2 process of IDVD not working (Activity Monitor)

Sorry, found a post with the same problem and without a solution. Since I can't delete this, please take a look at:
http://discussions.apple.com/thread.jspa?messageID=1727581??
Message was edited by: Quiroga

Your link seems broken, but other readers should know that iDVD and its helper applications often appear as "not responding" in Activity Monitor. This is not something to worry about, do not force-quit iDVD just becasue of this.
"Not responding" just means iDVD is too busy to answer queries from Activity Monitor.....

Similar Messages

  • How do i stop two processes that are running in activity monitor

    how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

    Select each one and Force Quit it.
    But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
    regards

  • IDVD not working right with Snow Leopard...a possible fix

    I was having the following issue with iDVD and my new fresh install on a new hard drive of snow leopard 10.6.4:
    iDVD would open to the screen where you chose what you want to do
    I would click create a new project and get to name it
    Nothing would happen but I knew the program was still running. I could see it in the activity monitor
    I would go to quit iDVD and it would ask me to save changes and the beach ball would start spinning and I would have to force quit from the dock
    Then I found this post after looking litterally all day for a fix....these instructions worked for me and my iDVD is now working normally...
    (1) Go this folder:
    /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Framew orks/
    (2) There should be 3 aliases there:
    ImageIO.framework
    ImageKit.framework
    QuartzComposer.framework
    (3) In my case, the QuartzComposer.framework was actually a folder. I removed this and created a new alias to
    /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzComposer .framework
    After making the new alias, iDVD now works just fine. Not sure why this frameworks folder had become damaged like this. I am hoping that there are no negative effects on any of my other applications, but I've kept a backup of the original folder just in case.
    I moed the quartzcomposer folder to 2 levels back and made an alias and put it in the A/frameworks folder and viola...iDVD worked for me! I am a happy mac user now

    Thanks, had exactly the same problem.
    Switched to administrator
    $ su adminusername
    Navigated to the folder
    $ cd /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works
    Listed the contents of the folder
    $ ls -le@
    Renamed the folder QuartzComposer.framework
    $ sudo mv QuartzComposer.framework/ QuartzComposer.framework.old/
    Replaced with a symbolic link to the correct framework
    $ sudo ln -s /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works
    iDVD works!!!

  • Process Success Message not working

    Hi
    I have created a process to send a mail on some button click...
    The process success message i have given that
    Mail Sent Successfully!
    Though the mail is coming I am not getting the Mail Sent Message!
    Can someone help to let me know what am I missing?
    Thanks
    Ankit

    Ok another fishy question
    Can a process sent a Successful Message without completing the task?
    I get the message Mail Sent though I never receive the mail...
    In test environment apex.oraclecorp.com it is working sending the mail.
    But in production database.us.oracle.com it is not working :(
    I have made the exact copy in production site!
    What can i be missing?

  • Process Trigger is not working in OIM 11gR2

    Hi Experts,
    The Lookup.USR_PROCESS_TRIGGERS is not working. Assigned some process task on user attribute changes but it is not working as of now. Earlier it was working fine. Even I am not able to update the existing lookup value in Lookup.USR_PROCESS_TRIGGERS as we are getting below errror:
    The security level for this data item indicates that it cannot be updated.
    We are not able to figure out what is the issue behind this. might be some sandbox issue or some database value problem.
    Please provide me pointer to solve my problem.
    Thanks,

    Select LKV.LKV_DATA_LEVEL from LKU LKU, LKV LKV where LKU.LKU_KEY = LKV.LKU_KEY AND LKU.LKU_TYPE_STRING_KEY='Lookup.USR_PROCESS_TRIGGERS'
    If it is 1, make it 0 and try again. No need to change it for OOTB tasks/rows.

  • ERecruiting:Process Template link not working

    Hi All,
    Recently we have applied a patch "nw eph1 sp05" after which the Process template link is not working.
    We have raised an OSS note in this regard and they have a provided Note 1342091 to apply.
    We have implemented that note and found that the Process Template link is working, but it is failing in one place:
    Recruiter start page>View/Manage Candidates within Requisitions>Assignments>Select candidate and click on the 'Process Activities' button>click on the Process Template link
    When we click on the Process template link a blank page appears.
    However we have replied back to them, meanwhile I would like to know if anybody have faced any similar issue can provide some ideas in this regard.
    Thanks,
    PoojaM

    The issue has been resolved.

  • Sap document link on process chain is not working

    Hi all,
    This link is not working
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045.
    Please give me the correct like for the sap document on process chain.
    Thanks,
    Madhu

    Hi Madhu,
    Go through the below wiki where you will get most information related to Process chains.
    https://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
    Process chain creation step by step
    /people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
    Process chain Scheduling
    /people/debjani.das/blog/2009/04/05/scheduling-process-chain
    New features in BI process chains
    /people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
    However, if you are looking for the process chain from a SAP BI perspective, then please check the below link:
    http://help.sap.com/saphelp_nw04/helpdata/EN/8f/c08b3baaa59649e10000000a11402f/content.htm
    Hope this links helps
    Regards
    KP

  • Magic iDVD Not Working

    Some strange issues with Magic iDVD. If I click the Magic iDVD button on the iDVD start window the window closes and no project comes up, if I go and Quit iDVD the window appears and asks me to save project *Magic iDVD*.idvdproj. Now if I open iDVD create a blank project close the project then click magic iDVD it works with no problems. Anyone have any ideas?

    Its somehow related to:
    http://discussions.apple.com/thread.jspa?threadID=313109&tstart=45
    I had the same problem. when I removed all the .avi files from my "Movies" folder (~/Movies) Magic iDVD worked as advertised.
    You should also remove the iDVD folder in /home/Library/Application Support/
    Hope this helps.
    V
    Some strange issues with Magic iDVD. If I click the
    Magic iDVD button on the iDVD start window the window
    closes and no project comes up, if I go and Quit iDVD
    the window appears and asks me to save project *Magic
    iDVD*.idvdproj. Now if I open iDVD create a blank
    project close the project then click magic iDVD it
    works with no problems. Anyone have any ideas?

  • Parallel processing of BPEL not working

    Hi,
    I am using FlowN activity to invoke different BPEL process in parallel. In audit trail ->Flow tab, they are depicted as executed parallel, but if I see the time-stamp of their execution; each process is executed one after other.
    Sub bpel process inserts data into different tables.
    Using BPEL 2.0, all asynchronous process.
    So does FlowN activity span multiple threads? In composite.xml each sub BPEL process have bpel.partnerLink.partner_link_name.nonBlockingInvoke=true
    <component name="InsertType2" version="2.0">
    <implementation.bpel src="InsertType2.bpel"/>
    <property name="bpel.config.transaction" type="xs:string" many="false">required</property>
    <property name="bpel.partnerLink.partner_link_name.nonBlockingInvoke"
    type="xs:string" many="false" override="may">true</property>
    </component>
    Thanks,
    Bhaskar

    Vijay,
    The process which has FlowN and in each Seqeunce another process is invoked and that sub-process insert data into DB.
    .                                _Process_
                                          |
                                          |
                 _assign activity data to each sub-process_
                                          |
                                          |
                                    FlowN
                                          |
                                          |
        |                                        |                                                |
        |                                        |                                                |
    Invoke BPEL 1             Invoke BPEL 2                          Invoke BPEL 3
    So here 'Invoke BPEL 1', 'Invoke BPEL 2' & 'Invoke BPEL 3' input variable are assigned in single assign activity before FlowN. Let me know do I need to pass the data to each 'Invoke BPEL 1' inside FlowN sequence.
    Thanks,
    Bhaskar Pola
    Edited by: Pola on Apr 19, 2013 9:00 AM

  • Server monitor not working (hardware monitor)

    Just finnished installing my brand new maxed out Intel Xserves. And the Server monitor isn't working.
    This thread:
    http://discussions.apple.com/thread.jspa?messageID=643361
    Didn't solve my problem. hwmond is running on the Xserves but each server line just says "Waiting for response". My /System/Library/ServerSetup/SetupExtras file doesn't even HAVE a Disabled key. It has Label, OnDemand, Program, ProgramArguments and ServiceIPC keys, but no Disabled. And the hwmonds is running anyway.
    I have opened server monitor on the xserve itself and tried to open it to itself with no luck. I have configured Lights out management by choosing Server->Configure local Machine and added another IP there with different login, but I can't connect to either IP. Firewalls are all turned off.
    Running /System/Library/ServerSetup/SetupExtras/hwmondSetup just says "already loaded"
    Server Admin works, I can log in and edit services. Workgroup manager also works.
    When i run the hwmond as root on the server, it says "Failed to communicate with the front panel" which could be due to hwmond already running, but I can't turn off the process since launchd (?) launches it again.
    When I choose "Configure local Machine" the password I entered is always blank, but maybe that's by design.
    Since these servers aren't installed yet I have them in my office and their IP's are temporary, so I read this:
    http://docs.info.apple.com/article.html?artnum=106830
    And it says that for this environment I should set the hostname to "localhost" in /etc/hostconfig. Done. Nothing changed.
    I've googled this and searched here but found nothing. I'm running out of options... What should I do?

    I set the server on a desk and do a fresh install off a DVD with the "erase HD" option. Then I install and configure the software I need (Software update, Sophos, power options, etc.) I did not configure LOM at that point, because I wasn't sure how to do it, and I needed to deploy the server. (luckily LOM was easy enough to set up after it was deployed.) Once the server is ready, I connect a FireWire HD to it, which has OS installed on it and boot from that.
    That way my server is just an attached disk, and I use Disk Utility to create an image of it, which I then deploy on other servers.
    I've had an issue with the G5 XServes where such a method required relatively simple modification before the server monitor would work:
    http://docs.info.apple.com/article.html?artnum=301046
    But, I've not had to do that with the Intel XServes.

  • Simple invoking BPEL process from JSP not working

    Hello Everybody,
    I'm trying to invoke a BPEL process from a client JSP. I'm following the tutorial 7 Invoking the BPEL processes.
    I'm trying to use the same tutorial for a different application.
    Here is my WSDL snippet.
    <types>
    <schema attributeFormDefault="qualified"
    elementFormDefault="qualified"
    targetNamespace="http://www.arcwebservices.com/v2006"
    xmlns="http://www.w3.org/2001/XMLSchema">
              <element name="SpatialQueryRequest" type="s1:SpatialQueryRequestType"/>
              <element name="SpatialQueryResponse" type="s1:SpatialQueryResponseType"/>
              <complexType name="SpatialQueryRequestType">
              <sequence>
                   <element name="username" type="string"/>
                   <element name="password" type="string"/>
              </sequence>
              </complexType>
              <complexType name="SpatialQueryResponseType">
              <sequence>
                   <element name="token" type="string"/>
              </sequence>
              </complexType>
         </schema>
    </types>
    <message name="SpatialQueryRequestMessage">
    <part name="payload" element="s1:SpatialQueryRequest"/>
    </message>
    <message name="SpatialQueryResponseMessage">
    <part name="payload" element="s1:SpatialQueryResponse"/>
    </message>
    <portType name="SpatialQuery">
    <operation name="initiate">
    <input message="tns:SpatialQueryRequestMessage"/>
    </operation>
    </portType>
    <!-- portType implemented by the requester of SpatialQuery BPEL process
    for asynchronous callback purposes
    -->
    <portType name="SpatialQueryCallback">
    <operation name="onResult">
    <input message="tns:SpatialQueryResponseMessage"/>
    </operation>
    </portType>
    The JSP code is:
    <%
    String ssn = request.getParameter("ssn");
    //if(ssn == null)
    // ssn = "123-12-1234";
         String username = "jaweed";
         String password = "ibrahim";
    //String xml = "<ssn xmlns=\"http://services.otn.com\">" + ssn + "</ssn>";
         //String xml = "<UserName xmlns="http://www.arcwebservices.com/v2006">" + username + "</UserName><Password xmlns="http://www.arcwebservices.com/v2006">" + password + "</Password>";
         String xml = "<UserName xmlns=\"http://www.arcwebservices.com/v2006\">" + username + "</UserName><Password xmlns=\"http://www.arcwebservices.com/v2006\">" + password + "</Password>";
    Locator locator = new Locator("default","bpel");
    IDeliveryService deliveryService = (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
    // construct the normalized message and send to Oracle BPEL Process Manager
    NormalizedMessage nm = new NormalizedMessage( );
    nm.addPart("payload", xml );
    NormalizedMessage res = deliveryService.request("SpatialQuery", "initiate", nm);
    Map payload = res.getPayload();
    //out.println( "BPELProcess CreditRatingService executed!<br>" );
    out.println( "Token is " + payload.get("payload") );
    %>
    com.oracle.bpel.client.ServerException: IDeliveryService.request() invoked for one-way operation 'initiate'. This method can only be used to invoke two-way operations which return an output message. Please check the WSDL which defines this operation and use the method IDeliveryService.post() to invoke a one-way operation
    But I'm getting an exception. I'm in deep trouble please help me. Urgent

    Yeah ..This is my final project for my masters degree.
    I'm integrating BPEL with GIS(Geographic Information System) webservices provided by ESRI(Arcweb services). My main BPEL process that I built follows this sample example. The problem is that I need to show a working client application within 2 days or else my project is termed as incomplete and my graduation will be postponed to next semester. :(
    I tried your advice, as soon as I add a Java code to my BPEL process, the application is taking longer time to execute in the BPEL console itself.
    <bpelx:exec xmlns:bpelx="http://schemas.oracle.com/bpel/extension" language="java" version="1.4" name="exec-1">
    <![CDATA[setConversationId("output");]]>
    </bpelx:exec>
    So after the thread sleep the webservice is not ready to give its output.
    Just a quick thought, I assumed that if I attach the output of the my Invoke(Client) to a Reply activity,which will make it a two way operation.
    Then I could use,
    NormalizedMessage res = deliveryService.request("SpatialQuery", "initiate", nm);
    will work.
    I assigned the ouput of the Invoke(Client) to the variable in Reply activity.
    But my reply activity is throwing a NULL pointer exception.
    This is my BPEL code:
    <sequence name="main">
              <receive name="receiveInput" partnerLink="client" portType="tns:InvokeTest" operation="initiate" variable="input" createInstance="yes"/>
              <assign name="assign-1">
                   <copy>
                        <from variable="input" part="payload" query="/nsxml0:InvokeTestRequest/nsxml0:username"></from>
                        <to variable="IsaInput" part="parameters" query="/nsxml0:getToken/nsxml0:username"/>
                   </copy>
                   <copy>
                        <from variable="input" part="payload" query="/nsxml0:InvokeTestRequest/nsxml0:password"></from>
                        <to variable="IsaInput" part="parameters" query="/nsxml0:getToken/nsxml0:password"/>
                   </copy>
              </assign>
              <invoke name="invoke-1" partnerLink="Authentication" portType="nsxml0:IAuthentication" operation="getToken" inputVariable="IsaInput" outputVariable="IsaOutput"/>
              <assign name="assign-2">
                   <copy>
                        <from variable="IsaOutput" part="parameters" query="/nsxml0:getTokenResponse/nsxml0:Result"></from>
                        <to variable="output" part="payload" query="/nsxml0:InvokeTestResponse/nsxml0:token"/>
                   </copy>
              </assign>
              <reply name="reply-2" partnerLink="client" portType="tns:InvokeTest" operation="initiate" variable="output"/>     </sequence>
    I really appreciate your patience and help.

  • Data Manager Packeage and Process chain si not working

    Hi All,
    I executed a data manager package which contain a process chain to revaluate the one of my Account dimension meneber Say  "Revenue". I am working on BPC NW 7.0
    steps I followed:
    1. I created a script logic file and created a custom process chain.
        process chain steps:
      a) Start variant
      b) Modify dynamically
      c) Run Logic
      d) Or and Clear BPC tables
    2. This process chain was included in data manager package.
    3. Data manager package was modyfied to include parameters and scipt logic file name.
    4. executed data package
    The issue is " when I execute Data manager Package" I dont get any error but when I View status I dont see any pachage running or completed. If I see Process chain, It is failing at first step of Modify dynamically..no clue?
    Could you please let me know what could be a issue?
    Cheers,
    SAC

    I encounter this problem, Do this Steps:
    I. First,check if your process chain is existing in the Library.
    II.If yes,follow the steps below:
    1. Edata - organize Package - Modify your Package.
    2.Check if you had the correct process chain.
    3.IF yes, Click View package at its right side.
    4.Expand the Task Folder and take note of the Task Name (e.g. ZBPC_PROT_RUN_LOGIC)
    5.click Advance,Compare the task name that you noted in the syntax TASKS
    (e.g. TASK(ZBPC_PROT_CF_RUN_LOGIC,SUSER,%USER%)
    6. It should be the same.
    Running package but not appearing any status happens when the system cannot find your process chain.
    hope this helps,

  • Processing Pattern Example not working?

    I am trying to run the Processing Pattern example for the first time. I'm using the .cmd files provided with the example.
    The server starts up without error and its logs show loading some Processing Pattern TaskProcessor classes:
    2010-09-28 14:30:47.616/4.839 Oracle Coherence GE 3.5.2/463 <Info> (thread=Thread-4, member=1): Starting dispatcher Task Dispatcher Class:com.oracle.coherence.patterns.processing.dispatchers.AbstractDispatcher
    2010-09-28 14:30:47.632/4.855 Oracle Coherence GE 3.5.2/463 <Info> (thread=SimpleEventDispatcher:Thread-2, member=1): DefaultTask Processor Definition Manager starting Class:com.oracle.coherence.patterns.processing.internal.task.DefaultTaskProcessorDefinitionManager
    2010-09-28 14:30:47.632/4.855 Oracle Coherence GE 3.5.2/463 <Info> (thread=Thread-4, member=1): Starting dispatcher Local Dispatcher Class:com.oracle.coherence.patterns.processing.dispatchers.AbstractDispatcher
    2010-09-28 14:30:47.632/4.855 Oracle Coherence GE 3.5.2/463 <Info> (thread=ReplicatedCache:ReplicatedServiceForProcessingPattern:EventDispatcher, member=1): Registering TaskProcessorDefinition TPD:{Identifier{GridTaskProcessor},Grid Task Processor,GRID} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$1
    2010-09-28 14:30:47.663/4.886 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:DistributedServiceForProcessingPattern:EventDispatcher, member=1): TaskProcessorMediator inserted TPSK:{Identifier{GridTaskProcessor},1} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$2
    2010-09-28 14:30:47.663/4.886 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:DistributedServiceForProcessingPattern:EventDispatcher, member=1): TaskProcessorMediator inserted TPSK:{Identifier{SingleTaskProcessor},0} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$2
    2010-09-28 14:30:47.679/4.902 Oracle Coherence GE 3.5.2/463 <Info> (thread=ReplicatedCache:ReplicatedServiceForProcessingPattern:EventDispatcher, member=1): Registering TaskProcessorDefinition TPD:{Identifier{SingleTaskProcessor},Single Task Processor,SINGLE} Class:com.oracle.coherence.patterns.processing.dispatchers.task.DefaultTaskDispatcher$1
    However, when I attempt to run the example I'm getting a runtime error:
    "C:\Java\jdk1.5.0_14"\bin\java -Dtangosol.coherence.clusterport=COH_OPTSCLUSTER_PORT -Dtangosol.coherence.cacheconfig=coherence-processingpattern-cac
    he-config.xml -Dtangosol.pof.config=file:/C:\temp\coherence-incubator-examples-1.1.1.14471\resource\processingpattern\examples-pof-config.xml -Dtangos
    ol.coherence.log=C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\log\PiCalculationSample-9001.log -Dtangosol.coherence.cacheconfig=C:\temp\coh
    erence-incubator-examples-1.1.1.14471\resource\processingpattern\processing-cache-config.xml -Dtangosol.coherence.distributed.localstorage=false -cp C
    :\temp\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-common-1.6.1.14470.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\li
    b\coherence-commandpattern-2.6.1.14471.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-functorpattern-1.3.1.14471.jar;C:\tem
    p\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-messagingpattern-2.6.1.14471.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\
    ..\lib\coherence-pushreplicationpattern-2.6.1.14471.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\lib\coherence-processingpattern-1.2.1.
    14471.jar;"C:\tools\Coherence-3.5.2"\lib\coherence.jar;C:\temp\coherence-incubator-examples-1.1.1.14471\bin\..\classes -Xms256m -Xmx256m com.oracle.c
    oherence.examples.incubator.processingpattern.task.PiCalculationSample
    Testing PI calculation
    Using the Incubator Extensible Environment for Coherence Cache Configuration
    Copyright (c) 2010, Oracle Corporation. All Rights Reserved.
    java.lang.RuntimeException: Storage is not configured
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.addMapListener(DistributedCache.CDB:59)
    at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.addMapListener(DistributedCache.CDB:1)
    at com.tangosol.coherence.component.util.SafeNamedCache.addMapListener(SafeNamedCache.CDB:12)
    at com.tangosol.coherence.component.util.SafeNamedCache.addMapListener(SafeNamedCache.CDB:47)
    at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.<init>(DefaultProcessingSession.java:218)
    at com.oracle.coherence.examples.incubator.processingpattern.task.PiCalculationSample.executeSample(PiCalculationSample.java:75)
    at com.oracle.coherence.examples.incubator.processingpattern.task.PiCalculationSample.main(PiCalculationSample.java:56)
    The server log shows an error also after I attempt to run the example:
    *2010-09-28 14:32:54.322/131.545 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:DistributedServiceForProcessingPattern, member=1): Service DistributedServiceForProcessingPattern joined the cluster with senior service member 1*
    *2010-09-28 14:32:57.740/134.963 Oracle Coherence GE 3.5.2/463 <Info> (thread=ClientLeaseCoordinator:Thread-5, member=1): Restarting NamedCache: coherence.patterns.processing.taskprocessormediator*
    *2010-09-28 14:32:58.614/135.837 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:06.232/143.455 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:13.850/151.073 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:21.452/158.675 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:29.054/166.277 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:36.656/173.879 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:44.258/181.481 Oracle Coherence GE 3.5.2/463 <Info> (thread=PacketListenerN, member=1): Scheduled senior member heartbeat is overdue; rejoining multicast group.*
    *2010-09-28 14:33:51.766/188.989 Oracle Coherence GE 3.5.2/463 <Error> (thread=PacketListenerN, member=1): Stopping cluster due to unhandled exception: com.tangosol.net.messaging.ConnectionException: Unable to refresh sockets: [UnicastUdpSocket{State=STATE_OPEN, address:port=10.100.153.51:8088}, MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:8087, InterfaceAddress=10.100.153.51, TimeToLive=4}, TcpSocketAccepter{State=STATE_OPEN, ServerSocket=10.100.153.51:8088}]; last failed socket: MulticastUdpSocket{State=STATE_OPEN, address:port=224.3.5.2:8087, InterfaceAddress=10.100.153.51, TimeToLive=4}*
    *     at com.tangosol.coherence.component.net.Cluster$SocketManager.refreshSockets(Cluster.CDB:91)*
    *     at com.tangosol.coherence.component.net.Cluster$SocketManager$MulticastUdpSocket.onInterruptedIOException(Cluster.CDB:9)*
    *     at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:33)*
    *     at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)*
    *     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)*
    *     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)*
    *     at java.lang.Thread.run(Thread.java:595)*
    Caused by: java.net.SocketTimeoutException: Receive timed out
    *     at java.net.PlainDatagramSocketImpl.receive0(Native Method)*
    *     at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)*
    *     at java.net.DatagramSocket.receive(DatagramSocket.java:712)*
    *     at com.tangosol.coherence.component.net.socket.UdpSocket.receive(UdpSocket.CDB:20)*
    *     at com.tangosol.coherence.component.net.UdpPacket.receive(UdpPacket.CDB:4)*
    *     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketListener.onNotify(PacketListener.CDB:19)*
    *     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)*
    *     at java.lang.Thread.run(Thread.java:595)*
    Has anyone had similar experiences? Any advice to help me understand and get this going would be appreciated.
    Thanks !!

    I have same problem.
    Midi trigger patern correctly. When trying idividual souds, it works but running sequencer do not trigger sound.
    HW MacBook Pro (model 2008)
    Soudcard: MOTU 828, M-Audio ozonic, internal speaker
    Midi: Korg nanoPad, Roland Fantom, m-audio Ozonic,
    I invesigate and i found out this:
    1)
    When open MainStage and automaticaly load Concert, pres midi key - no sound
    Then I close just concert not MainStage, open recent concert (same), press midi key - seq playing, soud works
    2)
    Switch of automatic loading last opened Concert, quit and start MainStage, open Concert manualy and no sound.
    Close concert, open again, soud works
    3)
    Switch automatic concert loading on, open MainStage - no sound
    Open preferences, audio / change buffer size, hit applay - sound works
    4)
    Setup previous buffer size, change routing to buffer
    Restart MainStage, no sound, change routing back to output - no sound
    Change audio driver to System Setting - sound works - system setting goes to same soundcard
    Restart MainStage - no sound
    Change system sound output to Internal Speaker - no sound
    Change system sound output to soundcard - sound works
    5)
    Preferences - change audio to System settings, switch off I/O Safety Buffer - below Buffer Size setting
    Restart Mainstage - SOUND WORKS
    Restart MainStage again - SOUD WORKS

  • Processing mode - DELETE not working in Synchronous mode (File - RFC - File

    Hi ,
    I need to the delete the files from source folder once the processing is done, so i am giving the Processing mode as Delete in the Sender C.C.
    But after execution it doesnt get deleted. what could be the reason?
    We are using a file - RFc - file scenario.
    also could anyone let me know what is the command to move a file from one folder to another in UNIX.
    i tried
    mv /home/out        but it doesnt work
    pls help.

    Hi,
    you can use AL11: navigate to the folder, where the file is inside, mark it and press button "Attributes". Then look to value "Mode": 777 means owner, group and everybody else has right for write (in your case delete), read and execute. UNIX command to change is may be ch mod (i m not good in UNIX).
    My suspect is that the file adapter user has not the right for write, but ur direct user has.
    Regards,
    Udo

  • XI to RFC processed successfully but not working

    Hello,
    I finally configured my RFC - XI - RFC async scenario.
    If I go to SXMB_MONI the message is processes OK, the mapping is OK too because I can see the output payload data in the technical routing tab.
    But, the destination RFC must change a DataBase table in the his R3 server and it didn't happened so something is wrong.
    How can I know where is the problem? It looks like XI runs fine, then I think the problem is in R3 destination. How can I check if the RFC has been called?

    HI Marshal,
    Which RFC you are calling? Check if you need commit work after calling RFC.
    Also you can check if messages are not stuck in XI trfc queue using transaction code :SM58.
    Hope this will help.
    Nilesh
    And how I know if I have to commit work? And how I commit work from XI?
    The RFC it's a custom RFC and it has only one line code:
    ---> MODIFY ZTABLE FROM IT_TABLE.
    IT_TABLE is the parameter from XI and ZTABLE is a custom transparent table. I've tested and it works fine.
    I also checked SM58 in XI and nothing is there.
    The RFC destination parameters are filled OK too, I've checked in SXMB_MONI from XI.
    I don't know what else can I check

Maybe you are looking for

  • Connection key in cs5, working for some users but not others.

    I've created a publisher connection key and have sent to 3 people to use.  I can open and connect the other 2 people can't. Any ideas why not? Thanks.....mommadell

  • Oracle 10g Express Edition E-Mail Capability?

    Hello all, We plan to deploy Express Edition for a project. I wonder is there any limitation on Express Edition to send e-mail with PL/SQL? Would it be a problem? Thanks in advance...

  • Powershell script to find number of major and minor version for a item

    Is there a way to figure out to get the total major and minor version count for an item in powershell. I can get the count on basis of following "Item Versions" = $item.Versions.Count but not sure how to get number of major and number of minor versio

  • Generating Dynamic form from static context.

    Hi All I have  static context node structure Section  (Node)       QuestionText  (Attribute)        AnsText  (Attribute) I have populated the values in this node from an RFC in my code . Now i need to create a form dynamically with QuestionText as la

  • Adobe reader's compatibility comes up Adobe plug in false

    Testing my computers compatibility with a program turned up an error message that "adobe reader plug in false this version of Adobe Reader unsupported ". I uninstalled and reinstalled Adobe Reader X 4 times and still have the same problem. When I try