliosGeneradosDaoImpl.java:29)
at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:406)
... 37 more
+*Caused by: java.lang.IllegalAccessException: Class org.hibernate.dialect.Oracle9Dialect can not access a member of class oracle.jdbc.driver.OracleTypes with modifiers ""*+
at sun.reflect.Reflection.ensureMemberAccess(Reflection.java:65)
at java.lang.Class.newInstance0(Class.java:349)
at java.lang.Class.newInstance(Class.java:308)
at org.hibernate.dialect.Oracle9Dialect.registerResultSetOutParameter(Oracle9Dialect.java:306)
... 50 more
please help meHi,
Have a look at this tread:
Re: Problems of hibernate calling oracle stored procedure
Regards peter -
Problem with flat file loading/Special characters
Hi, All,
We just migrated from Version 3.0B to BI7.0, and I've a problem which I can't handle for the moment. We are in Unicode, current codepage of the server is 4103 and codepage of frontend is 4110 (from SNL1 Transaction).
I'm loading czech texts in my material, via CSV files. The CSV file is correct on my PC, I see the special characters.
The problem is on my loading, whatever Character set I choose in the Infopackage (I choose Standard or Character Set Setting User-dependant), I cannot see the good characters.
Does any one of you already encounter this kind of problem, and, if yes, how did you solve it ?
Thankshi,
check out with your flat file letter's type, if it's in lower case letter's change them in
upper case letter's. or otherwise change the infobject's type as-- select check box
corresponding to lower case letter's in infoobject.
if helpful provide points
regards
harikrishna.N -
Problem with LILO to loading the OS
Hello everyone.
We have a problem with LILO to loading the OS in a CS-MARS 110R, find attached a screenshot.
The only solution is recovery the MARS Operating System.
Thanks in advance.
Regards
AntonioHi Matthew.
The re-image was impossible because this CS-MARS didn´t read the DVD correctly (hardware error) and we asked to Cisco a RMA.
Thanks
Antonio -
Strange email problem; it started only loading unread emails, but from 3 months ago. It is now loading new emails too, but no emails in the past month, read or unread. It's gmail, set up through the phone, I've restarted restored and updated firmware, deleted the account, anything I could think of, but it's just not accurately downloading the most recent emails.
The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.
-
Problem with whitespace then loading and saving xml
i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4. load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object must either be an instance of a DisplayObject or a Class object representing an embedded asset. URLRequest objects cannot be used. The width and height of the inline graphic at the time the line is created is used to compose the flow.
- robin -
GenericServiceFactory initialization problem when trying to load Web servic
Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advanceHi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger -
How can I end this annoying problem of YouTube not loading?
Hello y'all!
Relatively new to the Mac world here, so go easy on me! How can I end once and for all, this problem with YouTube not loading in Safari and not being able to watch embeded videos? I've read various "fixes" and have tried them all, and nothing seems to work. Help!! Thanks!We have no way of knowing exactly which "fixes" you are referring to...
Try deleting Flash cookies. http://machacks.tv/2009/01/27/flushapp-flash-cookie-removal-tool-for-os-x/
Try uninstalling then reinstalling the Flash plugin. http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
Your profile shows you are running v10.6.7. Of that is correct, update your software. Click your Apple menu (top left in your screen) then click Software Update...
Repair Permissions using Disk Utility. /Applications/Utilities -
Massive sound problems in Yosemite
Hi,
I have been experiencing massive sound problems with Yosemite. It basically effects everything except the sound control in the control centre.
What happens:
I can't control the sound volume anymore. Key board sound control does not respond (sound symbol is struck out), sound bar in menu bar in greyed out.
If sound symbols are not greyed out, the sound will stay on the level it currently is. Neither key board nor menu bar icon can change the volume.
When it happens:
When I plug/un-plug headphones.
When I use iTunes. iTunes will even stop playback... the only chance to get iTunes back to normal is restarting the app.
When I use Skype.
Occasionally on any incident... there is no app in particular linked to this.
What I do to get around it:
Restarting the mac... this will help until I sent my Mac to sleep or do any of the things above.
Accessing sound control via the control centre (which is work around, yet very annoying).
Killing sound via terminal does not do anything.
Btw. there is only one thing listed in the sound input/output menu.
This problem is very annoying and occurs several times daily, especially since I work a lot with sound and music. I know this an weary argument, but considering what I paid for this machine ... bla bla bla... I need a fix.
Thanks for any advice.
AndyHi,
Thanks for your reply.
Yes, I have. It works pretty much like any re-start does. As soon I use headphones or send my Mac to sleep, it goes back to unresponsive sound control.
Edit: Just tried it again and it didn't do anything. Key board sound control is still greyed out...
Any other suggestions? -
Problems installing yosemite on imac
problems installing yosemite on imac
Okay :-/ I messed up the post. But this did make me smile and I have reposted my problem.
-
Have a problem ... not loaded project. working on it for 8 months. never was nothing like this either with him or with other projects. When you load a project Premier generates an error .{ Premier pro has encoutered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k] } Create the eve autosave project also not loaded. When I sav'd the project for the last time about the Premiere pro me warned about any problems and save projects without any problems. It is only one thing was unusual in the program - the timeline when switching between sikventsy constantly dropped as user's settings. And as usual. I tried to load the project from another computer. Import the project into the after Effects . import the project into a new project about Premier pro. But it did not solve the problem. all the time the error. Please help, a lot of work in this project. This is a great betrayal of the Premier pro...
Hi Pochtawood,
Yes, uninstalling iCloud will allow you to create new projects.
For legacy projects, you can repair them with a patch created by a user.
Details and links to the patch are here: Re: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
Thanks,
Kevin -
Process chain not loaded today and yesterday
Hello all,
I scheduled PC daily, but today i realized that PC is not loaded today and yesterday.
how can i analyze further for missing today and yesterday load.
Regards,
RangaCheck in sm37 if you process chain was triggered or not. If it was triggered, whether it finished successfully or not.
If everything looks fine here, go to WE02 in your source system to check if any idocs have failed. If the idocs are posted succussfully, check in sm37 here if you job for dataload got completed succesfully or not.
Maybe you are looking for
-
Select multiple LOV values & display in a grid
How to implement an LOV where user can select any multiple values and these values will be displayed in a grid?
-
[Solved] wine: restricting execution to specific user/group safe?
From what I understand, the way of exploiting a bug in a browser and launching malware in the background won't work with wine as the malware injector calls "some.exe", not "wine some.exe". So using wine is safe unless the person is "dumb" enough to e
-
Dear Users, I have compiled the MySQLConn class and the ArticleData Class. When i try to compile the ArticleManager Class, this error comes up. I am stuck and do'nt know what is wrong, the compiler or the code sumwhere. I hope to get some experience
-
ADSL2+ is possible but isn't being supplied - plea...
Hi Mods et al. I'm a long time sufferer of unnecessarily slow download/upload speeds. With Virgin Media I happily received 18-19MB DL and the full 1.3MB UL speeds you should expect with the exchange on your doorstep. However after I switched to BT af
-
Hi- I'm running an Xserve ( new intel build) , using OS X server 10.5.5. I can send mail from one user to another from within the domain. I can also receive email form the outside world. however, I cant email out. SMTP log file reports the following