2 questions T3i recording to external source.

How do I get the info on the screen to dissapear so it only shows the picture?
I want to record to my avermedia ez recorder plus so I can record longer than 12 mins, also, where can I find hd component cables for the t3i?

Timmyg1978,
When you are viewing an image on the LCD, to change what information is displayed all you will need to do is press the <INFO> button.
In regards to using an external recorder, when the camera is in the process of recording or sitting idle, the signal coming out of the camera is not the same as what the final recorded video will be.  In order to get full HD video to the recorder, it must be recorded with the camera first, then played back into the recorder.  The limit will still be about 12 minutes of video.
Also, the EOS Rebel T3i does not have HD component outputs.  It outputs HD video via HDMI.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Recording from external source

    I am brand new to Mac / switched from pc a week ago. not able to figure out some things yet and havent found answers in support. mostly on the basic stuff. like I was able to record audio from a lp turntable on a pc. it looks like there is no recording program built in to the iMac, or am I wrong? will I have to purchase some type of software to record from external record or tape source?

    Sorry some heavy-handed moderation has been going on here. I accidently duplicated my post when I edited it to say 'Welcome to Apple Discussions'. Then I asked the mods to remove the first post above and they've gone and deleted my second post and yours; I am sorry about that. 
    You posed a question about Real Instruments in the absent post. A Real Instrument can be a microphone input or any device that connects to the Audio-In port (or a USB/Firewire Audio device).
    Hope that helps.
    mrtotes

  • Trying to record from external source, no region created...

    Hey everybody. Trying to record into Logic. My aim is to record sets from Ableton but at the moment I am just trying with a simple microphone. I have set my audio record path to a folder on the desktop. I have created an audio track and chosen its input source: stereo input 1 & 2. The track is armed for recording and there is a good level showing. My soundcard is outboard. A Mackie d.2 Firewire Mixer. When I hit record I get the red display along the timeline of the arrange window, the playhead moves but no region is created. When I look in the Audio window there is no file showing there either. When making tracks ordinarily with Logic I never have any problems bouncing stuff and the audio interface is always recognised. The same applies when Ableton is working in rewire. I get a signal easily enough as its routed via my mixer same as with the microphone. Funnily enough I can record into Garageband no problem but as I have Logic its about time I got to the bottom of this. I bet its something really simple I have overlooked. Anyone got any ideas?
    Powerbook G4   Mac OS X (10.4.10)  

    Just to add some further info... what it does seem to be recording are midi input messages when I slide the crossfader of my mixer. A region is created but when I click on it the matrix edit window opens... no audio in sight. What am I doing wrong?...

  • How can I monitor audio that I am recording from external source?

    I am recording music from LP records (vinyl) and need to be able to listen to it while recording. It is impossible to know when a track is finished if you can't hear the music from either internal speakers or headset. Is there any way I can passthrough the sound from line in to internal speakers or headset?

    Look at LineIn for audio playthru.

  • Validate data in r/3 while upload frm external source to bw

    Hi
    My requirement is while uploading data(2lacs to 5lacs of records) from external source file(xls or notpad) to BW i have to check whether that data is present in R/3 system or not.
    can anyone suggest the best way for validation(any FMs exist) for performance sake
    and also provide the FMs all which gives the best performance.

    u need to explan it in more detail...
    process
    Document number
    matching keys with SAP for validating records
    etc
    etc
    regards
    madan

  • Record External Source (bit/hz config?) Nothing But Static

    :Record External Source (bit/hz config?) Nothing But StaticY Okay - I'm ready to be mutilated for posting this, but I've searched for HOURS so feel free to talk to me like I'm a total noob/fi've year old (but a smart fi've year old).
    I just purchased the PCI Express X-Fi Xtreme Audio card am I am trying to record the audio from?an external source (my?DirecTV receiver.)? I have the optical cable directly connected from the receiver to the S/PDIF-IN and all other cables (HDMI) disconnected.
    A few questions:
    -Do the settings (control panel>sound>recording) for bit/hz have to match those of the Creative MediaSource?
    -Can you record directly from a DirecTV HD-DVR?
    I've tried a lot of different settings and all I get is NOTHING but white noise/static and?the pitch/rate varies depending on the settings I am using. I'm lost.

    >? <img align="top" width="577[/img] src="http://i44.tinypic.com/2d7zytk.jpg" alt="options" height="440">
    I am using console launcher and there you have to set your recording source.......do you see where I have hovered over the recording source where it gives me three choices? Here you can pick yours. If you have the wrong source you will get static. In your sound, recording properties, there you can set your default bitrate.
    If you have the wrong recording source, it will sound like white noise, or intermittant jibberish. I have never done a session of which you speak, but I am guessing when you have plugged in your digital satelite, you can try the "What U Hear"? feature to record sound to make sure your sound is being picked up on the PC. Then change your source to pull directly from the digital in.
    cheers,
    jmacguire

  • How to record from an external source

    I recently bought a hp envy 17" and I cant figure out how to record onto this laptop.  I have to jacks on the left side, one with an icon of a headphones, the other with an icon of a headset.  I want to be able to take input a stereo jack to record into one of these and record into a program like Audacity.  Under device manager it says I have an ATI High Def Audio Device.  How do I record from an external source?  Thanks.

    @toolchic, first make sure that in the IDT HD Sound properties [right click the IDT ICON near the clock, which says "Controls IDT Audio Settings" on mouse over the icon], and choose "Open Audio control panel".
    Next choose "Recording > Settings". Here choose the input you want to record with. In your case choose "Integrated Microphone Array" on the top left. Click "Settings" just bellow, slide the bar to "10db boost" on the right, and slide the recording level bar about midway up [at the bottom of the window where all the volume controls for all recording devices are].
    While you/re there, it's a good idea to mute the "External mic", and mute any other recording device that you do not need. Next, click the "Processing" tab below the settings tab, and choose "Reduce noise". Leave all the others unchecked. for these will produce a not so nice sound. This helps to eliminate fan noise and other background noise in your recording.
    Now when you open your preferred digital audio program e.g.. Audacity [it's free and pretty easy to use, see link below], you can choose the INTEGRATED MIC ARRAY in the recording options. Choose that and then "arm" the track for recording [Usually an icon with R in the recording controls] Next click "record" to begin recording. Of course these steps depend on the digital audio recording program you're using.
    If you don't have a dedicated digital audio recording program, and if you have windows 7 or vista, you can record long sessions with the default Microsoft recording program [this program is useless in XP, for it only records for like a minute or so, maximum!. A dedicated program such as Audacity records depending on how much hard drive disk space, or close to that.
    @fritz, in essence, input jacks of most current notebooks, external computer mics are mono, but they use a  stereo mini jack [or 3 band, if I understood you correctly]. These are the same as regular earphone jacks. One band is signal, one is earth, and the other is +5 Volts to drive the condenser [these are known as "condenser mics"]. But if you use a dedicated studio type recording mic, then you need a dedicated preamp, and if it is a condenser as apposed to a dynamic mic, the preamp needs to supply what's known as "phantom power" [typically 45v] through the input jack where the mic is plugged into.
    However, if you record from the mic in/line in jack of a line out of say a mic preamp, channel mixer deck, CD/DVD/TV etc., then this has to be a stereo mini jack [has 3 bands]. Special cables with 2 [stereo] RCA jacks to mini jack are the ones to use. That is if the line out connector of your recording course is RCA [your typical TV/CD//DVD audio / video out or in are RCA connectors e.g..].
    Did this help?
    http://audacity.sourceforge.net/download/
    be-well

  • How to merge key field from external source system with SAP R/3 master

    Hi,
    In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
    This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
    To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
    0GL_ACCOUNT      Short Description     Source System
    100                                   D1                          R/3
    200                                   D2                          R/3
    300                                   D3                          R/3
    400                                   D4                          R/3
    500                                   D5                          R/3
    Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW  ZDSO_FI-
    GL_file      Key Figure1
    400          789
    200          567
    Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
    0GL_ACCOUNT      Short Description     Source System
    400
    200
    100                                   D1                          R/3
    200                                   D2                          R/3
    300                                   D3                          R/3
    400                                   D4                          R/3
    500                                   D5                          R/3
    So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
    Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
    Thanks in advance.
    Nirmit

    Better post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.

  • Creation of PM or CM WO by external source

    I believe my request is pretty much standard, however I didn't find any info in existing threads.
    If I need to initiate a WO execution based on an external source (for example, a message from Plant automation system) - what is the way to do it?
    In my understanding, there must be a standard feature for SAP PM to "listen" to, say OPC server, and act upon certain condition.
    Thank you in advance for help.
    Edited by: RenatF on May 21, 2010 4:57 AM

    RenatF,
      Unfortunately SAP cant "Listen" to external systems,Unless its visible inside. However as indicated above if the external systems can communicate the data(Either the exception or all the data records for a Particular Business scenario), then it can react based on the data and we could have SAP generate Transactional / ,Master data objects accordingly.
       There are [different ways a communication|http://help.sap.com/erp2005_ehp_04/helpdata/EN/18/da766aaf5311d6b29f00508b6b8b11/frameset.htm] can be established between a external system and SAP. The choice of the pattern depends on the what the external system can do and what are the standards maintained or are required to be maintained. Some examples of communication technologies  are
    1) RFC (Remote Function call)
    2) IDOC (Intermediate Document) / ALE (Application Link Enabling)
    3) BAPI(Business Application Programming Interface)
    4) Through a Middle ware (SAP XI , MQ series, Business connector,.Net Connector etc)
    5) SOAP Framework
    6) Web services
    There are standard content  available in all of them.
      So if you could specify what you are trying to accomplish and what is available at your end, we would be able to suggest possible options
    Regards
    Narasimhan

  • How do I record an audio source outside of Logic while in Logic?

    Hi everyone, I have a question I would like to address to the forum.
    How do I record an audio source outside of Logic while in Logic? For example, I would like to record the audio off a youtube video or dvd to be then used in Logic. I am using a Dididesign M-Box Mini for both my audio input and audio output i.e. all sound is coming in and out of the M-Box. I hope this is an easy question to answer (I am a new Mac user). Thanks in advance.
    Mac Pro   Mac OS X (10.4.9)  

    Use the 3.5mm audio out jack on the back of your computer. Connect it to your audio interface, and record like normal. You need an adapter cable. ( 3.5mm stereo to two 1/4 inch mono) see link.
    http://www.musiciansfriend.com/product/Live-Wire-3.5M-TRSDual-14-Y-Cable?sku=330 481&src=3WBZ4DS

  • Recording an external SMPTE Time code during capture

    I have several diffrent devices that I am trying to Sync using a common Smpte Code Generator. How do I record that external SMPTE Source while capturing in Final Cut Pro HD? I am currenly using a AJA Konal LS card for my capture device?

    You can't with Final Cut Pro unless you capture with a tape machine as has already been stated.
    If you have no tape machine you need a provision to insert the timecode into the rs422 datastream, like the [Horita TCI-50|http://www.horita.com/smpteltc.htm#RLT-50] or an [Adrienne|http://www.adrielec.com/box20lit.htm] interface. You may also want to investigate RP-188 timecode which SMPTE says "Transmission of Time Code and Control Code in the Ancillary Data Space of a Digital Television Data Stream." You probably can use [Aja's VTR Exchange|http://www.aja.com/support/kona/kona-lse-ls.php] software which will capture embedded RP-188 timecode if the video you are using does contain RP-188.

  • External Table error: KUP-04043: table column not found in external source

    I am trying to get the syntaxc correct for an external table.
    I keep getting this error:
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04043: table column not found in external source: SITE
    29913. 00000 - "error in executing %s callout"
    *Cause:    The execution of the specified callout caused an error.
    *Action:   Examine the error messages take appropriate action.
    Data looks like: (some of one of many files, where the character field widths are variable)
    ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
    ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
    ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
    ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
    ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
    External table def I have:
    CREATE TABLE MY_INPUT (
    FIRST_CODE VARCHAR2(10),
    SECOND_CODE VARCHAR2(20),
    MY_NUMBER VARCHAR2(20),
    THIRD_CODE VARCHAR2(20),
    YEARMO VARCHAR2(6),
    N NUMBER,
    MEAN NUMBER,
    SD NUMBER
    ORGANIZATION EXTERNAL (
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY INPUT_DIR
    ACCESS PARAMETERS (
    RECORDS DELIMITED BY newline
    BADFILE INPUT_LOGDIR:'bad.bad'
    LOGFILE INPUT_LOGDIR:'log.log'
    DISCARDFILE INPUT_LOGDIR:'discards.log'
    fields terminated by ',' LRTRIM
    MISSING FIELD VALUES ARE NULL
    REJECT ROWS WITH ALL NULL FIELDS
    ( THIRD_CODE,N,MEAN,SD) )
    LOCATION ( 'myfile.rpt')
    NOPARALLEL
    REJECT LIMIT UNLIMITED;
    I have the directories INPUT_DIR and INPUT_LOGDIR defined, and read/write access granted to the user who creates the table and tried to query from it.
    I have tried various combinations of VARCHAR2 lengths and NUMBER vs VARCHAR2 for some of the numeric fields.
    I am not getting any Bad, Log or Discard files.
    I can do a GET from the SQL prompt, and see the data:
    SQL> GET 'C:\temp\input_dir'myfile.rpt'
    and I see the data.
    Windows 7
    Oracle 11.2
    I am not positive of the newline record delimiter - these files are generated by an automated system. Probably generated on a UNIX machine.
    Any suggestions on what to try would be helpful.
    KUP-04043 error message says to check the syntax .. .I am running out of thigns to check.
    Thank you - Karen

    And the get ( I created the sanitized file, so we have a real working, failing, santiized example):
    SQL> get c:\Inputfiles\myfile.rpt
    1 ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
    2 ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
    3 ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
    4 ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
    5* ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
    So the full series is:
    CREATE DIRECTORY INPUT_DIR AS 'C:\InputFiles';
    -- grant READ and WRITE
    GRANT READ ON DIRECTORY INPUT_DIR TO ILQC;
    GRANT WRITE ON DIRECTORY INPUT_DIR TO ILQC;
    -- As SYS, create the bad/log/discard directory:
    CREATE DIRECTORY LOGDIR AS 'C:\InputFiles\Logs';
    -- grant READ and WRITE
    GRANT READ ON DIRECTORY LOGDIR TO ILQC;
    GRANT WRITE ON DIRECTORY LOGDIR TO ILQC;
    CREATE TABLE MY_INPUT (
    FIRST_CODE VARCHAR2(10),
    SECOND_CODE VARCHAR2(20),
    MY_NUMBER VARCHAR2(20),
    THIRD_CODE VARCHAR2(20),
    YEARMO VARCHAR2(6),
    N NUMBER,
    MEAN NUMBER,
    SD NUMBER
    ORGANIZATION EXTERNAL (
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY INPUT_DIR
    ACCESS PARAMETERS (
    RECORDS DELIMITED BY newline
    BADFILE INPUT_LOGDIR:'bad.bad'
    LOGFILE INPUT_LOGDIR:'log.log'
    DISCARDFILE INPUT_LOGDIR:'discards.log'
    fields terminated by ',' LRTRIM
    MISSING FIELD VALUES ARE NULL
    REJECT ROWS WITH ALL NULL FIELDS
    ( THIRD_CODE,N,MEAN,SD) )
    LOCATION ( 'myfile.rpt')
    NOPARALLEL
    REJECT LIMIT UNLIMITED;
    SELECT * FROM my_input;
    and GET is as above.

  • Internal and External sources for OBIEE

    Hi,
    When we say OBIEE can integrates data feeds from internal and external sources..what exactly does this mean. Can OBIEE even do that? Thanks

    Hi,
    We have a requirement where the data sources are from internal and external sources. I was not sure of it too and so raised the question on forums. I am assuming internal sources would be Oracle etc within the system and external would be out of the application. Not sure exactly what is meant by it.

  • Sending email from an external source

    Hi everyone
    Our website is hosted externally and we have a contact form that uses [email protected] as the FROM field but I recently turned on send filter ID which is no longer allowing email from external sources to be routed through the server.  This did accomplish
    what I set out to do but I do need an exception or two and have not been able to get it working.
    I do have an SPF record setup which is working and this is the error message I am getting:
    Diagnostic information for administrators:
    Generating server: scan5.lastspam.com
    [email protected]
    mail.domain.com #<mail.domain.com #5.7.1 SMTP; 550 5.7.1 Client does not have permissions to send as this sender> #SMTP#
    I'm unsure how to give an external IP or domain sender permission on a mailbox. 
    Thanks for your time and help!

    Kab00kie,
    Try this blog.  It's for Exchange 2007, but it should work pretty much the same in Exchange 2010.  Essentially, you create a receive connector, give it the IP's of your website provider (sending IP's)...and the other permissions listed in this
    blog post.
    http://blogs.technet.com/b/exchange/archive/2006/12/28/3397620.aspx

  • Project not picking up changes in external sources

    I have a flex project that's using a couple of other Flex
    library projects as external sources... i have everything setup and
    working nicely.
    Except... if i make a change to one of the library projects
    the flex project doesn't seem to pick it up... for a while... if i
    add a log comment to my library project and build it, then run the
    flex project i don't see the log... if i close down Flex 3 and
    leave it for a bit, then open it and run it again... there it is...
    if i close and immediately reopen i don't see it... seems like
    something is being held in memory... but not sure if this is a Flex
    issue or local to my installation/machine etc.
    Anyone else seen anything like this?

    Sounds like you are seeing a problem with project
    dependencies, and possibly also slow compilation times. Would you
    mind entering a bug at
    http://bugs.adobe.com/jira ?
    If you could zip up and attach the projects that reproduce
    the problem, that will greatly help us investigate. However only
    attach them via the bug form if it is code you don't mind the
    public seeing. If you want to keep it private (but don't mind
    sharing it with us internally), you can file the bug and email the
    code to [email protected], including the bug number.
    If you can't submit the code as-is, I understand, but if you
    are able to strip it down to something basic / non-sensitive that
    still reproduces the problem and submit that, it would be immensely
    helpful.
    Thanks much,
    Tom

Maybe you are looking for