2 PS3's connection problems/ How do I get open Nat on 2 PS3s.

I am having problems with the connection on my ps3's. Me and my brother both have seperate ps3's. We play call of duty mw3 together. When we are both online and playing we have problems. We both are in the same party and we try to join games but we can never join any. When we are both online, One of the ps3's has an Open NAT and the other ps3 has a moderate NAT or a strict NAT. When only one of us is playing everything is fine.
I want to know how can I make both of them have Open NATs and how can I fix this problem I have. I have an extra router as well. Any help would be great. Thanks!

Do This first, 
How to setup the MI424WR Verizon FiOS Router for multiplayer gaming with the Wii and Xbox gaming con...
And then Do one of the two below.  
How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router
How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router
Keep in mind that your username should be admin and your password should be the serial number on the service sticker of your router.  That is located under the bar code, and it IS case sensitive.  

Similar Messages

  • HT1688 my iphone is having connection problems how do i get my free bumper from apple?\

    my iphone4s is having connection problems how do i get my free bumper from apple?\

    nicoleking wrote:
    ... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
    https://discussions.apple.com/message/22920500

  • Cant get open nat type for PS3, it use to be but wont go back

    im on Fios with the verizon router. I had the DMZ set to an ip with the PS3 also on it. the nat type was open and all was ok. I dont know how long its been this way (guessing not long because I have sucked at COD this week!) but I noticed im not at moderate. I checked the DMZ and the ip was still there. looked at PS3 and it was empty for some reason, so I put the ip back. ive restarted and tried other IPs andit will not go back to open. ive looked at youtube tutorials to be sure that im not missing anything but the vids seem tobe older because I have more options on the router settings than what the vids show, guess I have newer firmware. Any suggestions?

    actually, Open is what you want. you have a lot better preformance online when dealing with fast paced games like COD. you will really notice a difference. generally you just designate an IP in the DMZ settings of the router, then tell the PS3 to only use that IP, and thats it. just seems now on my end thats no longer the case and cant get it to go 

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • HT202667 I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

    I switched from att to charter internet and change e-mail address. I keep getting messages telling me my at&t iCloud account is not connected. How do I get rid of the at&t iCloud message?

    Hi adamsfly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you changed your email address and iCloud is looking to sign in with the old Apple ID email. I would recommend that you read this article, it may be able to help the issue.
    What to do after you change your Apple ID email address or password - Apple Support
    Cheers,
    Mario

  • I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install?

    I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install on my 24" Imac?

    As long as you use your Apple ID to purchase it, I don't see why they wouldn't let you download the installer on one of their Macs and put it on a pocket drive.
    Or, a friend with a high speed connection?
    I agree with you about the delivery method, just trying to help you get what you want.

  • I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

    Hello. First time using this. Still trying to figure out how to post my questions. I seem to have lost some of my settings and now I cannot configure my airport connection. How do I get my settings back?

    If you are using cable and a Nethear router sounds like from the information you provide before your Airport setting are setup improperly. PPoE is not something a cable service would need to work. Fallow the steps I will provide bellow, I will add some screen shots also to assist if necessary.
    1 - Open System Preferences from  (Menu)
    2 - Click "Network"
    3 - From the Network window you are going to wanna make sure Location is : Automatic and Show is : Airport
    4 - Once the Show: Airport is select you should see a window like this, my window is selected for Ethernet simply because I am no longer running Tiger but the window will look the same.
    5 - You will want to click on the PPPoE tab and you should see this
    6 - You're gonna wanna make sure " connection using PPPoE " is not select, if it is make sure to uncheck this option
    7 - Once this is uncheck make sure to click "Apply Now"
    8 - You will want to click back on to the "TCP/IP" tab and make sure IPv4 is set to " Using DHCP "
    9 - If the option to " Apply Now" is available again please click this
    10 - Once this is done go to your Aiport Menu and see if your network is listed and select your network and eneter the password if necessary.
    11 - If after these steps you still have issues I would recommend Power Cylcing your Router and Modem for about 5 minutes
    12 - Make sure all lights are off when unplugging the Router and the Modem
    13 - Some Modems have backup batterys so you may have to push in a tiny button on the back with a pin

  • Help my hard drive is being taken up by about 200gb of "other" memory, i am running time machine on an imac does does cause the problem how can i get rid of all "other" memory

    my problem is that most of my imac hard drive is being taken up by 200gb of "other' memory
    i am running time machine does this contribute
    how can i get rid of all "other" memory
    thanks

    JKOL96 wrote:
    i am running time machine does this contributex
    Some, possibly, but shouldn't be a problem.
    how can i get rid of all "other" memory
    Much of it is OSX and other things needed to run your Mac.
    See The Storage Display for an explanation, and don't miss the link to Where did my Disk Space go?

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • Problem,how do i get back my system preference? i think i delete it my mistake.

    problem,how do i get back my system preference? i think i delete it my mistake.

    did you delete it from your dock or did you delete it completely from the computer
    if it has just been removed from your dock all you have to do is go into your application folder and drag the system prefrences icon back to your dock .. if you are running an older version of osx go into finder click applications and find the icon for system prefrences there .. if you have snow lepord you can get the icon in the application folder on the right side of your dock
    if it has been deleted completely from the computer use the disks that came with your computer to reinstall it
    if your too nervous to do it yourself you can always make an appt with an apple store in your area at the genius bar and they can probably get it back for you

  • I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice.  The other pairs with the mouse, but I cannot get the keyboard to connect.  How do I get a keyboard and mouse to connect to each iMac independently?

    I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice.  The other pairs with the mouse only; I cannot get the keyboard to connect.  How do I get a keyboard and mouse to connect to each iMac independently?

    Antaeus00 wrote:
    I tried sending a request for help,
    But did you succeeed in sending a request for help?
    Did you receive a response? How long has it been since you sent a request?
    but I need someone with more authority to talk to.
    There is no one with more authority than iTunes store support. We herem are only users.

  • How does one get open applications to reappear on desktop when they have disappeared?

    How does one get open applications to reappear on desktop when they have disappeared? They disappeared by something I did but don't know what.

    Try clicking on their Dock icon. Or you can use the task bar: COMMAND-TAB.

  • How to Open NAT Type on PS3?

    How do i open NAT Type on PS3
    Need help

    When you run the network test on the PS3 what is shown?  what NAt type?

  • Persistent Wi-Fi connection problem: How to get support?

    I bought my iPad few days ago in Hawaii and returned home yesterday to Germany. I had connected Wi-Fi a few times at my B&B in Hawaii and it seemed to work. But now Wi-Fi connection with my iPad is a mess while connections with iPhone, MacBook Pro, PC at the same locations work very good.
    I tried several solutions including those recommended by http://support.apple.com/kb/TS3304. Additionally I tried to manually assign IP to my iPad.
    On different locations (i.e. airport, at home) the Wi-Fi connection indicator fluctuates and connection speed seems to drop down. Just right now connection is lost approx. every 5 - 15 minutes. Switching Wi-Fi off and reconnecting sometimes helps but sometimes I have to wait some 5 or 15 minutes until Wi-Fi works again. Sometimes I even have to reset all connection data. When Macbook, iPhone or Windows PC show me 10 available Wi-Fi networks the iPad may only list 2 or 3.
    Yes, I tried to contact Apple Support:
    "If after attempting the troubleshooting tips provided above you are still having difficulty connecting to a network please contact Apple."
    I called your support phone number 1-800-275-2273 several times from Germany but each time the system tried to connect me to an iPad advisor the call didn't go through.
    Several tries to open a case via http://www.apple.com/support/expert/ failed. After filling out the form the website just tells me: "We're sorry, but we are unable to complete your request at this time. Please try again in a few minutes or start over now." Next try same result.
    You link to worldwide support telephone numbers:
    http://www.apple.com/support/contact/
    http://www.apple.com/support/contact/phone_contacts.html
    I called the given German technical support number but Apple Support denied support and instructed me to reset the iPad to it's original state. Resetting the iPad did not resolve the problem.
    German Support told me she has no information ("no email received") about http://support.apple.com/kb/TS3304. She told me Apple Support in Germany will not give any else support prior to official start of iPad availability in Germany. But when German Apple Support is not even aware of that problem Apple posted on the support site how would they support me?
    How do I get support to resolve that issue?

    I configured my router to only use 802.11b and 802.11g and NOT 802.11n. It seems like my iPad keeps steady connection with two or three bars and recovers good from sleep mode since about half an hour sigh But I would like to use it also at hotspots... and would like to enjoy appropriate speed when transfering files or watching videos

  • HT5730 After I installed 10.8.48.4 Internet browsing slowed down to the pace of a dial-up connection.  How can I get back to normal operating speed?

    After I installed 10.8.4, my Internet browsing slowed down to the pace of a dial-up connection -- unless it froze up completely.  How do I get my system back to a normal operating mode?  Can I dump 10.8.4 and go back to the one that at least worked?

    Please answer as many of the following questions as you can. You may already have answered some of them.
    1. Have you restarted your router and broadband modem since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
    2. Are any other web browsers installed, and are they also slow?
    3. What about other Internet applications, such as iTunes and the App Store?
    4. Are there any other devices on the same network that can browse the Web, and are they also slow?
    5. If you can test Safari on another network, is it slow there too?
    6. If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Maybe you are looking for