2 questions about bridge cs6 is always the rotate lossless? and high quality on demand

Hi
about bridge cs6 the rotate buttons rotate 90° counter and 90°clockwise is lossless ? i mean without loss of quality ?
and my i know the meaning of high quality on demand? might someone make an example?
thanks a lot

That's why I have never bothered to conduct such a test. A complete waste of time, in my opinion.
I would not put it that way because it always interesting to what extend users like to go or come up with for testing
But in basic, yes you are right. If you need such extreme test to proof the theory wrong the practice still is a winner. If you can't see it with your own eyes it is not really important but to fill an academic paper. In real life neither you, nor the customer or viewer would notice any difference
According to the discussion about jpeg vs Raw, of course Raw has a ton of benefits above jpeg. Personally I almost never shoot jpeg but I do know people that do to satisfaction.
Suppose you are a sports photographer and need both speed in writing to the card as in post process etc. You are working under know and solid light conditions and have measured your wight balance and set it manual. This provides very good qualities (that is if you have set the jpeg quality to high or max in camera) and shot with a recent good dSLR it produces files that can be published without problems on a magazine spread.
I can't see disadvantage for such situations. However, you have to be aware that for future use your options are still limited when deciding to change post processing. Color temperature, exposure etc etc are far more flexible with Raw then jpeg.
The vast majority of my clients want jpeg and that is what I convert to when files are ready. Yet I keep my original DNG and PSD file.
Especially the archived Raw (in my case since 2008 converted DNG from CR2 files) is important. I can't tell you how surprise I am every time I open a raw file from 10 years ago in todays Raw converters. They have been improved very much and are able to get more out of your old files then you ever could imagine.
And to finish with an other plus side of Raw. If you need to enlarge old and new raw files to huge billboards you will discover that the results of the Raw are far more superior

Similar Messages

The deinterlace and high quality settings

Hi !
I've seen the options "deinterlace" and "high quality" for the video track in the sequence properties from "window" of Quicktime.
Does anyone know what they do exactly ?
Thank you
Olivier
G4, 1.42 gHz Mac OS X (10.4.9)

Open Automator.
Click once on the word QuickTime in the "Library" (left most pane).
Drag the "Set Movie Playback Properties" (Action pane) to the right side part of the window.
Set your parameters and save the workflow and an Application.
Drag your QuickTime files onto this Application (one at a time or as a group) and they will be converted.

Hello , I want to ask some question about ipads \ How powerful is the iPad? How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device? please help me :(

Hello ,
I want to ask some question about ipads \
How powerful is the iPad?
How useful is it for reading books, newspaper or magazines or for surfing the web?
Can you identify any shortcomings of the device?
please help me

it's less powerful than your average computer. THink of it like a netbook but with a better processor.
It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
By and large, it's a good device for day to day stuff, but is not a computer replacement.

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not a

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

Bridge CS6 part of the Cloud subscription?

Is Bridge CS6 part of the Cloud subscription? I don't see it available as a download option, and my

Bridge is not a separate standalone download. It installs automatically alongside the other apps.
http://www.adobe.com/au/products/bridge/buying-guide.html

It does not cover my question about in what order does the sync work?

It does not cover my question about in what order does the sync work?
Does the first signed on computer copy its information to the cloud?
Does the second computer/pad/cell then download the information from the cloud overwriting the information on the second device even if some of the information is different?
What happens to the information on the second device that is not in the cloud?
If you delete a record (eg a bookmark) from the second device how does it then delete it on the first device?
What are the keys to the different types of information?

Hi I have answered you questions inline below:
Does the first signed on computer copy its information to the cloud?
Yes when you first set up the account or when you first add a device to the cloud, if it is not the first time, it will merge with the other data
Does the second computer/pad/cell then download the information from the cloud overwriting the information on the second device even if some of the information is different?
By default it merges. There is no option to change this.
What happens to the information on the second device that is not in the cloud?
It will sync at the next sync interval if that data is selected to sync.
If you delete a record (eg a bookmark) from the second device how does it then delete it on the first device? What are the keys to the different types of information?
It resolved the entry the next time the first and second device syncs. Can you elaborate on the second part of this question?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

I have a PowerMac G4 running ProTools that no longer boots up. All I get is a file folder on the screen with a flashing question mark in it. Ran the Utility disk and all systems passed. Any ideas?

You need to use the computer's install disks to repair the hard drive or install a new OS.
(58033)

How can I view information about an image, such as the file name and exposure, on the Ipad?

how can I view information about an image, such as the file name and exposure, on the Ipad?

You can't with the built-in Photos app, but there are apps such as iPhoto which allow you to see the exposure details (aperture, shutter speed, focal length, ISO). PhotoMeta also shows you that info

CS6 InDesign - Default display is high-quality. Four placed images are Illustrator files. Three images look the way they should - high-quality. One image looks pixelated. Why?

InDesign CS6 - Default display is high-quality. All four placed images are Illustrator files. Three images look the way they should - high-quality. One image looks pixelated. Why?

Not sure if this will help, but what is your inDesign file's "Transparency Blend Space" set to? It's under the edit menu.
Also, when you are placing your images, are you selecting "Show Import Options" and making any selections there?

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I want to update my macbook pro, but it's showes always the installation failed and i should contact the software manufacturer for assistance. i want to update my OS X 10.8.4

i want to update my macbook pro, but it's showes always the installation failed and i should contact the software manufacturer for assistance. i want to update my OS X 10.8.4

Not normal. Shutdown and restart.

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Sometimes a web page appears with only text and no picures. It is not always the same site and does not always happen. If I switch to Explorer for the same web site it always works

Thank you, it worked with just F5. I don't know whether CTRL + F5 would work because the problem has not come back yet!

Table AGR_1251: Search between a range of the field "LOW" and "HIGH

Hello Experts,
i've got a problem by searching all users who have the authority for a transaction.
The transaction was written in a parameter, called p_trans.
I've the Tables AGR_1251, AGR_AGRS and AGR_USERS.
I know what I've to do.
Here is my Join.
SELECT agru~uname
INTO CORRESPONDING FIELDS OF TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
    ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
    ON agrs~agr_name = agru~agr_name
INNER JOIN usr01 as us
    ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
               ag12~field = 'TCD' AND
               ???? parameter p_trans between ag~low and ag~high????
SELECT agru~uname
APPENDING TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
    ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
    ON agrs~child_agr = agru~agr_name
INNER JOIN usr01 as us
    ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
               ag12~field = 'TCD' AND
               ???? parameter p_trans between ag~low and ag~high????
SORT gt_users BY uname ASCENDING.
DELETE ADJACENT DUPLICATES FROM gt_users COMPARING uname.
Here is my question:
In my code are question marks...here i want to say, that my transaction lays between the fields LOW and HIGH.
But how can i say, that in WHERE.
I have to say... Search that agr_name, where object = s_tcode, field=tcd and where my transaction lies between.
For example: low is T and high is X and i have the transaction va21.
So i must find out, in which range lays ma transaction.
I hope somebody understands me
Thanks!
Regards,
Marcel

Hi Marcel,
You are mentioning it as a parameter between having low & high values. Is it a parameter or select option.
If its a parameter, then anyway it will have only single value at any point of time.
If its a select option, then you need to use
select * from
and tcode in s_tcode.
Thanks,
Best regards,
Prashant

[JS] To Read: "The Essentials of Writing High Quality JavaScript"

Received through The Code Project Daily News:
For all just-starting Javascript writers as well as for the seasoned ones -- and the ones that think they know a trick or two : an excerpt by Stoyan Stefanov in honor of his new O'Reilly title “JavaScript Patterns”.
A single page article, but it's a long page, and describes enough super-duper coding practice top tips to make your mouth water for the full deal.
http://net.tutsplus.com/tutorials/javascript-ajax/the-essentials-of-writing-high-quality-j avascript/

George,
It looks like this:
First Script:
(function() {
//snip
for (var j = 0; supportScripts.length > j; j++) {
     if (myTPS.timingInfo) {
          var supportStart = new Date();
     app.doScript(supportScripts[j]);
     if (myTPS.timingInfo) {
          var supportEnd = new Date();
          myTPS.log(supportScripts[j].name + " duration: " + (supportEnd - supportStart) + " ms.", interactive);
} // end for
Support Script:
(function() {
     // include the event services object and functions
     #include 'LC250III:ScriptSources:TPSevServe.jsx'
     // ++++++++++++++++ Main code function follows +++++++++++++++++++++++
     function performFunction(aDoc, interactive, eventId, myTPS) {
          // Here's where the actual code that does something useful goes
          // In here, I had a loop where I used j but forgot to declare it with var
          // Like this:
              for (j = 0, 5 > j, j++) {
                    // whatever
     } // end performFunction
     // ++++++++++++++++ Kick-off Code starts here +++++++++++++++++++++++++
     // If the job.id scriptArg is defined, we're running under Publish
     var interactive = !(app.scriptArgs.isDefined("job.id"));
     // make our working object
     var myTPS = new TPSevServ();
     // locate the "active" document
     if (app.scriptArgs.isDefined("job.activeDocument")) {
          var aDoc = app.documents.item(app.scriptArgs.get("job.activeDocument"));
     } else {
          var aDoc = myTPS.findLiveDoc();
          if (aDoc === null) {
               myTPS.log("Couldn't locate active document.", interactive);
               return;
     var eventId = app.scriptArgs.get("job.eventId");
     try {
          performFunction(aDoc, interactive, eventId, myTPS);
     } catch(e) {
          myTPS.log("Error " + e.number + ": " + e.message + " at line: " + e.line, interactive);
It turned out that by failing to declare that deeply internal loop variable as a local (I think it was even deeper than I'm showing here in that it was inside a called function), I was accidentally using the same j as in the calling script. As a result, when the calling script tried to post the duration to the log, it got an error because the value of j was wrong for picking up the supportScript's name. The error was a cryptic "[21]".
At least next time I'll know what it means.
But it has shaken my confidence in the value of anonymous functions. I guess the point is that names inside an anonymous function don't leak upwards into the global space, but they can flow downwards.
Dave

Two Questions about Adobe CS6

I've recently begun editing a film project and have two questions about Adobe Premiere Pro CS6 that I was hoping someone could answer.
1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
Thanks

1. Is there any way to remove the lens edges in a video clip? (without comprimising the quality of it that much)
Yes.
It will depend on the degree of lens edge intrusion into the frame,
but an enlargement of 5-10% or so is not a big problem.
2. Is there a way I can put a color filter over clips? (I'm looking for a kind of an old 70s gold-ish filter)
Oh, yeah... lots of options (including many 3rd party plugins).
Premiere color correction
FAQ: How do I learn Premiere Pro?
http://forums.adobe.com/thread/878529?tstart=0
Getting Started with Premiere Pro CS6
http://www.video2brain.com/en/getting-started-with-premiere-pro
Adobe Premiere Pro Help and tutorials
http://helpx.adobe.com/premiere-pro/topics.html
Premiere Pro CS5-CS6 Reference
(.pdf 12 MB download)
http://helpx.adobe.com/pdf/premiere_pro_reference.pdf

2 questions about bridge cs6 is always the rotate lossless? and high quality on demand

Similar Messages

Maybe you are looking for