2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache  levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay.  Second click turns up results immediately.  This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions.  Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key.  Strange.
Windows 7 x64.
-Noel

Similar Messages

  • Lr, Photomerge and Lens Corrections

    I use to apply an import preset to all my photos that just enables the lens corrections. That's my doubt: when I make a pano with Photomerge in CS5 (so I select photos, right click, Edit In, Merge to Panorama in Photoshop..) I have to select or not the "Vignette removal" and "Geometric Distortion Correction" features? Photomerge takes count on the adjustments made in Lr? I've the doubt because in the source files list are elencated .CR2 files, not TIFF/PSD..
    I made some tries:
    1. Lens corrections in Lr/Lens corrections in Photomerge
    2. Lens corrections in Lr
    3. Lens corrections in Photomerge
    Try 1 is a little bit stretched compared to tries 2 and 3.
    Tries 2 and 3 aren't totally identical. They not match 100% even if are almost equivalent.
    What do you do guys when it comes to panos and lens corrections? Thanks

    I think I'll make all the adjustments in Lightroom, lens correction too and leave the two options in Photomerge blank. I don't know why there are little differences between the lens corrections in Photomerge and Lightroom, I thought it's the same module, but that's it..

  • Question about RAC and ASM

    Hi,
    We are thinking about build RAC using ASM for OEM database. It'll have two nodes, oracle 10g and Hitachi san with solaris ( or linux ). I've few questions about RAC and ASM.
    1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )
    2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?
    3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?
    4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..
    5) I believe RMAN is the only option for backup since I'm using ASM, correct ?
    I'm a newbie to RAC and ASM..
    Thanks,

    user4866039 wrote:
    1) Do I need to have ASM instance running on each node ? ( most likely yes... but want to make sure )yes.
    2) can I share oracle_home between ASM instance and database instance ? what is the best choice ?in 10g you can, in 11gr2 you cannot. and it might be better to seperate them because it will give you more flexibility with patching.
    3) I'm planning to use shared disks for all files, all databases.... what are the pros/cons ?if you share your oracle_home you won't be able to do rolling updates. so i recommend to keep oracle_homes local.
    4) what should be the installation procedure ? Meaning, first create ASM instance on each node, then install cluster software, build RAC databases...... can someone explain..follow the install guide for your respective version. for 10g you'd install clusterware first, then asm and database is last.
    5) I believe RMAN is the only option for backup since I'm using ASM, correct ?pretty much. you could stop your database and dump the raw devices or use asmcmd/asmftp but rman is definitely the best choice
    Bjoern

  • A question about grub and USB

    Hi All
    I have a quick question about grub and USB that I can't quite find the answer to by searching.   Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this.  I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife).  I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR.  So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick?  My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive. 
    Thanks
    Kev

    i cant say for hp's
    havent worked on any in a while
    recent machines have been coupleof dell's , vaio & emachine
    which dells do offer it at least the ones i tried , my laptop does(dell)
    all home pc's are built by me which do offer to boot individual drives
    what hp you getting it may tell in specs
    are both discs sata? if so it might not offer this option with 2 drives of same interface
    check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
    & will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
    i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
    i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
    if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
    i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
    for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
    i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
    you may want to consider this in your next venture for pc

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • A few questions about MacBooks and Parallels Desktop.

    I have a few questions about MacBooks and Parallels Desktop.
    1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
    2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
    3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
    Thanks
    Keith

    1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
    2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
    Remember to leave at least 2 or 3 Gb for virtual memory usage.
    3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
    Good Luck

  • One question about Pricing and Conditions puzzle me for a long time!

    One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
    1-First,my sale order use pricing procedure RVAA01.
    2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
    3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
    4-Next,the Access Sequences PR00 have some Condition tables,such as:
         table 118 : "Empties" Prices (Material-Dependent)
         table 5 : Customer/Material
         table 6 : Price List Type/Currency/Material
         table 4 : Material
    5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
    A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
    B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
    Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can  explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

    Hi,
    You said that you are using the T.codes VK31 or VK32.
    These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
    Pl check using T.code VK11 OR VK12 (change mode)
    Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
    After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
    You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
    You can give all the required values and save the conditon record.
    Hope this is clear.
    REWARD IF HELPFUL.
    Regards,
    praveen

  • Odd Issue Editing in Photoshop with color and lens corrections

    First off, I'm on LR 4.4 and PS CS6 (Camera Raw 7.4.0.137) using ProPhoto RGB as my LR colorspace and have my PS color settings as Working Space: ProPhoto RGB and my color management policies to preserve embedded profiles.
    When I right click on a DNG in LR and choose "Edit in Photoshop", LR sends it to PS and PS does its "Reading in Camera Raw Format" and opens the image.  However, the colors are off (very muted) and any lens corrections I've applied in LR are missing.  My monitor (iMac on OSX 10.8) is calibrated with a Spyder.  I've also noticed that if I choose to edit in another application, it renders the tiff fine and the color and lens corrections are correct in the tiff. 
    Anyone have any ideas what my issue is?
    Thanks,
    Matt
    ETA: After some experimenting, it seems that the "Adobe Standard" profile is what gets sent to Photoshop.  The rest (Camera Landscape, Portrait, etc.) are ignored. What's going on here?

    Sounds like you need to reset your warning dialog. Preferences>General>Prompts [Reset all warning dialogs]
    Then try it again and make certain of the three choices you are Editing a Copy with Lightroom Adjustments.

  • Three questions about Java and Ftp

    Hello, i've the following questions about Java and Ftp:
    1- .netrc file is in $HOME directory but i can't access to this directory from java code. The following line producesan Exception (directory doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");
    2- .netrc file must have the following permissions: -rw- --- --- but when i create the .netrc file the following permissions are on default: -rw- r-- r--, how can i change this permissions? (In java code, i can't use chmod.....)
    3- Are there any way to pass parameters to a .netrc file? If i get to do this i needn't change the permissions because i can't modify or create/destroy this file.
    Thanks in advanced!!!
    Kike

    1- .netrc file is in $HOME directory but i can't
    access to this directory from java code. The
    following line producesan Exception (directory
    doesn't exists)
    FileWriter file = new FileWriter ("$HOME/.netrc");$HOME would have to be replaced by a shell, I don't
    think you can use it as part of a legal path.
    Instead, use System.getProperty("user.home");
    Ok, thanks
    2- .netrc file must have the followingpermissions:
    -rw- --- --- but when i create the .netrc file the
    following permissions are on default: -rw- r--r--,
    how can i change this permissions? (In java code,i
    can't use chmod.....)Yes, you can: Runtime.exec("chmod ...");
    I need to use estrictly the .netrc with -rw- --- --- permissions
    Yes, i can use Runtime.exec ("chmod ..."); but i don't like very much this solution because is a slow solution, am i right?
    3- Are there any way to pass parameters to a.netrc
    file? If i get to do this i needn't change the
    permissions because i can't modify orcreate/destroy
    this file.I don't think so. Why do you need the .netrc file in
    Java at all? Writing a GUI frontend?I want to use automatic ftp in a java program and FTP server, the files and path are not always the same, so i can:
    - modify .netrc (for me is the complex option)
    - destroy and create a new .netrc (is easier but i have permissions problem)
    - use .netrc with parameters but i haven't found any help about it
    Thanks for your prompt reply!!!!
    Kike

  • So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

    So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

    Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • TS1424 itunes purchase security questions & answers reset and answered correctly.  Can not log in with updated answers which state one or both are incorrect.

    Can anyone help with this situation?
    itunes purchase security questions & answers reset and answered correctly.  Can not log in with updated answers which state one or both are incorrect.

    You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (94948)

  • Basic question about storage and safety in iMovie '11

    A very basic question about storage and safety:
    I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
    1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
    2. Duplicate that footage/clips.
    3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
    4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
    5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
    6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
    I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
    QUESTION:
    Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
    *Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
    In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
    This time around with iMovie '11 I don't to make such novice, ignorant errors.
    Thanks so much for any comments to this question.
    -L

    Yes I'm sure it will work great for you.
    The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
    iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
    iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
    Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

  • A Question about RAW and Previews

    I have just recently starting shooting in RAW (mostly for the post production editing abilities - I am an avid amateur photographer bent on learning as much as I can). I set my camera to capture in RAW + L. I don't know why I feel like I want it to capture both the RAW and JPEG file, and thus leads me to my first question: Is it necessary to have the camera capture both the RAW and Large JPEG? I am assuming the answer to be no, as I am sure if after importing the RAW file into Aperture, you could always export a JPEG if you wanted one? So no need to fill up your internal memory (if using managed masters) with the extra JPEG? Is this thinking correct?
    Next, if you do import RAW-only files and then want to export certain images, do you have a choice to export the original RAW image? It seems that it only allows you to export a JPEG Original Size. To answer my own question, perhaps you have to export the Master in order to export the full RAW file when exporting? If you want to export a JPEG, you have to export not the Master, but a version of the Master? Is this correct?
    Lastly, I wanted to ask a question about Previews. I have my preferences set so that previews have the highest quality with no limits to size. What is the significance of setting it this way? I just assumed that if I wanted to share an image at the highest quality without exporting it, this was the way to go. Is there any validity to this? The reason I ask is that I don't want to have all of these high quality previews taking up internal disk space if I really don't need to. Is there a way to change the preview size once previews are created? Meaning, if you have it set to generate low quality previews, can you change it dynamically to high and vice versa?
    I know this is a lot in one post. Thanks for tackling it.
    Mac

    You can change the quality of the Previews in the Preferences -> Previews tab.
    You can regenerate Previews with the Delete and Update Previews under the Images menu.
    Regards
    TD

  • A question about upgrades and mroe upgrades

    I've got a question about the upgrade sequence and costs thereof
    I have CS5.5 Production Premium. Suppose I upgrade to CS6 production Premium. If, when CS6.5 comes out and I decided to upgrade, would it be considered an upgrade from 5.5 or 6 for pricing purposes?
    I presume the older the software the more expensive the upgrade but if I'm upgrading from my CS6 upgrade would it be considered an upgrade from CS5.5 9the original suite) or an upgrade from CS6?
    Thank you

    You have a CS5.5 now. Now, you upgrade to CS6.
    When CS6.5 come out. It will be considered as an upgrade from CS6 (and not CS5.5 which is your original suite). Hope this is clear
    Jagadish

  • Question about "synchronized" and "wait"

    Hello, everyone!
    I have seen a piece of code like this,
    synchronized (lock)
    //do operation 1
    lock.wait();
    //do operation 2
    I think in the above piece of code, when a thead finished operation 1, it will release the lock and let other threads waiting for the lock have chance to run the same block of code. Am I correct?
    If I am correct, I have a further question, a "synchronized" block means a set of operations that can not be interrupted, but when invoke "wait" method, the thread running in the "synchronized" block will be terminated (interrupted) by release the lock and other threads will have chance to enter the "synchronized" block. In short, the execution inside the "synchronized" block will be interrupted. So, I wonder whether the above piece of code is correct and conforms to the principle of "synchronized". And what is its real use?
    Thanks in advance,
    George

    Thanks, pkwooster buddy!You're welcome
    I just wondered whether "wait inside a synchronized
    block" technology is thread safe. Please look at the
    following example,wait and synchronized are thread safe.
    public class Foo {
    int mVal= 0;
    public final Object mLock = ...;
    public void doIt() {
    synchronized(mLock) {
    mVal = ...;
    mLock.wait();
    if (mVal == ...) {
    // do something
    } else {
    // do something else
    }If we have two threads, T1 and T2, enter the block in
    their respective order, and T1 is woken up first, T2
    may have tampered with T1's execution path because T2
    changed mVal while T1 was asleep. So T2 manipulate
    instance field mVal is a side-effect.when you do the wait() you give up the lock and the other threads get a chance to run. When you exit the wait() you get the new value of the myVal variable which may have been changed. This is exactly what you want. To make that not thread save you could do
    int temp = myVal;
    wait();
    if(temp == ...)in this case the variable temp contains the old vale of myVal.
    >
    I think the most safest way is never wait inside a
    synchronized block, but it is less efficient. What do
    you think about the trick of wait inside a
    synchronized block? I think you are very experienced
    in thread field from your kind reply.
    Thanks in advance,
    Georgewait(), notify() and notifyAll() are very useful. You need them when you want threads to cooperate in an predictable manner. I recommend that you review the section on consumer and producer classes and wait and notify in the Threads Tutorial. It gives good examples. For a practical example of this you could also take a look at my Multithreaded Server Example. It implements a simple chat server that switches String messages. Look especially at the send(), doSend() and popMessage() methods in the StreamConnection class. These allow the receive thread of one user to send messages out using the send thread of another user. If you have questions about that example, please post the questions on that topic.
    Hope this helps.

Maybe you are looking for