2 questions about connection to hyper-v in windows 8
hi,
I can connect to my virtual machine from hyper-v manager ,but when I try the other option
--- connect with hyper-v virtual machine(option) I see on the log on wizard telling me that I don't have the right to run this job. take contact with the autorazition policy administrator.
1---my question is here , is connect with hyper-v virtual machine option is specially purposed to connect with virtual server or it has some onother function! because I opened the autorazation
policy on my windows 8 to see if I can edit some policies but I didn't see any function to creat one only it is asking for archieve.
2--connction trough remote desktop to VM is only purposed from ouside or you can use it to connect to VM internally too? very short answers wil be enough.
thanks
johan
h.david
thanks
,but wat about connect to hyper-v virtual machine option in start menu(which is one of hyper-v manage programa's option and the second is shyper-v manager), why I can not connect through this option
it gives me Always an error with that I don't have the right to run this conect option through its log on window and I have to contact my system administrator of autorization policy?
is this option (connect) outside the hyper-v manager is purposed for the server or I have to change some policies on my computer to can log on to virtual machine from ouside the hyper-v manager with this second option
johan
h.david
Similar Messages
-
Question about connection to network with Terminal Window
WinXP Pro, SP2, PCMCIA-Fritz-Card
Hi,
I'm trying to create a computer-to-computer connection via ISDN telephone line.
I didn't install any specific dialing software, I'm using only setting of MS WinXP.
The hardware is working fine, I tested it successful while dialing in to different internet provider.
Now I need to connect to a company network and they have a specific logon policy, where I need to show the Terminal Window during login procedure.
Therefore I activate on dial in connection property dialog, on page 'Security Properties' the option 'Show Terminal Window'.
Problem during dial in: the window doesn't occur.
Second problem: If I go next time to this option, the input value is not saved.
Any ideas?
Regards,
PeterPlease dont be mad on me but I dont see what is in your posting specific for Toshiba forum.
You should talk with network administrator in your company and he should be able to help you. Other way, maybe on some network specific forum you will have more chance to find out what is the solution for your problem.
If you have Toshiba notebook and all hardware you need for connection works well, I dont see reason for writing here.
Anyway I wish you luck and hope your network administrator will be able to help you. -
General question about data recovery from raid on windows server !
hi,
I like to buy data recovery software for windows server to recover data with any raid( or whitout raid
so the company tells me you should be sure the Raid can be recognized correctly as local disk drive first, otherwise, our product wil not help you. so if I want to recover data of my customers which has windows server with any raid form ,how
I can make this server harddisks(which is raid 1,5,6 ect)recognized coorectly as local disk drive.
thanks
johan
h.davidI have myself NAS which is connected to my computer through router.
I am started smal bussines ,and I want to use also data recovery service for deleted documents,photo's,formatted drives ect.for my customers .things that accidantally errased from raid or non raid
so I found some data recovery softwares
1-stellarphoenix data recover,which has remote acces and netwerk acces.
2--ease use data recovery software. I liked this second software,but they telling me like this,
you should be sure the Raid can be recognized correctly as local disk drive first, otherwise, our product wil not help you.
I understand the both situations you telling me.thanks
but my question is can I not run data recovery software from bootable usb stick on the smal servers like essential with raid to recover data in case of any problems that caused data loose.
I know if I install data recovery software on the server to scan it ,it wil rewrite some places on harddisk and that is not wise.
h.david -
Need help.. Question about connectivity of PS2 with Creative A2ZS Video Edit
Hi everyone, i have question regarding creative A2ZS video editor.. please forgive me for my innocent question since im new here..
I own a Play Station 2.. can this video editor allow me to connect my PS2 and show the display on the monitor so that i can play my PS2 game on the monitor? it's like functioning like a VGA box.. thanks!Message Edited by nicholas_23 on 05-9-200709:46 AMIf you hook the standard analog video outputs of the PS2 (the ones that would go to the TV) into the Video Editor and get into the VidCap applet (free download from the Creative Website), drag the Preview window so its full screen, then you can use your laptop or desktop as a "TV".
-Chrisi -
Basic questions about connection sharing and radio mode
I just got TC and have a couple of basic questions.
At home I have a D-Link ADSL modem/router (no wifi) plugged into the wall, and would like TC to provide wifi. I've connected the WAN port to some LAN port of the router and everything works fine. The intented usage of the setup is wifi-only. Would you recommend TC to do DHCP/NAT? Or is Bridge mode better? In the latter case I don't fully understand who's routing the wifi network (though it actually works).
Second question is about radio mode. My wife has an iBook G4 that is not capable of talking 801.11n, so I selected the n mode compatible with b/g. In that mode my black MacBook will still be able to talk 801.11n with TC? The iBook has very low usage, it is fine that computer uses 801.11g for TC, but I'd like the MacBook to go full-speed. (If that's not possible I'd ponder purchasing an 801.11n adaptor of some sort for the iBook.)Would you recommend TC to do DHCP/NAT? Or is Bridge mode better?
It doesn't matter.
In the latter case I don't fully understand who's routing the wifi network (though it actually works).
The D-Link modem/router.
In that mode my black MacBook will still be able to talk 801.11n with TC?
Yes. It will only suffer lower bandwidth if the iBook G4 is actively connected. -
Question about connection to firebird database
Hi I'm a new JDBC programmer. I picked firebird because the application I wanted to make needed a server-less database. The database was easy to set up (I'm using the classic version of firebird) with isql, and I am now trying to access it through the JDBC. Here is my code, I know the code may be crude looking (I am new to it).
try
Class.forName("org.firebirdsql.jdbc.FBDriver");
Connection con = DriverManager.getConnection("jdbc:firebirdsql:localhost/3050:C:/test.gdb", "sysdba", "masterkey");
catch(ClassNotFoundException e)
System.out.println(e.getMessage());
catch(SQLException e)
System.out.println(e.getMessage());
}With this code, I recieved the following exception...:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at DatabaseBoundary.hire(DatabaseBoundary.java:16)
at DatabaseBoundary.<init>(DatabaseBoundary.java:9)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at bluej.runtime.ExecServer$3.run(ExecServer.java:808)I have the most updated version of the JDK, and I have the most updated version of firebird (as of March 24, 2008 9:48 PM EST). I don't know why I am getting the UnsupportedClassVersionError, all help would be greatly appreciated. :)well, apparently you do NOT have the correct version of the Java runtime set up as the one you're actually calling, as that's the only thing that can cause this error.
Most likely there's fragments of an older installation left floating around the system in directories that are higher in the path than your JDK.
Check for example your windows/system32 directory for java*.exe and if they're there, remove them.
After that set up your system path correctly to point to your JAVA_HOME/bin (you should also define JAVA_HOME in your environment variables to point to the JDK installation directory).
The Firebird driver I think is compiled against JDK 1.4, maybe 1.3, so the error is almost certainly caused by your own code being compiled against 1.6 and you're attempt to run it (unwittingly) against 1.5. -
Question about connecting two monitors to Mid 2010 MBP
I have a Mid 2010 MacBook Pro (running OS X, 10.6.8), and I want to connect it to two ASUS monitors (VS228H-P) that have HDMI, DVI, and VGA interfaces.
1) Is this possible?
2) What parts will I need to make the connection?
3) Will I be able to close the lid without the MBP going to sleep?
4) Any recommendations for an external mouse and clickety-clack keyboard? (My preference is for wireless, but I'm open to wired, too).
If there are other recommendations for configuration (I'd like to spend less than $150/monitor. They won't be used for gaming, but for working from home and watching various media...)
THANKS!!!Hi kishap8,
Have you made changes in the display settings to make the PC use both monitors? It doesn't extend the screen on it's own.
Here is an HP Support document on how to change display settings: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03366869&cc=us&dlc=en&lc=en&product=5309983
And here are a couple videos (for Windows 7 that is very similar to Win 8) on how to work with multiple monitors:
https://www.youtube.com/watch?v=Nj0RT8yVlUA
https://www.youtube.com/watch?v=WDQCXOSJGM0
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
Question about connection between cache engine and cat6k
Dear sir,
Here is the problem description, please give me some help, thank you so much:
catalyst 6509 is enable for wccp v2.CE 7320 also enable the wccp v2.Wccp service 91 is configured on 6509.Service-munber 91 and port-list 1(with port number 8080) are also configured on CE 7320.Wccp communicates well about service number 91.
but browsing web page with port number 8080 gets always failed.
1.6509 wccp configuration:
ip wccp web-cache redirect-list 30
ip wccp 91
interface Vlan10
ip address 211.162.224.2 255.255.255.240
ip wccp web-cache redirect out
ip wccp 91 redirect out
2.ce7320 wccp configuration:
wccp router-list 1 211.161.1.49
wccp port-list 1 8080
wccp web-cache router-list-num 1
wccp service-number 91 router-list-num 1 port-list-num 1 application cache
wccp version 2
3.show info. from 6509 and ce 7320:
gwbn7320#sh wccp content-engines
Content Engine List for Service: Web Cache
IP address = 211.161.1.50
Routers seeing this Content Engine(1)
211.162.224.2
Content Engine List for Service: WCCPv2 Service 91
IP address = 211.161.1.50
Routers seeing this Content Engine(1)
211.162.224.2
gwbn7320#sh statistics http savings
Statistics - Savings
Requests Bytes
Total: 90685 460066803
Hits: 936 162710
Miss: 89749 459904093
Savings: 1.0 % 0.0 %
6509-left#sh ip wccp
Global WCCP information:
Router information:
Router Identifier: 211.162.224.2
Protocol Version: 2.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 2525
Redirect access-list: 30
Total Packets Denied Redirect: 0
Total Packets Unassigned: 146
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Service Identifier: 91
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 0
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Regards,
ShaGilles,
Thank you!
Here is the result:
6509-left#sh ip wccp 91 detail
WCCP Cache-Engine information:
IP Address: 211.161.1.50
Protocol Version: 2.0
State: Usable
Redirection: GRE
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 180
Connect Time: 00:07:06
Regards,
Sha -
Question about connecting to internet without using Wi-Fi
This is a potentially dumb question, but I am a brand-new iPhone user and former Treo user, so I am used to a different set-up when it comes to connecting to my mobile carrier's data network. I can successfully connect my iPhone to my wireless (airport) network, but when I'm out on the street, I thought that the AT&T data network would pick up where the wireless left off. But, nothing happening. I'm used to the Treo having a VPN settings page. On my iPhone, there are no VPN configurations. I signed up for a data plan with AT&T, so I thought they would have configured the phone with the settings. Can anyone fill me in on some missing information? Thanks!
I did some more digging for information last night and figured out how to get online when not connected to WiFi. Thanks! Problem solved.
This page: http://www.apple.com/support/iphone/troubleshooting/calls/
explained it all to me. -
Question about CONNECT BY PRIOR
Hi,
I have a table (genealogy table.). I have child id, father id and mother id. I'm trying to built a request to be able to see the family tree : mother, father, grandfather, grandmother, etc.
I need some help about how to retrieve it with the CONNECT BY...
Thanks in advance!Hi,
Gaétan Francoeur wrote:
I would like to retrieve : LILI, her parents and grandparents, and so on...
I put the names, but in real life it would be into another lookup table.
ID NAME FATHER_ID FATHER_NAME MOTHER_ID MOTHER_NAME
05 LILI 20 PAWZ 30 RHIANNON
15 MAX 20 PAWZ 40 BEAUTY
20 PAWZ 50 DEXTER 60 FAY
60 FAY NULL NULL NULL NULLOne more time: post CREATE TABLE and INSERT statements for the data in your table (or tables), and post the results you want from that data (formatted, between \ tags).
Did you try what I posted in my first message?SELECT *
FROM genealogy
START WITH name = 'LILI'
CONNECT BY id IN ( PRIOR father_id
, PRIOR mother_id
I can't try it; I don't have a copy of the genealogy table yet.
This sounds like an interesting project, but I can't help you without a version of your table, even if it's very small, and I need to know exactly what you want to produce from that table.
Edited by: Frank Kulash on Jun 16, 2010 10:39 AM
Fixed typo -
Question about connectivity of bluetooth keyboard ...
Hello All,
I wanted to ask a few things regarding the bluetooth keyboard's connectivity with nokia 5320
that will i be only limited to write through the keyboard in the sms etc ?
or while browsing through my mobile or using ebuddy on my cellphone,i'll also be able to write through the keyboard there in ?That all depends on which tablet you are using. If it happens to be a windows 8 tablet that has a full USB port on it you can get a USB hub to share that port to multiple devices and plug everything in that way.
If it is an android tablet however you may have to connect a the mouse and keyboard via bluetooth, and then the printer over wifi which should work on windows as well.
If you let me know exactly what tablet and printer you have I might be able to find the best possible solution for those devices.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
General Question about connectivity of printer with tablets
I want to know what are the possible ways to connect a tablet with keyboard -mouse and printer simultaneously
That all depends on which tablet you are using. If it happens to be a windows 8 tablet that has a full USB port on it you can get a USB hub to share that port to multiple devices and plug everything in that way.
If it is an android tablet however you may have to connect a the mouse and keyboard via bluetooth, and then the printer over wifi which should work on windows as well.
If you let me know exactly what tablet and printer you have I might be able to find the best possible solution for those devices.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
2 questions about connection speeds
Hello,
First up: I've been using the same ISP for 3 years now, at the same apartment, and my top download speed has always been 1.5Mbps (roughly 185K/s). For some reason my top download speed "now" is precisely 150K/s, and it's been that way for the past week or so. (And this speed limit affects all my internet-aware apps.)
Is it possible that I've set an OS-wide download limit without realizing it?
Second question: I'm using MenuMeters to determine my connection speed. When using Transmission, a Bit Torrent app, I can also read it's total downloading speed. When MenuMeters tells me that my total download speed is 150K/s, Transmission tells me that it's only downloading at 135K/s.
Trouble is that Transmission is the only app running. And indeed if I pause the downloads, MenuMeters indicates 0K/s (so there are no other internet-using apps running). Since I haven't found any report of speed errors on the Transmission forum, I don't understand this incoherence.
Any ideas?
Thanks
LoaHello,
Tom: very close to what MenuMeters was telling. So I guess Transmissions has some bugs.
But that doesn't solve my other problem: why isn't my top speed 185K/s anymore? Can this be on my side, or is it entirely up to my ISP?
Thanks
Loa -
About connecting USB printer(s) from Windows Server (NT or above).
My friend have a Power Mac G4 which have Mac OS 9 installed.
He found out that he could not add a printer in his LAN, which used Windows NT server as the main server in the LAN. He have tried to configure "AppleTalk" and "find neighbourhood" in USB printer sharing, both trials were unsuccessful. In find neighbourhood, it returns "No zones found".
He was sure that all cables and LAN cables are properly plugged to the G4 and was sure that the networking device in G4 works fine.
Any solutions to this?
Thanks.
Leo Yim
Power Mac G4 Mac OS 9.0.xWelcome to discussions
I do use a Canon PXMIA-USB-printer on a LAN with Windows 2000 pro(printer connected there),Xp,and PowerMac 7600/OS9.1. I use DAVE from thursby.com to connect to the windows PC's-get the printer via DAVE client.
To try you can download a free trial from thursby. -
Questions about connecting second monitor to HP 610-1015xt TouchSmart AIO
Hi,
I have a HP 610-1015xt touchsmart PC with AMD Radeon HD5570. Now I've gone through all the similar questions on this forum and I still had a couple of my own or needed some more calarity on some.
I've read time and again that one should use the second monitor in "clone" mode istead of "extended" mode because TouchSmart software is not compatilable with exteded mode. Now does that simply mean that my PC may show erratice behavior if I try to use touch features while in extended mode and second monitor connected? Because if that's the only issue, I can live with it as I don't use touch features at all. Also, will dsiabling touch help in any way?
Is anyone here using a second monitor in extended mode on a touchsmart? Have you guys faced any issues?
Also, what I'm trying to find out is if things will run smooth if I connect a HP 32" Quad HD monitor with 2560 x 1440 resolution? I have found a adapater called Plugable USB 3.0 to HDMI adapter which supports 2560 x 1440, I'm just trying to figure out if my PC will be able to hadle it? If anyone has any knowledge on this, please do share. Because if I can't get the full resolution, I will just settle for a full HD screen.
People, please do share your experinece or suggestions. Any help will be greatly appreciated.
Thank you,
JayJay, I own a notebook without touch but a monitor with touch. I use my monitor as extended monitor. The touch works fine on the extended monitor and works without touch on the notebook screen. I do not face any issues in using this way. Depending on my need, it switch my primary display to the extended touch monitor or notebook screen. Whether it is the primary display or not, when in extended mode, the touch works fine on my monitor.
Regarding the other question on Quad monitors, my knowledge is limited. Sorry for not being able to answer that part of the question.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***
Maybe you are looking for
-
Unable to capture Action_Success event during update
Hi I am using SAP-B1 2004. Using UIAPI, i am trying to do something when an item information in item master is updated. On update button click i am capturing the Before_Action =True event to do something. If the Item information is successfully updat
-
Is There A Cheap Or Even Free Way Of Recovering Deleted Files?
I tend to be a bit quick at trashing things and emptying the trash! Sometimes I wish I hadn't - but so far I have never had a catastrophic loss. I know there are companies, who, for a small fortune can recover data, but is there any cheap DIY method
-
Cloud Services deployment stuck in 'The deployment is being created.' for 2 days.
Deleted the deployment. Then tried to publish to it, it was stuck in 'The deployment is being created.' then eventually the publish fails with 'The deployment allocation failed due to an internal error. Please retry later or in a different region.'.
-
Dear all, I'm done with the post installation steps for P17.0 SR2. When I login to IR and ID, no objects are found, and to test a file to file scenario. I checked for adapters here RWB -> Component Monitoring -> Adapter Engine -> Adapter Monitoring ,
-
Basic graphical question (actionscript/flashbuilder)
I'm a totally newbie trying to create a library of graphical components that I can reuse in applications. I've created two projects in my workspace, one for the widgets and one for the application. When I draw the components onto the design screen, t