2 questions about lightroom 3 and windows7

Hi
i have 2 questions
1) i get lots of errors shutting down lightroom 3
should i setup run like administrator ? i mean right click on l3 , and click on run like administrator to avoid this error (i guess the error is ntrl.exe)
2) about the exif browswer
i 'm a lightroom 1.4.1 users
i did not like lightroom 2.x , but i gave a shot to lightroom 3 and i like it a lot , i guess i will upgrade soon
1) may i customize the tool tip information ?
i mean when i move the mouse over the thumbs, the tool tip pop up?
i get few informations , can i customize and add more exif information
2) there is the exif browser in the 1.4.1 ,in lightroom 3 the exif filter
i know bridge cs4 and cs5 can read subject distance
is there a way to edit and add subject distance in the exif filter?
i mean the exif drop down list is poor ,there are not many exif items
thanks
windows 7

1) may i customize the tool tip information ?
i mean when i move the mouse over the thumbs, the tool tip pop up?
i get few informations , can i customize and add more exif information
Yes, you can. Tooltips show the same information you see in Loupe Info Overlay. Customize the overlay and you change what tooltips show. Also you can customize what the the thumbnail borders themselves show. For example, right-click on the file-name or rating label, and you can change to something else.
2) there is the exif browser in the 1.4.1 ,in lightroom 3 the exif filter
i know bridge cs4 and cs5 can read subject distance
is there a way to edit and add subject distance in the exif filter?
i mean the exif drop down list is poor ,there are not many exif items
No. You can only read the focus distance in the Metadata panel.

Similar Messages

Curious question about Lightroom previews and Camera Raw Cache

Posted in the Flickr Lightroom Group as well:
I have noticed something about the Lightroom (3.6) previews and Camera Raw cache that have me puzzled.
I create a brand new empty catalog and purge the Camera Raw Cache.
Then I import ONE Nikon RAW (NEF) file with dimensions 2592 x 3872 (10 megapixels - 10,036,224 pixels).
Next I export that NEF file to an uncompressed 8-bit TIFF file. You would expect the size of that TIFF file to be roughly 30 megabytes (10 megapixels x 3 bytes per RGB value) and in fact the TIFF file is 30,135,830 bytes in size. If you export the same TIFF file but specify ZIP compression the resulting file size is 10,834,038 bytes. Obviously the compression obtained here is going to be highly specific to the image but so far no surprises.
During import I specify render 1:1 previews and I go into Loupe mode and view the entire image at 1:1 size. I also visit the develop module and do a bunch of manipulations on the image but no cropping.
At the conclusion of all of that I exit from Lightroom and examine the size of the Camera Raw Cache folder as well as the Lightroom previews folder. It would be my expectation that the previews folder should have a rendered full image and that the Camera Raw Cache should also have a rendered form of the raw data. What would you expect the size of those respective folders to be?
In fact - in my trials the previews folder totals a mere 1,675,264 bytes and the Camera Raw Cache which contains one DAT file corresponding to the one cached image is merely 267,374 bytes. This does not seem like nearly enough bits to preserve the rendered image nor is there a full size image tucked away in the actual catalog either - that file is not large enough to contain that. And yet I can use Loupe mode at 1:1 size and move from image to image with no loading delays (even when importing multiple files).
I'm wondering if I've missed something obvious in my analysis and if not, whether someone might care to speculate as to what magic Adobe is practicing here. Even if we grant them some special algorithm to compress their previews I don't see how they can achieve a compression so much greater than the ZIP-compressed TIFF file achieves.
And for those that might think to ask - I've repeated these experiments with multiple raw images and on both the PC and MAC platforms.
I look forward to some answers or interesting theories or perhaps someone might replicate the experiment and report findings.

MadMan and Hal - thanks so much.
So that was my D'Oh moment of what I was missing - the use of re-rendered JPGS as previews. That certainly does fit with the file sizes I am seeing. I had naively assumed that the previews might have tried to preserve the full fidelity of the image - But as you suggest that full fidelity is likely only there in the develop module.
This perhaps explains another observation from the Develop module - moving from one image to another might display "Loading" either briefly or across a longer duration. My guess is that the length of the loading process might have to do more with what is cached in RAM than cached on disk in the camera raw cache. More of a shame then that 64-bit Lightroom on 64-Bit Windows cannot grab more RAM than it seems to do at present.

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the proble

I have a question about Lightroom 5... I used it last night, I go to get on it today and its will not open. I have an error msg "Lightroom encountered an error when reading from its preview cache and needs to quit" Lightroom will attempt to fix the problem when reopened

https://forums.adobe.com/message/6219922#6219922
See if the issue in the thread above helps you to solve your problem.

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

Two questions about Camera Raw and Lightroom

I am now shooting in RAW image format only and cataloging those images into Lightroom.
My first question is: How do I open an image in Camera Raw from Lightroom? When I right click on an image in Lightroom it gives me a choice to edit in > Photoshop, but does not offer the choice of editing in Camera Raw. In fact, when I go outside of Lightroom and just double-click on one of those RAW images, it opens in Photoshop. What is going on? Before I installed Lightroom, double-clicking on a RAW file would cause it to open in Camera RAW.
My second question is: Lightroom seems to have all of the same controls over processing a RAW image as the Camera Raw plug-in does. Does that mean I no longer need to open images in Camera Raw? Should I just do all of my adjustments inside of Lightroom? I take it that the sidecar xmp file is the same whether modified in Lightroom or in Camera Raw.
Pleas set me straight on this.
Thank You,
Ken

Your second question:
My second question is: Lightroom seems to have all of the same controls over processing a RAW image as the Camera Raw plug-in does.
Answers your first. Lightroom and ACR share code, so the rendering you get from Lightroom with the same settings is exactly the same as in ACR. What happens is that when you say "edit in Photoshop", ACR gets called by Lightroom and the Develop settings get passed along. ACR then renders the RAW with those settings and opens it in Photoshop. So, because you already have a working interface to the settings, there is no point in showing them to you again.
Does that mean I no longer need to open images in Camera Raw? Should I just do all of my adjustments inside of Lightroom?
That depends on your workflow. I no longer open any images in ACR directly as Lightroom provides a more effective interface in my opinion. Other people I'm sure prefer the Bridge/ACR approach.
I take it that the sidecar xmp file is the same whether modified in Lightroom or in Camera Raw.
Lightroom does not modify the sidecars by default. All edits are stored in the database. This allows you to have virtual copies with different Develop settings and more tricks like that. You can have Lightroom write out xmp sidecars by choosing "save metadata to file" from the metadata menu in Library or by turning on automatic xmp file generation in preferences. There is usually no real point to doing that however as the "edit in Photoshop" route works just fine. It's only really useful when you have a mixed workflow that still uses Bridge. If you share images with others, you're better off exporting dngs, or exporting subsets of images as catalogs with the images included.

General question about iTunes Match and multiple libraries

Hello to everyone,
I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
Thanks a lot.

Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

Question about Id3-tags and song managem

Hello, I am getting ready to buy a Zen Touch 20GB in a couple of weeks and I have a few questions about the management software.
(Correct me if I am wrong about something)
) Are songs organized into groups by Genre instead of just folders like on the Ipod?
2) Are Id3-tags used instead of filename for identification?
3) What parts of the tag are needed besides title and artist?
4) Which version of tags does the Zen Touch recognize: Version or Version 2?
5) If I edit my tags using an external program such as Id3-TagIT, will the tags carry over to the Creative software and to the player?
Thanks a lot for your help. I want to make sure I have my music collection in order before I get my Zen Touch.

euph_jay wrote:Ok, so lets say I have all my music in folders right now seperated into different categories on my hard dri've. Some folders denote the artist, some the album, and some a genre. Example: Folder: Chicago Contents: Chicago .mp3 files Folder: Techno Contents: various Techno artist's songs What is the best way of organizing my folder system, so that the transition will be easy to the player?
Folders are pretty much irrelevant. What the software will do is look at the *tags* in the files and then use these to build the player's library.
Will imbedded folders work on the player? (like Techno->Crystal Method->Cystal Method .mp3's)
Again the player has no concept of folders, although if you set Techno as a Genre tag you will be able to view via this in the Music Library.
Or, am I misunderstanding how music is stored into the mp3 player. Instead of storing music in a "folder like" system (like the Chicago folder or Techno folder), does it store all the songs individually on the device? Then you have to sort it by artist, album, or genre?
Using your example, in the Music Library you have essentially three categories: Album, Artist, and Genre. So under Album you would see "Vegas" (the Crystal Method's album), under Artist you would see "The Crystal Method", and under Genre you would see "Techno" (and then either the album or artist under this... I forget which it is offhand).
Make sense?

Few questions about apex + epg and cookie blocked by IE6

Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/

I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

Question about Payment term and due date

Hi experts,
I encouter a question about payment term:
I have the payment term ,the baseline date,document date and posting date.How can I get the due date??Is any SAP function module can calculate the due date?
Thanks a lot in advance.
Villy.Lv.

Hi guys,
we can use this FM FI_TERMS_OF_PAYMENT_PROPOSE to get the Days for net due date and add it to base line date,then we get the due date.
BR and thanks a lot.
Villy.Lv.

Question about metadata filtering and document sets

Hello,
I have a question about the metadata filtering when using document sets.
When i use the metadata filter for example for "Installatie: P00001" it shows.
But i wan't to show only the document set and not all the documents. Is this possible OOTB?

Hi striker,
You can add the "Content Type" in Hierarchy Fields for your list, then click the "Document Set" to filter the document set type item, then you can input the "P00001" in Installatle key filter, click apply, then it should show only document set
items with field value P00001.
http://office.microsoft.com/en-001/sharepoint-help/set-up-metadata-navigation-for-a-list-or-library-HA102832523.aspx
Thanks
Daniel Yang
TechNet Community Support

2 questions about lightroom 3 and windows7

Similar Messages

Maybe you are looking for